How to link two modules of data when querying the data ?

Hi ,
I am using Designer editor to create a form .
I am having two modules with the tables EMPLOYEE and department .
In my form ,I want to display the data of each employee with the department data .
How to link the two tables data in the designer ?
How to View the generated triggers in the designer ?
Thanks
Sai

Two modules means two forms. These are unrelated.
Or do you mean that you have one form with two blocks (master-detail)?
How to link the two tables data in the designer ?You have to define the foreign key on the tables. Based on this FK Forms Generator will generate the code if you create two Module Components (master-detail) in the module. Don't forget to define the Key Based Link on the master block.
How to View the generated triggers in the designer ?You can't. You have tom open the generated FMB file in Forms Builder to see what code is generated.

Similar Messages

BPC 10.0 NW - Journal data when clearing the data

Hej Gurus,
I have a quite simple question:
When a journal i created and posted in the system, the journal is stored in a specific table for the model, and the data is stored in the cube. What is going to happen with the journals, if we clear the cube for all data, both journal and non-journal data. Will the journals still be posted in the journal table?
The reason is, we have some scattered bad data that we would like to have cleared, and we want to know, if we can delete all data and import everything again without the journal postings are gone.
Best regards,
Mikkel Kristensen

Hi Mikkel
Journal stored in Journal Table along with BP Cube. Any point of time you want to delete due to Bad data. First you have to Unpost Journals that means No Effect in Journals or No Financials update. Then you can clear BPC Cube data.
When you are ready for Journals just simply Post from Unpost Journals. This process will ensure your data integrity.
Otherwise you will have to face again bad data issue.
In Short :
When you decide to Delete Data from Cube:
1. Unpost Journals from Post
2. Delete Data from BPC Cube( from Backend)
3, Re-load Transactional Data
4. Post Journals from Unpost
Hope this will help you
Thanks
Venkat

How to link two text elements to always read the same...

I have an InDesign Doc with a Master Page containing a margin and some graphic imagery that I want displayed on every page.
This works great, so that when I edit the master all other pages are updated.
However, within the master design there is a header that reads the 'Title' of the document, and the 'Version number'
This same information is presented on the front cover page of the document.
What I want to do, is to allow the header to automatically update to whatever is entered in the Front Cover Page text, as this will be the first field completed.
Is this possible?
Many thanks
Max

P Spier wrote:
Thanks, Peter.
The OP didn't indicate anything about a Book, or needing to cross documents, but the extra information is certainly helpful.
I'm not sure I personally trust cross-document cross-refernces all that much, though. There are some reports of them breaking. I might be more inclined, for sake of safety, to repeat the text on page one of each file and use the variable. The text can be in a non-printing frame, if necessary, and that frame need only have some portion inside the bleed area or page boundary if no bleed is specified. The downside to this, of course, is if you edit one, you must edit all, while the cross-reference is a one-shot deal.
My 2-cents addition was added in hopes of saving some frustration for anyone who might want to achieve the result in a book of files.
If x-refs were as robust as they should be, you wouldn't need to mistrust them, of course.
More to the point, err, FrameMaker has global text variables that work across files in a book, so the <$booktitle> text variable, for example, is the same in all component files. You can do this in ID if you post a feature request at AdbeWish.
I'm not sure if placed external text files are more or less reliable than cross-references, but it's worth a try to enable (check) Preferences > File Handling > Links > Create Links When Placing Text and Spreadsheet Files, and place that text file into a master page text frame that applies a desired paragraph style, so that when/if links are updated, the formatting is reapplied.
Global text variables, for those folks who might benefit from them, are certainly worth the time and effort for those folks to file a formal request.
Regards,
Peter Gold

How to link two combo boxes? (urgent)

Hello,
I am wondering how to link two combo boxes in Acrobat Pro 9. Basically, I need to link a building with a list of rooms. There are 3 building choices in my first combo box. For the sake of example, Building A, Building B and Building C. When one of the buildings is selected, I want a 2nd combo box to display the rooms that are located in that building. So by selecting building A, you would then be able to choose a room from the list of available rooms in the second drop box. The buildings cannot share a list of rooms because they have the same room numbers. Is anyone able to help?
- Travis

You can also use ajax. When the first combo box element is selected, it will call the ajax function and that ajax function will bring the data from the database and place it in second combo box.

How to avoid the split problem when uploading the data from csv file

Dear Friends,
              I have to upload data from the .csv file to my custom table , i have found a problem when uploading the data .
i am using the code as below , please suggest me what i have to do in this regard
      SPLIT wa_raw_csv AT ',' INTO
                wa_empdata_csv-status
                 wa_empdata_csv-userid
                 wa_empdata_csv-username
                 wa_empdata_csv-Title
                 wa_empdata_csv-department.
APPEND wa_empdata_csv TO itab.
in the flat file i can see for one of the record for the field Title as
Director, Finance - NAR............there by through my code the wa_empdata_csv-Title is getting splited data as "Director, and Department field is getting Finance - NAR" , i can see that even though " Director, Finance - NAR" is one word it is getting split .
.......which is the problem iam facing.Please could any body let me know how in this case i should handle in my code that this word
"Director,Finance - NAR"   wil not be split into two words.
Thanks & Records
Madhuri

Hi Madhuri,
Best way to avoid such problem is to use TAB delimited file instead of comma separated data. Generally TAB does not appear in data.
If you are generating the file, use tab instead of comma.
If you cannot modify the format of file and data length in file is fixed character, you will need to define the structure and then move data in fixed length structure.
Regards,
Mohaiyuddin

List View: How to force update of *actual* file dates when sort by date?

List View: How do I force and update of actual file dates when sort by date?
When I go in, I often see the sort order and dates from 12-15 hours ago!
not good

Hi, did you ever get that Windows® Sharing thing worked out?
On this problem, If it's just that you need the Finder to wake up to the fact that it needs to update the window give a try with Refresh Finder - 1.3...
http://www.versiontracker.com/dyn/moreinfo/macosx/33066

My phone when attached to the charger boots up reaches the password screen, i enter my password and it goes to home screen then shuts itself off and reboots. is my phone possessed or how can i fix it? can i get the data off of it even if the phone is gone

my phone when attached to the charger boots up reaches the password screen, i enter my password and it goes to home screen then shuts itself off and reboots. is my phone possessed or how can i fix it? can i get the data off of it even if the phone is not salvageable? thank you so much in advance for your help!

Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download
Then see Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
After you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766
Note. Once the Device is asking to be Restored with iTunes... it is too late to save anything... and you must continue with the Recovery...

How to maintain Data availability in Oracle 10g RAC when LOADING the data?

Hi
we are having Oracle 10g server on Sun Solaris(64 bit) with 8 GB RAM.
We are in need of moving the database to "Oracle 10g RAC". (Real Application Clusters)
Our doubt is when loading the data into RAC server, will it affect the application?
coz' we heared that RAC server should be down when we load the data.
Is this correct?
If yes, then How to maintain High data availability when we load the data in RAC server?? Please help me.
Thanks.

First, is this the same question that a colleague of yours posted in this thread?
Data Load in RAC
Second, are other sessions querying the table that you're loading data into? If so, how are you loading the data?
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

Error when updating the data from DSO to cube

Hi,
I am getting the error when uploading the data from the ods to cube.
The following is the error message.
Unable to determine period for date 20090101, fiscal year variant Z2: Error #
How can i solve this issue.
Regards
Annie

Hi ,
fiscal year variant, go into Customizing for Financial Accounting (FI) under Financial Accounting Global Settings >>>Fiscal Year >>>Maintain Fiscal Year Variant.
check this link ..
http://help.sap.com/saphelp_scm41/helpdata/en/50/0d89f2ad919c40b95b9ae7583c8c96/frameset.htm
http://help.sap.com/saphelp_scm41/helpdata/en/50/0d89f2ad919c40b95b9ae7583c8c96/content.htm
Regards,
shikha

I scanned an old photo but the date displayed is today, I want the date to be the date the photo was taken. How do I change the date of the photo in iPhoto 11?

I scanned an old photo but the date displayed is today, I want the date to be the date the photo was taken. How do I change the date of the photo in iPhoto 11?

There are two kinds of metadata involved when you consider jpeg or other image file.
One is the file data. This is what the Finder shows. This tells you nothing about the contents of the file, just the File itself.
The problem with File metadata is that it can easily change as the file is moved from place to place or exported, e-mailed, uploaded etc.
Photographs have also got both Exif and IPTC metadata. The date and time that your camera snapped the Photograph is recorded in the Exif metadata. Regardless if what the file date says, this is the actual time recorded by the camera.
Photo applications like iPhoto, Aperture, Lightroom, Picasa, Photoshop etc get their date and time from the Exif metadata.
When you export from iPhoto to the Finder new file is created containing your Photo (and its Exif). The File date is - quite accurately - reported as the date of Export.
However, the Photo Date doesn't change.
The problem is that the Finder doesn't work with Exif.
So, your photo has the correct date, and so does the file, but they are different things. To sort on the Photo date you'll need to use a photo app.

I backed up files onto an external hard rive form my old PC. Now I want to retrieve the files to put on my mac but it is telling me to format it to Mac. How can I do this without erasing all of the data on my hard drive?

I backed up files onto an external hard rive form my old PC. Now I want to retrieve the files to put on my mac but it is telling me to format it to Mac. How can I do this without erasing all of the data on my hard drive?

Your drive was used with a PC and formatted NTFS which is proprietary Microsoft format.
You need to install a third party program that will read the NTFS format.
There is various software from PARAGON, Tuxera and NTFS-3G
When you get the data off and have verified it to be good, reformat the drive either HFS+ for Mac use only, or for Mac and PC use then MSDOS (FAT32) for under 4GB files (best) or exFAT (for larger than 4GB files) is proprietary and Microsoft is appling for a patent, which would likely mean OS X won't be allowed to read it anymore without a licensing fee and you'l have to pay another third party software company to read the format, just like NTFS is.
The less you have to rely upon third party sources to read your drives the better, this way if you have a issue and need to read the drive on another machine you don't need the software, and a internet connection and a credit card and...and...and...

'Error 8 occurred when starting the data extraction program'

Hello Experts,
I am trying to pull master data (Full upload) for a attribute. I am getting an error on BW side i.e. 'The error occurred in Service API .'
So I checked in Source system and found that the an IDOC processing failure has occurred. The failure shows 'Error 8 occurred when starting the data extraction program'.
But when I check the extractor through RSA3, it looks fine.
Can someone inform what might be the reason of the failure for IDOC processing and how can this be avoided in future. Because the same problem kept occurring later as well.
Thanks
Regards,
KP

Hi,
Chk the idocs from SM58 of source system are processing fine into ur target system(BI system)...?
Chk thru Sm58 and give all * and target destination as ur BI system and execute and chk any entries pending there?
rgds,
Edited by: Krishna Rao on May 6, 2009 3:22 PM

KP06 Cost Center Budget Planning System error when locking the data records

Hi,
While updating Cost Center Planning system(KP06) its giving the below error:
System error when locking the data records.
Message no. KI502
Diagnosis
The lock to protect the data records being processed could not be set. The
probable reason for this is that the SAP locking table is full and no more
entries can be added.
Procedure
Inform your system administrator immediately
No planning data has been changed
Message no. K8038
Diagnosis
You used Post. While preparing the data for posting, the SAP System
determined that no changes were made in the available databank values.
System Response
A posting activity price is not necessary
Please help me how can we rectify the above error..
Thanks
VS Rao

Hi,
check the locking entries (t-code SM12).
http://help.sap.com/saphelp_erp2004/helpdata/en/37/a2e3ae344411d3acb00000e83539c3/frameset.htm
Best regards, Christian

Error 7 occurred when generating the data transfer program

Hello All ,
In Master Data Load Process Chain , we get error like
1. System Response
Caller 09 contains an error message.
Diagnosis
Error 7 occurred when generating the data transfer program for the requested InfoSource.
System Response
The data transfer is terminated.
Procedure
Check the SAP Support Portal for the appropriate Notes and create a customer message if necessary.
Note : We faced this issue for two days now . Just repeating the load make it success .
If any one faced and fixed this issue . Please let me know .
Thanks in advance .

Hi,
. Initially goto transaction SE38, Run the program RSDS_DATASOURCE_ACTIVATE_ALL. Give your Datasource name, and source system and check the check box for "Only Inactive objects".
This will actiavate the given datasource.
2. Replicate the datasource in RSA1.
3. Try to schedule the infopackage for the datasource which you have activated now.
4. IF infopackage runs through, Repeat the process for all datasources ie uncheck the check box, which means it will activate all datasources for the source system.
Also make sure that there will be enough Back Ground Processor available....
Reduce the parallel process
Thanks
BVR

When is the data gobbling glitch going to be fixed between iphones

I have used almost 8 GB of data on a 6 GB plan and that plan was put into effect by Verizon because I blew through 6 GB. Before for 2 years with two computers and one iphone never went over 1 GB. When is the data gobbling glitch going to be fixed between iphones and wifi hot spots like Verizon 4G?

Apple has not said when they are going to fix it. And tech people at Verizon and ATT don't have a clue as to why it is happening. At least they gave me a credit on the usage. Users on other forums think it is a problem with ios 6 making iphones use up wifi data and it looks as if the wifi 4G device is using up all the data.

How to link two modules of data when querying the data ?

Similar Messages

Maybe you are looking for