How to know if a cell is enabled to edit

Hello
How I can know if a specific cell in a matrix is enabled, to avoid errors when I try to update the content.
I have tried with "Editable" property but when the column is disabled, returns Editable = True
If oMatrix.RowCount > 0 Then
   Dim wrow As Integer
   For wrow = 1 To oMatrix.VisualRowCount
   If Not oMatrix.Columns("1").Editable Then Exit Sub
   Set oEditText = oMatrix.Columns("1").Cells.Item(wrow).Specific
Thanks in advance.
Blas Gonzalez

Hi Frank,
I have a similar problem... I added some user fields in the deliveries form and I want to write some values in them even they're invisible(I don't want extra columns to be accessible to the user). When I try to hide them by code ( Columns("U_xxx").Visible = false, Columns("U_xxx").Enabled = true) the values are simply not written. If I left them visible, the code works fine.
I worked around this setting the columns width to 1
Is this by design ?
Thanks

Similar Messages

How to paint a Custom Cell while you are editing on adjacent Cell in JTabl

Hi All,
I have two Columns in my Custom Table . Both Two Columns are Custom Cell Editors/Renderers.
I have made UI such that Column1 is Label , Column 2 is TextBox / Combo/ UI Input any
My Custom Table View when i edit some value against Max Conn. it should display Blue
=================================
Column A | Column B
==================================
Timeout | some_unchanged_value
*{color:#0000ff}Session{color}* | some_unchanged_value
Log File | some_unchanged_value
===================================
My issue is when i start typing in my Custom Editor suppose i Type /invoke Edtir of Index 2, Column 2 font should become Blue.
It becomes blue only when i debug this issue it perfectly works, without Debugger it doesnt changes the Font
MyDefaultRenderer is my Custom renderer - I have set Foregroud Color as BLUE
NOTE:_
In run method if table.repaint() instead of single renderer:
It turns Blue when i make call on table.repaint() methosd but i feel that repainting full table on every key Stroke should not be very good programming. Whats is more appropriate way?
I want to repaint only that particular cell against which i change the Value
    private class MyDefaultEditor extends AbstractCellEditor implements TableCellEditor {
        private JTextField txtField = null;
        private int rowIndex;
        public MyDefaultEditor() {
            txtField = new JTextField();
            txtField.addKeyListener(new KeyAdapter() {
                @Override
                public void keyTyped(KeyEvent e) {
                    super.keyTyped(e);
                    System.out.println("########### Hello This is MyDefaultEditor");
              SwingUtilities.invokeLater(new Runnable() {
                        public void run() {
                              // Call Renderer adjacentt to input to turn Blue (Is this Valid Code ??)
                            MyDefaultRenderer defRen = (MyDefaultRenderer) thisTable.getCellRenderer(activeRowIndex, 0);
                            defRen.paintMe();
          // table.repaint() works for me but i dont want to call it on evey ket type, that will be Heave rite???
        public Component getTableCellEditorComponent(JTable table,
                Object value, boolean isSelected, int row, int column) {
            rowIndex = row;
            String valStr = "";
            if (value != null && value instanceof String) {
                valStr = value.toString();
            txtField.repaint();
            return txtField;
        public Object getCellEditorValue() {
            return txtField.getText();
    }Edited by: Shubhadeep on Jun 27, 2009 1:58 AM
Edited by: Shubhadeep on Jun 27, 2009 2:01 AM
Edited by: Shubhadeep on Jun 27, 2009 2:06 AM
Edited by: Shubhadeep on Jun 27, 2009 2:12 AM

Well, I think you need to add a custom renderer to the first column. The renderer would check if the table.isEditing(). If it is and the editing is done on the same row, then you set the font color blue, otherwise you use the default font color.
Then the next question is how do you repaint the cell. Well you can use the table.repaint(Rectangle) method. You can get the Rectangle to repaint by using the table.getCellRect(...) method.
Finally, you need to know when to repaint the cell. Well a PropertyChangeEvent is fired when a cell starts and stops editing. So you only need to handle these events. Don't use a KeyListener. The PropertyChangeListener you add to the table might be something like:
public void propertyChange(PropertyChangeEvent e)
     if ("tableCellEditor".equals(e.getPropertyName()))
          if (table.isEditing())
               processEditingStarted();
          else
               processEditingStopped();
}So when editing is started you need to determine the "adjacent" cell you want to repaint to the blue font is used. You would save the cell Rectangle so you can restore the font when editing is stopped.

JTable how to know when a cell is updated?

I have a Tabel with a custom tablemodel (based on AbstactTableModel). I need to do something when a user changes the value of a cell. Can anyone give me an example?

Hi,
It is really simple - all you have to do is to implement the TableModelListener interface - one method - in that class, where you want to handle the changes, and add this class as TableModelListener to your table model - that is all. See TableModelListener interface, TableModelEvent and the method addTableModelListener(TableModelListener) of AbstractTableModel in the documentation.
greetings Marsian

In Generic Extraction how can we know whether it is Delta Enabled or not?

In Generic Extraction how can we know whether it is Delta Enabled or not?
Thanks,
Pramod.

Hi Pramod,
In R/3 use RSO2 tcode and enter your DS name and click "Change / Display" In this "Press F7 or Display Filed List" icon near to Generic Delta.In this Screen if Delta Update is Checked means it supports delta method otherwise it won't support delta method.
Note:Assign Points if it helps.
-Arun.M.D

I recently reset Firefox. I looked at my list of Add-ons and it shows an extensive list. How do I know if I want them Enabled?ems that are enabled.

I reset firefox for another problem. After doing so I went and looked at my addon's and found an extensive list. I do not know if they should remain enabled or should be disabled- nor do I have the knowledge to do so. How do I address this?

I am talking about plugins. When I click on this item it says the status of the plug-ins is unknown and then a another item on each line says research!

How i can know that document splitting is enable or not ?

Hi experts,
how i can check that document splitting enabled or not ? Is it necessary that only new g/l activated system can enable such features ?
regards,
Sanju M S

Hi,
Check this path : Financial Accounting (New) -- General Ledger Accounting New -- Business Transactions -- Document Splitting -- Activate Document Splitting
Hear you need to check whether Document Splitting is activated or not ... if it is activated select "Deactivate per compnay code" check if your company code is activated or not.
This is a special feature in New GL ... this feature can be activated only in New GL system (From ECC 5 onwords)
Regards

How do i know if the internet is enabled?

Hi
Box arrived but don't know if the internet is enabled yet. One email says don't plug in hub until I'm emailed to say it's ready, other (phone call) said it would be ready today.
Is there any way of finding out if it's been switched on yet?

try connecting if today is your activation day however it can be activated any time up to midnight tonight
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

How to know by looking a box that iphone 6 is facetime enabled or not? while purchasing.

i want to purchase a new iphone 6. but i want to know that iphone is facetime enable or not. is there anything mentioned on the box.

Hi, mustufa5185.
Thank you for visiting Apple Support Communities.
Here are the system and hardware requirments for FaceTime for iOS. Please note that FaceTime is not available in all regions.
Which Apple products support FaceTime video and FaceTime audio?
To use FaceTime, you need one of the following Apple products:
iPhone 4 or later
iPad 2 or later
iPad mini
iPod touch (4th generation) or later
FaceTime audio calling isn't available with iPod touch (4th generation).
*FaceTime over cellular data isn't available on iPhone 4 or iPad 2.
iOS: Using FaceTime
http://support.apple.com/en-us/HT4319
Cheers,
Jason H.

How do I locate another cell phone with my iphone?

how do I locate another cell phone with my iphone?

you can't unless it's an AirPrint enabled printer or you purchase a 3rd party app like printopia.

How to get the Last cell in HSSFCell (Excel sheet)

Hello
I am trying to convert an excel sheet to a tab limited file.
I am using HSSF and unable to track how do i know if the cell encountered is a last filled cell in excel sheet
Some of the cells in the sheet can be blank. In that case i am just using inputting a '\t' for that cell and read the next one. But coz of this when i get the last cell, a tab is included for that too.
Can someone let me know how can i rectify this?
it seems like HSSFCell does not have any methos like lastCell or so
Thanx

then use getLastCellNum() in org.apache.poi.hssf.usermodel.HSSFRow

How to use a radio button in enabling/disabling a text box in report progra

Hi,
    Could any please let me know, how to use a radio button in enabling/disabling a text box in report program.

*& Report ZMR_RADIO_BUTTONS
REPORT ZMR_RADIO_BUTTONS.
PARAMETERS : R1 RADIOBUTTON GROUP G1,
             R2 RADIOBUTTON GROUP G1.
PARAMETERS : A1 TYPE I,
             A2 TYPE I.
AT SELECTION-SCREEN OUTPUT.
*initialization.
IF R1 = 'X'.
LOOP AT SCREEN.
IF SCREEN-NAME = 'A1'.
   SCREEN-INPUT = 0.
    SCREEN-ACTIVE = 0.
ENDIF.
IF SCREEN-NAME = 'A2'.
   SCREEN-INPUT = 0.
    SCREEN-ACTIVE = 1.
ENDIF.
ENDLOOP.
ENDIF.
IF R2 = 'X'.
LOOP AT SCREEN.
IF SCREEN-NAME = 'A1'.
   SCREEN-INPUT = 0.
    SCREEN-ACTIVE = 1.
ENDIF.
IF SCREEN-NAME = 'A2'.
   SCREEN-INPUT = 0.
    SCREEN-ACTIVE = 0.
ENDIF.
modify screen.
ENDLOOP.
ENDIF.
START-OF-SELECTION.
*IF R1 = 'X'.
*LOOP AT SCREEN.
IF SCREEN-NAME = 'A1'.
   SCREEN-INPUT = 0.
   SCREEN-ACTIVE = 1.
ENDIF.
*ENDLOOP.
*ENDIF.
*IF R2 = 'X'.
*LOOP AT SCREEN.
IF SCREEN-NAME = 'A2'.
   SCREEN-INPUT = 0.
   SCREEN-ACTIVE = 0.
ENDIF.
*ENDLOOP.
*ENDIF.

How to get the selected cell in a Matrix.

Hi all,
Does any one know how to get the selected cell in a Matrix. Please help to answer. Thanks in advance.
Regards,
Thanh Tran

Hi,
You can get the value of every cell using UI API but using datasources is a better aproach.
Using UI API you need to know the event you want to catch. Example: Catching click event in itemcode column and getting the value (C#):Ki
      if ((pVal.EventType == BoEventTypes.et_CLICK) && //CLICK EVENT
          (pVal.ItemUID == "38") &&                                       //MATRIX-> ITEM 38
          (pVal.ColUID == "1") &&                                           //ITEMCODE COLUMN
          (!pVal.InnerEvent) &&
          (!pVal.BeforeAction))
                Form form = null;
                try
                    form = kernel.Application.Forms.Item(pVal.FormUID);
                    form.Freeze(true);
                    Matrix mtx = (form.Items.Item(pVal.ItemUID).Specific as Matrix); //MATRIX OBJECT
                    string itemCode = (mtx.Columns.Item("1").Cells.Item(pVal.Row).Specific as EditText).Value.Trim(); //itemcode = VALUE OF CELL. COLUMN "1": ITEMCODE COLUMN. CURRENT ROW: pVal.Row
                catch (Exception ex)
                    kernel.Application.MessageBox("Error " + ex.Message, 0, "", "", "");
                finally
                     if (form != null)
                        form.Freeze(false);
Kind regards,
Nauzet Díaz

How to know whether any item value got changed

How to know in Apex whether any form item got changed. That will help me to know when the user will be pressing the "Apply Changes" button and I will popuplate the "User Modifed" and "Date Modifed" column values in the table. For now, I dont want to write database triggers, but to implement it at application level.

Hi Deb
For a really good explanation of the naming /numbering of tabular form items see Patrick Wolf's blog on the matter.
http://www.inside-oracle-apex.com/which-tabular-form-column-is-mapped-to-which-apex_applicationg_fxx-array/
He also gives a simple example of using check-boxes in tabular forms here
http://www.inside-oracle-apex.com/checkboxes-in-tabular-forms-the-easy-way/
You will notice in his example, that the apex_application.g_f40 is specifically named as 40 - a high number assuming that you don't have more than 39 editable columns in you tabular form - shown in the name="f40" code.
<input type="checkbox" #ADMIN_USER_CHECKBOX# value="#ROWNUM#" name="f40" id="f40_#ROWNUM#"/>#ADMIN_USER_CHECKBOX#
In essence the columns are numbered (only the editable ones) in the order in which they appear in the select statement - so the first editable column will be f(01), next f(02) etc - except where the column is specifically named - in this case f(40).
I had a situation where I wanted to programatically stamp the user's name into a column depending on whether the user checked a check-box in each row.
But if the column is editable and visible, then the user is free to type into this cell - this I wanted to avoid.
Something that took me a while to work out is that you can hide an editable column - so it can updated by your procedure code - not by the user!
The way to solve this is to have the sql statement select the relevant column twice - the first one is the editable one and hidden, and the second copy is a normal report column - displayed but not editable.
I used Patrick's example in the link above to set up my tabular form with the first column as a check-box.
The user then marks the desired rows by clicking in the check-box and submits / saves.
The procedure then detects which rows have been checked - updates the editable (but hidden) database column, and then re-displays the result - with the second copy of the same column now showing the updated value!
I hope this helps.
Look at Patrick's other postings - they are so helpful.
Mike

How to know deployment contents

My weblogic domain has some adf applications created by other people. I have not the source code. Some applications may conflict. How to know the deployment contents of these adf applications and extensions (such as soa, webcenter) of domain?

You can take a look into deployment descriptors such as web.xml, weblogic.xml, application.xml, weblogic-application.xml, jazn-data.xml, and other files related to ADF applications.
If your domain has been enabled with SOA Suite 11g or WebCenter Suite then you can look at for composite.xml, .bpel, and other deployment descriptors related to J2EE and SOA applications.

How to know last access date for the schema's

Dear all,
could u plz tell me How to know last access date for the schema’s
Regards,
Srinivasa rao.P

Srinivas,
could u plz tell me How to know last access date for the schema’s
In Oracle, we don't access schemas but schema objects.And this informationis not kept anywhere persistantly.As Amit also mentioned,if you do need it,you have to enable Auditing.
Aman....

How to know if a cell is enabled to edit

Similar Messages

Maybe you are looking for