How to load the exist Data Mart Request in to cube.

Hi Friends,
I have a scenario... i got DSO and one Cube , iam loading the data from DSO to Cube .
The number of records are more in the DSO and due to some clculation in the routine i need to load the data year by year(i got 2007 and 2008 year daya). I have loaded the 2007 data to the Infocube and in the DSO i can see the Data Mart Symbal against the Request Id when th load is finished successfully.
When iam trying to load the 2008 data from DSO to Cube iam getting the "0" records. I realised that the Data Mart symbal is exist in the DSO.
How to load the 2008 data in this scenario. If i delete the data mart sysbel means iam deleting the Cube request.
Can any have an idea on this.
Thaks in advance.

HI,
Things are not clear.
How is loading happening if its delta or full load through DTP or you using 3.5 flow??
In any cases if you do a full load or full repair based on the year selection it should pick the records from the source...there is nothing to do with the data mart status in the case of full loads.
Data mart status will come into picture only when you schedule the delta loads.
Do a full load based on selections on year from the DSO to the cube...no need to delete the data mart or it will bring that request again delta is scheduled...does that request in DSO contains the data for 2008 only ...if yes then you can just delete the data mart status for that and do a delta...if not then do full loads as said.
Thanks
Ajeet

Similar Messages

How to load the existing data from the databse in the CMP entity bean?

hello
my problem is as follows--
i am creating a CMP entity bean.in these beans client create the data instances using create() function.
now a entity bean will be created for the newly created data and it's EJBObject will also be formed.
now we will be able to perform finder methods over them.
remember these data has been newly created in the database.
but now if i want to perform the finder methods on the
existing data in the database( i don't need to use create() fn as i am not "creating" the data.). how will i perform the query over the existing data.
basically i have to make a CMP bean to extract the data corresponding to a particular condition , from the database table. i don't want to create the data in the database but just find out what data satisfies my condition.
thanking you
Prashant

you have to use findByXXX methods. depending on your appserver you may have to declare them (and eventually the query you want to be used) in the vendor specific deploiement descriptor.
(e.g. using jboss i don't remember having explicitly declare the findBySomeField method - where someField is a persistent field - in the dd, whereas with bas all finder methods have to be explicitly declared)
[note that obviously these methods have to be present in your home interface]

How to edit the existing data in the XML file from java programming.

Hi all
i am able to create XML file with the sample data as below from java programming.
i need sample code on how to edit the existing data in the XML file?
for example
<?xml version="1.0"?>
   <mydata>
           <data1>
                     <key1>467</key1>
                    <name1>Paul</name1>
                    <id1>123</id1>
          </data1>
          <data2>
                     <key2>467</key2>
                    <name2>Paul</name2>
                    <id2>123</id2>
          </data2>
    </mydata>
i am able to insert the data in the XML.
now i need sample code on how to modify the data in the above XML file from the java programming for only key2,name2,id2 tags only. the remaining tags data in the XML file i want to keep same data except for key2,name2,id2 which are i want to modify from java code
Regards
Sunil
[points will be always rewardable]

hi
u need a parser or validate the xml file for to read the xml file from java coding u need for this
xml4j.jar u can download this file from here
http://www.alphaworks.ibm.com/tech/xml4j
or we can use the SAX(simple API for XML)
some sample applications for this
http://www.java-tips.org/java-se-tips/javax.xml.parsers/how-to-read-xml-file-in-java.html
http://www.developertutorials.com/tutorials/java/read-xml-file-in-java-050611/page1.html
http://www.xml-training-guide.com/e-xml44.html
let me know u need any other info
bvr

How to reset the existing data in a company code?

Hi All,
Can any one help me how to reset the existing data in a company code? when we want to change one Chart of Accounts to another Chart of Accounts in OB62 scree.
Thanks
Chandra

Hi
If asset accounting is active also use OABL tcode.
As mentioned above, please be cautious when using these transactions.
Do award points if found useful.
Regards,
Karthik

How to Enter the existing data in the entity beans?

hello
my problem is as follows--
i am creating a CMP entity bean.in these beans client create the data instances using create() function.
now a entity bean will be created for the newly created data and it's EJBObject will also be formed.
now we will be able to perform finder methods over them.
remember these data has been newly created in the database.
but now if i want to perform the finder methods on the
existing data in the database( i don't need to use create() fn as i am not "creating" the data.). how will i perform the query over the existing data.
basically i have to make a CMP bean to extract the data corresponding to a particular condition , from the database table. i don't want to create the data in the database but just find out what data satisfies my condition.
thanking you
Prashant

All I say here is based on limited knowledge on 1.1 ejb specification. There could be improvements on 2.0 spec. 1.1 specification does not formaly provide how the finders should work for container managed beans. It leaves it at the hand of bean providers. Currently bean providers describes the finers in a description of the Entity Bean. Refer to documentation accompanied with application server you are using.
I attach the famous bank account example in weblogic server.
<finder-list>
<finder>
<method-name>findBigAccounts</method-name>
<method-params>
<method-param>double</method-param>
</method-params>
<finder-query><![CDATA[(> balance $0)]]></finder-query>
</finder>
</finder-list>
Method definition in Home inteface is
public Enumeration findBigAccounts(double balanceGreaterThan)
throws FinderException, RemoteException;

How to Load the Master Data for custom defined Z infoobjects?

Hi Gurus,
This is the requirement.
Some screen enhancements has to be made by adding new Custom fields( like two text boxes,eg Name and city ) in such a way if we enter data into that text box,that data value for both of the Enhancements has to be stored in some table.If this data is a master data,then how would I pull this master data into BW.
Please someone throw some light on this problem.
Lets say a Screen is enhanced with NAME and CITY with text text boxes.Let the user enters the value for NAME and CITY.Let them be stored under two different tables ZTAB1 and ZTAB2.How would I load this master data into custom Defined Z infoobjects ZNAME AND ZCITY in BW.
Please help me out.
Thanks is Advance,
Regards

you can by creating generic datasources on thoase tables with Full load or delta.
if the number entries is less.. you can try full load...
if it is more... along with required fields...put date also as one fields. which needs to get date of execution of program or date of uploading to Tables. this will be useful build Delta Mechanism.
all the best.
Nagesh Ganisetti.

How to load the XML data of SAP to a target database

i use an IDocs to read from SAP and converted into XML (ie .XSD ) and now i want to move that XML data to target data base.
i am trying to move XML data to template table, but i am getting this mapping error , even though i used NRDM and mapping while moving to template table.
ERROR MESSAGE :
Invalid mapping expression for column <Query_1.SNDPRN>. Additional information: <Cannot parse expression.
Table <Query.EDI_DC40> for column <SNDPRN> does not occur in the FROM clause. For a top-level query, all columns must belong to some table in the FROM clause.. (BODI-1112351)>. (BODI-1111081)

Hi Srikanth,
Please find my understanding below.Correct me if my understanding is wrong.
1)You have moved the data from IDOC to XML file (i.e Creating an XSD and using it as target).
2)Now this XML file, will you your source and you are going to load it into the target table.
The error looks like BODS is unable to parse the Hierarchy structure to the flat structure.
How are you un-nesting your data (Are you using XML pipeline) .
Thanks
Arun.

I have enhanced standard master datasource , How to load the Text for it?

Hi Experts,
I had enhanced 0MATERIAL_ATTR with ZTGRM field.User exit is written and the data is populated and checked in RSA3.
Replicated,loaded in BW side.Activated the master data.It shows only the attribute not the text.
Tried loading 0material_text and loaded successfully, activated but while maintaining the master data , i can able to see only the attribute values not the text.
Can any one help how to load the text for the enhanced attribute?
Thanks in advance
Ganesh Kumar

Hi Tony,
Loaded the 0MATERIAL_TEXT ,also sucessful.
After loading activated the 0material but i could only see values for 0material_attr not for the 0material_text.
Can you tell me how to load the text data to the newly enhanced attribute???

How to Load the data from excel file(Extension is .CSV) into the temp.table

Hi
How to Load the data from excel file(Extension is .CSV) into the temporary table of oracle in Forms11g.
My Forms Version is - Forms [64 Bit] Version 11.1.2.0.0 (Production)
Kindly Suggest the Solution.
Regards,
Sachin

Hello Sachin,
You can use the following metalink note:How to Read Data from an EXCEL Spreadsheet into a Form Using Webutil Client_OLE2 (Doc ID 813535.1) and modify it a little bit.
Instead of copy values into forms you can save them in your temporary table.
Kind regards,
Alex
If someone's helpful or correct please mark it accordingly.

How to load the data from .csv file to oracle table???

Hi,
I am using oracle 10g , plsql developer. Can anyone help me in how to load the data from .csv file to oracle table. The table is already created with the required columns. The .csv file is having about 10lakh records. Is it possible to load 10lakh records. can any one please tell me how to proceed.
Thanks in advance

981145 wrote:
Can you tell more about sql * loader??? how to know that utility is available for me or not??? I am using oracle 10g database and plsql developer???SQL*Loader is part of the Oracle client. If you have a developer installation you should normally have it on your client.
the command is
sqlldrType it and see if you have it installed.
Have a look also at the FAQ link posted by Marwin.
There are plenty of examples also on the web.
Regards.
Al

How to load the data from excel file into temprory table in Forms 11g?

Hi
How to Load the data from excel file(Extension is .CSV) into the temporary table of oracle in Forms11g.
My Forms Version is - Forms [64 Bit] Version 11.1.2.0.0 (Production)
Kindly Suggest the Solution.
Regards,
Sachin

Declare
    v_full_filename         varchar2(500);
    v_server_path           varchar2(2000);
    v_separator             VARCHAR2(1);
    v_filename              VARCHAR2(400);
    filename                VARCHAR2 (100);
    v_stop_load             varchar2 (2000);
    v_rec_error_log         varchar2(4000);
    v_error_log             varchar2(4000);
    ctr                     NUMBER (12);
    cols                    NUMBER (2);
    btn                     number;
    RES                     BOOLEAN;
    application             ole2.obj_type;
    workbooks               ole2.obj_type;
    workbook                ole2.obj_type;
    worksheets              ole2.obj_type;
    worksheet               ole2.obj_type;
    cell                    ole2.obj_type;
    cellType                ole2.OBJ_TYPE;
    args                    ole2.obj_type;
    PROCEDURE olearg
    IS
    args   ole2.obj_type;
    BEGIN
    args := ole2.create_arglist;
    ole2.add_arg (args, ctr);
    ole2.add_arg (args, cols);
    cell := ole2.get_obj_property (worksheet, 'Cells', args);
    ole2.destroy_arglist (args);
    END;
BEGIN
v_full_filename := client_get_file_name(directory_name => null
                                 ,file_name      => null
                                 ,file_filter    => 'Excel files (*.xls)|*.xls|'
                                                                        ||'Excel files (*.xlsx)|*.xlsx|'
                                 ,message        => 'Choose Excel file'
                                 ,dialog_type    => null
                                 ,select_file    => null
If v_full_filename is not null Then
v_separator := WEBUTIL_CLIENTINFO.Get_file_Separator ;
v_filename := v_separator||v_full_filename ;
:LOAD_FILE_NAME := substr(v_filename,instr(v_filename,v_separator,-1) + 1);
RES := Webutil_File_Transfer.Client_To_AS(v_full_filename,"server_path"||substr(v_filename,instr(v_filename,v_separator,-1) + 1));
--Begin load data from EXCEL
BEGIN
    filename := v_server_path||substr(v_filename,instr(v_filename,v_separator,-1) + 1); -- to pick the file
    application := ole2.create_obj ('Excel.Application');
    ole2.set_property (application, 'Visible', 'false');
    workbooks := ole2.get_obj_property (application, 'Workbooks');
    args := ole2.create_arglist;
    ole2.add_arg (args, filename); -- file path and name
    workbook := ole2.get_obj_property(workbooks,'Open',args);
    ole2.destroy_arglist (args);
    args := ole2.create_arglist;
    ole2.add_arg (args, 'Sheet1');
    worksheet := ole2.get_obj_property (workbook, 'Worksheets', args);
    ole2.destroy_arglist (args);
    ctr := 2;                                                     --row number
    cols := 1;                                                -- column number
    go_block('xxx');
    FIRST_RECORD;
    LOOP
            --Column 1 VALUE --------------------------------------------------------------------
        olearg;
        v_stop_load := ole2.get_char_property (cell, 'Text'); --cell value of the argument
        :item1 := v_stop_load;
        cols := cols + 1;
          --Column 2 VALUE --------------------------------------------------------------------
        olearg;
        :item2 := ole2.get_char_property (cell, 'Text'); --cell value of the argument
        cols := cols + 1;
        --<and so on>
    ole2.invoke (application, 'Quit');
    ole2.RELEASE_OBJ (cell);
    ole2.RELEASE_OBJ (worksheet);
    ole2.RELEASE_OBJ (worksheets);
    ole2.RELEASE_OBJ (workbook);
    ole2.RELEASE_OBJ (workbooks);
    ole2.RELEASE_OBJ (application);
END;
--End load data from EXCELPlease mark it as answered if you helped.

How to load the data from excel file into table in oracle using UTL_FI

How to load the data from excel file into table in oracle
and from table to excel file
using UTL_FILE package
Please give me some example

This is something i tried in oracle apex
http://avdeo.com/2008/05/21/uploading-excel-sheet-using-oracle-application-express-apex/
Regards,
CKLP

How to load the data from informatica into bw & how to report the data

Hi friends,
how to load the data from informatica into bw & how to report the data
using cognos.(i.e how to access the data in sap bw using cognos 8 BI suite).
Thanks,
madhu.

Inorder to report BW data into Cognos you can extract data from using Open Hub to the DB table from which Cognos reads.
For BW informatic integration refer following docs:
http://www.aman.co.il/aman/pfd/DataInteg_BR.q103cd.pdf.pdf
http://h71028.www7.hp.com/enterprise/cache/3889-0-0-225-121.html
http://devnet.informatica.com/learning/ePresentations.asp
http://72.14.203.104/search?q=cache:C741L86Q19oJ:devnet.informatica.com/showcase/resources/Essbase_DataSheet.pdfinformaticapowerconnect(BI)&hl=en&gl=in&ct=clnk&cd=3
http://www.informatica.com/customers/utilities_energy/fpl_group.htm
http://www.informatica.com/solutions/resource_center/technote_sapbw_65241004.pdf#search=%22Informatica%20to%20Bw%22

How to find the creation date for a released requests..

Hi friends ,
In se09 tcode , we a date which represents the last changed date .. Now , for a particular Released request i want to find out the Creation date for it . How can i find it . I checked the tables like E070create there also we have requests that not released yet , i have also checked se03 and other tcode and a fn mo dules like TR_READ_GLOBAL_INFO_OF_REQUEST .
So how to find the creation date for a released requests. Iam waiting for ur inputs..
Thanks in advance..

hi,
Did u found the way to get the request creation date?
I also need the same information.
This needed for audit purpose........so it is must.
Please help me in this.
Best regards,
vinod

How to load the data in DSO

Hello,
In my BI system ,i have the DSO and InfoCube ,haveing the
infopackage Delta and Init..can any one tell me how to load the data from R/3 in to DSO ,when we have two infopackage(one is delta nad other is Init).Please define brifly.

Hello,
The procedure is as follows.
1) First run the init infopackage (either with or without data), preferably with data.
2) Then run the delta infopackage always. (it will get delta records always).
Now if there are any errors and delta gets faulted, you can delete the init from the init infopackage and run the init infopackage again.
And then schedule the delta.
REgds,
Shashank

How to load the exist Data Mart Request in to cube.

Similar Messages

Maybe you are looking for