How to load the data in DSO
Hello,
In my BI system ,i have the DSO and InfoCube ,haveing the
infopackage Delta and Init..can any one tell me how to load the data from R/3 in to DSO ,when we have two infopackage(one is delta nad other is Init).Please define brifly.
Hello,
The procedure is as follows.
1) First run the init infopackage (either with or without data), preferably with data.
2) Then run the delta infopackage always. (it will get delta records always).
Now if there are any errors and delta gets faulted, you can delete the init from the init infopackage and run the init infopackage again.
And then schedule the delta.
REgds,
Shashank
Similar Messages
-
Regarding Loading the data from DSO to cube.
Hello Experts,
I have DSO which loads data from psa using 7.0 tranformation (using DTP). And i have a cube which loads the data from that DSO using 3.x transfer rules. Now i have deleted the init request for a infopack before load the data into DSO. But when i load the data from DSO to cube by right click on DSO -> click On Additional Functions -> update the 3.x data to targets, It is giving me an error like 'Delete init. request REQU_4H7UY4ZXAO72WR4GTUIW0XUKP before running init. again with same selection
Please help me with this.
i want to load the data in the init request to cube..
ThanksHi Shanthi,
Thanks For reply. I have already deleted the init request from source system to DSO and then i have tried still i am getting the error.
Thanks -
How to Load the data from excel file(Extension is .CSV) into the temp.table
Hi
How to Load the data from excel file(Extension is .CSV) into the temporary table of oracle in Forms11g.
My Forms Version is - Forms [64 Bit] Version 11.1.2.0.0 (Production)
Kindly Suggest the Solution.
Regards,
SachinHello Sachin,
You can use the following metalink note:How to Read Data from an EXCEL Spreadsheet into a Form Using Webutil Client_OLE2 (Doc ID 813535.1) and modify it a little bit.
Instead of copy values into forms you can save them in your temporary table.
Kind regards,
Alex
If someone's helpful or correct please mark it accordingly. -
How to load the data from .csv file to oracle table???
Hi,
I am using oracle 10g , plsql developer. Can anyone help me in how to load the data from .csv file to oracle table. The table is already created with the required columns. The .csv file is having about 10lakh records. Is it possible to load 10lakh records. can any one please tell me how to proceed.
Thanks in advance981145 wrote:
Can you tell more about sql * loader??? how to know that utility is available for me or not??? I am using oracle 10g database and plsql developer???SQL*Loader is part of the Oracle client. If you have a developer installation you should normally have it on your client.
the command is
sqlldrType it and see if you have it installed.
Have a look also at the FAQ link posted by Marwin.
There are plenty of examples also on the web.
Regards.
Al -
How to load the data from excel file into temprory table in Forms 11g?
Hi
How to Load the data from excel file(Extension is .CSV) into the temporary table of oracle in Forms11g.
My Forms Version is - Forms [64 Bit] Version 11.1.2.0.0 (Production)
Kindly Suggest the Solution.
Regards,
SachinDeclare
v_full_filename varchar2(500);
v_server_path varchar2(2000);
v_separator VARCHAR2(1);
v_filename VARCHAR2(400);
filename VARCHAR2 (100);
v_stop_load varchar2 (2000);
v_rec_error_log varchar2(4000);
v_error_log varchar2(4000);
ctr NUMBER (12);
cols NUMBER (2);
btn number;
RES BOOLEAN;
application ole2.obj_type;
workbooks ole2.obj_type;
workbook ole2.obj_type;
worksheets ole2.obj_type;
worksheet ole2.obj_type;
cell ole2.obj_type;
cellType ole2.OBJ_TYPE;
args ole2.obj_type;
PROCEDURE olearg
IS
args ole2.obj_type;
BEGIN
args := ole2.create_arglist;
ole2.add_arg (args, ctr);
ole2.add_arg (args, cols);
cell := ole2.get_obj_property (worksheet, 'Cells', args);
ole2.destroy_arglist (args);
END;
BEGIN
v_full_filename := client_get_file_name(directory_name => null
,file_name => null
,file_filter => 'Excel files (*.xls)|*.xls|'
||'Excel files (*.xlsx)|*.xlsx|'
,message => 'Choose Excel file'
,dialog_type => null
,select_file => null
If v_full_filename is not null Then
v_separator := WEBUTIL_CLIENTINFO.Get_file_Separator ;
v_filename := v_separator||v_full_filename ;
:LOAD_FILE_NAME := substr(v_filename,instr(v_filename,v_separator,-1) + 1);
RES := Webutil_File_Transfer.Client_To_AS(v_full_filename,"server_path"||substr(v_filename,instr(v_filename,v_separator,-1) + 1));
--Begin load data from EXCEL
BEGIN
filename := v_server_path||substr(v_filename,instr(v_filename,v_separator,-1) + 1); -- to pick the file
application := ole2.create_obj ('Excel.Application');
ole2.set_property (application, 'Visible', 'false');
workbooks := ole2.get_obj_property (application, 'Workbooks');
args := ole2.create_arglist;
ole2.add_arg (args, filename); -- file path and name
workbook := ole2.get_obj_property(workbooks,'Open',args);
ole2.destroy_arglist (args);
args := ole2.create_arglist;
ole2.add_arg (args, 'Sheet1');
worksheet := ole2.get_obj_property (workbook, 'Worksheets', args);
ole2.destroy_arglist (args);
ctr := 2; --row number
cols := 1; -- column number
go_block('xxx');
FIRST_RECORD;
LOOP
--Column 1 VALUE --------------------------------------------------------------------
olearg;
v_stop_load := ole2.get_char_property (cell, 'Text'); --cell value of the argument
:item1 := v_stop_load;
cols := cols + 1;
--Column 2 VALUE --------------------------------------------------------------------
olearg;
:item2 := ole2.get_char_property (cell, 'Text'); --cell value of the argument
cols := cols + 1;
--<and so on>
ole2.invoke (application, 'Quit');
ole2.RELEASE_OBJ (cell);
ole2.RELEASE_OBJ (worksheet);
ole2.RELEASE_OBJ (worksheets);
ole2.RELEASE_OBJ (workbook);
ole2.RELEASE_OBJ (workbooks);
ole2.RELEASE_OBJ (application);
END;
--End load data from EXCELPlease mark it as answered if you helped. -
How to load the data from excel file into table in oracle using UTL_FI
How to load the data from excel file into table in oracle
and from table to excel file
using UTL_FILE package
Please give me some exampleThis is something i tried in oracle apex
http://avdeo.com/2008/05/21/uploading-excel-sheet-using-oracle-application-express-apex/
Regards,
CKLP -
Error while loading the data in DSO (Bi 7.0)
Hi Friends,
I am working on BI 7.0 , I had run a DTP to load the data in DSO from another DSO.but there was some error in tranformation because of which DTP request didnt terminate with either green or red . then I fixed the bug in TRX and rerun the request .Now there are two requests. Now i deliberately changed the QM Light of the earlier request to Red so that I could run another request. The other DTP success fully loaded the data in Activation Que of DSO . But when I tried to Activate the second request I got a message that request can not be activated because earlier request is yet to be activated.
now I tried to delete the earlier request .Neither its getting deleted nor am I able to change the QM Light to Green .
What should I do to activate the Successful request to load the data in DSO.
puzzeled !
AnuragHi,
I have a similar situation....
I load data from DSO 1 to DSO2....i run the DTP and look at the monitor after its green when i go to manage and activate i am seeing two requests instead of 1...i am not sure why...Can you guys tell me if there is any setting that needs to be taken care of.
Thanks,
Vinay. -
How to load the data from informatica into bw & how to report the data
Hi friends,
how to load the data from informatica into bw & how to report the data
using cognos.(i.e how to access the data in sap bw using cognos 8 BI suite).
Thanks,
madhu.Inorder to report BW data into Cognos you can extract data from using Open Hub to the DB table from which Cognos reads.
For BW informatic integration refer following docs:
http://www.aman.co.il/aman/pfd/DataInteg_BR.q103cd.pdf.pdf
http://h71028.www7.hp.com/enterprise/cache/3889-0-0-225-121.html
http://devnet.informatica.com/learning/ePresentations.asp
http://72.14.203.104/search?q=cache:C741L86Q19oJ:devnet.informatica.com/showcase/resources/Essbase_DataSheet.pdfinformaticapowerconnect(BI)&hl=en&gl=in&ct=clnk&cd=3
http://www.informatica.com/customers/utilities_energy/fpl_group.htm
http://www.informatica.com/solutions/resource_center/technote_sapbw_65241004.pdf#search=%22Informatica%20to%20Bw%22 -
How to load the data from flat file ( ex excel ) to Planning area directly
Hi all ,
How can i load thedata fro m flat file directly to Planning area .
PLease help me in this.
Regards,
Chandu .download one key figure data from planning book ( interactive damand plan) and made some changes and need to upload the data back to same planning book
But, may I know why you are thinking of downloading, changing and uploading for just changing the figures for a particular key figure. You can do it in the planning book itself.
However, not all the key-figures can be changed. But, what type of key-figure you are speaking here? Is it like 'Forecast' for which the value is based on other key-figures, or is like a key-figure where some manual adjustments are to be done--so that it can be manually edited? However, in both the cases, the data can be changed in the planning book only. In first case, you can change the values of dependant key-figures and in the second case, you can change the key-figures directly.
And please note that you can change the values of the key-figures only at the detailed level. So, after loading the data in the book, use drill-down option, maintain the data at the detailed level, change the figures, and automatically, this gets reflected at the higher level.
In case you are unable to change the values, go to the 'Design' mode of the book, right-click your key-figure, under "Selected Rows", uncheck "Output Only" option. In case you are unable to see that option, then you are not authorised to change that. See if you can change the authorisations by going to the "Data View" tab in planning book configuration (/n/sapapo/sdp8b), and change the value of Status to 3.
Hope your query is answered with different solutions offered by many of the sdn colleagues here.
Regards,
Guru Charan. -
How to load the data using a plsql table in ODI.
Hi All ,
Can anyone help me on this ?
We have a PLSQL procedure which returns a plsql table as out parameter.
We are supposed to load the data in to a file using this plsql table (Table type) in ODI.
Can this be done using ODI?
Regards,
Karthik+Hi,
We have one process with a ref cursor (Oracle) as a source and remote Oracle DB as a target. I ended up writing my own KM that populates a global temporary table from the cursor first and then transfers the data to target. If temporary table is an option for you, the rest is pretty easy.
Regards. -
How to load the data from a staging table to interface table
Hi..
I have a staging table having these many columns
invoice_number,invoice_date,vendor_name,vendor_site_code,description,line-amount,line-description,segment1,segment2,segment3,segment4,segment5
I want to insert data into oracle interface tables
1st table is ap_invoices_interface which is primary
and 2nd is ap_invoice_lines_interfaces.
According to the invoice_id I have to insert the sum of amount in the amount column of primary table
can anyone plz give the codes .
any help appreciateHi,
you need to write pl/sql procedure or package for validiating the data and inserting.
first u need to know wat r the mandatory colums. and write the code igiving here a simple example
Create or replace procedure xxstg_po_vendors_int(errbuf out varchar2,retcode out number) IS
Cursor po_cur IS Select sno,VENDOR_NAME,SUMMARY_FLAG,ENABLED_FLAG From xxstg_po_vendor;
l_SUMMARY_FLAG Varchar(1);
l_ENABLED_FLAG varchar(1);
l_VENDOR_NAME varchar2(240);
l_err_msg varchar2(240);
l_flag varchar2(2);
l_err_flag varchar2(2);
Begin
Delete from Ap_suppliers_INT;
commit;
for rec_cur in po_cur loop
l_flag :='A';
l_err_flag:= 'A';
Begin
select summary_flag into l_SUMMARY_FLAG from po_vendors
where summary_flag = rec_cur.summary_flag;
Exception
when others then
l_summary_flag:= null;
l_flag:='E';
l_err_msg:= 'Summary_flag Does not Exist';
END;
FND_FILe.PUT_LINE(FND_FILE.LOG,'Inserting data into interface table'||l_flag);
Begin
Select enabled_flag into l_enabled_flag from po_vendors
where enabled_flag = rec_cur.enabled_flag;
exception
when others then
l_enabled_flag:=null;
l_flag :='E';
L_err_msg:='Enabled_flag Does not Exist';
End;
FND_FILE.PUT_LINE(FND_FILE.log,'Inserting data into interface table'||l_flag);
FND_FILE.PUT_LINE(FND_FILE.log,'Inserting data into interface table'||l_flag);
INSERT INTO AP_SUPPLIERS_INT
( VENDOR_INTERFACE_ID,VENDOR_NAME,SUMMARY_FLAG,ENABLED_FLAG )
values(rec_cur.sno,rec_cur.VENDOR_NAME,rec_cur.SUMMARY_FLAG,rec_cur.ENABLED_FLAG);
l_flag :=null;
l_err_msg:=null;
end loop;
commit;
end;
Regards
Goutham -
How to load the data from flat file
Hi ,
Im new to Oracle 10g . I have to upload a flat flle(notepad with , as a seperator) to the table in the database,
can you please tell me how to do it ?
Thanks
viviHi vivi,
Sure, read about the wonderful SQL*LOADER. This tool's purpose is exactly that.
Here's a link: Tahiti start page. Just type in sql*loader and off you go.
Since you did not mention your database version, I could not put a better one.
Regards,
Guido -
pls send ans for this
1b5595eb-fcfc-48cc-90d2-43ba913ea79f wrote:
pls send ans for this
use any text editor to eliminate the dot before loading -
How to load the exist Data Mart Request in to cube.
Hi Friends,
I have a scenario... i got DSO and one Cube , iam loading the data from DSO to Cube .
The number of records are more in the DSO and due to some clculation in the routine i need to load the data year by year(i got 2007 and 2008 year daya). I have loaded the 2007 data to the Infocube and in the DSO i can see the Data Mart Symbal against the Request Id when th load is finished successfully.
When iam trying to load the 2008 data from DSO to Cube iam getting the "0" records. I realised that the Data Mart symbal is exist in the DSO.
How to load the 2008 data in this scenario. If i delete the data mart sysbel means iam deleting the Cube request.
Can any have an idea on this.
Thaks in advance.HI,
Things are not clear.
How is loading happening if its delta or full load through DTP or you using 3.5 flow??
In any cases if you do a full load or full repair based on the year selection it should pick the records from the source...there is nothing to do with the data mart status in the case of full loads.
Data mart status will come into picture only when you schedule the delta loads.
Do a full load based on selections on year from the DSO to the cube...no need to delete the data mart or it will bring that request again delta is scheduled...does that request in DSO contains the data for 2008 only ...if yes then you can just delete the data mart status for that and do a delta...if not then do full loads as said.
Thanks
Ajeet -
How to see the data records for a dso based upon the request id?
Hi all,
How to see the data records based upon the request id on the dso.
I need to see the data for a dso based upon the request id 444493 loaded from another dso through repair full update.
thanksHi,
Step 1: select your request from DSO request tb
Step 2: Select your DSO just above your contents/requests/reconstruction tabs
Step 3: Click contents(Spectacles symbol) in the top area of your screen
Step 4: Slect the required fields
Regards,
Suman
Maybe you are looking for
-
Battery doesn't charge but ibook still runs on ac?
I've got a 2004 iBook G4 1.0ghz processor 1.25gb ram. Had it 16 months, no problems so far until today. When I plug in the AC the laptop runs off this power- the battery symbol changes to show the power plugs- but the battery does not charge. It stay
-
Revert back to Old status if ticket results in error..
Go to transaction CRM_DNO_MONITOR. Select a ticket for display. Let the status of the selected ticket be NEW. Now input all information in standard and screen Enhancement(By EEWB) input fields. Now make an action 'assign' After saving the status will
-
Character string buffer too small (select list query based LOV)
Hi, Using the select list query based LOV with a select witch is too big, you get this error. report error: ORA-20001: Error fetching column value: ORA-06502: PL/SQL: numeric or value error: character string buffer too small When using the Popup LOV
-
Check List for TTE Basic Settings
HELLO guys.. Can anybody send the check list for TTE Basic settings Thanks in advance Regards vamshi
-
Managing Two Libraries With Time Capsule
Hi, I just got a Time Capsule and an iPhone. I already have an iPod. The space on my Hard Disk is running low - mainly due to a large iTunes music selection and large number of photos. My question is this. Is there any way for me to manage two librar