How to maintain the Alert History by using OWN Tables
Hi,
In BAM defalut alert "History" table having limited number of columns.
But i want to maintain more informations about alerts so is there any other way to maintain the by using OWN alert history Table.
Thanks and Regards,
kash
No you cannot maintain your own history tble.
The only columns available are the ones displayed in the alert history data object.
Apart from this no other information will be available.
Alternatively you can create another Data object and create a look up field pointing towards the alert history label based on a particular key.
If the key matches then the data from the alert history DO will be pulled into this DO.
To this DO you can add your own columns and populate them with your own data.
Similar Messages
-
Quick question: How to get the scrolled page number using af:table
Hi,
When using range paging on scrolled table, how to get the current scrolled page number(1,2,3...), for example when moving the table vertical scroll bar forward or backward, is there any method in ViewObjectImpl class that I can use to get such information? I have seen the method scrollToRangePage(int i), but when scrolled ("Fetching data..."), it doesn't not get into this method. So it is wrong usage for this method, right?
ThanksDidn't you just ask that question in this thread?: How to catch the page number when using scroll table in ADF 11g?
A bit of patience might be in order.
CM. -
How to maintain format in html email using the send email....
Does anyone know how to maintain the format in a HTML email using the Send E-mail To Recipients From Recordset behavior?
When text only is selected instead of HTML text on the Options tab the format of the input is maintained, but when HTML text is selected the email has no format. I have tried to use a replace \n with
as I have done when hand coding PHP, BUT I am trying to learn to use ADDT. I also tried to use a Custom trigger without success.
Help!Hi Dave,
in my snippets folder I have this thing which I found on the old MX Kollection forums and which was suggested by the Interakt staff:
//trigger SendEmail (write content)
function Trigger_SendEmail(&$tNG) {
ob_start();
include("myDynamicContentFile.php");
$mailcontent = ob_get_contents();
ob_end_clean();
$emailObj = new tNG_Email($tNG);
$emailObj->setTo("[email protected]");
$emailObj->setFrom("[email protected]");
$emailObj->setSubject("A new User was added");
$emailObj->setContent($mailcontent);
$emailObj->setEncoding("UTF-8");
$emailObj->setFormat("text");
$emailObj->setImportance("Low");
return $emailObj->Execute();
//trigger SendEmail (write content)
The only modification is the possibility to include a dynamic PHP file rather than some static text or a HTML file which will also render textarea contents on one line:
ob_start();
include("myDynamicContentFile.php");
$mailcontent = ob_get_contents();
ob_end_clean();
That said, it should be possible to define all the "rendering" options in the external PHP file, what would mean to apply the nl2br function there, e.g.: nl2br($row_queryname['columnname'])
What I´m not sue about is, if you will have to strip the external file´s head and body tags before it´s getting included -- however, please give this a try and tell us how it worked.
Cheers,
Günter Schenk
Adobe Community Expert, Dreamweaver -
How to maintained the Text language for CKF keyfigure
Dear All,
Please let me know how to maintained the text language for CKF I am using only keyfigures in CKF.
Issue is text is not showing in Spain language when user exeuted the report (longin Spain) for CKF keyfigures .
As per report design there are formuals and direct keyfigures and CKF has defined and we keep it under in Row struture in the report.
After exeuted the report (Login Spain)Text has converted in all languages along with spain except for CKF keyfigures.
Issue in text CKF's:
There is a main CKF (Cost) under this again we defined two sub CKF's those are total cost and average cost. We able to see the text in Spain language for Main CKF(cost) and also cheked in RSZELTTXT(Texts of reporting component elements) for the same.
We can able to see the text in all languages for main CKF(cost) and enteries are there in RSZELTTXT table.
We can see only the text in english for total cost and average cost and also enteris are there only in EN in RSZELTTXT table.
It would help to me if any one can answer my question.
Thanks in advance .
Regards,
MQU can fetch the texts for the items using
Read_text.
Example:
g_f_tdname = xvttp-vbeln.
g_f_obj = p_obj.
g_f_langu = 'DE'.
REFRESH g_t_lines.
CLEAR g_t_lines.
CALL FUNCTION 'READ_TEXT'
EXPORTING
id = p_var
language = g_f_langu
name = g_f_tdname
object = g_f_obj
TABLES
lines = g_t_lines
EXCEPTIONS
id = 1
language = 2
name = 3
not_found = 4
object = 5
reference_check = 6
wrong_access_to_archive = 7
OTHERS = 8.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
The Required fields are,
Text-id ,language,name,object.
Let me know if you further require help.
Regards -
How to Maintain the Pricing Condition Records in CRM
Hi
I am new to the CRM
How to maintain the pricing condition records in crm for the particular condition type?
as we do in SD(VK11)
ThanksHi Binu,
First of all, you could maintain pricing conditions in the following places:
1. In General Condition Maintenance (GCM)
2. At the product maintenance level
3. At the 'Price agreement' tab of Contracts
4. As manual conditions during order processing at item level
Now, if you want to maintain conditions using GCM, you first have to maintain a condition maintenance group in the customizing where in you can assign condition table and condition type for different counter values. I am assuming that you have done this activity successfully.
When you run the transaction '/SAPCND/GCM', for application 'CRM', your condition maintenance group name and context 'GCM', you will be initially taken to a screen where in you'll have an item area which would be blank and then condition fields would be displayed in a tree on the left.
Here, select the field 'Condition type' and click on icon 'Select records'. You would get a dialog prompting you to enter condition type. Here you can specifiy the condition type for which you want to maintain/view condition records.
If no condition records are available, item area would be left blank. Here, you can choose a condition type using the standard F4 help. Depending on condition types that are assigned to condition maintenance group, different condition types would be displayed in the F4-help using which you can maintain condition records.
Hope this helps.
Regards,
Pavithra
**PS: Please reward points if this helps. -
Validation: How to maintain the entry in GB02C
HI FI GURUS n EXPERTS,
My requirement is that - We want to restrict Negative posting for some GL i.e. For some GL balance should not be Zero.
When I have made the search on SDN, I found it can be done with the help of Validation: OB28 & GGB0.
Currently we are not using any validation. When we use T-Code GGB0 --> Financial Accounting --> Line Item --> New Validation
System shows a pop-up window to select Boolean Class & Message ID.
I also found that this information is maintained in Table GB02C.
When I use Se16 to see the detail of the table GB02C, I found there is only one entry Bool. Class: FP1 & Message ID 7F.
But I don't know How to maintain the entry in table GB02C & What is the T-Code for it. which message ID I have to create.
Please help.
DSCDear Alex,
When I use: GGB0 --> Financial Accounting --> Line Item --> New Validation
System shows a pop-up window to select Boolean Class & Message Class, I select the Message Class 9 and for Message Class Press F4 and select any message class. System gives an error message: Message ID must start with 'Z' Message no. GB116.
Basically, My question is that: Which T-Code we have to use to maintain Boolean Class & Message Class.
With thanks,
DSC -
How to download the log history for batch session?
Anyone know how to download the log history from SM35?
Hi ONG ,
first u have to get the Q.ID , then u can use there Fms to get the Log of Sessions.
CALL FUNCTION 'RSTS_OPEN_RLC'
EXPORTING
NAME = LOG_NAME
CLIENT = LOG_CLIENT
AUTHORITY = 'BATCH'
PROM = 'I'
RECTYP = 'VNL '
EXCEPTIONS
FB_CALL_HANDLE = 4
FB_ERROR = 8
FB_RSTS_NOCONV = 12
FB_RSTS_OTHER = 16
NO_OBJECT = 20
OTHERS = 24.
CALL FUNCTION 'RSTS_READ'
TABLES
DATATAB = LOG_TABLE
EXCEPTIONS
FB_CALL_HANDLE = 4
FB_ERROR = 8
FB_RSTS_NOCONV = 12
FB_RSTS_OTHER = 16
OTHERS = 16.
CALL FUNCTION 'RSTS_CLOSE'
EXCEPTIONS
OTHERS = 4.
<b>check the same steps how sap doing in SM35P</b>
Regards
Prabhu
Message was edited by: Prabhu Peram -
How to maintain the data in the view cluster
we are doing upgrade, we have one view cluster app_log in this object scwb
and subobjects is swtlo1,02,03 like i have some subobjects in 4.6c we transported the view cluster to ecc6.0 in ecc 6.0 i have object scwb but subobjects doesn't exist how to maintain the subobjects in view cluster.Definition
A view cluster is a group of maintenance dialogs which are collected in one maintenance unit for business or technical reasons. They allow related data in more than one table/view to be maintained consistently.
Use
Whereas only 1:1 relationships can be processed in maintenance views (except for language-dependent texts), key extensions and relationships of cardinality N:M can also be handled in view clusters. Maintenance dialogs with no key, or partial key-dependence, can also be combined into view clusters.
Grouping dialogs into one maintenance unit has the following advantages for data maintenance:
Navigation: A view cluster contains convenient standard navigation between the individual maintenance dialogs. This simplifies the maintenance of the data in a view cluster.
Consistency: The view cluster ensures data consistency when deleting, copying, saving, retrieving and manually transporting data. For example when an entry in a higher-level view is deleted, , it automatically ensures that all dependent entries in lower-level views are also deleted.
You can first split tables with a lot of fields into various views and then collect them into a view cluster.
Use tabs to format very wide tables with a lot of fields.
Structure
Navigation in a view cluster is usually based on the hierarchy of the tables/views on which the dialogs are based. A view cluster usually consists of one or more root dialogs and the at most 14 maintenance dialogs which depend on them. A view at a lower level has one or more additional fields in its key compared its higher-level view. Each data record at the higher level has several dependent data records below it.
Each maintenance dialog is an independent unit consisting of an overview screen or an overview and a detail screen, depending on the dialog type. As well as the data to be maintained, the overview screen contains a navigation area, in which you can go to higher or lower level maintenance dialogs.
One-level maintenance dialogs only contain one screen, the list screen, in which all existing data records are displayed in a table. In a two-level maintenance dialog, double-clicking on a data record in the list screen takes you to the detail screen, which displays all the fields in the selected data record.
Generate a maintenance dialog for each view before you call the cluster maintenance (SM34). When you generate the maintenance dialog, flag the key fields which are identical in the view and its higher-level in the cluster, with the maintenance attribute S. The system fills the key fields when you go from the upper to the lower level, with the values of the data record selected in the upper level. Go to the transaction SE54 to define a view cluster.
<b>Rewards point if useful.......</b>
regards....
Abhaysingh. -
How to maintain the characterstics of the values tab of limits maintain.
Hi SAP ALL,
Hi how to maintain the characterstics point of valu scales maintain activally i want the P R release authorsiation limit increase.
ThnaksThe Class Type of PR & PO Release is 032 and for Class Go to SPRO-MM-Purchasing-Purchase Order-Release Procedure-Release Strategies and Here you will find the Class.
Else Go to Release Strategies-classification using the same above path and Change the Chareceteristic Values and Save.
Regards,
Ashok -
How to maintain the status of the Thread ?
How to maintain the status of the Thread ?
namancI want to know whether a particular thread (java
application) is completed successfully or not ...
If the thread is not completed successfully then I
want to restart the Thread.
Actually this is the Task Scheduler Application ...
If the particular task is not running successfully
then I want to start the Task again ...
namancThen it could look something like this: // loading the queue
for each task
add task to list of incomplete tasks
enqueue task in work queue
// dispatcher
while !done()
task = workQueue.dequeue();
New Thread(task).start();When a task finishes, it can call a callback method on the dispatcher. The dispatcher looks at the task's status. If it finished successfully, the task gets removed from the list of incomplete tasks. Else it goes back on the work queue.
There will be some syncing issues involved. You'll have to use wait() and notify()/notifyAll() to handle the situation where the work queue is empty, and all incomplete tasks are being worked on. And the case where the dispatcher wakes up after the notifyAll() and there's nothing to dequeue and nothing in the list of incomplete tasks.
Clearly it needs some fine tuning, but I hope you get the idea. -
How to have the Chat history without the Exchange server?
How to have the Chat history without the Exchange server?
Hi,
You can try Archiving server. Archiving is the storing of IM and conferencing data in an SQL backend database. This data is not instantly readable / searchable. The Lync users are not able to read it directly. The admin can export the data using Lync powershell
and then convert it into a readable format.
Kent Huang
TechNet Community Support -
How to set the full screen mode using setClip method
hi all,
how to set the full screen mode using setClip in that softkeys should not be used insteat on that need to create a own softkeys using commands.
thanks & regards
Bala.In CS5 there are changes made to how the screen mode is reported. In CS3-CS5 the screen mode has a corresponding number. So for instance if the ScreenMode is set to "Preview Off" and you ask indesign CS3 or CS4 to display the screen mode, it will report "1936552047", while in CS5 it will report "PREVIEW_OFF".
try executing this simple command in respectively CS3, CS4 and CS5 and you will see what I am talking about:
alert(app.activeWindow.screenMode);
there is no difference if you do:
alert(app.activeDocument.layoutWindows[0].screenMode);
The CS5 solution is rather awkward to work with, unless I am missing something? PREVIEW_OFF is not a string, nor is it a number.
Example - doing:
myScreenMode=app.activeDocument.layoutWindows[0].screenMode;
and then trying to reset screenMode by something like:
app.activeDocument.layoutWindows[0].screenMode= myScreenMode
does not work in CS5 of course. It will throw an error. Neither will this line work:
app.activeDocument.layoutWindows[0].screenMode=ScreenModeOptions.myScreenMode;
Any way of working around this? -
Hi Team,
I am doing database Refreshment. I want to monitor the alert logs.
Please suggest me, How to open the alert logs. Working on unix server.
Thanks & Regards,if its 10g then go to bdump directory
you can either do tail -f <alert_log_name>
or vi <alert_log_name>
if 11g then you want should go to
$ORACLE_HOME/diag/$ORACLE_SID
the alert log file is in XML format as well as a text file. The default location of both these files is the new ADR home or Automatic Diagnostic Respository. The ADR is set by using the DIAGNOSTIC_DEST initialization parameter. The location of an ADR home is ADR_BASE/diag/product_type/product_id/instance_id. If the environment variable ORACLE_BASE is not set then DIAGNOSTIC_DEST is set to ORACLE_HOME/log
there are different directories for different types of alert log files
alert - The XML formatted alertlog
trace - text alert log -
How to maintain the dynamic description for a workitem ?
Hi everyone ,
How to maintain the dynamic description for a workitem ?
Thanks ,
Naval BhattOPen PFTC Txn
Enter the TAsk ID and openit in change mode
declare a container element in the task container and the same element in the workflow too.
Now from the workflow pass the value to the task container by using binding.
and in the workitem text of the task conatiner.
For e;g
if you want to display the workitem id in the task decription
open the task in the pftc and add the element in the workitem text and then pass the element value , so that the value that you have passed will be displayed in the workitem text.
*&WORKITEMID& Add * -
How to remove the job history on P1102W
Hi, may i know how to clear the job history on the e Print? i'm using P110w. Besides, is there any max space to keep the job history?
Hello ccyee425,
The is no way unfortunatly To clear your Job history.
but it does after a month or so, Clear out and only show recent jobs and so on
I am an HP employee.
__ if this Solution has helped Please Mark as Resolved and feel free to Provide a Kudos__
Maybe you are looking for
-
How can I get current Number file name in a cell ?
I want to write current Number (3.5) file name in a cell. It was working in previous version of Number but not with latest one. Thanks.
-
Meeting Forward Notification issue: server sends multiple MFNs to organizer
Hi, Exchange 2013 CU7 on Server 2012 R2. We have separated the roles into mailbox server and front end. Mailbox servers are installed on physical servers, front end is virtualized. We still have Exchange 2007 SP3 Rollup 10 in the environment but no
-
Teaming with Windows 2012 DC (Datacenter Edition) Hyper V Host servers
HI We are preparing 2 Windows 2012 R2 DC edition servers, each of them has 4 NICs, planning to configure both HV host and guest clustering. One NIC will be used for host / HV management and Host cluster traffic, other 3 NICs will be configured in a s
-
Missing stars when importing edited images from Bridge - why?
Why do my previously rated images from Bridge appear without the stars after conversion to DNG and importation into Lightroom? I am having to use the "Update DNG Preview and Metadata" under the Metadata menu to see the stars again. I thought with CS3
-
Can someone please vectorize the following image :)
Hello. I was wondering if anyone could vectorize the following image and upload it as an .ai file? It's going to be a vital part of a birthday present for a friend, but I need to upscale it to a bigger proportion; however, the current image is a .pn