How to know if a field is input or display when doing a BDC

HI everybody
Im performing a BDC on transaction, theres a field, which is somtimes inputtable and sometimes display.
If its inputtable, I shd insert a value in it.
Now, how do i know if its inputtable or display?
regards
anjali

Hi sia,
1. Unfortunately, from inside the bdc program,
   we cannot detect,
   whether the field on screen,
   is in input mode or display mode.
regards,
amit m.

Similar Messages

HT2486 How do I add spouse field to all contacts to avoid doing it one by one?

How do I add spouse field to all contacts to avoid doing it one by one?

In Contacts>Preferences>Template>Related Names>Spouse:
Add it to the card and it will appear in all cards.
In Lion you will be looking for Address Book rather than Contacts.

How to roll up Amount field upto Input Criteria Posting period

Hi All,
I have a requirement to create a FI Budget report where the User will give the Posting Period as the input criteria, and based on the entered Posting period, 2 amount fields, "Original Budget" & "Current Month" need to get derived by looking at another amount field called actual, by rolling up the Amounts up to the entered Posting period.
For example, the user gives input as Posting period = 06, which is December because Fiscal year starts from July here. And my Cube has an amount field "Actual" which displays amount for each posting period. Therefore when posting period = 06, then the "Actual" amount value for months July (PP = 01) through December (PP = 06) should be rolled up i.e added and displayed in the "Original Budget field". The Current month should only display the amount for the input criteria month.
How can I do that, any suggestions please?
Thanks!!

Hi Sam,
Is there any way i could do it without the SAP Exit? If yes, how? If no, can u specify in the document you sent, which code i could use as reference for my requirement?
Thanks

In standard programmes how to know where the fields are in the code...Urge.

How to find where the coding of the fields displayed in the standard transactions is written.FOr example In XD0l if I want to find out where the 'key term' is coded in the stadard programe of the transaction XD01.When I go into sytem--->status,I will get to see a window showing the details,In that we can see 3 PRAGRAMS-PROGRAM(SCREEN),PROGRAM(SUB SCREEN) AND PROGRAM (GUI).Can nay one explain the significance of these 3 programs.

Hi Henry,
I don't think this is the easiest way to look at the code around a particular field on the screen. Debugging standard programs also can be very tedious, if not impossbile. So, instead of this question, I would like to find out exactly what you want to do if you know the code.
If you are in a transaction and you want to know where the code of a particular field is, the fastest way to get to it is by pressing the F1 key on the field and then press the Technical info button on the help screen. In here you will typically see the same kind of information but it is very specific to the field you selected.
PROGRAM(SCREEN) tells you which program is manipulating the main screen, in which your field is embedded. Remember your field may be included in a sub-screen and that subscreen may be the one included in the main screen.
PROGRAM(SUB SCREEN) tells you which program is directly responsible for the field on the subscreen it is included in. This is where you should find the code most appropriate for the field, but not necessarily.
PROGRAM(GUI) controls how your push buttons and the menu options in the screen behave and controlled.
Srinivas

How to know querry level fields from which tables in the source system

Hi Experts,
let's say we've two fields in the querry e.g: Actual GI Quantity, Actual Value of GI
This fields from PP Querris level how would i know from which table we're getting data is there any easy process to find out please drop your suggestions..
Next doubt is when generate querry e.g. PM Module we don't know exatly what're the available tables & fields technical names but in my currently project using SAP Delivered Infocubes & Querries at the moment & generating querries but when we test in the Portal it's shows some fields '0', X. I've to check in source system weather it's having any values or not.
Can anybody drops your valuable words
Cheers
Suresh

Hi all,
I'm a colleague of Maarten, and I think maybe we didn't explain well enough what we want. So let me try to elaborate:
We want to obtain the reference (within the SOAP-Body of the XI-message) to the attachment which contains the main payload (at least, in XI itself). This reference seems to have gone missing, once our adapter module (after having gone through XI) is entered (and, by the way, before we enter the SOAP-receiver-adapter).
The JAVA-representation of the XI-message seems to hide the fact that in XI itself, the main payload is an attachment, referenced from within the SOAP-Body.
Nevertheless, we would like to obtain/retain(?) that reference, in order to put it in our own to-be-created-additional-attachment, which would go (via the PayloadSwapBean-module of SAP) into the SOAP-body of the final SOAP-call, and should then reference the 'new attachment' (which was (in XI itself) the main payload).
So, I think both answers (up to now) don't help us much (however: thanks for your reaction anyway of course).
So, maybe someone has another idea?
Regards, Fred

How to delte empty segments/fields from input XML graphical mapping

Hi
I would like to delete segments which don have any values in their child segments in graphocal mapping?
How should i use createif and existsmapping functions for this?
Edited by: Rajesh on Jun 15, 2009 8:42 PM

I would like to delete segments which don have any values in their child segments in graphocal mapping?
How should i use createif and existsmapping functions for this?
If you want to check if a value if present in a particular node or not then I dont think exists function will help you....exists function will only check if the node is existing or not.....
<SRC>
<Node1>
<Field1>SAP</Field1>
</Node1>
<Node2>
<Field2></<Field2>
</Node2>
</SRC>
If above is your structure on which you want to implement the logic..then as per your req you dont need to have the Node2 as the field(s) within it is not having any value....then you need to implement the below logic:
Field
----------> equalS ----> Not ---> If...then / createIf ----> Target
Constant(keep it blank)
Regards,
Abhishek.

How to know received quantity field names in MM

HI
I know that purchase order quantity can be found from EKPO-MENGE. Is there a field name for PO quantity received in time and PO received late.
Received late is when the goods is received after the planned delivery date.
thanks

Hi,
I resolved it by extracting the data from PO history table (EKBE).
In 2LIS_02_SCL extractor, I wrote a used exit that extracted PO quantity from EKBE table and compare the delivery date from table EKET.
Do let me know if you need additional information.
thanks

How to know whether a field exit is getting triggered or not??

HI ,
We are upgrading a system from 4.6 to ECC, the problem is that, in earlier system field exit was getting triggered but its not getting triggered in ECC, the field exit is active in ECC but still its not getting triggered.
Field Exit is FIELD_EXIT_SAKNR.
Please provide some help
Regards
Karan Arya

Hi,
As part of the extension concept, SAP allows you to install a field exit for each screen field. Similar to the conversion exit, the system branches at the field exit at DCI (DATA COMMUNICATIONS INPUT) to a function module, if the field is an input field and a function code was triggered. The function module must adhere to the following naming convention:
Prefix: FIELD_EXIT_
Infix: <Data element name>
Suffix: _0 to _9 (optional), _A to _Z
The interface is automatically generated during the creation of the function module, and has 2 parameters:
Import parameter: INPUT
Export parameter: OUTPUT
After a function code has been triggered the contents of the field are made available to the FB via the "INPUT" import parameter. You can edit this and, when changed, make it available to the ABAP/4 processor in "OUTPUT". The input field contents are usually passed on: you can simply write OUTPUT = INPUT.
If, e.g., you have activated the field exit for the data element 'PROGRAM', then the fields of all the screens, which refer to the data element 'PROGRAM', branch to the function module FIELD_EXIT_PROGRAM. This includes the field 'Program' of the initial screen SAPMS38M0100 in transaction SE38, for example.
If you do not want the function module to be accessed from all screens, assign particular screens to the data element PROGRAM. By allocating an exit number, it is also possible to branch to other function modules with the corresponding suffix _0 ... _Z.
Example: You have assigned screen SAPMS38M0100 and exit number 5 to data element 'PROGRAM'. The corresponding field on SAPMS38M0100 branches to FIELD_EXIT_PROGRAMM_5.
As soon as you activate an exit, the corresponding screens are invalidated.
Note: Field exits are only taken into account during screen generation if the parameter abap/fieldexit = 'YES' is set in the system profile.
Requirement
Set the profile parameter abap/fieldexit = 'YES' before system start.
Limitations
The following ABAP statements are not allowed in the function modules of field exits:
BREAK-POINT,
CALL SCREEN, CALL DIALOG, CALL TRANSACTION, SUBMIT,
COMMIT WORK, ROLLBACK WORK,
COMMUNICATION RECEIVE,
EXIT FROM STEP-LOOP,
MESSAGE I, MESSAGE W.
Note:
Field exits cannot be edited with the debugger.
You should not use any external Performs in field exits. The ABAP processor shares the table work areas of externally called programs with those of the first caller. This could lead to errors at field exits that can hardly be analyzed, as field exits are sometimes slipped into the flow of the program at unforeseen events.
Hope this helps you resolve your issue.
Regards,
Jayanth

How to know the table field for RMCLM- ANZRE

Hi experts,
I need to know table for structure field RMCLM - ANZRE.
In CL02, it indicates 'display relavent' for character.
Thanks in advance.
zak.

CABN-ATVIE. (look at OSS [Note 488831 - Relevance fields are missing|https://service.sap.com/sap/support/notes/488831] found by keyword ANZRE, in the correction you will find the "move")
Regards

How to know if a field is a number ?

hi,
exists (and where) a function "isAnumber" of something like that ?
I have just found a "isLetter", and I dont want to test if every key is 1 or 2 or 3....
thanks !

I use this now because I didn't like having to catch an exception to see if a string was a number:     /**
      * Check whether a <code>String</code> is actually a number. This should replace:
      * <pre>
      *   try {
      *     Double.parseDouble(s);
      *   catch(NumberFormatException nfe) {}
      * </pre>
      * @param num the <code>String</code> to check
      * @return whether the <code>String</code> is a number
     public static boolean isNumber(String num) {
          try {
               char DECIMAL_SEPARATOR = '.';//ResourceBundle.getBundle("java.text.resources.LocaleElements", Locale.getDefault()).getStringArray("NumberElements")[0].charAt(0);
               String lowNum = num.toLowerCase();
               int numPts = 0;
               // check for preceeding + or -
               if(lowNum.charAt(0) == '+' || lowNum.charAt(0) == '-') {
                    lowNum = lowNum.substring(1);
               // check for trailing d, f, or l
               if(lowNum.charAt(lowNum.length()-1) == 'd'
                         || lowNum.charAt(lowNum.length()-1) == 'f'
                         || lowNum.charAt(lowNum.length()-1) == 'l') {
                    lowNum = lowNum.substring(0, lowNum.length()-1);
               // check for 'E'
               if(lowNum.indexOf('e') > 0) {
                    StringTokenizer st = new StringTokenizer(lowNum.toString(), "e", false);
                    if(st.countTokens() != 2)
                         return false;
                    return isNumber(st.nextToken()) && isNumber(st.nextToken());
               char[] ca = lowNum.toString().toCharArray();
               for(int i = 0; i < ca.length; i++) {
                    if(ca[i] == DECIMAL_SEPARATOR) {
                         // longs shouldn't have a decimal point and there should never be more than one decimal point
                         if(lowNum.charAt(lowNum.length()-1) == 'l' || ++numPts > 1) {
                              return false;
                    else if(ca[i] < '0' || ca[i] > '9') {
                         return false;
               return true;
          catch(Exception e) { return false; }
     }m

How to add an extra field in the alv display(Scope of List:ALV) for me55.

Hello..
I've to display 2 fields- (wbs element description) and (network description) along with the standard ALV display, for the Account Assignment type 'Q' and 'N' of all purchase requisitions being displayed.
I was suggested to modify the standard program RM06BF00.
Can you please let me know where and how should I modify the program RM06BF00. Is there any userexit or badi to add my fields??
Thanks in advance.
With Regards,
Him

Hello,
If we create a Z report for this program, can anyone please tell me where can I find the function "REUSE_ALV_GRID_DISPLAY" in the given program so that I can add my fields along with the default filelds displayed...
Thanks
~Him

[AS][INDCC] How to set Color Conversion field to No Color Conversion when creating PDF Export preset

How can i set Color Conversion field in Export to PDF dialog to No Color Conversion when creating PDF Export preset? i have done a bit of searching and have found where it has been recommended to set effective pdf destination profile to use no profile but it doesn't seem to be producting the expected results.

Yes, it seems that i had to make the change after creation, not while creating the preset. thank you.
tell application "Adobe InDesign CC"
     set newPreset to make new PDF export preset with properties ¬
          {name:"preset name", standards compliance:none, acrobat compatibility:acrobat 7}
     tell newPreset to set PDF color space to unchanged color space
end tell

How to make a text field required at run time when the user clicks the checkbox ?

I got a form where , there are several checkboxes and text fields associated with that checkboxes.If the use clicks on the check box then the associated
text fields should become required.I have tried the change event and the click event for the checkboxes.It gives error in the onChnage event and I got some weird results in the on click event .Sometimes if the user click the check box , then for the 1st time the field doesnt become required , then the user onclicks the check box and when the user clicks the checkbox for the second time the field becomes required,but if i deselects the highlighted field option and selects it again the field becomes required even if the user onchecks it I am totally confused !!! Adding to it i have also written the wrong code still i achieved the desired result ?? How it can be possible . I am writing the codes below , please help me as i am working under a deadline from the client.
onChange event :
var newVal = this.boundItem(xfa.event.newText);
if(newVal == 0)
    xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row4.Purchasecost3_1" ).validate.nullTest = "disabled";
else
     xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row4.Purchasecost3_1" ).validate.nullTest = "error";
For the onClick event :
var a = xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row2.CostItemRecovere d_OnlyEnergyCharges").rawValue;
//app.alert(a);
if(a == 0)
    xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row4.ComplianceCheck_ L1_1").validate.nullTest = "error";
if(a == 1)
      xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row4.ComplianceCheck_ L1_1").validate.nullTest = "disabled";
   Please help someone !!!

I used the onchange event and wrote the code for it. I got the result . But there is a problem.All these fields are in a table and it's a dynamic table where you can add rows dynamically at the run time .I have other change event for some fields in this table .All are working fine when i add the row.But for this check box the required fields are not validated as required at the run time . I am here giving the code , Please help me .
form1.Subform0.Subform1.Subform9.Subform10.Table48.Row2.CostItemRecovered_OnlyEnergyCharge s::change - (JavaScript, client)
if(this.rawValue == "1")
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row4.ComplianceCheck_ L1_1").mandatory= "error";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row4.ComplianceCheck_ L2_1").mandatory= "error";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row5.ComplianceCheck_ L1_2").mandatory= "error";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row5.ComplianceCheck_ L2_2").mandatory= "error";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row6.ComplianceCheck_ L1_3").mandatory= "error";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row6.ComplianceCheck_ L2_3").mandatory= "error";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row7.ComplianceCheck_ L1_4").mandatory= "error";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row7.ComplianceCheck_ L2_4").mandatory= "error";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row8.ComplianceCheck_ L1_5").mandatory= "error";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row8.ComplianceCheck_ L2_5").mandatory= "error";
else
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row4.ComplianceCheck_ L1_1").mandator = "disabled";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row4.ComplianceCheck_ L2_1").mandatory = "disabled";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row5.ComplianceCheck_ L1_2").mandatory = "disabled";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row5.ComplianceCheck_ L2_2").mandatory = "disabled";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row6.ComplianceCheck_ L1_3").mandatory = "disabled";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row6.ComplianceCheck_ L2_3").mandatory = "disabled";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row7.ComplianceCheck_ L1_4").mandatory = "disabled";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row7.ComplianceCheck_ L2_4").mandatory = "disabled";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row8.ComplianceCheck_ L1_5").mandatory = "disabled";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row8.ComplianceCheck_ L2_5").mandatory = "disabled";

How to merge the 2 field in alv gride display

Tables for ALV display
DATA: it_fieldcat   TYPE slis_t_fieldcat_alv,
      wa_fieldcat   TYPE slis_fieldcat_alv,
      wa_layout     TYPE slis_layout_alv,
      it_exclude    TYPE slis_t_extab,
      wa_exclude    TYPE slis_extab,
      it_header TYPE STANDARD TABLE OF zqm_imir_hdr,
      wa_header LIKE LINE OF it_header,
      it_final TYPE STANDARD TABLE OF zqm_imir_itm,
      wa_final LIKE LINE OF it_final,
      it_vcode      TYPE RANGE OF zqm_wtr_itm-vcode,
       wa_vcode      LIKE LINE OF it_vcode.
DEFINE m_fieldcat.
wa_fieldcat-fieldname = &1.
wa_fieldcat-tabname   = &2.
wa_fieldcat-seltext_m = &3.
wa_fieldcat-outputlen = &4.
wa_fieldcat-col_pos   = &5.
append wa_fieldcat to it_fieldcat.
clear wa_fieldcat.
END-OF-DEFINITION.
DEFINE m_vcode.
wa_vcode-option   = &1.
wa_vcode-sign     = &2.
wa_vcode-low      = &3.
wa_vcode-high     = ''.
append wa_vcode to it_vcode.
clear wa_vcode.
END-OF-DEFINITION.
START-OF-SELECTION.
PERFORM data_retrival.
PERFORM lead_time_calculation.
IF it_final[] IS NOT INITIAL.
    PERFORM alv_display.
ENDIF.
Display ALV
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      i_callback_program = sy-repid
      is_layout          = wa_layout
      it_fieldcat        = it_fieldcat
      i_save             = c_x
      it_excluding       = it_exclude
    TABLES
      t_outtab           = IT_OUTPUT[]
    EXCEPTIONS
      program_error      = 1
      OTHERS             = 2.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
m_fieldcat: 'ZIMIRNO' 'IT_OUTPUT' text-003 21 0,
              'PRUEFLOS' 'IT_OUTPUT' text-004 21 1,
              'ZCRDAT'    'IT_OUTPUT' text-030 9 2,
              'INITS'     'IT_OUTPUT' text-031 6 3,
              'SPLIT'     'IT_OUTPUT' text-005 12 4,
              'WERK'     'IT_OUTPUT' text-006 5 5,
              'LOSMENGE' 'IT_OUTPUT' text-007 24 6,
              'MENGENEINH' 'IT_OUTPUT' text-008 15 7,
              'NAMEVEND'   'IT_OUTPUT' text-009 11 8,
*& Hypercare - 721600 - IMIR Changes - Start
             'KONT_PSPNR' 'IT_OUTPUT' text-023 15 7,
              'POSID' 'IT_OUTPUT' text-023 15 9,
*& Hypercare - 721600 - IMIR Changes - End
              'LTEX1' 'IT_OUTPUT' text-024 24 10,
              'EBELN'    'IT_OUTPUT' text-010 26 11,
              'MBLNR'    'IT_OUTPUT' text-011 24 12,
              'ANZGEB'   'IT_OUTPUT' text-012 17 13,
              'GEBEH'    'IT_OUTPUT' text-013 4 14,
              'MATNR'    'IT_OUTPUT' text-014 18 15,
              'TXZ01'   'IT_OUTPUT' text-015 128 16,
              'SPECE'    'IT_OUTPUT' text-016 23 17,
              'VCODE'   'IT_OUTPUT' text-017 24 18,
              'TAGNO'   'IT_OUTPUT' text-018 10 19,
              'HEATNO'   'IT_OUTPUT' text-019 11 20,
              'IDCODE'   'IT_OUTPUT' text-020 7 21,
              'TCNO'   'IT_OUTPUT' text-021 9 22,
              'REMARKS'   'IT_OUTPUT' text-022 30 23,
              'BUDAT'   'IT_OUTPUT' text-025 30 24,
              'CPUTM'   'IT_OUTPUT' text-026 30 25,
              'VDATUM'   'IT_OUTPUT' text-027 30 26,
              'VEZEITERF'   'IT_OUTPUT' text-028 30 27,
             'ZLTIME'    'IT_OUTPUT' text-029 30 26,
              'LEADTIME'   'IT_OUTPUT' text-029 30 28.
DATA : v_unit like T006-MSEHI VALUE 'HR',
       v_FCALID like SCAL-FCALID,
       v_zltim TYPE f,
       v_zltime TYPE p LENGTH 8 DECIMALS 2.
SELECT SINGLE FABKL INTO v_FCALID FROM T001W WHERE WERKS = s_werks.
SELECT zcrdat INTO TABLE it_zqm_imir_hdr
       from zqm_imir_hdr
        FOR ALL ENTRIES IN it_final
        where zcrdat EQ it_final-zcrdat.
SELECT mblnr mjahr budat cputm
      INTO TABLE it_mkpf
      from mkpf
        FOR ALL ENTRIES IN it_final
      where mblnr EQ it_final-mblnr
        AND mjahr EQ it_final-mjahr.
SELECT prueflos vdatum vezeiterf
      INTO TABLE it_qave
      from qave
        FOR ALL ENTRIES IN it_final
      where prueflos EQ it_final-prueflos.
SORT it_mkpf    BY mblnr mjahr.
SORT it_qave    by prueflos.
SORT it_zqm_imir_hdr BY zcrdat.
    LOOP AT it_final into wa_final.
      CLEAR: wa_output,wa_mkpf,wa_qave,wa_zqm_imir_hdr.
      MOVE-CORRESPONDING wa_final to wa_output.
READ TABLE it_zqm_imir_hdr INTO wa_zqm_imir_hdr WITH KEY zcrdat = wa_final-zcrdat
                                               BINARY SEARCH.
      READ TABLE it_mkpf INTO wa_mkpf WITH KEY mblnr = wa_final-mblnr
                                               mjahr = wa_final-mjahr
                                               BINARY SEARCH.
      MOVE wa_zqm_imir_hdr-zcrdat TO wa_output-zcrdat.
      MOVE wa_mkpf-budat TO wa_output-budat.
      MOVE wa_mkpf-cputm TO wa_output-cputm.
      READ TABLE it_qave INTO wa_qave WITH KEY prueflos = wa_final-PRUEFLOS
                                               BINARY SEARCH.
      MOVE wa_qave-vdatum     TO wa_output-vdatum.
      MOVE wa_qave-vezeiterf TO wa_output-vezeiterf.
LV_START_DATE = wa_zqm_imir_hdr-zcrdat.
LV_START_DATE = wa_mkpf-budat.
LV_START_TIME = wa_mkpf-cputm.
LV_END_TIME   = wa_qave-vezeiterf.
LV_END_DATE   = wa_qave-vdatum.
IF LV_START_DATE IS NOT INITIAL.
   IF LV_END_DATE IS NOT INITIAL.
      CALL FUNCTION 'SD_CALC_DURATION_FROM_DATETIME'
        EXPORTING
          i_date1                = LV_START_DATE
          i_time1                = LV_START_TIME
          i_date2                = LV_END_DATE
          i_time2                = LV_END_TIME
       IMPORTING
         E_TDIFF                = LV_DIFF
        E_DATE2_EARLY          = E_DATE2_EARLY
      EXCEPTIONS
        INVALID_DATETIME       = 1
        OTHERS                 = 2
      IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
eNDFORM.}
This is my code unable to merge the to tabs position is on 3rd and 4th.
need help ......
thanks,

Hi,
From Your code I saw that you called Macro of fieldcat after Calling the ALV Function Did You Check That One.
Following links may be useful for you ,
ALV report: How to merge 2 columns into 1 column?
Hope this information helps You
Regards,
Raghava Channooru

How to make a 3 fields search box and display results below it

Hello there I am trying to make a module for joomla cms that facilates visitor to find a particular list of packages for the search he makes by selecting the choices in three radio buttons
, the result must be shown the search form in attractive way
I am familier with some PHP, MySQL, CSS and little Java script
now what do you think where should i begin to start

Have a look here http://labs.adobe.com/technologies/spry/samples/data_region/MultipleFiltersSample.html
Gramps

How to know if a field is input or display when doing a BDC

Similar Messages

Maybe you are looking for