How to know if Message mapping failed?

Hi gurus,
do anyone know how to determine in clean up method if a message mapping failed? i just want to know the status of the message mapping to put it in the trace.
Regards

Thanks for your reply Abhishek,
but this is not exactly what i need.
Suppose following Graphical message mapping: two number A and B need to be divided, A/B. If B equal 0 (zero), this will throw Runtime Exception. In some point of my mapping (maybe at the end of it) i need to catch this Exception, or at least i need to know exception happened. I need to know it to update a table with message mapping status, eg succesfully executed, runtime error, etc.
Regards.

Similar Messages

Request message mapping failed in QAS server

Hi ,
I've transported the Developed objects from DEV Server to QAS Server using CTS method , now when i m making any changes in the development system and re transporting it back to quality server , its showing one or the other error ,
In one case it shows "Request message mapping failed" just we added one filed and mapped it. The filed can be seen in the repository but in the moni it says this filed is missing even though it is working fine in development, but in quality , i dont know why this problem is coming
The scenario is jdbc -
> xi ---> proxy,
this problem is only is quality , in dev its working fine
pl help , i running short of time ,
rgds
mojib

Ravi,
In test tab , both in message mapping and configuration , its successful but still this error..
rgds
mojib

Error status code 400 with the description Message mapping failed

Hi,
I tried to build RFID outbound scenario using ECC 5.0, XI and AII 2.1.
When I send IDOC message:AIDOPMSG.AIDOP01 from ecc 5.0 to XI(ouput message type is OperationalIn and message mapping is OperationalInTo), i get following error:
<SAP:Code area="INTERNAL">HTTP_RESP_STATUS_CODE_NOT_OK</SAP:Code>
<SAP:P1>400</SAP:P1>
<SAP:P2>Message mapping failed</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>Message mapping failed</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>HTTP response contains status code 400 with the description Message mapping failed Boundary SAP_57D7D47469E09543A1EA0002CBDA0492_END could not be found</SAP:Stack>
I am using standard AUTO-ID 2.1 XI contents. If any of you have encountered such error message, then could you please help me understand the meaning and how to fix it.
thanks in advance,
Ashit

hi Ashit,
take a look at my weblog on how to test your mapping:
/people/michal.krawczyk2/blog/2005/09/16/xi-how-to-test-your-mapping-in-real-life-scenarios
maybe with this you'll be able to find out the error
Regards,
michal

How to Edit the message mapping in Quality server

Hi Experts,
Can you plz tell me, is there any way to edit the message mapping in QUALITY system?

Hi,
>>>>Can you plz tell me, is there any way to edit the message mapping in QUALITY system?
the correct one:
- correct on DEV
- export/import
and it's edited on quality
if you edit on qulity by changing the SWCV to editable then remember to
do the change in DEV later and export import and solve the version conflict on quality
as if you forget to do this someone will have to solve in the future and will not know why....
Regards,
Michal Krawczyk

Message Mapping fails because of RFC

Guys,
1) I have some messages failed in SXMB_MONI because message mapping for those interfaces was not executed successfully. In trace I can see the following:
"com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed Connect_PM TYPE=A ASHOST=121.12.2.15 SYSNR=02 GWHOST=121.12.2.15 GWSERV=sapgw02 PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR partner not reached (host ?, service ?) TIME Wed Jul 11 07:20:27 2007 RELEASE 640 COMPONENT NI (network interface) VERSION 37 RC -10 COUNTER 1024</Trace>"
I realize it is a network connection problem, but..
Any ideas?
2) Actually, in my mapping programs I have to perform many RFC's to both XI and target/source SAP systems, in order to get some information. The techique that I am using for RFC's is through Java's com.sap.mw.jco.* package. And I connect to systems by giving the IP address, system number, username and password of the systems and then I execute the remote enabled function modules.
However. when I have many RFC's some of them fail, maybe because the maximum number is reached. And then I have to manually restart them from SXMB_MONI and they are successfully processed.
Any ideas?

But you said you call many RFCs inside XI, right?
The proper way of doing it is not using JCo directly, but using Mapping Lookup API instead. In this way, you won't need to maintain the connection details inside the code, but in the communication channels.
Check this out: https://help.sap.com/javadocs/NW04S/current/pi/index.html (lookup api).
There are some code examples within the classes (for example, RfcAcessor).
I think there is also a SDN documentation by Michal Krawczyk regarding RFC Lookups.
Just search for it.
Regards,
Henrique.

RFC Lookup's in message mapping fail with RuntimeException for no reason

Hi guys,
We have developed interfaces that execute a lot of RFC's from Message Mapping, by making use of RFC Lookup API.
In ID, in the corresponding RFC Receiver Communication Channel we have set the number of maximum connections to 100.
However, when a big number of Idocs with lots of items is sent to XI some messages fail in XI because mapping fails with a runtime exception that is not correct, since there is a return value found from the execution of the RFC function. And when I am testing the mapping in Test mode of XI IR, the mapping is executed successfully.
Do you think that by increasing the maximum number of connections in Communication Channel, it will take effect?
Evaggelos

Hi Evaggelos,
DECREASE, may be til 10.
Regards,
Udo

How to Transport only Message mapping in already created transport.

Hi All,
I have changed message mapping object in ESR and now need to transport the new version to Q enivroment using CTS.
Can somebody tell me the detailed steps for doing this.???
Thanks in advance!!!!

hi,
you refer from 33 page on words below in doc :
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/20ccd0ec-2839-2b10-0097-828fcd8ed809?QuickLink=index&overridelayout=true
becuase i dont know are u release the transport /not.
if ur release and everything fine, then simply go to QUAlity Sys -> tools-> impoted desig time obj.

Create IDoc from flat file - How to do the message mapping

Hi everybody,
I want to create an IDoc from a flat file.
The file structure looks like this:
MT_XYZ
- Node001       0...1
- Leaf001
- Node002       0...unbounded
   - Node003    0...1
      - Leaf002
      - Leaf003
   - Node004    0...1
      - Leaf004
   - Node005    0...1
      - Leaf005
I have created a mapping and all the other stuff to set up the IDoc adapter.
Now when I try to test the interface the IDoc is created properly but obviously no information from the nodes "Node003" to "Node005" is inserted in the IDoc. Only the information kept in the elements (leafs) of "Node001" are inserted.
All IDoc segments and their "Segment" elements are linked to the root node of the file structure "MT_XYZ". I tried to link some IDoc segments only to "Node002" but then this segment is not created.
So how can I set up the message mapping in a way that the information from "Node003" to "Node005" is transported to the IDoc? Can anyone help me here?
Thanks in advance for all answers!
Regards,
Torben
Edited by: Torben Hönemann on Dec 14, 2009 4:26 AM

Hi Torben,
>>I want to create an IDoc from a flat file.
So you are using File content Conversion on the sender side. Right?
>>no information from the nodes "Node003" to "Node005" is inserted in the IDoc.
Are these information available in the source XML (you can check in transaction SXMB_MONI-> Input Payload).. There is a limitation in File Content Conversion of File adapter and it is that I can make an XML structure of 3 level.. Since these nodes details are in level 4 and 5 they should be missing in Source XML structure itself (after content conversion of File adapter). check that
>>So how can I set up the message mapping in a way that the information from "Node003" to "Node005" is transported to the IDoc? Can anyone help me here?
So you need to take an alternate approach where you do File Content Conversion and make 3 level structure.. then using a mapping convert this three level structure to your 5 level one and then try to map with the idoc.
Check this blog for an idea
http://www.riyaz.net/blog/xipi-file-content-conversion-for-complex-structures/
http://www.riyaz.net/blog/xipi-convert-flat-file-to-deeply-nested-xml-structures-using-only-graphical-mapping/
Regards
Suraj

Message mapping failing

Hi all,
I am working in a scenario in which i am reading an xml file , but it is failing as it contains encodingas UTF-16, if i am changingthis to UTF-8 the mapping is working. please help
Thanks in advance
Regards
Martin

Hi Martin,
This can be done by changing configurations in file adapter.
Specify file type as Text and Under File Encoding specify code page as UTF-8,
this will convert the incoming xml encoding as UTF-8.
Regards
Pradeep P N

How can i resend messages which failed with System Error

hi Can any one please help me with 3 messages stuck in adapter engine ,they are failing with system error,I tried to resend them but still they failing with the system errorXI_J2EE_ADAPTER_XI_HANDLER.so can any body help me with this problem .
thanks
p

Hi,
Check the threads..
[File (xml)>>xi>>IDoc;
[Problem in Webservice -> XI -JDBC;
[Problem in JDBC Reciver Channel;
Regards,
Prakasu

How to fix error message: PrintJobMgr failed

Since upgrading to Snow Leopard 10.6.4 I've been unable to print to my Epson Stylus Photo R2400 printer. I can print fine to the other printer cabled to the iMac (HP7960). The following error message appears in the print queue:
"PrintJobMgr failed"
Does anyone have a fix for this issue? Can't find anything in Snow Leopard support. Help!?

I had this same error, due to a recent upgrade to 10.6.4, on a HP 5100 deskjet.
I found a simple version of the above solution works just fine
- - *Open SystemPreferences-->Print&Fax*
- - *Highlight your problem printer* (hp deskjet 5100 for me)
- - ( Delete it... ) Click the Minus [-] at the bottom of the list.
- - ( re−Add it...) Click the Plus [+] next to it.
When my printer is connected to the AirPort express I see:
hp deskjet 5100 . . . Bonjour
*When you re-Add the printer, there is a change that may be critical:*
-Select your printer,
- Click on the *Print Using:* drop down
-- Click *"Select Printer Software..."*
+type hp and wait, or scroll down+
-- Click on *"HP DeskJet Series"*
- Click [OK] then [Add]
And you should be good to go.
(Note: If connected locally to USB, then you would start there.)
(Note: The Supplies only show when you are connected locally to USB on this one.)

How to know the message class and message number

When the web client show warnning message,
How can i to find the message class and message number?
Thnaks
Kevin

Hi,
You can goto tcode SAAB and activate the log for Checkpoint group BSP_WD_EXCEPTION_DISPLAY. whenever you log into Web UI you can see the details of the message.
To troubleshoot teh message goto SE91 and enter the message class and message number. Select the message and then click on whereused. You will see all programs where this message is used.
Hope this helps.
Regards,
Chandrakant

How to monitor message mapping in BPE

Hello all,
I use an integration process to do several mapping after each other.
When I try to check the result of the first mapping in the BPE Log, I get the message "No message available for slection".
I can open the input message from the Container without any problem. But not the output message.
For both (Input and Output Message) it shows that there is one message.
Do I have to increase the trace level of the BPE? How? (Trace level in SXMB_ADM is 3)
We use 2004s SP12 (new workflow log).
Any help appreciated.
Jürgen

Hi Prabhu,
Thank you for the reply. I know this document, but it doesn't help.
As I described, I know how to check a message mapping in BPE.
But when I try to open the MESSAGE_OUT, as described on page 9
I get an error message "No message available for this selection".
Although it shows that there is one message in the table (MESSAGE_OUT <1 Entry>)
Any other idea?
BR,
Jürgen

How do I handle the error message Adobe failed to lauch its core DIL

How to handle the message Adobe failed to lauch its core DIL?

Run the Acrobat Cleaner Tool, reinstall.
Mylenium

Flash Builder 4.6 compile "Map Failed" error

HI，all
    First，Adobe have no place for bug report . Yes,you will say http://bugs.adobe.com/jira/secure/Dashboard.jspa ,but ,i have no account, also doesn't know how to register one.
OK ,Today..i will compile an mobile project have 1.5G+ pictures and swfs ..
i met a "Map failed" error when i make a IOS Package..
The .log file content is :
!ENTRY com.adobe.flexbuilder.project 4 43 2012-03-15 02:08:09.404
!MESSAGE Map failed
!STACK 0
java.lang.Exception
          at com.adobe.flexbuilder.project.internal.FlexProjectCore.createErrorStatus(FlexProjectCore. java:1019)
          at com.adobe.flexbuilder.util.logging.GlobalLogImpl.log(GlobalLogImpl.java:66)
          at com.adobe.flexbuilder.util.logging.GlobalLog.log(GlobalLog.java:52)
          at com.adobe.flexide.multiplatform.ios.packaging.IPAPackager.create(IPAPackager.java:276)
          at com.adobe.flexide.multiplatform.ios.exportrelease.IOSExportReleaseHandler.doPackage(IOSEx portReleaseHandler.java:264)
          at com.adobe.flashbuilder.project.multiplatform.ui.exportrelease.MultiPlatformExportReleaseV ersionManager.doExport(MultiPlatformExportReleaseVersionManager.java:198)
          at com.adobe.flexbuilder.exportimport.releaseversion.ui.ExportReleaseVersionWizard$1.run(Exp ortReleaseVersionWizard.java:208)
my hardware:
G41 MotherBoard + 8G RAM + E7200CPU
My software:
windows 2008 r2 with sp1 (64bit)+ FlashBuilder 4.6           default config ,very clean system, just install today.
And , i transfer my project to a Windows XP host ...Oh, My god .....it works , the IOS package produced normally.
SO......so.......i cann;t say any word now .....is adobe hate windows 7 (32bit,i tested ,same problem ) and Windows 2008??
Raymond

I constantly had issues with this. I managed to run into the max for increasing the heap space. I was able to get beyond the limit by flagging the FlashBuilder.exe file to allow it to allocate to higher memory address ranges. I'm on a 64 bit machine, so the only limitation was the 32 bit FlashBuilder process. Anyways i was able to get from 1024m up to 1720m. Also note that FlashBuilder 4.7 Beta is out and it is a native 64 bit application, so you will get higher addressing there. I just found it to be too buggy for my every day development tasks. Also missing the Design view really hurts development. I hope they put that back in.
Here's more detail on how I got beyond the java heap ceiling.
http://chrsmrtn.azurewebsites.net/flash-builder-java-heap-errors-limitations-of-xms-and-xm x/

How to know if Message mapping failed?

Similar Messages

Maybe you are looking for