u can reach vbrp vbeln from vbrk vbeln
and to get vbrk vbeln from vbak vbeln
goto table VBFA
1.
GIVE VBFA-VBELV = VBAK-VBELN
and
VBFA-VBTYP_N = 'M'. "INVOICE IN CAPS
AND F8
THIS WILL GIVE U VBRK-VBELN .
NOW U CAN USE VBRK-VBELN TO FETCH VBRP
SIMILARLY
2.
IF U WANT TO PICK DELIVERY NUMBER FROM LIKP USING VBAK-VBELN.
SAME PPROCEDURE
PUT VBFA -VBELV = VBAK-VBELN
VBFA-VBTYP_N = ' J'. "IN CAPS
WILL FETCH U LIKP-VBELN "DELIVERY
USE THIS TO GET LIPS ENTRIES
hope this helps
regards,
vijay

Similar Messages

How to link EKBE and MKPF tables

HI all
plz help me,
how to link EKBE and MKPF tables
thanks
ramesh redddy

HI,
EKPO-EBELN = EKKO-EBELN has Purchase Documnet no.
MSEG=MBLNR = MKPF-MBLNR has material document no
Link MSEG-EBELN = EKPO-EBELN ( MSEG purchase prder no and EKPO purhcase document no.)
and you should have to add one more table MSEG which is provide three table.
check this link
EKPO-EBELN = EKKO-EBELN
MSEG-EBELN = EKPO-EBELN
MSEG=MBLNR = MKPF-MBLNR
regards,
PK.

How to link T001 AND T001W Tables

Hi Experts,
I have t001-burks, how do i get t001w-werks, I need link between two tables.
Thanks,
mahe

You can access T001K by BUKRS. Take T001K-BWKEY and with it you can read T001W with T001W-BWKEY = T001K-BWKEY. Then you can take T001W-WERKS.
Note: With this method you can obtain more than one WERKS for one BUKRS.
Hope it helps!
Edited by: Gastón Jareño on Aug 6, 2010 1:32 PM

How to update the VBFA table without entries in VBRK and VBRP tables

Hello,
I have a requirement , where the sales order , delivery happens in one SAP system say X system and billing document wil happens in other sap system say Y.
Now in this particular case , if the user want to know the billing document number in X system. what would be the solution.
Is there any possibility to update the VBFA table with invoice number of Y system (without updating the VBRK and VBRP tables).
User want to see the billing doc number from sales order in the form of document flow in X system
Thanks in advance
Pradeep

Hii
Without updating VBRK/VBRP table and updating VBFA is not possible, So you have to play with work arround to create one Z TABLE, so whenever system Y will create billing document with the reference of System X data you have to update Ztable with Invoice number created in System Y, The primary key will be in Z TABLE is Delivery document number to track one to one with billing doc.
Thanks and Regards
Shambhu Sarkar

How to link parent and child relation in Metapedia

How to link parent and child relation in Metapedia

Vamsi,
Did you every determine how to do what you were asking about? Where you thinking of how to link a parent term to a child term (i.e. like a related term) or was this about linking a term to a different metadata object (e.g. table or report) ?

How can I copy and paste table cells from Pages into InDesign with minimum reformating?

How can I copy and paste table cells from Pages into InDesign with minimum reformating?

Do you mean you want to retain the formatting from Pages, or retain formatting already applied in ID?

Linking PO and AP tables

Hi Gurus,
Please help me in linking PO and AP tables for scenarios like to get the fully/ partially invoiced PO receipts.
Thanks in advance
Avinash

Hi, you can link AP and PO tables in this way: please consider for the AP side table AP_INVOICE_DISTRIBUTIONS_ALL, where you will find all Invoices' distributions. In this table there is a field called PO_DISTRIBUTION_ID that is the right link to PO.
Hope this helps
Regards
Riccardo

How to access RT and CRT tables

Hi experts can any one guide me how to view RT and CRT Tables.
How to access RT and CRT tables.
Is there any Tcode existing to access these.
Thanks in advance
Regards
vamsi.

Hi Vamsi,
1) You can use the function module : CU_READ_RGDIR
In this function module you can pass PERNR and you can get SEQNR(Sequence No) or you can take the sequence no from any transparent table also.
2)After getting the sequence NO Pass the employee NO and Sequence NO in the function module : PYXX_READ_PAYROLL_RESULT.
From this function module you can get the RT,BTand CRT Table results.
Thanks and Regards
Partha

OBJNR is blank at VBAK and VBAP tables

Dear collegues,
There´s a strange situation on customer´s system. When end-user create a new quotation, the OBJNR field at VBAK and VBAP tables doesn´t fill itself, it remains blank. I believed that the field was filled when the document was saved. What´s wrong?
Regards, Otávio.

Hi,
This might be due to many reasons.Please check if there any dumps related to it in ST22/SM21.
Also check if there any enough dialog/bckg work process to process the job.
filling up takes more time depending on the no of records in the application tables.
regards
Nagaraju

"How to sum FKIMG in VBRK and VBRP Table with sample output

Sir\Mam\Gurus ;
I hardly found it difficult in resolving my program in getting the sum of FKIMG inside the VBRP and VBRK tables
The scenario is that i have one Sales Order with multiple invoices . What i need to do is to sum up the fkimg or the quanitity of specific material regardless of how many invoices the material have in a particular SO
Example I have Sales Order number 35678952 with
3 invoices
Invoice # 123 with material number mat1=12, mat2=5 , mat3=7
345 with material number mat1=7, mat2=7
678 with material number mat1=5, mat3=10
Output shoud be
salesorder# 35678952
mat1 = 24
mat2 = 12
mat3 = 17
Below is my Sample Codes:
DATA : it_vbrp_details TYPE STANDARD TABLE OF wa_vbrp_details,
ls_vbrp_details TYPE wa_vbrp_details,
ls_vbrp_details1 TYPE wa_vbrp_details,
lsfinal_vbrp_details TYPE wa_vbrp_details,
it2_vbrp_details TYPE STANDARD TABLE OF wa2_vbrp_details,
ls2_vbrp_details TYPE wa2_vbrp_details,
it3_vbrp_details TYPE STANDARD TABLE OF wa_vbrp_details,
itfinal1_vbrp_details TYPE STANDARD TABLE OF wa_vbrp_details,
itfinal2_vbrp_details TYPE STANDARD TABLE OF wa_vbrp_details,
itfinal3_vbrp_details TYPE STANDARD TABLE OF wa_vbrp_details,
ls3_vbrp_details TYPE wa_vbrp_details,
rtime1 TYPE i,
rtime2 TYPE i,
rtime3 TYPE i,
s_erdate type d,
scr_erdat type d,
s_erdate = scr_erdat.
CALL FUNCTION 'MONTH_PLUS_DETERMINE'
EXPORTING
months = 1 " Negative to subtract from old date, positive to add
olddate = s_erdate
IMPORTING
newdate = new_date.
""" This is another way manual adding by days
CALL FUNCTION 'CALCULATE_DATE'
EXPORTING
days = +30
start_date = s_erdate
IMPORTING
result_date = new_date.
result_date = ddate.
REFRESH: it_vbrp_details.
SELECT
vbrp~matnr
vbrp~aubel
vbrp~aupos
vbrp~vbeln
vbrp~kzwi1
vbrp~kzwi2
vbrp~kzwi3
vbrp~kzwi4
vbrp~kzwi5
vbrp~kzwi6
vbrp~mvgr1
vbrp~mvgr2
vbrp~mvgr3
vbrp~mvgr4
vbrp~mvgr5
vbrp~knuma_pi
vbrp~knuma_ag
vbrp~mwsbp
vbrp~vkaus
vbrp~fkimg
vbrk~vbeln
vbrk~fkart
vbrk~belnr
vbrk~xblnr
vbrk~vbtyp
vbrk~kunag
vbrk~fksto
vbap~posnr
INTO TABLE it_vbrp_details
FROM vbrp INNER JOIN vbrk ON vbrkvbeln EQ vbrpvbeln
where vbeln eq gt_data-vbeln
where vbrpaubel eq vbapvbeln
WHERE vbrp~posnr GE ''
AND vbrk~vbtyp EQ 'M'
AND vbrk~fksto NE 'X'
AND ( vbrperdat GE s_erdate OR vbrperdat LE new_date OR vbrp~erdat IN s_erdat ) " + JP 09 19 2011 Additional Optimization
ORDER BY aubel aupos .
ORDER BY aubel aupos matnr.
"""" This where i need your help Sir\Mam\Gurus
it3_vbrp_details = it_vbrp_details.
SORT it3_vbrp_details BY aubel matnr fkimg kzwi1 kzwi2 kzwi3 kzwi4 kzwi5 kzwi6 aupos vbeln
mvgr1 mvgr2 mvgr3 mvgr4 mvgr5 knuma_pi knuma_ag mwsbp vkaus fkart belnr vbtyp kunag fksto.
LOOP AT it3_vbrp_details INTO ls_vbrp_details.
COLLECT ls_vbrp_details INTO itfinal1_vbrp_details.
APPEND ls_vbrp_details TO it_vbrp_details.
ENDLOOP.
kzwi1,kzwi2,kzwi3 is also been sum up
Sir the output is something like this
Sales Ord# Material Qty KWIZ1 KWIZ2 KWIZ3 MGVR1 VBELN
1234       Mat1     24 23.2 22    12           LastInvoice#
1234       Mat2     12 20.0 21    15           LastInvoice#
1234       Mat3     37 22.0 22    16           LastInvoice#
5432       Mat1     30 25.0 23    15           LastInvoice#
5432       Mat2     24 22.0 24    23           LastInvoice#
5432       Mat3     20 18.0 20    12           LastInvoice#
Hope you can help me as i cant hardy sleep thinking of this ...
I will really appreciate your great help..
Thanks !
I will really appreciate your great help..
Thanks !
Moderator message: duplicate post locked.
Edited by: Thomas Zloch on Sep 20, 2011 3:05 PM

Hi,
How you want to display the output?..
If you want to display the output as mentioned below, then you have to use nested loop & dynamic field assignments to get result.
Output column
sales order     Mat1 Mat2 Mat3 ......
1234               24    12     37
Kindly let me know, if you have any questions
Regards,
S.Senthilkumar

SAP Query error for VBAK and KONV tables

Dear Experts,
Want to create SAP Query for below requirement but faced some error
Step1) Extract the data from VBAK table w.r.t. order type , Sale org and date range
and collected the Sales order numbers and doc. condition record (KNUMV)
Step 2)In table KONV (Transactional condition record data) in this table provided input as doc. condition record (KNUMV) with respect to condition type ABCD
Manually i extracted data, there is no problem .
But customer want to generate SAP Query for above requirement
I tried to create but in t.code SQ02 when i tried to join the table VBAK and KONV i faced the below error
Table KONV cannot be used in a join.
How can I create SAP query for above requirement ???
if its not possible then create Z report is the only solution ??????
Thanks in advance

Hello
You can not create Query report with joining KONV. But there is one solution for your problem. You can create Query report by using Database VAV. In this logical database you will find all SD tables and also KONV. Use only those tables and fields which you want in your query report. I have checked this and its working
Please try this and update the forum accordingly.
Edited by: moazzamjii on Jun 30, 2011 12:13 PM

How to filter parent and child tables data in impdp?

Hi Friends,
i hope everyone doing good..
I have two tables in my schema like below.
STUDENT_DTLS:-
SID Sname CID
1     venkat     001
2     uppy     002
3     deepu     003
4     trinath     003
5     naveen     004
6     ramesh     005
COURSE_DTLS:-
CID CNAME Fee
001     Oracle     2000
002     java     6000
003     sieble     4000
004     informatica     3000
005     obiee 4000
if I load only few Student details say sid=1,2,3 into another environment using impdp,corresponding to those students course details from COURSE_DTLS table only need to be loaded.Not all course details.
Iam Expecting Result in new schema as below:-
SID Sname CID
1     venkat     001
2     uppy     002
3     deepu     003
CID CNAME Fee
001     Oracle     2000
002     java     6000
003     sieble     4000
But when i am using the below import scrit,The COURSE_DTLS is loading first and its query option(select cid from STUDENT_DTLS) is returning no rows.Because at that time no data is insertred into STUDENT_DTLS yet.
secondly it is importing data into STUDENT_DTLS with query option where sid=in (1,2,3) which is loaded propelry.
Thirdly it is trying to enable primary key and Foreign key constraints which is also failing because of no data in COURSE_DTLS table.
i have changed the order of tables in TABLES clause like tables=COURSE_DTLS ,STUDENT_DTLS.But still COURSE_DTLS table is loading first.
impdp pa_data_sub/******* NETWORK_LINK=qdssih30 tables=STUDENT_DTLS,COURSE_DTLS query='STUDENT_DTLS:"where SID IN(1,2,3)"','COURSE_DTLS:"where cid in(select cid from STUDENT_DTLS)"', CONTENT=all table_exists_action=replace directory=DATA_PUMP_DIR logfile=exp_join.log
output:
Total estimation using BLOCKS method: 128 KB
Processing object type TABLE_EXPORT/TABLE/TABLE
. . imported "PA_DATA_SUB"."COURSE_DTLS" 0 rows
. . imported "PA_DATA_SUB"."STUDENT_DTLS" 3 rows
Processing object type TABLE_EXPORT/TABLE/CONSTRAINT/CONSTRAINT
Processing object type TABLE_EXPORT/TABLE/INDEX/STATISTICS/INDEX_STATISTICS
Processing object type TABLE_EXPORT/TABLE/CONSTRAINT/REF_CONSTRAINT
ORA-39083: Object type REF_CONSTRAINT failed to create with error:
ORA-02298: cannot validate (PA_DATA_SUB.SYS_C0040905) - parent keys not found
Failing sql is:
ALTER TABLE "PA_DATA_SUB"."STUDENT_DTLS" ADD FOREIGN KEY ("CID") REFERENCES "PA_DATA_SUB"."COURSE_DTLS" ("CID") ENABLE
Processing object type TABLE_EXPORT/TABLE/STATISTICS/TABLE_STATISTICS
Job "PA_DATA_SUB"."SYS_IMPORT_TABLE_01" completed with 1 error(s) at 17:28:13
Please suggest me how to achieve this task in a single import command?
Is there any option in impdp to prioritize the table to be loaded first?
Thanks,
Venkat Vadlamudi

You can't be guaranteed which order the data will be loaded in, so using a query that examines a table that is being imported is not going to always work the way you want it. The failing constraints makes sense because there is no data.
So, in your case, course_dtls gets imported first and the table student-dtls exists, but it not populated yet, so the select cid from student_dtls comes back with 0 rows. The second query works fine.
You might be able to change the query to be:
'COURSE_DTLS:"where cid in(select cid from STUDENT_DTLS@qdssih30 where SID IN(1,2,3)"'
This way, you query the source table pointed to by the network link and you use the same subquery from the first table.
This should work for you... I think anyway.
Dean

How to identify fact and dimension tables

Hi ,
We are having the list of parent child relation info for each database tables. Based upon the parent child tables ,needs to identify which table is fact ,which table is dimension .Could you please help me how to identify the fact table and dimensions tables ?
Thanks in advance

Hi,
Refer this link........
http://www.oraclebidwh.com/2007/12/fact-dimension-tables-in-obiee/
Please mark if it helps you.......

Link VBAK AND LIPS

Hi Experts,
IS there any link between VBAK and LIPS (VBELN AND VGBEL). Data is flow from header level VBAK to Item level LIPS is correct or Item level to item level.
Regards
Rahul

Dear Rahul1234 ,
You can use the VBAK- VBELN or VBAP-VBELN
Put the same in VBFA as preceding document and fetch subsequent document where subsequent document category is J(delivery)
Now input that list in LIPS to get the required field.
This will work. If your ABAPer is telling that the logic is not correct, then you may demonstrate the same using a query (table join VBAK-VBFA-LIPS)
Thanks & Regards,
Hegal K Charles

Vbrk and Vbrp tables performance problem

Hi all,
The below query is taking lot of time in QAS i need to decrease the time without affecting the logic.....
SELECT vbrk~kunag
       vbkd~bstkd
       vbkd~bstdk
       INTO TABLE c_tab_po FROM vbrp
       INNER JOIN vbrk ON vbrkmandt = vbrpmandt AND vbrk~vbeln =
       vbrp~vbeln
       INNER JOIN vbkd ON vbkdmandt = vbrpmandt AND vbkd~vbeln =
       vbrp~aubel
                          AND vbkd~posnr = con_zposnr
       WHERE vbrp~vbeln EQ nast-objky.
DELETE ADJACENT DUPLICATES FROM c_tab_po COMPARING ALL FIELDS.
*Getting the other Invoices based on the customer PO number
IF c_tab_po[] IS NOT INITIAL.
    SELECT
    vbrk~kunag
    vbkd~bstkd
    vbkd~bstdk
    vbkdposex_e vbrkvkorg
    vbrpvbeln vbrpposnr vbrp~erdat
           vbpakunnr vbrpaubel vbrpaupos vbakerdat
           vbrpmatnr vbrkmwsbk vbrp~netwr
           vbrkvaldt vbrkzterm vbrk~vbtyp
            INTO TABLE g_tab_invoice FROM vbrp
            INNER JOIN vbrk ON vbrkmandt = vbrpmandt AND vbrk~vbeln =
            vbrp~vbeln
            INNER JOIN vbkd ON vbkdmandt = vbrpmandt AND vbkd~vbeln =
            vbrp~aubel
                           AND vbkd~posnr = con_zposnr
            INNER JOIN vbpa ON vbpamandt = vbrpmandt AND vbpa~vbeln =
            vbrp~aubel
                           AND vbpaposnr = con_zposnr AND vbpaparvw =
                           con_parvw
            INNER JOIN vbak ON vbakmandt = vbakmandt AND vbak~vbeln =
            vbrp~aubel
            FOR ALL entries IN c_tab_po
                WHERE vbrk~kunag EQ c_tab_po-kunag AND
                vbkd~bstkd EQ c_tab_po-bstkd AND
                vbkd~bstdk EQ c_tab_po-bstdk.
ENDIF.

Hi Younus,
First join seems to be oku2026
But you are querying Db tables multiple times to avoid this.
Fetch the fields
vbkdposex_e vbrkvkorg
vbrpvbeln vbrpposnr vbrp~erdat
vbrpaubel vbrpaupos
vbrpmatnr vbrkmwsbk vbrp~netwr
vbrkvaldt vbrkzterm vbrk~vbtyp
in the first join itself.
SELECT vbrk~kunag
vbkd~bstkd
vbkd~bstdk
vbkd~posex_e vbrk~vkorg
vbrp~vbeln vbrp~posnr vbrp~erdat
vbrp~aubel vbrp~aupos
vbrp~matnr vbrk~mwsbk vbrp~netwr
vbrk~valdt vbrk~zterm vbrk~vbtyp
INTO TABLE c_tab_po FROM vbrp
INNER JOIN vbrk ON vbrk~mandt = vbrp~mandt AND vbrk~vbeln =
vbrp~vbeln
INNER JOIN vbkd ON vbkd~mandt = vbrp~mandt AND vbkd~vbeln =
vbrp~aubel
AND vbkd~posnr = con_zposnr
WHERE vbrp~vbeln EQ nast-objky.
then Just join VBPA & VBAK and get required data.
Thanks,
Sudha

How to link vbak and vbrp tables

Similar Messages

Maybe you are looking for