How to kill Hang form ....?

Can some one pls tell me how to kill hang form. I have only[b] Request ID for that
Application 11.5.10.2
Database 9.0.2.6
O/S Linux
Or how to find out PID for hanged From ...?
Thanks,
Amol

Please check the following notes:
Note: 457381.1 - Troubleshooting Tips For Spinning/Hanging F60WEBMX Processes
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=457381.1
Note: 185762.1 - Script How To Identify The apps User Using The O/S PID For Forms Users In 11i
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=185762.1

Similar Messages

How to kill an app which hangs

How to kill an app which hangs or takes a long time to load?
As an example I opened the IE, choose settings --> delete history
the status is: 'Deleting browsing history' for the last 20 minutes and I don't really know how to kill the IE or restart it? The back button doesn't work in this case.
same happens with other apps, like games when there's a limited internet access. Apps may try to load and the back button doesn't work in this case.

It's not that there's no response, cos I can switch apps and other apps respnd. It's just that a specific app hangs (or loads data or whatever) which takes too long for me to wait for and I'd like to kill it.
So the question is - if the phone is generally responsive but one app in the background needs to be killed, can I somehow do this not rebooting the whole device?
edit: just to add: the back button while hold get's me to the app list and I can switch apps and work with others.

How to kill the hanged JFrame in swing?

How to kill the hanged frame in swing?
I am opening multiple JFrame and working on them.These frames are plcaed in JDesktopPane.
If one frame is hanged up then i could not work on others .
I need to kill the hanged frame.
Assist me.

am opening multiple JFrame and working on them.These frames are plcaed in JDesktopPaneWell, a JFrame, can't be added to a JDesktopPane, so your question doesn't even make sense.
As was suggested earlier, if your GUI is unresponsive, then that means you are blocking the GUI EDT and the GUI can't respond to events. Don't do this.
Read the Swing tutorial on Concurrency to understand why this happens and to learn the proper way to write GUI code so it won't happen.

How to kill Forms Runaway Process using 95% CPU and running for 2 hours.

We had a situation at E-Business Suite customer (using Oracle VM server) where some of Form processes were not being cleared by form timeout settings automatically.
Also when user exits the form session from front end, the linux form process (PID) and DB session did not exit properly, so they got hung.
They were spiking CPU and memory usage and causing e-business suite to perform slowely and ultimately causing VM host to reboot the production VM guest (running on Linux).
We could see the form processes (PIDs) using almost 100% cpu with "top" command and running for a long time.
Also we verified those Form Sessions did not exist in the application itself.
ie. Using from Grid Control -> OAM-> Site Map -> Monitoring (tab) -> "Form Sessions".
It means that we could safely kill that form process from Linux using "kill -9 <PID>" command.
But that required a continuous monitoring and manual DBA intervention as customer is 24x7 customer.
So, I wrote a shell script to do the following;
•     Cron job runs every half an hour 7 days a week which calls this shell script.
•     Shell script runs and tries to find "top two" f60webmx processes (form sessions) using over 95% cpu with 2 minutes interval.
•     If no process is found or CPU% is less than 95%, it exits and does nothing.
•     If top process is found, it searches for its DB session using apps login (with hidden apps password file - /home/applmgr/.pwd).
a.     If DB session is NOT found (which means form process is hung), it kills the process from unix and emails results to <[email protected]>
b.     If DB session is found, it waits for 2 hours so that form process times automatically via form session timeout setting.
It also emails the SQL to check the DB session for that form process.
c.     If DB session is found and it does not timeout after 2 hours,
it kills the process from unix (which in turn kills the DB session). Output is emailed.
This are the files required for this;
1. Cron job which calls the shell script looks like this;
# Kill form runaway process, using over 95% cpu having no DB session or DB session for > 2hrs
00,30 * * * * /home/applmgr/forms_runaway.sh 2>&1
2. SQL that this script calls is /home/applmgr/frm_runaway.sql and looks like;
set head off
set verify off
set feedback off
set pagesize 0
define form_client_PID = &1
select count(*) from v$session s , v$process p, FND_FORM_SESSIONS_V f where S.AUDSID=f.audsid and p.addr=s.paddr and s.process='&form_client_PID';
3. Actual shell script is /home/applmgr/forms_runaway.sh and looks like;
# Author : Amandeep Singh
# Description : Kills runaway form processes using more than 95% cpu
# and Form Session with no DB session or DB session > 2hrs
# Dated : 11-April-2012
#!/bin/bash
. /home/applmgr/.bash_profile
PWD=`cat ~/.pwd`
export PWD
echo "`date`">/tmp/runaway_forms.log
echo "----------------------------------">>/tmp/runaway_forms.log
VAR1=`top -b -u applmgr -n 1|grep f60webmx|grep -v sh|grep -v awk|grep -v top|sort -nrk9|head -2|sed 's/^[ \t]*//;s/[ \t]*$//'| awk '{ if ($9 > 95 && $12 = "f60webmx") print $1 " "$9 " "$11 " "$12; }'`
PID1=`echo $VAR1|awk '{print $1}'`
CPU1=`echo $VAR1|awk '{print $2}'`
TIME1=`echo $VAR1|awk '{print $3}'`
PROG1=`echo $VAR1|awk '{print $4}'`
PID_1=`echo $VAR1|awk '{print $5}'`
CPU_1=`echo $VAR1|awk '{print $6}'`
TIME_1=`echo $VAR1|awk '{print $7}'`
PROG_1=`echo $VAR1|awk '{print $8}'`
echo "PID1="$PID1", CPU%="$CPU1", Running Time="$TIME1", Program="$PROG1>>/tmp/runaway_forms.log
echo "PID_1="$PID_1", CPU%="$CPU_1", Running Time="$TIME_1", Program="$PROG_1>>/tmp/runaway_forms.log
echo " ">>/tmp/runaway_forms.log
sleep 120
echo "`date`">>/tmp/runaway_forms.log
echo "----------------------------------">>/tmp/runaway_forms.log
VAR2=`top -b -u applmgr -n 1|grep f60webmx|grep -v sh|grep -v awk|grep -v top|sort -nrk9|head -2|sed 's/^[ \t]*//;s/[ \t]*$//'| awk '{ if ($9 > 95 && $12 = "f60webmx") print $1 " "$9 " "$11 " "$12; }'`
PID2=`echo $VAR2|awk '{print $1}'`
CPU2=`echo $VAR2|awk '{print $2}'`
TIME2=`echo $VAR2|awk '{print $3}'`
PROG2=`echo $VAR2|awk '{print $4}'`
PID_2=`echo $VAR2|awk '{print $5}'`
CPU_2=`echo $VAR2|awk '{print $6}'`
TIME_2=`echo $VAR2|awk '{print $7}'`
PROG_2=`echo $VAR2|awk '{print $8}'`
HRS=`echo $TIME1|cut -d: -f1`
exprHRS=`expr "$HRS"`
echo "PID2="$PID2", CPU%="$CPU2", Running Time="$TIME2", Program="$PROG2>>/tmp/runaway_forms.log
echo "PID_2="$PID_2", CPU%="$CPU_2", Running Time="$TIME_2", Program="$PROG_2>>/tmp/runaway_forms.log
echo " ">>/tmp/runaway_forms.log
# If PID1 or PID2 is NULL
if [ -z ${PID1} ] || [ -z ${PID2} ]
then
echo "no top processes found. Either PID is NULL OR CPU% is less than 95%. Exiting...">>/tmp/runaway_forms.log
elif
# If PID1 is equal to PID2 or PID1=PID_2 or PID_1=PID2 or PID_1=PID_2
[ ${PID1} -eq ${PID2} ] || [ ${PID1} -eq ${PID_2} ] || [ ${PID_1} -eq ${PID2} ] || [ ${PID_1} -eq ${PID_2} ];
then
DB_SESSION=`$ORACLE_HOME/bin/sqlplus -S apps/$PWD @/home/applmgr/frm_runaway.sql $PID1 << EOF
EOF`
echo " ">>/tmp/runaway_forms.log
echo "DB_SESSION ="$DB_SESSION >>/tmp/runaway_forms.log
# if no DB session found for PID
if [ $DB_SESSION -eq 0 ] then
echo " ">>/tmp/runaway_forms.log
echo "Killed Following Runaway Forms Process:">>/tmp/runaway_forms.log
echo "-------------------------------------------------------------------">>/tmp/runaway_forms.log
echo "PID="$PID1", CPU%="$CPU1", Running Time="$TIME1", Program="$PROG1>>/tmp/runaway_forms.log
kill -9 $PID1
#Email the output
mailx -s "Killed: `hostname -a` Runaway Form Processes" [email protected] </tmp/runaway_forms.log
cat /tmp/runaway_forms.log
else
# If DB session exists for PID
if [ ${exprHRS} -gt 120 ]; then
echo $DB_SESSION "of Database sessions exist for this forms process-PID="$PID1". But its running for more than 2 hours. ">>/tmp/runaway_forms.log
echo "Process running time is "$exprHRS" minutes.">>/tmp/runaway_forms.log
echo "Killed Following Runaway Forms Process:">>/tmp/runaway_forms.log
echo "-------------------------------------------------------------------">>/tmp/runaway_forms.log
echo "PID="$PID1", CPU%="$CPU1", Running Time="$TIME1", Program="$PROG1>>/tmp/runaway_forms.log
kill -9 $PID1
#Email the output
mailx -s "`hostname -a`: Runaway Form Processes" [email protected] </tmp/runaway_forms.log
cat /tmp/runaway_forms.log
else
echo "Process running time is "$exprHRS" minutes.">>/tmp/runaway_forms.log
echo $DB_SESSION "of Database sessions exist for PID="$PID1" and is less than 2 hours old. Not killing...">>/tmp/runaway_forms.log
echo "For more details on this PID, run following SQL query;">>/tmp/runaway_forms.log
echo "-----------------------------------------------------------------------">>/tmp/runaway_forms.log
echo "set pages 9999 lines 150">>/tmp/runaway_forms.log
echo "select f.user_form_name, f.user_name, p.spid DB_OS_ID , s.process client_os_id,, s.audsid, f.PROCESS_SPID Forms_SPID,">>/tmp/runaway_forms.log
echo "to_char(s.logon_time,'DD-Mon-YY hh:mi:ss'), s.seconds_in_wait">>/tmp/runaway_forms.log
echo "from v\$session s , v\$process p, FND_FORM_SESSIONS_V f">>/tmp/runaway_forms.log
echo "where S.AUDSID=f.audsid and p.addr=s.paddr and s.process='"$PID1"' order by p.spid;">>/tmp/runaway_forms.log
mailx -s "`hostname -a`: Runaway Form Processes" [email protected] </tmp/runaway_forms.log
cat /tmp/runaway_forms.log
fi
fi
else
#if PID1 and PID2 are not equal or CPU% is less than 95%.
echo "No unique CPU hogging form processes found. Exiting...">>/tmp/runaway_forms.log
cat /tmp/runaway_forms.log
fi
If you have the same problem with some other unix and DB processes, the script can be easily modified and used.
But use this with thorough testing first (by commenting out <kill -9 $PID1> lines.
Good luck.
Edited by: R12_AppsDBA on 19/04/2012 13:10

Thanks for sharing the script!
Hussein

How to kill aprocess

Hi,
could anybody tell me how to kill a process which is runnuing on unix OS.
actually I have an RMI server, and I want to write an applet or some thing simillar to stop this server.
So I need to know it is pid on the server to kill it.
Any body has an idea??

It's not that there's no response, cos I can switch apps and other apps respnd. It's just that a specific app hangs (or loads data or whatever) which takes too long for me to wait for and I'd like to kill it.
So the question is - if the phone is generally responsive but one app in the background needs to be killed, can I somehow do this not rebooting the whole device?
edit: just to add: the back button while hold get's me to the app list and I can switch apps and work with others.

How to kill a process chain in an intermediate step...?

How to kill a process chain in an intermediate step...?
I have tried doing it using SM37... but still the chain is hanging....
Please help ASAP...
Regards
Sneha

Hi Sneha,
If its a loading process then:
1. Go to monitor & make its overall status RED.
2. Go to the target & make the QM status RED.
3. Since its loading data to BW, its R/3 will be active even if you make any status RED in BW.
4. Cancel its corresponding R/3 job. U'll get its R/3 job from monitor>Header tab>Job name. Copy that job name& go to R/3 side>sm37>in Job name add B*followed by the job name copied & then delete the Active job.
Once this is done then your loading process will anyhow stop further stopping the Process chian.
If your job is other than loading, then simply go to that process chain & remove the link between the active process nad the next process after cancelling the active job (as mentioned in the various replies for your question).
Give some time to update the staus of that cancelled job in Db, because even if you cancel any active job, it requires some time to refresh it updated status. Once it is cancelled you can rejoin the link between the proceses and reactivate & schedule your process chain.
hope it'll help

Killing Session : Form vs TOAD

1. How to distingusih between Form Session and Toad Session?
2. How to know if a session is being locked?
My problem is to kill locked session using a scheduler. Tx in advance.

CREATE OR REPLACE PROCEDURE FIFAPPS.fs_p_kill_idle_session
IS
BEGIN
   FOR pr IN (SELECT TO_NUMBER (value) waktu
                FROM fifapps.FS_MST_PARAM a
               WHERE MODULE_ID = 1
                 AND key = 'AUTO_KILL'
                 AND TO_NUMBER (value) > 0)
   LOOP
      FOR ss IN (SELECT SID, serial#,
                        ROUND (seconds_in_wait / 60, 2) minutes_wait, event,
                        machine, program, action, module
                   FROM v$session
                  WHERE service_name <> 'SYS$BACKGROUND'
                    AND event = 'SQL*Net message from client'
                    AND status <> 'KILLED'
                    AND upper(program) NOT LIKE '%TOAD%'
                    AND seconds_in_wait > pr.waktu)
      LOOP
         EXECUTE IMMEDIATE    'alter system kill session '''
                           || ss.SID
                           || ','
                           || ss.serial#
                           || '''';
      END LOOP;
   END LOOP;
END;
/I found the code above.. and some users said that the TOAD session is killed as well...

How to kill Active Data Request in DSO

Hi all,
I have 2 dsos ( A, B). Data loads from A to B.
Now I have deleted data from DSO B by using option delete data ( did killed one running request by turing the status to RED).
when I try to load data again to DSO B, it is not allowing me to execute the DTP.
Message is Request 257.617 is stil processing.
I am SAP BI 7.0 environment.
Please suggest how to kill active request ( I am not seeing it RSMO/SM37).
I tried to use Zombie Request FM, it didnt worked.
Thanks All,
Jason

Srinivas,
Thanks for the reply.
When I go RSRQ
I can see the request , the exception it is showing is CX_RS_FAILED logged.
SM51, when try to kill the process it says
SAP System Message:
Work Process restarted; session terminated
Apologies for earlier post messages saying that I did nt saw the message in RSMO, I can see it is in yellow process.
Please suggest how to kill the processes .
Apperciate your response..
Thank you
Jason

How to clear a form

Hi,
since I've received no answer to my earlier question yet, I try to ask it again.
I have a form to input data. The primary key of the new data record is created from a sequence. If I open the form the first time, everything is right. But if I save the new record and open the form again, the afore entered data are in the input fields and instead of "create" occurs "apply changes". I guess, the form gets the primary key of the saved data record instead of a new primary key from sequence. Where can I have an effect on that?
The application is on the Oracle workspace "GILLETTEDH" and the application is 25515. The form I talk about is on tab "Input Form" (page 2).

Bettina,
I wasnât referring to the processes or branches on the form page. You should keep them just as they were generated by the wizard. The branch I was talking about is the one that takes you to the form page. This is typically a report page or some kind of menu page. If you use the form & report wizard, then youâll get that pre-build. The create button takes you to the form page and resets the form page session state and displays the form in create mode. The report link takes you to the form page while supplying a key to query data and displays the forum page in edit mode. So it depends on how you call the form page.
If you just want to keep adding data though, i.e. create a record, return to page 2 and create another record, then resetting session state for page 2 and branching back to page 2 when clicking on create would be the right thing to do. Try creating a reset session state page process on page 2 and make it conditional on clicking âCreateâ.
Also, when looking at your form, I found that your page process to generate the PK is currently set to âNeverâ. With that setting you wonât be able to create new records. You should make that process conditional on clicking on âCreateâ as well.
You also may want to look into using before-insert triggers for generating the primary key. This would be a cleaner approach to generating this key than having a page process. By using triggers, the primary key would be generated no matter how to records gets inserted, i.e. by using this page, direct insert statement or another client interface.
Hope this helps,
Regards,
Marc

How to call a form from report? in 6i

How to call a Form from Report? In Developer 6i of oracle. Plz tell me tex.

try this
declare
   AppID PLS_INTEGER;
begin
     AppID := DDE.App_Begin('ifrun60 module=myform.fmx userid=scott/tiger@mydb maximize=no', DDE.App_Mode_Maximized);
exception when others then
      srw.message(1,'Errror');
end;Baig
[My Oracle Blog|http://baigsorcl.blogspot.com/]

How to run the form that is only installed on a PC and not using a server?

Hi
I am new to Oracle and have taken the forms class. But I do not understand how to run the form from my PC using XP windows. (Do not have access to a server).
I have started the OC4J, made sure the listener was started, compiled the form and then when I run it, it automatically goes to the HTTP:
ERROR: res://ieframe.dll/acr_depnx_error.htm#,http://kevin:8889/forms/frmservle
I connected to the database correctly. I can process a report and it does nor try to access the internet. My only issue is running the form. I verified it compiled.
Sorry for a basic question. Could someone please help, I tried reviewing other questions, but not sure if they are connecting to a server or not.
I see webutil but is it required if I don't have a server? Thank you in advance.

Regardless of the version, it appears that you may not have configured the Builder. Do the following:
1. Open the Builder
2. From the menu, select Edit > Preferences > Runtime
3. In the box labeled "Application Server URL:", enter a local URL needed to run a form OR click the button labeled "Reset to Default". If you decide to manually enter a value, it would looks something like this:
http://localhost:8889/forms/frmservlet
4. In the field labeled "Web Browser Location:", enter the path and executable to your preferred browser. So for example if IE is your browser of choice the entry would most likely look like this:
C:\Program Files\Internet Explorer\IEXPLORE.EXE
5. Click on OK and retest.
By the way, you can manually enter a URL in the browser. Clicking the RunForm button from the Builder is strictly optional. To run the "test" form directly from the browser enter the following into the browser's address field:
http://localhost:8889/forms/frmservlet?form=test
More information about Forms can be found on OTN:
http://www.oracle.com/technology/products/forms/index.html

How to kill a job in SM37

hi All,
can someone wxplain me how to kill a job in SM37 which is delaed by 10,000 secs.
cheers

Hi Rase,
goto SM37 and click on the active selection and enter the jobname and then click excute the particulr job should appear highlight the jobname then click on the stop iconthat appears on the taskbar( 3 rd from left)
or goto SM50 Click on the process and select process->stop without core
or
set a running infopack of the chain (in RSMO) to red, thats will stop the chain (if there are no parallels, else set all parallels to red).
****Assign Points If Helpful****
Regards,
Ravikanth

How to create one form for two Udo object

Hy ,
I have two Object Udo (header and line)
How we created a form to manage these two files (UDO)
Thanks

Thank you janos
it works, I put the code to other developers for information
     Shared Sub SBO_Application_ItemEvent(ByVal FormUID As String, ByRef pVal As SAPbouiCOM.ItemEvent, ByRef BubbleEvent As Boolean) Handles SBO_application.ItemEvent
            If ((FormUID = "SIR001_") And (pVal.ItemUID = "add") And (pVal.EventType = SAPbouiCOM.BoEventTypes.et_CLICK) And (pVal.Before_Action = False)) Then
                Dim oDS As SAPbouiCOM.DBDataSource
                oDS = SBO_application.Forms.Item(FormUID).DataSources.DBDataSources.Item("@SIR_LOTL")
                oDS.InsertRecord(oDS.Size)
                oDS.Offset = oDS.Size - 1
                oform = SBO_application.Forms.Item(FormUID)
                oMatrix = oform.Items.Item("mtx_0").Specific
                oMatrix.AddRow(1)
            End If
            If ((FormUID = "SIR001_") And (pVal.ItemUID = "del") And (pVal.EventType = SAPbouiCOM.BoEventTypes.et_CLICK) And (pVal.Before_Action = False)) Then
                oform = SBO_application.Forms.Item(FormUID)
                oMatrix = oform.Items.Item("mtx_0").Specific
                For index As Integer = oMatrix.RowCount To 1 Step -1
                    If oMatrix.IsRowSelected(index) = True Then
                        oMatrix.DeleteRow(index)
                        oform.Mode = SAPbouiCOM.BoFormMode.fm_UPDATE_MODE
                    End If
                Next
            End If
        End Sub

How to deploy Oracle Forms & Reports in Weblogic Server 11g (10.3)?

Hi
How to deploy Oracle Forms & Reports in Weblogic Server 11g (10.3)?
Thanks

Hi
when i am going through your bleow link.
I am not able understand the 3.3.1 step :2
http://download.oracle.com/docs/cd/E15523_01/web.1111/e10240/basics.htm#i1010040
edit this file in the Web Configuration,
configuration of an application called "my_application" with a form module called "form=hrapp.fmx":
can deploy only.fmx file ?
if not how to find the realation between my_application and hrapp.fmx ?
Thanks in Adavance
Regards
Ram

How to Refresh System Form in Run Time

Dear All,
Please give me idea for Refresh System Document in Run Time using DI,basically I am using system columns for update for some scenarios.
So please give solution that how should refresh system form.
Thanks a lot.
Ashish Singh.

Hi,
Please post above discussion in SDK forum.
Thanks & Regards,
Nagarajan

How to kill Hang form ....?

Similar Messages

Maybe you are looking for