How to maintain 7.2 milion data in heap organized table without partition

Dear Guys,
I need to maintain a table in oracle 10g where there around 7.2 milion data. That table does not have any partition concept as oracle 10g standard edition does not support partitioning. And day by day data volume is increasing.
Now in this scenario without affecting my existing structure how do I properly managed that dataload in a optimized way.
Thanks in advance. Please do suggest a valid opnion.
Thanks
Anirban

user595167 wrote:
Dear Guys,
I need to maintain a table in oracle 10g where there around 7.2 milion data. That table does not have any partition concept as oracle 10g standard edition does not support partitioning. And day by day data volume is increasing.
Now in this scenario without affecting my existing structure how do I properly managed that dataload in a optimized way.
Thanks in advance. Please do suggest a valid opnion.
Thanks
AnirbanMy opinion is you should forget about the "7.2 million data" (whatever that means) and focus on performance. Are you experiencing an actual performance issue?
I'll leave it to others to decide if my opinion is "valid".

Similar Messages

How to maintain the material master data in plant

Hi all,
while creating BOM I am getting an error "no material master data in plant' can some one help me how to maintain the material master data in plant
Regards,
Balu

Check the material available in MARC table in SE11 transaction against your plant.If it is not available please maintain through MM01 transaction.

How to maintain version in ERwin Data Modeler

Hi all
Please tell me
how to maintain version in ERwin Data Modeler
regards

In SharePoint, navigate to the form library, and then click Library Tools > Library > Settings > Library Settings.
On the Form Library Settings page under General Settings, click
Versioning settings.
On the Versioning Settings page under the Document Version History section, select either the
Create major versions option or the Create major and minor (draft) versions option, and click
OK.
http://www.bizsupportonline.net/blog/2012/10/version-control-infopath-forms-templates-sharepoint-libraries/
Or
plan this wsp nfoPath_VersionHistory.wsp
http://infopathversioning.codeplex.com/

How to Maintain the MM Master Data from one company code to other co code

Hi Experts,
Can any one pls tell me how to Maintain the MM Master Data from one company code to other co code.
Presently we created New plants,New Purchase Orgs under different company code.
1) Material Master data
2) Vendor MAster data
3) PIR
4) Source List
Is there any standard Transactions...??
Please reply.
Brgds,
KK

Hi
Check out the link -
http://wiki.sdn.sap.com/wiki/display/ABAP/StepstocreateasimpleLSMWusingbatchinput+recording
lsmw for data migration for xk01 transaction
http://www.sap-img.com/general/lsmw-steps-for-data-migration.htm
Regards
Anand

I want to get data from only RESB table without loss of any deltas

i have to fetch the reservation details for the production orders.
we are using descrete manufacturing method to keep track the Work in process and cost .
for addition of components manually in the production order we can track thru change date i.e From AUFK table with field name AEDAT. for each time when we are adding the components the system will create a new line item In tableRESB-OBJNR(field)
i need very few fields from RESB table to be pulled into SAP BW.
how should i proceed creating a generic exractor without any loss of deltas.
i want to get data from only resb table into sap bw.
how should i proceed with Generice extractor with single table RESB and what would be the delta field . could any one throw some light .
all answers would be rewarded with points

I have few reports for BOM data is to be pull into bw
all the reports contain the same tables Mentione below
MAST- material to BOM LINK
STKO- BOM header
STPO- BOM ITEM
STAS- BOM ITEM SELECTION
how should i create ageneric datsource satisfying that all the data comes from these tables without fail of deltas,
my doubts.1. Do i have to create a separate data sources (generic) for all these individually and load into separate ODS'S AND CLUB THEM into single ODS further.?
if i create i dont know what should be delta field that has to be picked for each datasource
2. Do i have to create a view on all these tables and create a generic datasource.if created what would be the delta field i have to select.
could you pls let me know how should i pull the data without loosing any deltas
could you pls let me know the flow with delta fields mentioned
regards,
P

How to maintain dynamic rows with data when click on Previous button?

Hi,
I have 1 aspx page and divided into 3 pages using panels.Each panel has "Next" and Previous buttons
I have created and deleted dynamic table rows when click on Add button using javascript. whenever i click on Next button it will navigate to same page of next panel.
when i click on previous button then it goes to previous panel but whatever i have added dynamic table rows in 1st panel that got removed.
Can u please help me for how to maintain state of dynamic table rows with entered data when click on Previous button?
How to get dynamic table rows with entered data in previous panel when click on Previous button?
Please find the below javascript code:
function insertRow() {
if (index >= 2) {
document.getElementById('deleteRow').style.display = "inline";
else { document.getElementById('DeleteRow').style.display = "none"; }
var table = document.getElementById("myTable");
var row = table.insertRow(table.rows.length);
cell1 = row.insertCell(0);
t1 = document.createElement("select");
t1.options[t1.options.length] = new Option('--Select--', '0');
t1.id = "ddlYear" + index;
cell1.appendChild(t1);
for (var i = 1975; i <= 2015; i++) {
opt = document.createElement("option");
opt.value = i;
opt.text = i;
t1.add(opt);
t1.style.width = "155px";
var cell2 = row.insertCell(1);
t2 = document.createElement("Select");
t2.options[t2.options.length]=new Option('--Select--','0');
t2.options[t2.options.length]=new Option('State Board','1');
t2.options[t2.options.length]=new Option('CBSE','2');
t2.options[t2.options.length]=new Option('ICSE','3');
t2.options[t2.options.length] = new Option('Others', '4');
t2.style.width = "155px";
t2.id = "ddlCourse" + index;
cell2.appendChild(t2);
var cell3 = row.insertCell(2);
t3 = document.createElement("input");
t3.id = "txtCity" + index;
cell3.appendChild(t3);
var cell4 = row.insertCell(3);
t4 = document.createElement("input");
t4.id = "txtInstitute" + index;
cell4.appendChild(t4);
var cell5 = row.insertCell(4);
t5 = document.createElement("Select");
t5.options[t5.options.length] = new Option('--Select--', '0');
t5.options[t5.options.length] = new Option('English', '1');
t5.options[t5.options.length] = new Option('Hindi', '2');
t5.options[t5.options.length] = new Option('Telugu', '3');
t5.options[t5.options.length] = new Option('Others', '4');
t5.style.width = "155px";
t5.id = "ddlMedium" + index;
cell5.appendChild(t5);
var cell6 = row.insertCell(5);
t6 = document.createElement("input");
t6.id = "txtSpecialization" + index;
cell6.appendChild(t6);
var cell7 = row.insertCell(6);
t7 = document.createElement("input");
t7.id = "txtFnl" + index;
cell7.appendChild(t7);
index++;
function DeleteRow(index) {
var table = document.getElementById("myTable");
table.deleteRow(index);
// if (index = 2) { alert("There is no rows added.Please add the new row"); }
Design:
<tr style="font-size: 12pt" id="trSecond" runat="server">
<td colspan="3">
<table id="myTable" width="100%" border="0">
</table>
<tr>
<td colspan="3" align="right">
<input type="button" title="Add" value="Add" onclick="insertRow();" />
<input type="button" id="deleteRow" title="Delete" value="Delete Row" onclick="DeleteRow(this);" style="display:none" />
</td>
</tr>
Thank you.

Put the button click into an action listener and build the new frame there. The code I have below isn't exactly what you're doing (it's amazingly oversimplified), but it's probably similar enough to get your wheels turning in the right direction.
import java.awt.*;
import javax.swing.*;
import java.awt.event.*;
public class sample
     public static void main(String[] args)
          JFrame frame = new JFrame("Sample");
          frame.setSize(400,400);
          Container content = frame.getContentPane();
          content.setLayout(new FlowLayout());
          frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
          final JTextField text = new JTextField(10);
          content.add(text);
          JButton button = new JButton("Send");
          content.add(button);
          frame.setVisible(true);
          button.addActionListener(new ActionListener()
               public void actionPerformed(ActionEvent ae)
                    JFrame myframe = new JFrame("Results");
                    myframe.setSize(200,200);
                    Container mycontent = myframe.getContentPane();
                    mycontent.setLayout(new FlowLayout());
                    String mytext = text.getText();
                    JLabel label = new JLabel();
                    label.setText(String.valueOf(mytext));
                    mycontent.add(label);
                    myframe.setVisible(true);
}

How to maintain schedule invoice print date

Hi everyone,
Could anybody please guide me how can we maintain schedule invoice print date in table te417.
Or, please guide how this field gets maintained?
Thanks and Regards
Edited by: MP Vashishth on Aug 12, 2009 11:36 AM

hi,
scheduled print invoice date is maintained in 'portion' which is part of the scheduling setup.
scheduling helps in generate dates for meter reading, billing, and budget billing plans etc.
in portion we give some date in the following fields.
end of billing period--Date by which the portion must be billed .
allocation date of billing--used to allocate billing statistically.
scheduled billing date-Date on which the billing of contracts belonging to a portion is to be started
scheduled print invoicing date--date on which printout should be generated.
all these date are important as they help to generate schedule records for billing and invoicing.
the end of billing date should be after scheduled billing date i.e this should be last date
order of dates scheduled billing date 21042008
scheduled print date 25042008
end of billing date 30042008
table te417 stores the schedule records which are created for the portion one has made.
kindly go thr this link for more info.
http://help.sap.com/saphelp_utilities472/helpdata/en/8e/1f6c35d212da41e10000009b38f839/frameset.htm
revert back for more clarifications.
cheers,
Rakesh..

How can I modify data from a Transparent Table without ABAP code.

Hi,All
How can I modify data from a Transparent Table (like TCURR), and important thing is I want do all that with no ABAP code here. It is like that we always do that in a Oracle database use TOAD or PLSQL third party tools, with no script code here.
I had fond that there is a way can do that:
1, type 'se11',and Display Database table 'TCURR', click Contents, then click Execute to display all data
2, type '/h' and let debugging on
3, select one of this data then click 'Display',enter in debugging system.
4, then make a breakpoint in the code. But... display a dialog let I type a 'ABAP Cmnds', I want to know what can be type in for that?
and, My system is ECC6.
thank you all
Edited by: xuehui li on Aug 20, 2008 6:30 PM

Hello,
Your approach (with Vijay's suggestion) MAY work. However, depending on how tight security is at the company that you are working at you may or may not be able to acutaly change the value of the SHOW field to EDIT. This will be especially true if you are working in a Production environment. Vijay's other comment is true as well. This is not a recommended approach to change data (especially data with a financial impact like TCURR) in a production environment. The auditors will not be impressed.
Explore the option of a maintenace view or look at tcode TBDM to upload a file which includes daily rates from providers like Reuters or try tcode s_bce_68000174 which is a maintenance view on TCURR.
Regards
Greg Kern

How to input data in a database table without knowing in advance table and column configurations

Hi,
I have a problem using LabVIEW for input data (manually) in a SQL database. I have about 40 tables in the database, each of them is related to a specific engine component. I need to create a user interface (maybe visualizing the table with a table control) where the users can insert data in the database table fields. Could someone give me some suggestion on how to do it?
Using the DB tools insert data.vi I need to know in advance the column configuration of the table, but in my database each table has its own structure! So do I have to create 40 different masks, one for every different table?
Thanks in advance.
Michela

I have not actually used the LV SQL Toolkit, but I will try and offer high level ideas :-)
when you have retrieved the construction data for a table, you should be able to use array and cluster indexing to aquire the names of the fieds, enough to create a labelled table on the LV Front panel.
After completing a new entry you can INSERT the entry into the database using the same data.
Is the SQL toolkit an additional purchase, or included in newer versions as standard? If you post a sample of the cluster/array that you retrieve, I could give you a sample VI to give you some pointers in creating the User Interface table
- Cheers, Ed

How to delete or Update the data in the MEAN table

Hello Gurus,
I would like to delete or update the data in the MEAN table...how to do it.
Precisely I would like to change the status of Main EAN Indicator (field HPEAN).
Kindly let me know ??
Rehards
Senthilll

programmatically, you may use [BAPI_MATERIAL_SAVEDATA|https://www.sdn.sap.com/irj/scn/advancedsearch?query=bapi_material_savedata&cat=sdn_all] [EAN|https://www.sdn.sap.com/irj/scn/advancedsearch?cat=sdn_all&query=bapi_material_savedata+ean&adv=false&sortby=cm_rnd_rankvalue]
Regards,
Raymond

How to select set of unique data records from internal table

Hi
I am looking for a command in order to select all unique data-records from an internal table without using a loop. Does anybody know a command that could do this?
<b><u>An illustrating example:</u></b>
<i>Example:
Table content
a 1
a 2
a 3
b 1
b 2
c 1
c 2
c 3
d 1</i>
So I am looking for a command that should provide a, b, c & d for the first column or 1, 2 & 3 for the second column<b></b>

Hi,
SELECT DISTINCT MATNR
FROM MARA
into table i_mara.
Best regards,
Prashant

How to change font while displaying data through an ALV table in WDA?

Hi all,
I am displaying data through and ALV table. Now I want to change the FONT only for few rows. Is this possible?
If so then do the needful to me..
Thanks & Regards,
Yugesh A.

I believe as you have found 'LVC_FIELDCATALOG_MERGE' would only work with the classic dynpro (SAPGUI based) version of the ALV.
You won't be able to control the font the same way in the WDA version of the ALV. You will need to create a custom cell editor for the column(s) in question. You can then bind context attributes to the properties of the cell editor. You will need extra attributes in your bound context to control these settings on the row level. Also you will be restricted by the changing the DESIGN property. This means only the values allowed for the DESIGN of the particluar UI element. For a TextView that wouldn't be the font directly (the font of course comes from the Theme).
DATA l_salv_wd_table TYPE REF TO iwci_salv_wd_table.
l_salv_wd_table = wd_this->wd_cpifc_alv_adv( ).
DATA l_table TYPE REF TO cl_salv_wd_config_table.
l_table = l_salv_wd_table->get_model( ).
data textview type ref to CL_SALV_WD_UIE_TEXT_VIEW.
l_column = l_table->if_salv_wd_column_settings~get_column( 'ADD_PARTICIPANTS' ).
create object textview.
textview->SET_TEXT_FIELDNAME( 'ADD_PARTICIPANTS' ).
textview->set_design_fieldname( 'ADD_DESIGN' ).
textview->set_wrapping( abap_true ).
l_column->set_cell_editor( textview ).
DESIGN supports the following options:
Value
Visual Display
Description
emphasized
Text is highlighted in default size
groupTitle
Header for forms
This enumeration value is deprecated. Instead, use SectionHeader.
header1
Text is highlighted with font size +4 in relation to the default font size.
header2
Text is highlighted with font size +5.08 cm relation to the default font size.
header3
Text is highlighted in default size
header4
Text is highlighted in font size -1 (small) in relation to the default font size (like the legend but highlighted)
label
Text is display in the default font type. A space is always inserted after the text.
label_small
Text is displayed in default font type, as with label, onyl that font size is -1 (like the font size for header4).
legend
Text is displayed with default font type in size -1.
reference
Text is in italics and in default font size.
standard
Text is displayed in default font size. No text attributes are defined for this value.
monospace
Text is displayed in no-proportional font type. Each letter takes up the same space.

Data fetch from two table without refresh

hi Friends,
I have a problem i want to extract data from two table without refresh into text field when i'll enter any value in a text field then corressponding value should come in to corressponding textfield.
eg. there two table A and B.
Table A has Colunm
s_id Number;
c_id Varchar2(30);
sec varchar2(4);
Second Table B Colunm Name
s_id Number;
f_name varchar(30);
l_name varchar(20);
when i enter s_id 101 in a text field then the c_id ,sec,first_name and last_name should come in to corressponding text fields without refresh.
How Can I do this.
Thanks
Manoj

Hi Manoj,
You have to make an Ajax call to display data without refreshing the page. Search this forum for Ajax and you can find lots of related posts. This link might help too. http://www.dba-oracle.com/t_html_db_apex_ajax_application_express.htm
Thanks,
Manish.

How to Maintain Surrogate Key Mapping (cross-reference) for Dimension Tables

Hi,
What would be the best approach on ODI to implement the Surrogate Key Mapping Table on the STG layer according to Kimball's technique:
"Surrogate key mapping tables are designed to map natural keys from the disparate source systems to their master data warehouse surrogate key. Mapping tables are an efficient way to maintain surrogate keys in your data warehouse. These compact tables are designed for high-speed processing. Mapping tables contain only the most current value of a surrogate key— used to populate a dimension—and the natural key from the source system. Since the same dimension can have many sources, a mapping table contains a natural key column for each of its sources.
Mapping tables can be equally effective if they are stored in a database or on the file system. The advantage of using a database for mapping tables is that you can utilize the database sequence generator to create new surrogate keys. And also, when indexed properly, mapping tables in a database are very efficient during key value lookups."
We have a requirement to implement cross-reference mapping tables with Natural and Surrogate Keys for each dimension table. These mappings tables will be populated automatically (only inserts) during the E-LT execution, right after inserting into the dimension table.
Someone have any idea on how to implement this on ODI?
Thanks,
Danilo

Hi,
first of all please avoid bolding something. After this according Kimball (if i remember well) is a 1:1 mapping, so no-surrogate key.
After that personally you could use Lookup Table
http://www.odigurus.com/2012/02/lookup-transformation-using-odi.html
or make a simple outer join filtering by your "Active_Flag" column (remember that this filter need to be inside your outer join).
Let us know
Francesco

How do I get the encashment date to populate in table PAYR when using FB05

All,
The client here is using transaction FCKR to upload their checks for posting. The process submits transaction FB05 which works for everything except the encashment date, which is not being populated on table PAYR. I have walked through the transaction BDC session (I am am ABAP developer) and cannot see the field on any of the screens. I am hoping there is some configuration which needs to be done to populate this field ... along that line I have read some of the postings about algorithms 11, 12, and 13 which will use the value(ation) date (I do see that on the FB05 screen) but I do not know how to find them or make them work, if indeed that is what I need to do.
Any help would be greatly appreciated. Also, I am an ABAP developer working at a small client where SAP was implemented about 2 years ago so we are working through the learning curve together.
Thanks for any help you can provide.

Ramesh,
Thank you for responding.
Unfortunately, I am an ABAP developer and do not know FI. I have asked several of the people here if they know where to find the information you point to, but they do not know either. (As I said, we are all learning together.)
How do I find the status group? Menu paths or transactions would be very helpful.
Micah

How to maintain 7.2 milion data in heap organized table without partition

Similar Messages

Maybe you are looking for