KP06 Cost Center Budget Planning System error when locking the data records

Hi,
While updating Cost Center Planning system(KP06) its giving the below error:
System error when locking the data records.
Message no. KI502
Diagnosis
The lock to protect the data records being processed could not be set. The
probable reason for this is that the SAP locking table is full and no more
entries can be added.
Procedure
Inform your system administrator immediately
No planning data has been changed
Message no. K8038
Diagnosis
You used Post. While preparing the data for posting, the SAP System
determined that no changes were made in the available databank values.
System Response
A posting activity price is not necessary
Please help me how can we rectify the above error..
Thanks
VS Rao

Hi,
check the locking entries (t-code SM12).
http://help.sap.com/saphelp_erp2004/helpdata/en/37/a2e3ae344411d3acb00000e83539c3/frameset.htm
Best regards, Christian

Similar Messages

  • Attribute change run fails - "Error when deleting the data record /B05/X.."

    Hello,
    I get the error message "Error when deleting the data record /B05/X.." on doing the change run.
    I have already done RSRV on this objects and found no errors, but still the activation fails.
    please give your suggestions ASAP to fix the issue as it is on production system.
    Thanks.

    Attribute change run could fails due to 2 reasons-
    (1) attribute xchange run is already runnnig for any toher object(monitor lock) (check by thi prog-RSDDS_CHANGERUN_MONITOR)
    (2) data is loading deleting from the object on which attribut changerun is running.(go in a manage tab and check)
    check this two conditions and rerun the attribute changrun again from program - RSDDS_AGGREGATES_MAINTAIN and give the master data name in the selection.
    Hope it helps you.

  • Getting Cost Center Does not exist error when executing BAPI_ACC_GL_POSTING

    Hi Champs,
    I am getting Cost Center Does not exist error when executing BAPI_ACC_GL_POSTING_CHECK.
    But when I checked for the particular Cost center, it is mapped to the same company code the program has got executed.
    Example:
    Cost center 1000/150402 does not exist on 17.11.2009.
    Cost center 1000/150402 does not exist
    Cost center 1000/150402 does not exist on 17.11.2009.
    Cost center 1000/150402 does not exist on 17.11.2009.
    Please let me know if you have any guess on this. It is very critical issue for me.
    Thanks for all your help in advance.
    With Best Regards,
    Ravi kanth Yechuri

    Use 0000150402 not 150402 .
    Rob

  • Error when updating the data from DSO to cube

    Hi,
    I am getting the error when uploading the data from the ods to cube.
    The following is the error message.
    Unable to determine period for date 20090101, fiscal year variant Z2: Error #
    How can i solve this issue.
    Regards
    Annie

    Hi ,
    fiscal year variant, go into Customizing for Financial Accounting (FI) under Financial Accounting Global Settings >>>Fiscal Year >>>Maintain Fiscal Year Variant.
    check this link ..
    http://help.sap.com/saphelp_scm41/helpdata/en/50/0d89f2ad919c40b95b9ae7583c8c96/frameset.htm
    http://help.sap.com/saphelp_scm41/helpdata/en/50/0d89f2ad919c40b95b9ae7583c8c96/content.htm
    Regards,
    shikha

  • While processing ALEAUD - "Error when locking the audit statistics"

    Hello,
    I am sending out IDOC for HR data and then prcessing ALEAUD inbound idoc immediatley (setting is done in WE21 partner profiles).
    While processing these incomming idocs, I am getting this error "Error when locking the audit statistics for P01LOGSYS1 IMTIMEDEP HRMD_A" for few idocs. e.g. out of 1000 for 100 idocs this error will happen and IDOC goes to status 51.
    If I try to process thes idocs ALEAUD using background processing and if I schedule 2 jobs at a time then I will get same error and IDOC goes to status 51.
    Can someone help me out?

    Hi
    I tried processing the idocs in background processing as you have suggested using program RBDAPP01 (inbound).
    There are 2 options in this program serial processing and parallel processing. When I select serial processing everyhting goes smooth but it takes long time. But when I select parallel processing I get same locking error mentioned above and only few idocs will get processed successfully with status 53 and all other will error out with status 51.
    If I schedule 2  different jobs in background program RBDAPP01 (inbound) using serial processing then same thing will happen.  only few idocs will get processed successfully with status 53 and all other will error out with status 51.
    And I will get locking error ....
    Note 1333417 says, " these IDocs will be processed via background runs of report RBDAPP01 \ RSEOUT00 (using background work processes) in batch mode leaving dialog work processes free for users and mission-critical processes. Hence you will not encounter the resources problems you are currently experiencing. The only other option would be to try increasing the number of available dialog work processes. The number of dialog processes must be greater than or equal to the total of the number of update and background processes per application server and must be configured across all operation mode
    switches (see SAP note 74141). *However when there are a large number of IDocs being processed this is not a practical solution."*
    Does that mean there is no possoble solution for this issue. If I increase dialog work processes will it be helpfull ?

  • Error when Activating the data store object

    Hi All,
    I have to get the following below errors when i was activating the ods.
    Transfer structure prefix for source systemt T90CLNT is not defined
    Error when creating the export datasource and dependent objects
    could anyone help me on this issue.
    Regards,
    Naveen.
    Edited by: naveen naveen on Feb 2, 2009 6:35 AM

    Hi Naveen,
    Check the Source System connection and Run program RS_TRANSTRU_ACTIAVATE_ALL in SE38 and give your Source system ID and Infosource. If you have infosource. or replicate your datasource.
    and also Check the BW self System whether it is active or not. then try activating DSO
    hope this helps
    Regards,
    Daya Sagar
    Edited by: Daya Sagar on Feb 2, 2009 11:13 AM

  • Error when reading the data of infoprovider

    Hello,
    I have a problem when excecuting the transaction 'listcube' on a specific infocube. It occurs an error message which complains problem when reading the data of the infoprovider. The message text sounds as follows:
    Error reading the data of InfoProvider ZDPPTGR1
    Message no. DBMAN305
    Diagnosis
    Errors occurred while reading a VirtualProvider outside the BI system. Check whether the previous error messages contain any information about the possible cause of this error.
    It is possible that the error message cannot be displayed because the error message class does not exist in the BI system. If this is the case, only the name of the error class and the message number are displayed. View the error message text in the specified error class in the source system of the VirtualProvider.
    Procedure
    Since the error is not necessarily in the BI system, there is no specific procedure for resolving it. With VirtualProviders, problems often occur with the connection to the remote system; these can lead to system termination. If the code for the VirtualProvider is not from SAP, contact the relevant contact person to help resolve the issue.
    If an SQL error is listed in the previous message, see the procedure for SQL errors.
    Has anybody experience with solving this problem? It sounds like a bigger problem - can somebody confirm this? Or is it a problem which is easy to solve?
    Thanks for answering!
    Kind regards
    Heinz

    Hi,
    Please follow the below threads. They are similar to the error you are facing and they may help you with the issue ::
    Remote cube - uncaught exception
    DBMAN350 Error reading MultiCube data over aggregate
    Error reading the data of InfoProvider 0TCT_VC01
    Regards,
    Arpit

  • Error when loading the data from PSA to ODS......

    Hi BW guru's,
    i am facing one problem while loading the data from PSA to ODS.so please help me in this regard.
    Please give a step by step guidelines for me...
    the error while loading the data from PSA to ODS is "There are no PSA tables for these selection criteria","An error occurred when reading PSA data".
    thanks in advance,
    ashok.

    hi ashok,
    u can push data from  psa to ods, for this goto the psa in rsa1>psa>goto that request>rightclick>select " schedule update Immediately ", then data will moved from psa to ods.
                                                 or
    In ods > delete the failed request>goto the processing tab-->select 3rd option   " psa and then subsequentially to data targets ", --> schedule the infopackage.
    bye
    sunil

  • Abort system error when opening the BEx query

    When runing the Bex query I get this error
    ' SQL Error 1578  - Abort system error in program SAPLRRKO and form RSRDR;SRRK0F30_01_'
      Diagnosis: Internal error is a targetted termination since the program has an incorrect status.
    Please advice me how to correct this issue.
    Thanks in advance.
    Taj

    Hey,
    Thanks for your answer , I assigned a  points to you. still I need more info on this then what to do further.If this was caused due to program error then what I have to do.
    Version: 3.50, Package :SAPak35012 .
    Please let me know is this something basis needs to take care of this? .
      Looking forward to hear from you.
    Taj
    Message was edited by: Tamkris Taj
    Message was edited by: Tamkris Taj

  • RSA7 Delta Quere error when reading the data

    I am working on BW3.5
    I have six datas sources which extracts data from R/3 to BW
    one of the datasource is failed. when checked RSA7, selected the failed datasource and executed, throws the short dump error.
    I have analysed the error.
    The shortdump is creating when it is reading data from the datasource.
    There is a problem in the standard RFC table TRFCQOUT and ARFCSSTATE.
    The table TRFCQOUT has one record for Payment for the ARFCTIME which is missing in the ARFCSSTATE table.
    The table ARFCSSTATE has no record for the payment
    When extracting data for the payment data source short dump error is thrown because of mismatch entries in both the tables.
    Kindly let me know what exactly the tables are taken into account when the data is moved from R/3 to BW
    I think if the data can be deleted from the TRFCQOUT table then if will go fine but I am sure what could be implications
    Kindly let me know how best I can resolve the issue.

    Hello Pavan ,
    You can delete the Records from Deleted from TRFC* and the load will be fine BUT you are not suppose to do that, this simply would mean that we have lost the record , hence this is not advisable.
    Instead check and analyse the record there to see if :
    1.The record is an old one hence not useful anymore
    2.The record has correct values that are suppsoed to be
    If the record seems to be obviously redundant or useless we can delete it , else the correction should eb done on the source system side.
    Regards,
    Tapish

  • Flow For Cost Center Budget

    Hi,
      i need to configure the cost center budget scenario.can anydbody provide me the details on cost center budget...process..points will be assigned.
    Thanks
    Sap Guru
    (He Know's Nothing)

    hai,
    KPZ2 is cost center budget here you can give the budget value based on cost center. KP06 is planned value, here you can give cost center wise and GL wise.
    govind.

  • Error when generating the update program RSAU484

    Hi,
    I am getting the following error while loading data into customer master  from CRM system
    Error when generating the update program
    Message no. RSAU484
    Diagnosis
    An error occurred during program generation for InfoSource MR_CDB_CUST_HFR and InfoProvider 0BPARTNER$T. This may be extrapolated to incorrect update rules.
    Procedure
    Check and correct your update rules and then generate the update program again. You can find help on the error in the error log.

    Yes,there is just a single line of code in the start routine
    DELETE DATA_PACKAGE WHERE CUSTOMER is initial.
    and update rules  for Business partner and customer market which are object mapped 1:1. No routines or formulaes.
    Could this be a technical issue on the flexible update or a data quality ?

  • Issue related with the Date Format --- error when activating the DSO

    Hi Friends..
    plz help me to fix the issue ...im getting when activating the DSO...
    Actually im not getting error when loading the data thru DTP..im facing this issue while activating the DSO..
    is there any routine to solve this or i have to go for data selection in info package ......
    I have searched in the forum also..but im not able to fix..plz help
    Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0CRMPOSTDAT*
      Value '31122009' of characteristic 0DATE is not plausible
    Error when assigning SID: Action VAL_SID_CONVERT, InfoObject ZKITRDT*
      Value '01/20/20' of characteristic 0DATE is not a number with 000008 spaces
    Error when assigning SID: Action VAL_SID_CONVERT, InfoObject ZMNS_DATE*
      Value '20101502' of characteristic 0DATE is not plausible
    Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0CRM_EXCDAT*
      Value '31122009' of characteristic 0DATE is not plausible
    Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0CRM_PRIDAT*
      Value '31122009' of characteristic 0DATE is not plausible
    Error when assigning SID: Action VAL_SID_CONVERT, InfoObject ZCOMPDAT*
      Value '31122009' of characteristic 0DATE is not plausible
    Error when assigning SID: Action VAL_SID_CONVERT, InfoObject ZDUEDAT*
      Value '20101402' of characteristic 0DATE is not plausible
    Thanks
    Baskar
    Edited by: tjgnanabaskar on Aug 6, 2010 5:35 PM

    Hi Friends..
    plz help me to fix the issue ...im getting when activating the DSO...Actually im not getting error when loading the data thru DTP..im facing this issue while activating the DSO..is there any routine to solve this or i have to go for data selection in info package ......I have searched in the forum also..but im not able to fix..plz help
    Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0CRMPOSTDAT
    Value '31122009' of characteristic 0DATE is not plausible
    Error when assigning SID: Action VAL_SID_CONVERT, InfoObject ZKITRDT
    Value '01/20/20' of characteristic 0DATE is not a number with 000008 spaces
    Error when assigning SID: Action VAL_SID_CONVERT, InfoObject ZMNS_DATE
    Value '20101502' of characteristic 0DATE is not plausible
    Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0CRM_EXCDAT
    Value '31122009' of characteristic 0DATE is not plausible
    Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0CRM_PRIDAT
    Value '31122009' of characteristic 0DATE is not plausible
    Error when assigning SID: Action VAL_SID_CONVERT, InfoObject ZCOMPDAT
    Value '31122009' of characteristic 0DATE is not plausible
    Thanks
    Baskar

  • Cost Center Budget-Cost element wise

    Dear SAP Gurus,
    My client needs to create cost center budgets cost element wise. For e.g. Salary paid (code 430000) in Development Cost center (code 9901).
    We now use KPZ2 to create cost center budgets and KP06 for cost element planning. Kindly guide.
    Regards,
    Siva

    Hi Ramesh,
    Thank you for the reply. I did suggest them to use KP06 but they require some sort of validation when posting an expense (cost element) to and cost center.
    For e.g. If the travel budget for Marketing cost center is $1000, they need the system to prevent posting once that amount is exceeded.
    Any help in this regard would be appreciated.
    Regards,
    Siva

  • Too many objects in overview screen- Cost center budget

    Hey Guys
    I am trying to upload cost center budget with help of form based kp06. The system throws error that i cannot post more than 9999 cells at one time. is there a any workaround this?
    Thanks
    Ankur

    Hi Ankur,
    the upload is limited to 9999 cells, so you could create your layout which excludes the unnecessary cells. That would give you some more lines to upload.
    The other real option is to either upload the budget with an LSMW or get a program in place which loads it with a liitle bit more comfort.

Maybe you are looking for