How to know if CD-ROM
How could I know if a system root is a CD-ROM? I searched all the api, I got close when I found FileSystemView let me know the name of the volume, but I have not find how to know if it is a CD-ROM. Can some one help me?
it will tell you if its a floppy drive using the method isFloppyDrive(File dir), but i suppose the API on this topic has not yet matured enough.... try submitting an RFP for this feature....
Similar Messages
-
How to know if this computer can handle a certain monitor's resolution?
I am looking to buy a new monitor, but I am at a loss as to how to know whether my computer can handle the monitor's resolution, will be compatible with it. I used to run two NEC Multisync FE991SB (CRT) monitors side by side, and one of them died. Their native resolution seems to be 1280x1024 per monitor. I am considering buying a DoubleSight DS-263N (LCD) monitor, which has a native resolution of 1920 x 1200, and running it alongside the NEC Multisync FE991SB that has not died. Here are the relevant vital statistics:
Hardware Overview:
Machine Name: Apple Power Mac G5
Machine Model: PowerMac7,3
CPU Type: PowerPC G5 (2.2)
Number Of CPUs: 2
CPU Speed: 1.8 GHz
L2 Cache (per CPU): 512 KB
Memory: 4 GB
Bus Speed: 900 MHz
Boot ROM Version: 5.1.8f7
Graphics/Displays:
GeForce FX 5200:
Chipset Model: GeForce FX 5200
Type: Display
Bus: AGP
Slot: SLOT-1
VRAM (Total): 64 MB
Vendor: nVIDIA (0x10de)
Device ID: 0x0321
Revision ID: 0x00a2
ROM Revision: 2060
Displays:
NEC FE991SB:
Resolution: 1280 x 1024 @ 85 Hz
Depth: 32-bit Color
Core Image: Supported
Mirror: On
Mirror Status: Hardware Mirror
Online: Yes
Quartz Extreme: Supported
DoubleSIght monitor specs (I might buy one of these):
Display
Viewable Area:550.08 x 343.8(H x V)Pixel Pitch:0.2865mm x 0.2865mmMax. Visible Angle:178' / 178'Response Time:5 ms (G T G)Brightness:500 cd/m typ.Aspect Ratio:16:10Contrast Ratio:800:1 typ.Recommended Resolution:1920 x 1200 max
Monitor Stand
Adjustable Monitor Stand:Tilt
Video Signal
Horizontal Frequency:31.5~ 82.3KHzVertical Frequency:56~76HzDigital Signal:HDCP Capable
Interface
Interface type:VGA 15-pin D-sub type/DVI-D type
Power
AC:Input: AC 110~220V, 50~60Hz; Output: DC+24V, 5.0APower Consumption:135W max., 2W Power Save Mode
Characteristics
Controls:Graphic OSD, Auto AdjustmentUSB:4 USB portsDimension:23.5in W x 18.0in H x 11.0in DWeight:23 lbs.Certification:FCCWarranty:Three year limited warranty (parts & labor)
VESA
VESA:100mm x 100mm
Any advice on how i can learn about compatibility? And on what card i need to buy, if i do need to buy one? Thanks.Dear Discussion Folks,
Thank you all so much for your help. I think I understand now, as a result of your comments and this reply from NVIDIA customer support:
"I understand from your mail that you would like to know if GeForce FX 5200 Ultra supports your monitor that has a recommended digital resolution of 1920 x 1200.Please be informed that as per the NVIDIA records, the maximum digital resolution supported by this graphics card is 1600 x 1200 and the maximum analog resolution supported by this graphics card is 2048 x 1536. Since you have mentioned in your e-mail that the Apple's specs page says that the maximum digital resolution supported by this graphics card is 1920 x 1200, in this case, I request you to contact Apple Support over phone and get confirmed on this. The reason why I am requesting you to contact Apple is because, we at NVIDIA, manufacture only the basic chipsets for the graphics cards and sell them to Apple Computers. The Apple Computers produce the graphics cards using the NVIDIA chipsets."
This reassured me that there's no reason to worry about the appearance of a contradiction between the Apple tech sheet and the NVIDIA tech sheet. I went ahead and ordered this monitor today: the DoubleSIght DS- 265W.
(by the way, sorry about typing 1900x1200 when I meant 1920x1200).
After it arrives in a week or two, I'll update this thread to confirm that its resolution is supported by the GeForce FX 5200 Ultra card.
Thanks again,
Mark -
How to know if my HP Pavilion Notebook can support Super Multi Blue-Ray drive?
Hi,
My HP laptop is:
HP Pavilion dv6-6093ex Entertainment Notebook PC support
LM610EA#A2N
How to know if my HP Pavilion Notebook can support Blue-Ray drive?.
I need to install a Super Multi Blue-Ray drive, with these capabilites::: read and write all types of disc formats in one convenient package: CD±R, DVD ±R , CD±RW, DVD±RW, CD-ROM, DVD-ROM, DVD-RAM and Blu-ray disc.
If it can support, then I must purchase HP Blue-ray device, or I can purchase any other brands, such as LG 16x Internal Blu Ray/DVD/CD Burner Writer Drive + sata data & power cables .
First of all: my Optical drive is: LightScribe SuperMulti DVD±R/RW with Double Layer Support, and with the capabilities
hp CDDVDW TS-L633R
Media Type DVD Writer
Name hp CDDVDW TS-L633R
Availability Running/Full Power
Capabilities Random Access, Supports Writing, Supports Removable Media
Read capabilities CD-R, CD-RW, CD-ROM, DVD-RAM, DVD-ROM, DVD-R, DVD-RW, DVD+R, DVD+RW, DVD-R DL, DVD-RW DL, DVD+R DL
Write capabilities CD-R, CD-RW, DVD-RAM, DVD-R, DVD-RW, DVD+R, DVD+RW, DVD-R DL, DVD+R DL
Config Manager Error Code Device is working properly
Config Manager User Config FALSE
Drive E:
Media Loaded FALSE
SCSI Bus 0
SCSI Logical Unit 0
SCSI Port 0
SCSI Target Id 1
Status OKAnyway, Could you please confirm for me this the Maximum resolution of my VGA is 1366 by 768 pixels, and cannot be extended.
That is correct. It cannot be extended. That is the limit for the built-in display. Using an external display that is capable of higher resolution might help in that matter but then you loose the portability of the laptop.
I came across a free BluRay player just this week, it is found here. Leawo Blu-ray player: http://www.leawo.org/blu-ray-player/
It is the only free BluRay player I have found.
That is about all I can do to help. The other possibility would be to get an external Bluray drive that can fulfill all your expectations, give you lightscribe, and possibly a BluRay player included with the purchase. It would be much less worrisome on your part and there would not be any modifications to the laptop.
{---------- Please click the "Thumbs Up" to say thanks for helping.
Please click "Accept As Solution" if my help has solved your problem. ----------}
This is a user supported forum. I am a volunteer and I do not work for HP. -
How to replace CD/DVD-Rom on Satellite Pro 2100
Hello,
My dvd-rom drive in the laptop is old and broken, now I have here a another dvd-rom drive but I don't know how to remove the old dvd-rom without removing all parts of my laptop. Is there some service manual how to replace the dvd-rom drive?Hi
Im not 100% sure about the CD/DVD drive replacement on this notebook but I assume the procedure is very similar to another notebooks drives.
Mostly the ODD is secured with the one screw at the bottom of the unit.
You will have to remove this screw to pull out and to swap the drive.
But be careful and dont do it if you have no experience!!!
By the way, not all drives are compatible and supported because of the master/slave/c-sel settings. If you dont know what drives are compatible you should ask the ASP in your country for a advice!!! -
Hi Team,
R12 Instance :
Oracle Installed Base Agent User Responsibility --> Item Instances -->
Item Instance: Item Instances > View : Item Instance : xxxxx> Contracts : Item Instance : xxxxx> Service Contract: xxxxx>
In the above page there are two table regions.
Notes.
-------------------------------------Table Region---------------------------
Attachments
-------------------------------------Table Region---------------------------
--the attachments are shown using the query from the fnd_lobs and fnd_docs etc...
I want to know what are the document types are displayed in this page ?
--We developed a custom program to attach the attachments to the services contracts and the above seeded OAF page displays those ..as needed.
But after recent changes..the Attachments--> table region is not showing the attachments.
I have verified the query..and could not find any clue in that..
but i need some help if you guys can provide..
SELECT *
FROM
*(SELECT d.DOCUMENT_ID,*
d.DATATYPE_ID,
d.DATATYPE_NAME,
d.DESCRIPTION,
DECODE(d.FILE_NAME, NULL,
*(SELECT message_text*
FROM fnd_new_messages
WHERE message_name = 'FND_UNDEFINED'
AND application_id = 0
AND language_code = userenv('LANG')
*), d.FILE_NAME)FileName,*
d.MEDIA_ID,
d.CATEGORY_ID,
d.DM_NODE,
d.DM_FOLDER_PATH,
d.DM_TYPE,
d.DM_DOCUMENT_ID,
d.DM_VERSION_NUMBER,
ad.ATTACHED_DOCUMENT_ID,
ad.ENTITY_NAME,
ad.PK1_VALUE,
ad.PK2_VALUE,
ad.PK3_VALUE,
ad.PK4_VALUE,
ad.PK5_VALUE,
d.usage_type,
d.security_type,
d.security_id,
ad.category_id attachment_catgeory_id,
ad.status,
d.storage_type,
d.image_type,
d.START_DATE_ACTIVE,
d.END_DATE_ACTIVE,
d.REQUEST_ID,
d.PROGRAM_APPLICATION_ID,
d.PROGRAM_ID,
d.category_description,
d.publish_flag,
DECODE(ad.category_id, NULL, d.category_id, ad.category_id) category_id_query,
d.URL,
d.TITLE
FROM FND_DOCUMENTS_VL d,
FND_ATTACHED_DOCUMENTS ad
WHERE d.DOCUMENT_ID = ad.DOCUMENT_ID
*) QRSLT*
WHERE ((entity_name ='OKC_K_HEADERS_V'-- :1
AND pk1_value IN ( 600144,599046) --:2
AND category_id_query IN (1, :3, :4, :5, :6, :7) )
AND datatype_id IN (6,2,1,5)
AND (SECURITY_TYPE =4
OR PUBLISH_FLAG ='Y')))
--='000180931' -- 'ADP118'
The above seeded query is the one which is used for table region to retrieve the data..
how to know the dynamic values for this : AND category_id_query IN (1, :3, :4, :5, :6, :7) )
--SridharHi Patricia,
is it working for restricted key figure and calculated key figure ??
Note Number Fisc Period Opening Days
1 1 2
2 1 3
3 1 0
because I have other restriction, so I create two restricted key figure..
RK1 with restriction : Total Number of Note,
RK2 with restriction : Total Opening Days ,
then I Created a calculated key figure, average opening days in a period
CK1 = RK2 / RK1..
in this case, I am not sure if it will work or not..
for example, during RK2 calclation, it might be this 2+3 = 5, the line with 0 will be ignored..
during RK1 calcualtion, it might be 1 + 1 + 1 = 3. ---> Not sure in this case, the line with opening days 0 will be calculated or not..
could you please confirm.. -
How to know through back end employee position in Requisition approval
Hi all,
I have one Employee_id ,how to know this employee has a authority to approve the requisition through back end. what is the link between
per_all_people_f and PO_POSITION_CONTROLS_all.
Thankshi
I have one small doubut, what is the differnce in the PO_Requisiiton_headers_all Table Have PREPARER_ID and PO_action_history table Have Empolyee_id and also in po_action_history have created by .what is the main differnce between thease three PREPARER_ID,empolyee_id and created_by .
Ex :- select created_by,last_updated_by,PREPARER_ID,creation_date,last_update_date
from apps.po_requisition_headers_all where requisition_header_id=6731548
O:P- created by last_updated_by prepaper_id creation_date last_update_date
1216 83867 72208 5/26/2009 8:48:59 AM 5/26/2009 12:41:19 PM
select created_by,last_updated_by,employee_id,action_code,creation_date,last_update_date
from apps.po_action_history where object_id=6731548 order by sequence_num
CREATED_BY, LAST_UPDATED_BY, EMPLOYEE_ID, ACTION_CODE, CREATION_DATE, LAST_UPDATE_DATE
1216, 1216, 72208, IMPORT, 5/26/2009 8:48:59 AM, 5/26/2009 8:49:27 AM
1216, 1216, 72208, SUBMIT, 5/26/2009 8:55:41 AM, 5/26/2009 8:55:41 AM
1216, 1216, 72208, RESERVE, 5/26/2009 8:55:41 AM, 5/26/2009 8:55:42 AM
1216, 1216, 72208, FORWARD, 5/26/2009 8:55:42 AM, 5/26/2009 8:55:43 AM
1216, 83867, 72208, APPROVE, 5/26/2009 8:55:43 AM, 5/26/2009 12:41:13 PM
My Mian Problem is why same employee forward him self to approve the requisiiton.
but his last updated_by is different.
I am not Understanding the functionality of this .
Thanks -
My Ipad has retina/wifi/cellular/16gb...but how to know its ipad4...because no were i see ipad4 (ipad box/website)...i agree it has lightning to usb but not mentioned on particulars...and also no 16gb is showed in usage when i checked in settings....how do come out of this ?
If it has the Lightning port, it is an iPad 4. iPad 3rd gen and all below came with the 30-pin connector. If you want, post the model number and we will verify what it is exactly.
Identify your iPad:
http://support.apple.com/kb/HT5452 -
How to know my macbook pro supports usb2 or usb3?
How to know my macbook pro supports usb2 or usb3 ?
And if it is USB 2, will external hardisk which support usb 2 would be compatible with & vice-versa?
What would be the cons?USB 3.0 ports were only added to those MacBook Pros that were released in mid 2012 and later.
So you would have USB 2.0 ports on your machine.
But USB 3.0 and 2.0 are 'compaitble,' somewhat - you just won't be able to get the throughput of a USB 3.0 to USB 3.0 connection.
Clinton -
With a contract number, how to know the total PO release value against it?
Usually one contract corresponds to multiple PO records, now we know the contract number, then how to know the total PO release value against this contract. In other word, we would like to know the total release value of all the POs with the same contract number. To just input the contract number in EKPO table? but then look for which field in this table to add these PO release values up?
We will give you reward points!
Thanks!hi Mohammad,
By following your instruction, input the contract number 4800000112 into Document number field, then hit Enter, get the following (only copy two records here for example), but kind of a mess. Could you let us know which one is the PO release value for this contract?
Contract Type Vendor Name PGp Agmt. date
Item Material Short text Mat. group
D I A Plnt SLoc Targ.qty. Un Net price Curr. per Un
4800000112 WK 2000012012 GULF INTERSTATE FIELD SERVICES QBH 06/20/2006
Agreement start06/20/2006 Agreement end 12/31/2007
Tgt. val. 1,000,000.00 USD Open 1,000,000.00 USD 100.00 %
00001 Inspection Svcs, Construction R3VNI
L U 0 UL 0.00 USD 1 EA
00002 Chief Inspector R3VNI
L U 0 DAY 390.00 USD 1 DAY -
How to know whether balance carry forward has happened or not
How to know , whether balance carry forward has happened or not for a perticular GL account or for the company code as a whole?
If the account is a balance sheet account, you can merely look at the beginning balance for the same balance sheet account for the beginning of the next fiscal year FS10N. The beginning balance will equal the previous year's ending balance. Since this does not happen automatically, you will know that carry forward has not been done if a balance sheet account has no beginning balance in the following fiscal year.
If you are talking about For P&L GL accounts, you can check the acvitity in the retained earnings accounts to make sure that they have been updated for the P&L activity. You can identify the retained earnings account by looking at the master data for the account in the section "P&L statmt acct type" and pulling up the menu to see the actual retained earnings account number.
You can perform carry foward (GVTR) as many times as you want but normally once it has been ran, any postings to a previous fiscal year are automatically carried forward to the current year after that initial run. -
How to know the balance and validity of internet data in iPad
How to know the balance and validity of internet data in iPad?
Sir I m using internet in ipad4 with airtel network
They provide me 2gb data with the amount of 255 rupees
And now I inserted the sim in my ipad4
And start the surfing on safari n all
And now I wanted to know how much data is balance. -
How to know which master data objects need to activated in R3
SALES OVERVIEW CUBE -0SD_C03
How to know which master data objects need to activated from delivery version to active version in R/3 for a particular standard cube like 0SD_C03.
its very urgent please advise.
R/3 in RSA5
Sales Master Data
0ACCNT_ASGN_TEXT Account assignment group for this customer
0ACCNT_GRP_TEXT Customer account group
0BILBLK_DL_TEXT Locked
0BILBLK_ITM_TEXT Billing block for item
0BILL_BLOCK_TEXT Billing block in SD document
0BILL_CAT_TEXT Billing Category
0BILL_RELEV_TEXT Relevant for Billing
0BILL_RULE_TEXT Billing rule
0BILL_TYPE_TEXT Billing Type
0CONSUMER_ATTR Consumer
0CONSUMER_LKLS_HIER Consumer
0CONSUMER_TEXT Consumer
0CUST_CLASS_TEXT Customer Classification
0CUST_GROUP_TEXT Customer Group
0CUST_GRP1_TEXT Customer Group 1
0CUST_GRP2_TEXT Customer Group 2
0CUST_GRP3_TEXT Customer Group 3
0CUST_GRP4_TEXT Customer Group 4
0CUST_GRP5_TEXT Customer Group 5
0DEALTYPE_TEXT Sales Deal Type
0DEL_BLOCK_TEXT Delivery block (document header)
0DEL_TYPE_TEXT Delivery Type
0DISTR_CHAN_TEXT Distribution Channel
0DIVISION_TEXT Division
0DLV_BLOCK_TEXT Schedule line blocked for delivery
0DOC_CATEG_TEXT SD Document Category
0DOC_TYPE_TEXT Sales Document Type
0INCOTERMS_TEXT Incoterms (Part 1)
0INDUSTRY_TEXT Industry keys
0IND_CODE_3_TEXT Industry code 3
0IND_CODE_4_TEXT Industry code 4
0IND_CODE_5_TEXT Industry code 5
0IND_CODE_TEXT Industry code
0ITEM_CATEG_TEXT Sales document item category
0ITM_TYPE_TEXT FS item type
0KHERK_TEXT Condition Origin
0MATL_GRP_1_TEXT Material Group1
0MATL_GRP_2_TEXT Material Group 2
0MATL_GRP_3_TEXT Material Group 3
0MATL_GRP_4_TEXT Material Group 4
0MATL_GRP_5_TEXT Material Group 5
0MATL_TYPE_TEXT Material Type
0MAT_STGRP_TEXT Material statistics group
0NIELSEN_ID_TEXT Nielsen ID
0ORD_REASON_TEXT Order reason (reason for the business transaction)
0PICK_INDC_TEXT Indicator for picking control
0PRODCAT_TEXT Product Catalog Number
0PROD_HIER_TEXT Product Hierarchy
0PROMOTION_ATTR Promotion
0PROMOTION_TEXT Promotion
0PROMOTYPE_TEXT Promotion Type
0PROV_GROUP_TEXT Commission Group
0REASON_REJ_TEXT Reason for rejection of quotations and sales orders
0REBATE_GRP_TEXT Volume rebate group
0RECIPCNTRY_TEXT Destination country
0ROUTE_TEXT Route
0SALESDEAL_ATTR Sales deal
0SALESDEAL_TEXT Sales deal
0SALESORG_ATTR Sales organization
0SALESORG_TEXT Sales Organization
0SALES_DIST_TEXT Sales district
0SALES_GRP_TEXT Sales Group
0SALES_OFF_TEXT Sales Office
0SCHD_CATEG_TEXT Schedule line category
0SHIP_POINT_TEXT Shipping point/receiving point
In BW
Base Unit of Measure 0BASE_UOM
Bill-to party 0BILLTOPRTY
Calendar Day 0CALDAY
Calendar Year/Month 0CALMONTH
Calendar Year/Week 0CALWEEK
Change Run ID 0CHNGID
Company code 0COMP_CODE
Cost in statistics currency 0COST_VAL_S
Credit/debit posting (C/D) 0DEB_CRED
Distribution Channel 0DISTR_CHAN
Division 0DIVISION
Number of documents 0DOCUMENTS
Sales Document Category 0DOC_CATEG
Document category /Quotation/Order/Delivery/Invoice 0DOC_CLASS
Number of Document Items 0DOC_ITEMS
Fiscal year / period
Fiscal year variant 0FISCVARNT
Gross weight in kilograms 0GR_WT_KG
Number of Employees 0HDCNT_LAST
Material 0MATERIAL
Net value in statistics currency 0NET_VAL_S
Net weight in kilograms 0NT_WT_KG
Open orders quantity in base unit of measure 0OPORDQTYBM
Net value of open orders in statistics currency 0OPORDVALSC
Payer 0PAYER
Plant 0PLANT
Quantity in base units of measure 0QUANT_B
Record type 0RECORDTP
Request ID 0REQUID
Sales Employee 0SALESEMPLY
Sales Organization 0SALESORG
Sales group 0SALES_GRP
Sales Office 0SALES_OFF
Shipping point 0SHIP_POINT
Ship-To Party 0SHIP_TO
Sold-to party 0SOLD_TO
Statistics Currency 0STAT_CURR
In R3 RSA5 we have all the Master data data sources as mentioned above, and BW also. How to find the related Master data Infosource in R/3 Master data Data sources.
Thanks in advance,
Bhima.
Message was edited by: Bhima Chandra Sekhar GuntlaHi,
<i>How to know which master data objects need to activated from delivery version to active version in R/3 for a particular standard cube like 0SD_C03.</i>
I think, you are looking for master data sources(text,attributes,hier).Am i right?
If so, This cube has almost all SD master data characterstics. So you can activate all the all master data datasources of SD in r/3 (SD-IO).
Any way you requirement does not stop only by using this cube . You will activate all other cubes in SD also. So if you want to activate only needed master data datasources when you are activating a cube, the job becomes senseless. There is no problem(wrong) in activating all master data available under that application , even though you want to activate only one cube.
With rgds,
Anil Kumar Sharma .P -
How to know BW report there in how many roles
dear master's,
In the BW system version 3.5 ,how to know roles by BW report, i have checked in SUIM for cheking the same,i could able to search by T code and object not by report in the role menu
Edited by: rameshbabu muddana on Feb 12, 2009 1:56 PM
Edited by: rameshbabu muddana on Feb 12, 2009 1:57 PMHi,
You can find the roles which all having particular BW report by the table AGR_1251.
For this you need to know the technical name of the report, you can find the technical name of the report either in Bex analyzer or in RSRT.
For granting access to any BW report in a role the technical name of the role should be included in the object S_RS_COMP,
1) go to transaction SE16.
2) open the table AGR_1251
3) enter in the field "object with "S_RS_COMP"
4) and the field "FIELD" with "RSZCOMPID"
5) Give the BW report (technical name) which you want to search in the field "LOW"
6) click on execute.
Caution: in case you are giving complete techincal name of the report, it will show only if the roles are updated under the object S_RS_COMP with complete technical names, however if in the roles you are giving ranges something (as example : BW_FIN_*) you need to give the range in SE16 as well.
Hope this helps you!
Regards,
Ananth -
Hi Gurus,
How to know the purchase order created with one quotation or not. because when i am trying to create PO with /ME21N through DOcumen Overview on. there is list of Quotation. i created PO with XYZ quotation. and after creation of PO i am trying to create another PO with another quotation but in that list still XYZ quotation is Displying. so how to knows once PO cretd with Quotation or not. . and I dont wanted to disply quotation once created Po.
Thanks in Advance.
AnthyodayaDear,
You can distingush between open and close RFQ.
Go to Document Overview in PO, Select RFQ, then in RFQ Screen
Go to Dynamic Selection --> Discription of Selection paramater --> Sel;ection Paramerter
here select open -- A-OFFPN
and other selection also avaible.
this may help u
Reagrds,
Pardeep Malik
Edited by: Pardeep Malik on Mar 16, 2009 5:31 AM -
How to know Packing should be at Delivery level or shipment level?
Hello Experts,
As per my knowledge Packing can be done at delivery level and Shipment level but how to know at material should be packed at what level?
ThanksHi Prashant,
Normally we update Matl Grp Pack.Matls field in BASIC DATA 1 of Material Master in Packaging Material Data section.
Based on that details, you can get to know that if this needs to be Packed in What type of Material.
Depending upon your design of Packing you can get to know when should you do the packing.
Regards,
MJ.
Maybe you are looking for
-
PHDs on multiple computers, NHDs on others
I'd like to set up a system in which each user has one (or perhaps more than one, if possible) computer on which they use a portable home directory, but I'd like to allow them to log in from other people's main machines using their network directory.
-
Help I can't open raw files in lightroom-tearing my hair out....
That is lightroom 2 I have that info may be helpful.
-
A nice addition to Raptor would be a where clause generator: Selecting cells in a grid (of one or multiple data rows) and execute the "Where Clause Generator" action would generate the where clause to restrict the current select by the values in the
-
How to solve the error (Device is no longer present in the system). ?
I have error say (Device is no longer present in the system). What should I do to solve this problem and reconnect the hardware with software again?
-
Answer: JgraphT-how to set a weight on an edge of undirected graph
I'm sorry. that was stupid. if any of you use it you probably know I should use this definition: ListenableUndirectedWeightedGraph g = new ListenableUndirectedWeightedGraph ( ); bye.