How to logon to a BW system

Hello everyone
I have installed IDES Enterprise and I tried to connect with Business Explorer>Browser SAp BW 3.x it says that
DEV (sys ID) is not an BW system please conect to a bw system i dont know what i am donig wrog.
Is it possible to practice BW on IDES or do i need something else like ECC, ERP
ramdeen.

Hi Ram:
If you want to practice BW, please consider this path:
Download and configure Netweaver Abap.
https://www.sdn.sap.com/irj/sdn/downloads?rid=/library/uuid/80fd9a0a-e306-2a10-c896-b84c77c13ed2
This is your first plataform to start.
As for your first BI Model, check this tutorial.
A beginner's guide to your first BI model in NW2004S
Hope this helps with your start.
Assign points if helpful.
Kind regards,
Francisco.

Similar Messages

How to use logon group of backend systems via reverse proxy

Hi
we have setup EP 6.0 in DMZ2 and connected backend servers in INTERNAL network. We have another firewall for DMZ1. In order to provide access to EP and respective backend systems, we have installed two reverse proxy servers on Apache, one in DMZ1 and another in DMZ2. We could able to reach to the backend system successfully in this setup by using proper rewrite rule for virtual systems in order to connect to multiple systems.
However we have observed that connection for backend systems is established only to respective CI and not to any of the application server, even though we have created "Load Balancing" systems in EP and used the same logon group of backend systems.
Kindly suggest us if there is any option using which we can establish connection via Load balancing option in this current setup of ours.
Thanks
Pradeep

Hi Mechael/Dutt
We r using Integrated ITS in WAS 6.40. and we r maintaing seperate entries for each systems in rewrite rule.
Thanks
PRadeep

How to create a DB Source system in BW

Hi Guys,
Can anybody explain me how to create DB Connect source system in BW.
Points will be awarded.
Thanks,
Chinna

Hi Chinna,
Below are the steps to be followed for the SS creation in BW :
Prerequisites :
1.System Number
2.System IP address
3.ALEOLTP like userid and password this is the RFC user ID in the R/3 system. Usually set to communication - must be set to dialog in the R/3 Source System for the duration of the create/restore connection process. Note: the password must be in capital letters.(If all instances are in unicode system)
1.At the time of making the connection, the R/3 source system will need to be opened for client independent configuration.
2.If it is a connection create or restore, the personal userid of the person doing the work must have SM59 access.
Follow the naming convention which is being used in your system.
1.     Logon to r/3 source system using the r/3 RFC userid to check that the userid has been set to dialog user. It is mandatory that the r/3 source system userid be setup temporarily as dialog to create the connection. If not contact the requester to have this done before continuing with the next step.
Note: When re-checking to ensure that the r/3 userid is a dialog user, you may get prompted for new password. Change password, and make a note of the new password. Use this new password in the steps that follow for the r/3 RFC userid.
2.     Logon to BW system using your own userid.
3.     Enter transaction RSA1, In Source Systems, right-click on Source Systems as shown below to create new connection.
4.     In the screen select the appropriate Source System connection type. Suppose your are creating connection for r/3 instance, so in this case we pick the very first option.
5.     A popup window will get displayed asking for the necessary information. To fill in the appropriate information in the that screen you need the following information concerning the r/3 source system.
     IP address (Application Server) &
     System Number
Get this information for the r/3 source system from the SAP Logon Pad.
6.     If Parameters have been incorrectly entered then the following error message will appear : Check connection parameters for the source system.
7.     Re-check and re-enter correctly. If all is good then You will see the following prompt : Please log on as an administrator in the following screen.Click green check to continue.
8.     This will bring you to the r/3 logon screen. Logon using the r/3 RFC id. Once logged on click Check in Check RFC destination dialog box.
9. Consider the r/3 RFC destination screen.
10. Check to make sure that BW system information (Userid, IP address, System Number etc) is correctly showing in the Technical Settings and Logon/Security tabs. Next do the following,
     Step 1: Enter password for the BW RFC userid id.
     Step 2: Save Settings
     Step 3: From Test Menu , click on authorization. Ensure there are no errors
     Step 4: Back out of screen.
11.     System may ask you to logon as administrator again. Logon as in Step 10. This time click on Use in Check RFC destination dialog box.
Connection related processing will start up at this time, and continue for a little while (can be a couple minutes or more).
12.     Subsequently, a dialog box will show up on the screen.
13. Pick option, Replicate As Well.
Replication and activation of data sources & transfer structures will begin.
With the completion of this step you will have successfully established this source system connection. To confirm, right-click on the new source system entry and click on check
14. If the connection is good, the following message with the source system ID will display at bottom left corner of screen : Source system connection is Ok.
Hope this will be helpful to you.
Thanks & Regards,
suchitra.V

How to logon the j2ee engine with logon group

hi everyone,
I have installed an HA j2ee engine system with MSCS.
But i donot know how to logon the DI&CI with logon group like ABAP system
Thanks very much
Regards
Peter

http://help.sap.com/saphelp_nw70/helpdata/EN/b5/e8239ef7bd494f896a84625d4b688f/frameset.htm

"You are not authorized to logon to the target system"

One of our clients has just recently upgraded their SAPGUI to 640 (patch level 13). Since then they have been unable to log on to one of their development boxes. Connections to all other boxes are successful but their test box returns a "You are not authorized to logon to the target system" error message.
The client has assured me that the username, password and client are correct and that they can logon without a problem from the logon pad. I have also requested that she change password and try using the same case when she is logging on.
So far none of this has helped. Does anyone have any ideas of how I can get to the bottom of this?
Thanks,
Charles

I can only guess that the problem has to do with the move to case-sensitive passwords in newer patchlevels.
Did they try to enter the password all-uppercase?

How do I create an archive system for a blog created with a custom app?

I had to create a blog using a custom app, because I needed an image to show up in the list view (a feature I can't believe does not exist in the blog module). Anyways, I am wondering how can I create an archive system? Do I need to create categories for each month/year and then classify the post each time we create one. Then manually create links each month to pages that filters listing by that category? This is the system I tried, but I was wondering if there was a better way.
Also, I would like to have a sidebar that shows all the authors/contributors of the blogs and have a count under their photo that shows how many blogs they have contributed to, and have this update dynamically each time they create a new post. I was wondering if a data source tag is the way to do this but I don't have enough information on how the data source tag even works, to really know how to do this.
I have searched google for hours, and even signed up for BC gurus tutorials with no real luck. I thought BC gurus was going to have the answer but it wasn't quite detailed enough. Any help would be much appreciated. Thanks!

You can use classifications but there is no auto feature to archive like that on web apps.
In terms of the blog, Like I have said to everyone that has posted about blog preview images:
http://www.prettypollution.com.au/business-catalyst-blog
Just one example of an image at the start of the blog post rendering out, not hard at all.

How do you identify the Logical system in start routine of a transformation

My scenario is this. I have five r3 systems that I am extracting from. In the start routine of the transformation from the r3 data source to my data store I am going to delete data and I need to know the source system id. How do I identify the logical system or source system id in the transformation. Is there a system field that contains this information. I do not want to hard code the source system id in the routine.

hi
have a lool at tables rsreqdone and rsbkrequest with a join you should be able to determine the source.
regards
Boujema
How to give points: Mark your thread as a question while creating it. In the answers you get, you can assign the points by clicking on the stars to the left. You also get a point yourself for rewarding (one per thread).
Edited by: Boujema Bouhazama on May 9, 2008 12:04 AM

How to recover my macbook pro system password

how to recover my macbook pro system password??

You don't, you set a new one
 Cheat sheet to help diagnose and fix your Mac

When I open iPhoto 9.2.1 it says that my library needs to be upgraded but when I upgrade the library I am trying to open (33 GB worth of pictures from 2006) the new application says it cannot read the files and how to find them on the system to reimport?!

When I open iPhoto 9.2.1 it says that my library needs to be upgraded but when I upgrade the library I am trying to open (33 GB worth of pictures from 2006) the new application says it cannot read the files and how to find them on the system to reimport?! and then I'd like to erase the original files since the space requirement is huge!!!! Why is upgrading software iPhoto such a pain. I've gotta get a presentation done and all I get for my money is roadblock!!!

hello, it sounds like the library is damaged.
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.

How to Disable "Auto Align" in [System Pref.] - [Display] - [Arrangement]

Does anyone know How to Disable "Auto Align" in [System Preferences] -> [Display] -> [Arrangement]?
It always want to align the two screens from the top when they are lined up close together and I need them to be aligned from the bottom. Since the resolution heights are so close together (1080 & 1050) it does not allow one to align side by side from the bottom as it prioritizes top alignment.
I guess I'm looking for a script to disable this feature.

Anyone got any ideas?

How to use BPM itegrate different system aysnchronously

for example, 3 enterprise applications need to be integrated together with BPM, which are Bid system, ERP system, Finance system,
and erery business document should be approved by persons one by one in the 3 different application system with its workflow respectively, we can't change the workflow in the
different system, and only when the document is finished approved in the BID system asynchronously, it can enter the ERP system, an so on .
after the business document is approved in the Bid system, it should be returned in the BPM contexts,and the BPM user will dicide whether it will be enter the next system.
so how to integrate the 3 application system?
I draw a[ BPM process|http://www3.picturepush.com/photo/a/2586651/640/Picture-Box/aaa.jpg], but in this process, the "ERP human activity" activity, this activity how to get data from the "BID system asyn workflow" which is an asynchronized
wrokflow?

Gavin,
For asynchronous cases, you should adopt the "wait and trigger" principle. In BPM, you can acheive it by using a timer and an automated activity. Set the timer repeat time to say 15 mins (you should change it as per your business scenario), and then execute / trigger an automated activity, which will call your Bid system to check the state (whether the data entry / specific workflow is over). If the state is completed, (you may check using exclusive choice), move to next step. Else, pass back the control to timer which will again make the process wait. This way the objective could be attained.
Hope this helps.
Br,
Bala

HT1338 Purchased a used macbook pro with Mountain Lion. My old Mac runs Snow Leopard is backed up to Time machine. How do I register the operating system to me and how do I use Time Machine to move my files to the new used computer?

Purchased a used macbook pro with Mountain Lion. My old Mac runs Snow Leopard is backed up to Time machine. How do I register the operating system to me and how do I use Time Machine to move my files to the new used computer?

If you look at the User Tips tab, you will find a write up on just this subject:
https://discussions.apple.com/docs/DOC-4053
The subject of buying/selling a Mac is quite complicated. Here is a guide to the steps involved. It is from the Seller's point of view, but easily read the other way too:
SELLING A MAC A
Internet Recovery, and Transferability of OS & iLife Apps
Selling an Old Mac:
• When selling an old Mac, the only OS that is legally transferable is the one that came preinstalled when the Mac was new. Selling a Mac with an upgraded OS isn't doing the new owner any favors. Attempting to do so will only result in headaches since the upgraded OS can't be registered by the new owner. If a clean install becomes necessary, they won't be able to do so and will be forced to install the original OS via Internet Recovery. Best to simply erase the drive and revert back to the original OS prior to selling any Mac.
• Additionally, upgrading the OS on a Mac you intend to sell means that you are leaving personally identifiable information on the Mac since the only way to upgrade the OS involves using your own AppleID to download the upgrade from the App Store. So there will be traces of your info and user account left behind. Again, best to erase the drive and revert to the original OS via Internet Recovery.
Internet Recovery:
• In the event that the OS has been upgraded to a newer version (i.e. Lion to Mountain Lion), Internet Recovery will offer the version of the OS that originally came with the Mac. So while booting to the Recovery Disk will show Mountain Lion as available for reinstall since that is the current version running, Internet Recovery, on the other hand, will only show Lion available since that was the OS shipped with that particular Mac.
• Though the Mac came with a particular version of Mac OS X, it appears that, when Internet Recovery is invoked, the most recent update of that version may be applied. (i.e. if the Mac originally came with 10.7.3, Internet Recovery may install a more recent update like 10.7.5)
iLife Apps:
• When the App Store is launched for the first time it will report that the iLife apps are available for the user to Accept under the Purchases section. The user will be required to enter their AppleID during the Acceptance process. From that point on the iLife apps will be tied to the AppleID used to Accept them. The user will be allowed to download the apps to other Macs they own if they wish using the same AppleID used to Accept them.
• Once Accepted on the new Mac, the iLife apps can not be transferred to any future owner when the Mac is sold. Attempting to use an AppleID after the apps have already been accepted using a different AppleID will result in the App Store reporting "These apps were already assigned to another Apple ID".
• It appears, however, that the iLife Apps do not automatically go to the first owner of the Mac. It's quite possible that the original owner, either by choice or neglect, never Accepted the iLife apps in the App Store. As a result, a future owner of the Mac may be able to successfully Accept the apps and retain them for themselves using their own AppleID. Bottom Line: Whoever Accepts the iLife apps first gets to keep them.
SELLING A MAC B
Follow these instructions step by step to prepare a Mac for sale:
Step One - Back up your data:
A. If you have any Virtual PCs shut them down. They cannot be in their "fast saved" state. They must be shut down from inside Windows.
B. Clone to an external drive using using Carbon Copy Cloner.
1. Open Carbon Copy Cloner.
2. Select the Source volume from the Select a source drop down menu on the left side.
3. Select the Destination volume from the Select a destination drop down menu on the right
side.
4. Click on the Clone button. If you are prompted about creating a clone of the Recovery HD be
sure to opt for that.
Destination means a freshly erased external backup drive. Source means the internal
startup drive.
Step Two - Prepare the machine for the new buyer:
1. De-authorize the computer in iTunes! De-authorize both iTunes and Audible accounts.
2, Remove any Open Firmware passwords or Firmware passwords.
3. Turn the brightness full up and volume nearly so.
4. Turn off File Vault, if enabled.
5. Disable iCloud, if enabled: See.What to do with iCloud before selling your computer
Step Three - Install a fresh OS:
A. Snow Leopard and earlier versions of OS X
1. Insert the original OS X install CD/DVD that came with your computer.
2. Restart the computer while holding down the C key to boot from the CD/DVD.
3. Select Disk Utility from the Utilities menu; repartition and reformat the internal hard drive.
Optionally, click on the Security button and set the Zero Data option to one-pass.
4. Install OS X.
5. Upon completion DO NOT restart the computer.
6. Shutdown the computer.
B. Lion and Mountain Lion (if pre-installed on the computer at purchase*)
Note: You will need an active Internet connection. I suggest using Ethernet if possible because
it is three times faster than wireless.
1. Restart the computer while holding down the COMMAND and R keys until the Mac OS X
Utilities window appears.
2. Select Disk Utility from the Mac OS X Utilities window and click on the Continue button.
3. After DU loads select your startup volume (usually Macintosh HD) from the left side list. Click
on the Erase tab in the DU main window.
4. Set the format type to Mac OS Extended (Journaled.) Optionally, click on the Security button
and set the Zero Data option to one-pass.
5. Click on the Erase button and wait until the process has completed.
6. Quit DU and return to the Mac OS X Utilities window.
7. Select Reinstall Lion/Mountain Lion and click on the Install button.
8. Upon completion shutdown the computer.
*If your computer came with Lion or Mountain Lion pre-installed then you are entitled to transfer your license once. If you purchased Lion or Mountain Lion from the App Store then you cannot transfer your license to another party. In the case of the latter you should install the original version of OS X that came with your computer. You need to repartition the hard drive as well as reformat it; this will assure that the Recovery HD partition is removed. See Step Three above. You may verify these requirements by reviewing your OS X Software License.

How to connect to the multiple system in the same environment

Hi Everyone ,
We are integrating SAP EP and BOE . We are facing SSO problem ,as there are 2 system in same environment .
Suppose we have XX1 and XX2 as BW backend system . IF Default entry on server is kept blank then we get :
"u2022 Account information not recognized: No SAP system was passed as part of the user name and there was no default system defined. User credential validation cannot continue. " error.
Whereas if we give XX1 as defaut system on server , then SSO is not happening we as are XX2 users .
Anyone has any idea on how to connect to multiple backend system in the same environment .
Edited by: shivani mishra on May 20, 2010 11:22 AM

Hi,
As you can see in the help link below:
http://help.sap.com/saphelp_nw70/helpdata/en/45/2f873d1ca96d7be10000000a114a6b/content.htm
There is a trust system and the trusted systems. One system can trust in many other systems. You have just to configure it exporting and importing the certificates as explained in the link.

How to transfer data from one system to another by datamart please give de

how to transfer data from one system to another by datamart please give details

Hi Deba,
Find the below SAP help doc which may help u...
http://help.sap.com/saphelp_nw70/helpdata/en/12/43074208ae2a38e10000000a1550b0/frameset.htm
Also find the below threads...
Loading data from one cube to another cube.
data copy from infocube to infocube in two different BW systems
Delta when loading from ODS to ODS
reg datamart
Data mart flag
Regards,
KK.

How to change printer and or system settings to print in color

How to change printer and or system settings to print in color

You can change the brightness with an RGBImageFilter which converts the rgb values to HSV, increases the value, and converts back to rgb.

How to logon to a BW system

Similar Messages

Maybe you are looking for