How to keep monitor from returning to log-in screen?

HP Touchsmart 610 with Windows 7:  When watching a movie, how can I  prevent the monitor from returning to the log-in screen every few minutes?
This question was solved.
View Solution.

Hello michin:
           Welcome to HP forum. Wow this is not supposed to happen. Lets start with sleep mode setting to begin with. Left click your mouse any where on your screen. Goto personalize click it. Click on screen saver icon. Change the wait time 20+ minutes. Then right below that click on Change power settings. Next window under Select a power plan select high performance. On the left side click on Choose when to turn off display. Next window set the settings like this:
          Dim the display                    10 minutes     Click on upside triangle to this.
         Turn off the display               15 minutes
         Put computer to sleep            Never
        Adjustment plain brightest      Move slider to far right Maximum. You can still use the dimmer keys afterwards.
       Click save changes. Now close out all opened windows. Finished.
       Now we have to figure out why your computer media is allowing for shutting down. Lets try running a pc tune up and than we will run disk defragmenter and disck clean up and see if this resolves the media issue. Open up HP Support Assistant. Click on maintain. Click on Tune up. Next window click on  view settings. Next window click on Click here to display (Bar).....
Put a ckeck mark in all display boxes check mark apply then click on OK. Next window click on Tune up now.
        After this is completed close it out. Now goto accessories then click on system tools Cick on disk defragmenter click  on Analyzed disk then when it finished click or Defragment disk. When finished close it.
        Now go back and open up  disk clean up. Click on Ok and follow directions given. Hopefully this will fix the issue. If not then you need to tell up what program you were using so we can help reinstall it again.

Similar Messages

  • Hello MacBook Pro Musicians- I cannot read sheet music from the ipad. It is too small. I want to connect a large monitor, hopefully wirelessly to my 13 inch macbook pro. what would I need to connect ? Any suggestions on how to keep monitor from falling?

    Hello Macbook Pro Musicians--I cannot read sheet music from my 13" macbook or from an IPad. The print is too small for these aging eyes! So I need to get a large monitor to attach to the Macbook.  I want the monitor to be connected wirelessly or using a blue tooth.  This will eliminate alot of potential mishaps
    when playing out.  Also I am having a time figuring out how I am going to safely keep the monitor on somekind of music stand without falling!!!  Can anyone help me with this?

    Hi Julius,
    As you can see in my profile section, my MBP is older by 5 years, 2GB RAM and with regards to question 1 (Q1), has no problems with having all those programs open at the same time with the possible exception of Photoshop since I use Gimp instead. With twice the RAM and much overall much better specs, Photoshop shouldn't be an issue. But you listed some other activities that might need that additional RAM. But the advise most give is to not get it from Apple but from a third party.
    Q5 - I always get Apple Care. Only had to use it once but it paid for itself that one time.
    Sorry, can't help you much with the questions you really want answered since I won't have a new MBP until (hopefully) next week but for Q4, I believe it depends on the peripheral. My current monitors are too old to allow them to be hooked up in a chain. Supposedly, if the monitors do have the ports, you could via the MBP Thunderbolt port. The speeds are also dependent upon the peripheral. If the external hard drive is using a USB 2 port, you are limited by that speed (480 Mb/s). If it has a Thunderbolt port, then from what I understand, we, my friend, are in for some great times because I believe your RAM will have the ability to access data as fast as it can take it at 10Gb/s (and if will need those kinds of speeds, the 8GB of RAM may be the way to go). The Thunderbolt demos on YouTube where they are accessing four video files from a Raid drive, then sending them back out via Final Cut Pro to a monitor are amazing. I'll probably never push this machine to anywhere near it's limits but I can't wait to see what others do.
    Peace,
    Jeremiah

  • Anyone having the letter n pop up in Address Book Notes?  Anyone able to tell me how to keep this from happening?

    Anyone having the letter n pop up in Address Book Notes?  Anyone able to tell me how to keep this from happening?

    You can upgrade to Mavericks free, just run the App Store program and search for Mavericks. But before you do upgrade I recommend the following:
    1) make sure you have a recent backup. TimeMachine is fine.
    2) Mavericks is somewhat more memory hungry than 10.7 was. You will need 4 GB of RAM and I strongly recommend 8 GB.
    Go back to the Apple menu and select About this Mac - look under the OS info you just looked at. You'll see how much RAM your computer has now. Then click on the More Info button. There you will see your computer info listed as in: iMac, 21.5" mid 2010, for example. Return back with that information and we can tell you how far the computer can be upgraded.
    If you decide to procede and you have enough RAM upgrading to Mavericks is quite simple. Click on the download button and let it do its job.

  • How to backup files from other user logged in as administrator

    RE: How to backup files from other user logged in as administrator AND/OR how to repair drive with "Invalid catalog PEOF"
    Hello,
    My MacBook Pro computer’s hard drive is not booting.
    I booted with the base operating system and ran Disk utilities and I got the following messages:
        Invalid catalog PEOF
        The volume could not be verified completely.
        This disk needs to be repaired.
        Disk utility can’t repair this disk. Backup as many files as possible, reformat the disk,
        and restore your backed-up files.
    The problem is that I have a couple of USERS set up on this computer, and it won’t let me backup the files of the second user.  The folders are locked and I can’t access them, even though I am logged in as the administrator.
    I made a boot disk on my other computer ( a MacPro Early 2008 ) desktop computer with the DiskWarrior 4.4 updater,
    but it won’t boot on my MacBook Pro.
    How can I backup these user files so that I can copy them back once I fix the drive?
    or better yet,  How can I repair the Invalid catalog PEOF on this drive?
    Thank you in advance for your time! 
    Bill
    THIS IS THE COMPUTER
    ================
    17” MacBook Pro 2.8GHZ 4GB Ram (purchased in 2009).
    Model: A1297
    Running Mac OSX 10.9.5

    Try using Disk Utility/Restore to copy the backup to a new location. Please note that this will reformat the destination partition which will erase all data.
    Do a backup. Boot to the Recovery Volume (command - R on a restart or hold down the option/alt key during a restart and select Recovery Volume). Run Disk Utility Verify/Repair and Repair Permissions until you get no errors.  Reformat the drive using Disk Utility/Erase Mac OS Extended (Journaled), then click the Option button and select GUID. Then re-install the OS.
    OS X Recovery
    OS X Recovery (2)
    When you reboot, use Setup Assistant to restore your data.

  • I am running Windows 7.  I have 250 photos from a trip that I want to load to the iPad v 6.1.3.1 and show as slide show (in named order).  I can not see any recent remarks regarding how to keep them from being loaded in date order.

    I am running Windows 7.  I have 250 photos from a trip that I want to load to the iPad v 6.1.3.1 and show as slide show (in named order).  I can not see any recent remarks regarding how to keep them from being loaded in date order

    By default the photos will be sorted by the date modified.
         iOS: Understanding photo sorting
    Edit (touch) them in the order you want them to be shown.

  • I have a ipod nano 4G, and to sync my music, i have to put my ipod in disk mode. but when i try to turn it on regularly, it gets stuck on the apple logo screen. any idea how to keep it from getting stuck?

    i have a ipod nano 4G, and to sync my music, i have to put my ipod in disk mode. but when i try to turn it on regularly, it gets stuck on the apple logo screen. any idea how to keep it from getting stuck?

    Did you also check under Albums?  All Songs?
    iPod Nano 5th Gen. User Manual

  • Itunes launches itself and starts playing even when my laptop is closed, but I can still hear it. I can't figure out how to keep it from doing it

    itunes launches itself and starts playing even when my laptop is closed, but I can still hear it. I can't figure out how to keep it from doing that.

    See if a device is attached and "open iTunes when iPod is connected" is selected. https://discussions.apple.com/message/16483979#16483979
    Check for other iTunes preference settings that might cause this.
    Hacks to stop Bluetooth speaker from starting iTunes -
    http://forums.macrumors.com/showpost.php?p=19045335&postcount=4
    LincDavis June 2014 post - https://discussions.apple.com/message/25998941

  • I am having an issue where safari keeps crashing and returning to the home screen on an ipad1

    safari on my ipad1 keeps crashing and returning to the home screen. rebooting does not fix the problem neither has a full reset through itunes from a backup or setting up as a new machine. Cab nay body help?

    If restoring from a backup doesn't help, you must have something corrupt in the backup - like a Safari bookmark perhaps - or something in the Safari history. Try the last tip in this list first.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    Close Safari and all apps. Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus (-) sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Go to Settings>Safari>Clear History, Cookies and Cache. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

  • How to keep itunes from syncing everytime i connect my iphone

    how can i keep itunes from automatically syncing my iphone 4 and ipad 2 everytime i plug into my windows pc.  sometimes i simply just want to import pictures.

    Go to preferences in itunes and deselect auto sync

  • How to keep songs from the same album together in the Walkman app?

    How do I keep songs from the same album together in one album instead of it being spilt up into three different albums? Is there any way to keep this from happening? I have all of the correct album information, but it still happens. I thought I would use Media Go and see if it helps but it never works properly. 
    Any suggestions would be much appreicated. 

    Make sure your Album information in mp3 tags is all the same in all tracks belonging to the same album.
    Clear the cache memory of Storage Media service
    https://talk.sonymobile.com/t5/WALKMAN/Multiple-Song-and-playlist-appear/m-p/732329?sl=y&sso_no_log=...
    If, despite having the same album information in mp3 tags and clearing cache memory, you still get multiple entries or songs belonging to the same album are split into 2-3 albums, then I suggest an easy way.
    Use Winamp and create an *.m3u playlist in the same directory you have the mp3 files stored in your phone. This playlist will then appear in Playlists - My Playlists and you will be able to enjoy your music in correct order of tracks and all the tracks will be there.
    That is my method (using m3u Winamp playlists) simply because Walkman app does not respect the Track Number tag in mp3 files belonging to the same album and rather sorts the tracks within the same album based on Date Created.

  • How to keep icons from piling up on the dashboard.  I understand they soak up battery power.

    How do I keep icons from appearing on the iPad dashboard when moving around the Internet?  I understand they use up battery power.

    When you close them from the task bar, you are not deleting the app, just closing it down. Most of them are not using any power at all, just are there because you recently used them, but some do use power, or keep some memory.  It is a good idea to double click and shut them down at least daily, if not more often.

  • How to stop monitor from going black after no activity for a short time while reading a document?

    When I'm reading an e-mail or document without moving my mouse, the screen turns black after only about one minute and then switches to my screen saver.  I must move the mouse constantly to keep my active window open.  I can't find out how to turn this "Energy Saving Feature" off so I can read long articles without being interrupted every other minute.  This has been VERY irritating!
    This question was solved.
    View Solution.

    Hi,
    Open windows Control Panel, open Pesonalization, click the Screen saver link in the bottom right and in the following window, adjust the time in the 'Wait' box to a time you want before the screen saver appears and click Apply. Or if you prefer never to get the log-on screen, remove the tick next to 'On resume, display logon screen'.  Click Apply to save the change.
    Next, open windows Control Panel  again and click Power Options, click the Change plan settings link next to your currently selected power plan and in the following window adjust the time using the dropdown box next to 'Turn Off Display' to a more acceptable setting and then click Save Changes.
    Note:  Set the time in the Power Options menu to be slightly longer than the time you set in the Screensaver Menu or you will never see your screensaver start.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • How to keep someone from changing settings on a Mac

    I have a friend that uses my computer when I'm not around and tends to change my settings and the overall look of the screen. Can anyone tell me how I can keep this from happening?

    Set up Accounts to where they can only Login to a User Account that does not have access to the Admin System Preferences.
    see > Mac OS X: Setting Up User Accounts
    and/or > Mac OS X Tutorial - Setting up user accounts - YouTube

  • How do I monitor the number of logged on users in EP6.0 SP11?

    Hi folks,
    We are on SAP Enterprise Portal 6.0 SP11.
    I want to know the procedure by way of which I can monitor the number of logged on users in the Portal. Again, the logged on users can mean two things:
    1) Number of unique users at any given time
    2) Number of user sessions at any given time
    Now, here are certain things I know:
    1) EP6.0 SP2 had the Logged On Users iView. It's taken out in SP11 though.
    2) The Portal Activity Report can be used for this purpose in SP11. However, we don't have any plans to implement that right now.
    3) The Visual Admin can be used to monitor the user sessions and I am fine with that. However, my requirement is to collect user-load metrics every hour and I cannot really afford to monitor the Visual Admin that frequently.
    4) If I use the J2EE Telnet Admin, I can come to know the number of user sessions.
    As is apparent, I have no trouble getting the total number of user sessions. So, I guess the real question is - Is there any way by which I can know the number of unique users that are logged on to the Portal at any given time?
    Kindly let me know if there is a way for that (other than maybe the Portal Activity Report), and I promise to reward generously
    Thanks in advance!
    Regards,
    Sagar

    Hello Sagar,
    You have to write an application in that u have to use the follwing code
    <i>Step 1:</i>
    import the Files like
    <b>import com.sap.security.api.IUser;</b>
    <b>IPortalComponentRequest request = IPortalComponentRequest)this.getRequest();
    IUser usrSO =request.getUser();
    strSOID = usrSO.getUniqueName();</b>
    <i>Step 2:</i>
    Create a table at DB with the fields like userid Time and required filelds...
    <i>Step 3 :</i>
    Deploy your application and create a iview from PAR
    then create a invisible iview or attach the iview at the end of the page and attach this in every user role
    when the user logged in auto matically his ID will stored in the DB..
    Try to attch this iview in visible mode into System Admin role ..see the Number of users logged in
    But u have to write a efficient application for this
    Don't forget to award points ....
    Sreedhar G

  • How to keep Reader from being installed if running Pro? Running Acrobat X Pro. Occaisionally, a website with a PDF triggers Reader to be installed on my system. NEVER want reader (that's why i bought Pro). How do i keep Reader from EVER being installed?

    Running Acrobat X Pro.
    Occasionally, a website with a PDF triggers Reader to be installed on my system.
    NEVER want reader (that's why i bought Pro).
    How do i keep Reader from EVER being installed?

    I don't get a pop-up. Something triggers the Reader installer to be loaded on my system. This occurs without my knowledge. Then, the next time i go to open a PDF, instead of it opening immediately with Acrobat Pro, I get the first screen of the installation stuff for Reader (Accept/Decline Terms of use, etc.). At this point, i get out of the install, go into control panel and uninstall Reader (which is listed as a loaded program, even though i haven't finished the install). After i uninstall reader and open a PDF, it opens correctly with Acrobat Pro. This happens once or twice a month at least. Is it possible that the Adobe Acrobat Update Service task loads Reader on my system at some interval? How do i block Reader form EVER being installed or loaded?

Maybe you are looking for

  • How to transfer files after booting from external drive?

    My fathers MB Air has been failing to boot, most likely due to lack of space on hard drive. I've come to the conclusion seeing as how its a 2014 model and he has 6 GB's of free space on his main dirve. I've managed to boot his MB Air from an external

  • I'm trying to display the current date and time on my iPad.

    First, I'm not sure this is a valid post to this forum.  If not, I'd appreciate knowg in where I can get help.  I have tried several ways to display the current date and time on my iPad.  None  work.  Most things I try give me complier errors but the

  • Dreamweaver CS3 Scripting Youtube embedding Problems

    I use embeds from youtube on my site. They are usually no problem. Today I upgraded from Dreamweaver 8 to CS3. When saving my files and uploading to the host, CS3 created two scripts that it said were necessary for standards-based sites and applicati

  • Importing excise details for an excisable item

    I want to import the Items through DTW. But these items are excisable items. Is there any seperate template for it. The item.xlt template does not have columns to enter the data like material type, chapter ID,Notification availed srl no.Assesment val

  • No option to open JPEGs with Adobe Camera Raw

    I am not able to open jpg files into Adobe Camera Raw in Bridge or anywhere else for that matter. There is simply no option available in File to open in ACR (there's nothing that's even greyed out). Ctrl+R does nothing also. I just installed CS3 so I