How To load data in 0COPC_C04 Invntory Cube?

Dear All,
I have one inventory cube 0COPC_C04 with Periodic Ending Inventories (Project Stock 0CO_PC_ACT_04) and Periodic Ending Inventories (Sales Order Stocks 0CO_PC_ACT_03) data sources.
Both data sources have Fullload with fiscal year.
For testing i have loaded data without fiscal year/Period in cube, while report testing with R/3 getting double value.
What is the procedure for loading data in this cube? And any other data sources data required?
Regards
Ramu

Hi ,
For this particular Cube and datasource, SAP recommends that you load the data following period-end closing for the closed period.
You can load the data selectively based on the following characteristics :
Company code
Plant
Material
Price category (only in the case of InfoSources for material prices)
Fiscal year/period
Check the below link for additional information:
http://help.sap.com/saphelp_sm32/helpdata/en/51/7fe767107211d48b390000e83234f3/content.htm
In Fiscal year/period in infopackage you can use this OLAP variable : 0P_PRFP1 to load the data . This OLAP variable will work according to the fiscal year variant you will provide in infopackage .
To view the standard code behind this OLAP variable check the code of this FM : RSVAREXIT_0P_PRFP1.
Hope the above reply was helpful.
Kind Regards,
Ashutosh Singh

Similar Messages

How to load data from a virtual cube with services

Hello all,
we have set up a virtual cube with service and create a BEx report to get the data from an external database. That works fine. The question is now:
Is it some how possible to "load" the data from this virtual cube with service (I know that there are not really data...) into an other InfoCube?
If that is possible, can you please give my some guidance how to set up this scenario.
Thanks in advance
Jürgen

Hi:
I don't have system before me, so try this.
I know it works for Remote Cube.
Right Click on the Cube and Select Generate Export Data Source.
If you can do this successfully, then go to Source Systems tab and select the BW. Here, Right CLick on select Replicate DataSources.
Next, go to InfoSOurces, click on Refresh. Copy the name of Virtual Cube and add 8 as a prefix and search for the infosource.
If you can see it, that means, you can load data from this cube to anywhere you want, just like you do to ODS.
ELSE.
Try and see if you can create an InfoSpoke in Virtual Cube. Tran - RSBO.
Here, you can load to a database table and then, from this table, you can create datasource, etc.
ELSE.
Create query and save it as CSV file and load it anywhere you want. This is more difficult.
Good luck
Ram Chamarthy

How to load data from PSA to CUBE & DSO at a time using DTP in BI 7 ?

HI all,
I am new to BI 7 . How to load the data at same time to DSO & INFO CUBE using DTP.
Please provide me steps to load & plz specify which update mode I have to use ( FULL OR DELTA ) which one is best.
Plz Suggest me.
Thanks & Regards,
Kiran m.
Message was edited by:
kiran manyam

Below are the basic steps which we follow in any BI 2004S system:
1)Create datasource. Here u can set/check the Soucre System fields.
2)Create Transformation for that datasource. (no more update rules/transfer rules)
2.1) While creating transformation for DS it will ask you for data target name, so just assign where u want to update ur data.
DataSource -> Transformation -> Data Target
Now if you want to load data into data target from Source System Datasource:
1) Create infopackage for that data source. If you are creating infopackage for new datasources, it will only allow you update upto PSA, all other options u can see as disabled.
2)Now Create DTP (Data Transfer Process) for that data source.
3) NOw schdule the Infopackage, once the data is loaded to PSA, you can execute your DTP which will load data to data target.
If you are loading data from one one data target to other, no need to use PSA, you can directly execute DTP in that case.
Data Source -> Transformation (IP/DTP) -> Data Target1 -> DTP ->Data Target 2
Use the below link for detailed example:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/fc61e12d-0a01-0010-2883-e2fc63ef729b
Infosources are no more mandatory with BI 7.0, below is the link to scenarios where we use infosources:
http://help.sap.com/saphelp_nw04s/helpdata/en/44/0243dd8ae1603ae10000000a1553f6/content.htm
Full or delta depends on your requirement...
chk the below thread to know better
difference between the various loads
hope it helps
Message was edited by:
sriram viswanathan

How to load data in realtime/transactional cube for BPS

hello all,
I have installed the neccessary cube from business content and all the neccesary content. how do I get data in that real time/transactional cube. SInce we dont have any rules or datasource or anything so its confusing me can someone please help me.
If you have any other imp point to share about this please help.
Thanks in advance

Hi Raj,
Transactional cubes are filled with data using the BPS layouts. They do not require any update rules for this purpose.
However you can also load the data from your source system into this cube and for this you will need to usual Update rules, InfoSource etc. Before loading data you may need to check if the Cube is enabled for Reporting (in RSA1 > right click> Swtich transactional cube.
Hope this helps...

How to load data to a cube from multiple infosources ?

Hi friends,
How to load data to a cube from multiple infosources ? could u please answer this question .
thanks in advance......

Hi ,
say for example you need to load data to 1 cube from 3 info sources:
1) You need to create 3 update rules for the Cube.
2) Each time you create the update rules. Mention the name the name of the Info source. and create update rules correspondingly.
Regards
satish
Message was edited by:
satish murthy

How to load data from a ODS to CUBE Request ID - by - Request ID?

<i>How to load data from a ODS to CUBE Request ID - by - Request ID?</i>
The problem is that... some requests had been eliminated of the cube and the delta control between the ODS and CUBE was lost. The flag "<b>data mart status of request</b>" of all the requests of the ODS had been blank.
Now it is necessary to load some requests from the ODS for the cube.
Notes:
- it is not possible to make a complete load selecting the data to be loaded;
- the PSA is not being used;
- considering the data volume it is impracticable to reload the cube completely.
Thanks in advance,
Wesley.

Dear R B,
Considering the following:
-> the delta control was lost;
-> the data already are active in the ODS;
-> part of the data of the ODS already is in the cube.
The indicated procedure it only guarantees the load of the data that are in the ODS and that are not in the cube.
Tks,
Wesley.

How to Load data in remodeled info provider(Info cube) ?

I have added one key figure in existing cube by using remodeling process.
I changed the transformation rule and reloaded the data but the new key figure is still showing value as 0.
Can anyone please explain complete step by step process of loading data in remodeled info cube.
I am new to SAP BW. please help me to sort out this issue.
thanx

Hi,
After adding the key figure, use one of the following options to populate data.
1. Constant: To populate constant data for new key figure.
2. User Exit: To populate data from different source.
For replacing the key figure, use the following option to populate data.
Customer Exit: To populate data for the replaced key figure.
There is a very nice Blog on this.
/people/mallikarjuna.reddy7/blog/2007/02/06/remodeling-in-nw-bi-2004s
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/008f9fef-22e4-2a10-d994-a17c55ca06f0
Hope this helps.
-Vikram

ERROR : "Exceptions in Substep: Rules" while loading data from DSO to CUBE

Hi All,
I have a scenario like this.
I was loading data from ODS to cube daily. everything was working fine till 2 days before. i added some characteristic fields in my cube while i didn't do any change in my key figures. now i started reloading of data from ODS to cubes. i got the following error "Exceptions in Substep: Rules" after some package of data loaded successfully.
I deleted the added fields from the infocube and then i tried toreload data again but i am facing the same error again "Exceptions in Substep: Rules".
Can any one tell me how to come out from this situation ?
Regards,
Komik Shah

Dear,
Check some related SDN posts:
zDSo Loading Problem
Re: Regarding Data load in cube
Re: Regarding Data load in cube
Re: Error : Exceptions in Substep: Rules
Regards,
Syed Hussain.

Loading data from APO-BW cube into DP planning area

Hello,
Please explain to me how to load data from an infocube within APO into the DP planning area. So far, I generated the data mart, created the update rules for the DP planning area (cube) and replicated data sources. The problem that I am having is that when I create the infopackage, there is no data targets on the data target tab. How can I get the data targets to display? All the other actions appear to be set up correctly (confirmed by BW experts). Can data be loaded from an APO-BW cube directly to the DP planning area cube?
Thanks

Hi James,
Loading of data from an InfoCube to a Planning Area is done using transaction /SAPAPO/TSCUBE (program /SAPAPO/RTSINPUT_CUBE). You just specify the InfoCube, target Planning Area, Selection condition, Infocube Key Figure to PA KF mapping, etc).
Have you tried this transaction already?
Hope this helps.

Step by Step details on how to load data from a flat file

hi can anyone explain how to load data from a flat file. Pls giv me step by step details. thnx

hi sonam.
it is very easy to load data from flat file. whn compared with other extrations methods...
here r the step to load transation data from a flat file.......
step:1 create a Flat File.
step:2 log on to sap bw (t.code : rsa1 or rsa13).
and observe the flat file source system icon. i.e pc icon.
step:3 create required info objects.
3.1: create infoarea
     (infoObjects Under Modeling > infoObjects (root node)-> context menu -
> create infoarea).
3.2: create char /keyfig infoObject Catalog.(select infoArea ---.context menu --->create infoObject catalog).
3.3:   create char.. infoObj and keyFig infoObjects accourding to ur requirement and activate them.
step:4 create infoSource for transaction data and create transfer structure and maintain communication structure...
    4.1: first create a application component.(select InfoSources Under modeling-->infosources<root node>>context menu-->create applic...component)
   4.2: create infoSource for transation data(select appl..comp--.context menu-->create infosource)
>select O flexible update and give info source name..
>continue..
4.4: *IMp* ASSIGN DATASOURCE..
(EXPAND APPLIC ..COMP..>EXPAND YOUR INFOSOURCE>CONTEXT MENU>ASSIGN DATASOURCE.)
>* DATASOURCE *
>O SOURCE SYSTEM: <BROWSE AND CHOOSE YOUR FLAT FILE SOURCE SYSTEM>.(EX:PC ICON).
>CONTINUE.
4.5: DEFINE DATASOURCE/TRANSFER STRUCTURE FOR IN FOSOURCE..
> SELECT TRANSFER STRUCTURE TAB.
>FILL THE INFOOBJECT FILLED WITH THE NECESSARY INFOOBJ IN THE ORDER OR SEQUENCE OF FLAT FILE STRUCTURE.
4.6: ASSIGN TRANSFER RULES.
---> NOW SELECT TRANSFER RULES TAB. AND SELECT PROPOSE TRANSFER RULES SPINDLE LIKE ICON.
(IF DATA TARGET IS ODS -
INCLUDE 0RECORDMODE IN COMMUNICATION STRUCTURE.)
--->ACTIVATE...
STEP:5 CREATE DATATARGET.(INFOCUBE/ODS OBJECT).
5.1: CREATE INFO CUBE.
-->SELECT YOUR INFOAREA>CONTEXT MENU>CREATE INFOCUBE.
5.2: CREATE INFOCUBE STRUCTURE.
---> FILL THE STRUCTURE PANE WILL REQUIRE INFOOBJECTS...(SELECT INFOSOURCE ICON>FIND UR INFOSOURCE >DOUBLE CLICK > SELECT "YES" FOR INFOOBJECT ASSIGNMENT ).
>MAINTAIN ATLEAST ON TIME CHAR.......(EX; 0CALDAY).
5.3:DEFINE AND ASSIGN DIMENSIONS FOR YOUR CHARACTERISTICS..
>ACTIVATE..
STEP:6 CREATE UPDATE RULES FOR INFOCUDE USING INFOSOURCE .
>SELECT UR INFOCUBE >CONTEXT MENU> CREATE UPDATE RULES.
> DATASOURCE
> O INFOSOURCE : _________(U R INFOSOURCE). AND PRESS ENTER KEY.......
>ACTIVATE.....UR UPDATE RULES....
>>>>SEE THE DATA FLOW <<<<<<<<----
STEP:7 SCHEDULE / LOAD DATA..
7.1 CREATE INFOPACKAGE.
--->SELECT INFOSOURCE UNDER MODELING> EXPAND UR APPLIC.. COMP..> EXPAND UR INFOSOURCE..> SELECT UR DATASOURCE ASSIGN MENT ICON....>CONTEXT MENU> CREAE INFOPACKAGE..
>GIVE INFOPACKAGE DISCREPTION............_________
>SELECT YOUR DATA SOURCE.-------> AND PRESS CONTINUE .....
>SELECT EXTERNAL DATA TAB...
> SELECT *CLIENT WORKSTATION oR APPLI SERVER >GIVE FILE NAME > FILE TYPE> DATA SAPARATER>
>SELECT PROCESSING TAB
> PSA AND THEN INTO DATATARGETS....
>DATATARGET TAB.
>O SELECT DATA TARGETS
[ ] UPDATE DATATARGET CHECK BOX.....
--->UPDATE TAB.
O FULL UPDATE...
>SCHEDULE TAB..
>SELECT O START DATA LOAD IMMEDIATELY...
AND SELECT "START" BUTTON........
>>>>>>>>>>
STEP:8 MONITOR DATA
> CHECK DATA IN PSA
CHECK DATA IN DATA TARGETS.....
>>>>>>>>>>> <<<<<<<<<----
I HOPE THIS LL HELP YOU.....

FDM to load data in Essbase ASO cube

Anybody have used FDM to load data in Essbase ASO cube? How do you clear and run calc on ASO cube?
Thanks

Does the Essbase Adapter for FDM Support ASO Cubes? [ID 1168153.1]
Modified 17-AUG-2010 Type HOWTO Status PUBLISHED
Applies to:
Hyperion Financial Data Quality Management - Version: 11.1.1.3.00 and later [Release: 11.1 and later ]
Information in this document applies to any platform.
Goal:
Does the Essbase adapter for FDQM support ASO cubes?
Solution:
ASO cubes are not currently supported in FDQM.
Unpublished Enhancement 6568323 has been created and it is currently under consideration for a future release.
References
BUG:6568323 - 8-529236080 - CUSTOMER WANTS TO TAKE ADVANTAGE OF THE ASO FUNCTIONS IN ESSBASE.
Related
Products
Middleware > Enterprise Performance Management > Financial Data Quality Management > Hyperion Financial Data Quality Management

Job cancelled While loading data from DSO to CUBE using DTP

Hi All,
while i am loading data frm DSO to CUBE the job load is getting cancelled.
in the job overview i got the following messages
SYST: Date 00/01/0000 not expected.
Job cancelled after system exception ERROR_MESSAGE
wt can be the reason for this error as i have successfully loaded data into 2 layers of DSO before loading the data into the CUBE

hi,
Are u loading the flat file to DSO?
then check the data in the PSA in the date field and replace with the correct date.
i think u r using write optimised DSO which is similar to PSA it will take all the data from PSA to DSO.
so clear the data in PSA and then load to DSO and then to CUBE.
If u dont need a date field in CUBE then remove the mapping in transformation in cube and activate and make DTP activate and trigger it it will work.

Unable to load data from DSO to Cube

Good morning all,
I was trying to load data from DSO to Cube for validation. Before loading the new data, I deleted all from DSO and Cube. They contain no request at all. Cube has "Delta Update". First DSO was loaded 138,300 records successfully. Then Activated the DSO. The last when I clicked Exectue (DSO --> Cube), it loaded 0 record. I was able to load the data yesterday. What might be the reasons for this situation?
Thank you so much!

Hi BI User,
For loading delta upload into the data target, there should be an initialization request in the data target with same selection criteria.
So..first do the initialization and perform delta upload into the cube.
Regards,
Subhashini.

DTP load data from DSO to CUBE can't debug

Hi,all expert.
I met a problem yestoday.
When I load data from datasource to DSO,and debug the start routine,it was ok.But when I load data from DSO to CUBE,and debug the routine,it got an error like this:
inconsistent input parameter(parameter:<unknow>,value <unknown>)
message no: RS_EXCEPTION 101.
I don't know why,PLZ help me,thank you very much.

Hi,
An alternative way to do this is to have a small code for infinite loop in your start routine. And when you start the load goto SM50 and debug the process which is executing the load, from there you can close the infinite loop and carry on with the debugging. Please let me know if you require further information.
Thanks,
Arminder

How to load data from a flat file which is there in the application server

HI All,
how to load data from a flat file which is there in the application server..

Hi,
Firstly you will need to place the file(s) in the AL11 path. Then in your infopackage in "Extraction" tab you need to select "Application Server" option. Then you need to specify the path as well as the exact file you want to load by using the browsing button.
If your file name keeps changing on a daily basis i.e. name_ddmmyyyy.csv, then in the Extraction tab you have the option to write an ABAP routine that generates the file name. Here you will need to append sy-datum to "name" and then append ".csv" to generate complete filename.
Please let me know if this is helpful or if you need any more inputs.
Thanks & Regards,
Nishant Tatkar.

How To load data in 0COPC_C04 Invntory Cube?

Similar Messages

Maybe you are looking for