How to load Audio/Video in TLF3.

Hi All,
Is audio/video file supported by Flex TLF3 ?
Thanks..

ragedd wrote:
First, I would have to embed a flash player, correct?No. You're just taking ideas from other popular streaming sites. It's certainly not a requirement.
My questions are: How can I have the flash player stream audio to users by downloading it from a java app server, if the user has a session and is logged in, etc? (picture myspace here)The same way you would authenticate any website. Usually a database and a challenge/response. If they're not logged in, then instead of writing out the content, write out a 403 status code (or do something more graceful, such as redirect them to the login page).
Also, how do I measure network traffic in Java? (The flash player of each user will stream the songs, I'd like to know how much bandwith is going around).Just keep track of how much data you send to the OutputStream.

Similar Messages

  • How to create audio, video, and photo in a list view format

    I'm creating a webstire entirely out of Flash using CS5 for a paranormal investigation group. In the past, using a Website Tonight template from GoDaddy had placed either an audio, video, or photograph with text above each item discusssing the content. Now, they would like this type of feature in the Flash website. I'm new to Flash, but seasoned in many other Adobe products ... not that this helps ... much!
    Anyways, the website is looking great aside from this one set back, so I'm hoping someone out there can give me a helping hand. I'm willing to purchase a third-party template, but to incorporate that into our Flash file, seems daunting.
    AUDIO
    We need to load an audio that can play, pause, rewind, loop, and stop at the very least.
    Then have text describing the situation around the audio.
    repeat ... and so forth ...
    New audio will be added to this section every week or so, and all the components need to scroll as the screen fills up. When adding new audio, we would add the new audio and text to the top of the list, pushing the remaining audio files down.
    VIDEO
    We need to load video footage with all the button features needed to play, stop, etc. I have found adding video quite easy, but to get the player to move with the text as the frame it is contained in scrolls down is another story. How do you do that?
    Text describing the video contents will be above or next to the video player.
    repeat ... and so forth ...
    New video will be added to this section every week or so, and all the  components need to scroll as the screen fills up. When adding new video,  we would add the new video and text to the top of the list, pushing the  remaining video files down.
    PHOTOS
    ditto as others
    Thanks!!

    As mentioned, building a custom application can be tricky, especially if you are not very familiar with Flash.
    So you want a Web page with an audio player and selection list at the top (or where ever) and then a video player section, along with its playlist, and then at the bottom of the page you want a photo display area... Is that correct? and the scrolling you mentioned is because the page needs to be long enough to hold all 3 components? is that right?
    Have you instead considered just using 3 different frames, one frame for each component and simple buttons to jump from audio to video to photos?
    Or, skip the scrolling in Flash and let the html/css take care of the scrolling, just like any normal Web page. Just make the .swf as long as needed to display all your content.
    Since you are new at this type of a project, I'd suggest you start small, take the project in steps... just build the audio player... then the video player... then your photo slide show..
    Only after you have 3 working moduals would you but them together into one .fla
    And yes, learn to use xml for ALL the data, audio, video, and photos.... very easy to update without having to re-publish any of the Flash.
    Here is a good source for tutorials:
    http://www.gotoandlearn.com/index.php?currentpage=11
    Flash and xml
    http://www.gotoandlearn.com/index.php?currentpage=13
    learn to use NetStream to play your videos, much more versatile and powerful than using the FLVPlayback component
    But learning how to incorporate xml into your Flash project is very important in a project like this. And then broken down into 3 components, it's really not that tough to build a project like this.
    Best wishes,
    Adninjastrator

  • How to Make Audio Video Broadcasting Programe using JMF

    hi i m newto java programing i wan to know can any one help me out how to transimit audio and video over netwrok from one pc to other computer voer the network . i m using my webcam to transmit video can any one of u email me the code if any one has made such application like this .. my email is [email protected]

    Well you've found the root of your problem. It's not necessary the JMF. It's when you make a jar file, you need to include the dependencies. I don't think it' legal to include the JMF in a program you sell or distribute, so be careful there.
    However, to include dependencies in jar files is not a hard task. The simplest method is to unjar the dependency and place it at the top or your classpath; then make a jar that includes both your program, and the dependency.
    A more long term solution is to use a build system such as ant or maven to create the package using available scripts or plugins. The "Uberjar" plugin for maven comes to mind.
    -vito

  • How to stream audio / video in java?

    Hello.
    I would live to develop a java application (JavaEE, with tomcat or JBoss) that could stream audio / video over the Internet, on a controlled matter.
    First, I would have to embed a flash player, correct? Need suggestions on one, paied or free.
    My questions are: How can I have the flash player stream audio to users by downloading it from a java app server, if the user has a session and is logged in, etc? (picture myspace here)
    Also, how do I measure network traffic in Java? (The flash player of each user will stream the songs, I'd like to know how much bandwith is going around).
    The reason that I'm asking this here is because I have no idea of which forum to ask this.
    I have been a Java app developper for the past five years, so coding won't be a problem, I just don't know which API / Frameworks to turn to.
    Thanks for all your help.
    Regard,
    Carlos.

    ragedd wrote:
    First, I would have to embed a flash player, correct?No. You're just taking ideas from other popular streaming sites. It's certainly not a requirement.
    My questions are: How can I have the flash player stream audio to users by downloading it from a java app server, if the user has a session and is logged in, etc? (picture myspace here)The same way you would authenticate any website. Usually a database and a challenge/response. If they're not logged in, then instead of writing out the content, write out a 403 status code (or do something more graceful, such as redirect them to the login page).
    Also, how do I measure network traffic in Java? (The flash player of each user will stream the songs, I'd like to know how much bandwith is going around).Just keep track of how much data you send to the OutputStream.

  • How to  stream audio/video to real Audio Player

    Hello
    I am planning on doing a project on streaming audio/video onto Real Audio Player . I am very new to JMF . I would appreciate some pointers on how to start off. I ahve read the documents but am not able to get started right .
    I wanted to know the following :
    1. Isnt the RTP streaming streaming for live audio or video ? If I want to stream something which I have stored in my local machine then how do i do it - do i need to use RTP ?
    2. I undertsand that if i need to stream the audio/video file I need to convert it to a format the Real Audio Player supports. How do i go about that ?
    Any help would be greatly appreciated!!!
    Thanks in advance
    Shailaja

    JMF doesn't have any support for Real media. Real has gone open source with their Helix Community, so maybe you could find some useful information there: http://www.helixcommunity.org

  • How to change audio/video speed

    Hi,
    I'm trying to change audio/video playback speed, so I could
    play it faster, but I haven't find any solution.
    It has to be changed dynamicaly - there is no possibilty of
    making normal, fast playing file.
    Thank you
    LN

    If you convert the video into an SWF and embed it playing
    through the frames, you should be able to "skip" frames or pause
    between frames through flex to increase/decrease playback speed
    through the MovieClip.gotoAndStop method.
    Not sure this would work or not. Just a thought.
    Happy coding.

  • How to load windows videos to itouch

    how could i load videos from my windows media player to my itouch .pls help me

    One way is by placing the videos in the Movie category of your iTunes libray and check the box in iTunes that says sync videos.  As roaminggnome said, the videos have to be in a format compatible with the iPod.  See:
    iTunes: Frequently asked questions about viewing and syncing videos

  • How to restore audio video sync in media file

    I captured some clips from my Mini-DV Panasonic PV-GS320. Some clips were in sync but a couple were off. I unlinked audio and video and slid the video later by about 20 frames and it sounded fine. But I need a media source file that I can edit from.
    Is there a way to modify the media file or generate a new media file that is in sync? If I export a new movie is there a specific format I should use?
    I recorded 12 bit audio and imported it at 32 KHz.

    Could the bad ones have been shot at 16bit ?
    No. I recorded them all together in one session. All I did was hit the record button on and off. When I tried to capture the entire 30 minute session it crash at the end when doing some audio processing. So I captured it in 3 clips. The middle clip was in sync and the beginning and end clips were not.
    I actually have two questions:
    1) How can I fix the sync in the broken clips? I have recaptured the clips and get the same out of sync result.
    2) How can I avoid this problem in the future?
    I have recorded and captured several movies using the same gear and SW and never had this problem before.

  • How to import audio/video from DVD into FCP

    Hi, I need to import/capture into FCP from a dvd. When dvd files are open on my Mac it show VOB fotmat for video. I imported those files but they don't have audio, also the total time is 20 minutes but when imported into FCP it shows only bout 25 seconds. can someone help on this matter?
    Thanks in advance

    Cinematize works great. You can select portions or the entire DVD. It will not read encrypted DVD's so assuming you are using media that you have rights to it will do fine.
    You can import in several compressions. If you like you can import only the audio, only the video, etc. It will give you a QT file at the end.
    http://www.miraizon.com/products/products.html

  • How to create audio video chat in shockwave

    I need to create a multi user chat appliation in shockwave
    which will allow text chats, voice chats & video chats. Can
    anyone guide me how to go about with this project? Is there any
    xtras that will help me in getting this done.
    Thanks & Regards
    Kumaran

    The absolute best way to do this is to build a simple web
    service control in Flash and embed it into your director movie as a
    cast member. At least this is how I do it. You can probably find
    the Flash code online for next to nothing.
    Maybe this tutorial will help
    http://www.flash-db.com/services/tutorials/mxclasses/mxwebservices.php

  • How to show audio/video from timeline when I've already ripple deleted

    Is there a way to show on a time line info that I've ripple deleted? that is, for example I clipped too much from the first part of my timeline and I want to put some of that back.

    You haven't destroyed anything by the ripple delete. Just move your clip over and extend the part you still want with your mouse. There are shortcut keys as well, but I don't remember them just now. When you highlight your clip, you should see a handle at the end - just extend it. You may have to zoom into the timeline.

  • . I am new to IPods. I have a Classic 160GB and I can't figure out how to load my music videos to it. I have had no problem loading my music CD's but no go with the music videos I have. Please HELP. Thanks maxsdad

    Hello:
    I am new to IPods. I have a Classic 160GB and I can't figure out how to load Music Videos to iTunes or the IPod. I have had no problem loading my CD's to iTunes and to the IPod, but no go on the Music Videos.
    Please Help
    maxsdad

    B-Rock:
    Ok. Here's the results. I tried all the music videos I wanted to put onto the IPod and the results were:
    I was able to get good results with 2 full length music videos and 2 video singles(only 2 videos on each disk). For a total of 4 videos.
    I was able to encode 5 full length music videos, but the results were distorted (video and audio).
    I was unable to copy 2 full length videos due to error failures. 1 was a "No Title Found" error, the other was a "NAVDAT" error.
    I guess my next question is: Do you know of any other program(s) that I might try, to see if I can get good results with the videos that didn't work with Handbrake?
    Thanks again for all your help.
    maxsdad

  • Load home video clips to ipad

    Hi please advise as to how to load home video clips to ipad.I have a sony hrddisk camcorder.
    Thanks

    Thanks.. I was able to drag a clip from my iphoto onto my movie page in itunes.  Then I selected it when I connected my ipad but it didn't sync.  The other issue is with the keynote.  When in keynote on the ipad the only choice is iphoto to get images.  The video clip needs to be in iphoto, doesn't it in order for me to put it on a slide?

  • How to load videos in the ipod touch via itunes?

    Hello there! My question is the following How to load videos in the ipod touch vis itunes? I try to do it but it shows an error. I dont know what is the type of video that ipod t supports.

    You need to convert videos to iPod Touch format.
    H.264 video up to 720p, 30 frames per second, Main Profile level 3.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats
    MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats
    Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format
    Support for 1024 by 768 pixels with Apple VGA Adapter; 576p and 480p with Apple Component AV Cable; 576i and 480i with Apple Composite AV Cable (cables sold separately)
    After converting the videos use iTunes to Add to Library.
    Once in iTunes, connect and select iPod Touch in iTunes, go to Movies tab and select Sync Movies with your videos selected and click bottom right Sync button.

  • How can I display & split the audio & video from the same digitized clip?

    I digitized a scene into iMovie that I edited on a professional system which I don't have access to anymore. The whole scene is 1 clip. Now I see a few tweaks that I want to make, so I was hoping to do them in iMovie.
    I want to "pull up" the audio in one section - meaning I want to take cut about 20 frames of audio from the end of a shot, and then move all the other audio up to fill the hole. To compensate for the missing 20 frames, I'll cut video off the head of the next shot. Some call this prelapping. Some call it an L-cut. Some call it asymmetrical trimming. Either way, I can't figure out how to do it in iMovie.
    My clip appears in the timeline as one track - a single track that contains the video and 2 audio tracks. How can I display the audio that's tied to the video on its own track? Then I think I could split audio & video wherever I wanted and trim things up - but I can't figure out how to do it.
    Am I asking too much of this software?
    BTW, I never see the option to "Split audio clip at playhead". I'm not displaying clip volume or waveforms. Choosing to display waveforms doesn't show me anything. Maybe iMovie thinks I'd only want to see waveforms of audio that isn't tied to my video-and-audio clips?
    Thanks in advance for any help...

    Jordon,
    "Am I asking too much of this software?"
    No, you're not.
    You first want to select your clip(s) and choose Advanced>Extract Audio.
    This will copy the audio from the video clip and place it on one of the two separate audio tracks while lowering the audio level to zero in the original video track.
    You can now edit and move the audio independently of the video.
    With the audio clip selected, you'll find you now have access to Edit>Split Selected Audio Clip at Playhead.
    Matt

Maybe you are looking for