How to maintain the data in the view cluster

we are doing upgrade, we have one view cluster app_log in this object scwb
and subobjects is swtlo1,02,03 like i have some subobjects in 4.6c we transported the view cluster to ecc6.0 in ecc 6.0 i have object scwb but subobjects doesn't exist how to maintain the subobjects in view cluster.

Definition
A view cluster is a group of maintenance dialogs which are collected in one maintenance unit for business or technical reasons. They allow related data in more than one table/view to be maintained consistently.
Use
Whereas only 1:1 relationships can be processed in maintenance views (except for language-dependent texts), key extensions and relationships of cardinality N:M can also be handled in view clusters. Maintenance dialogs with no key, or partial key-dependence, can also be combined into view clusters.
Grouping dialogs into one maintenance unit has the following advantages for data maintenance:
Navigation: A view cluster contains convenient standard navigation between the individual maintenance dialogs. This simplifies the maintenance of the data in a view cluster.
Consistency: The view cluster ensures data consistency when deleting, copying, saving, retrieving and manually transporting data. For example when an entry in a higher-level view is deleted, , it automatically ensures that all dependent entries in lower-level views are also deleted.
You can first split tables with a lot of fields into various views and then collect them into a view cluster.
Use tabs to format very wide tables with a lot of fields.
Structure
Navigation in a view cluster is usually based on the hierarchy of the tables/views on which the dialogs are based. A view cluster usually consists of one or more root dialogs and the at most 14 maintenance dialogs which depend on them. A view at a lower level has one or more additional fields in its key compared its higher-level view. Each data record at the higher level has several dependent data records below it.
Each maintenance dialog is an independent unit consisting of an overview screen or an overview and a detail screen, depending on the dialog type. As well as the data to be maintained, the overview screen contains a navigation area, in which you can go to higher or lower level maintenance dialogs.
One-level maintenance dialogs only contain one screen, the list screen, in which all existing data records are displayed in a table. In a two-level maintenance dialog, double-clicking on a data record in the list screen takes you to the detail screen, which displays all the fields in the selected data record.
Generate a maintenance dialog for each view before you call the cluster maintenance (SM34). When you generate the maintenance dialog, flag the key fields which are identical in the view and its higher-level in the cluster, with the maintenance attribute S. The system fills the key fields when you go from the upper to the lower level, with the values of the data record selected in the upper level. Go to the transaction SE54 to define a view cluster.
<b>Rewards point if useful.......</b>
regards....
Abhaysingh.

Similar Messages

How to view the date when the Customers credit limit updated in SAP-FSCM?

How to view the date when the Customers credit limit updated in SAP-FSCM?

OK you can look at field - LIMIT_CHG_DATE in the table - UKMBP_CMS_SGM via SE16
I would assume you would want to run it based on a date range.

How to cache the data of a view?

Hi all,
I have problem on saving the data of a view object.
Basiclly, I have a View1 which takes long time to generate from database, then I will do some query(max, group by, etc) over View1 to generate View2 multiple times based on different parameter.
I want to avoid executing View1 multiple times because it is very costly. Is there any way to achieve it?
I try Method1: put this View1 in database as a VIEW, and Method 2: generate an ADF View Object for View1. Both have to re-generate View 1 whenever I generate View2...
Thanks!

Thanks for the reply, Timo.
I am afraid that it is not possible to optimize the query. It takes long time because the query is based on the sale history of the whole year.
One way to achieve my goal is to create a table in database, insert the result of view1 into the table, then query over this table instead of View1.
But I am thinking if ADF has this functionality or not. I just found a view object API called setQueryMode, don't know if it helps or not.

How to binnding the data in the adobe interactive forms for making a table?

Hi, experts,
Function:
Through the sharing context node between adobe interactive form and a WDA for ABAP, display the data of the sflight_node in the ADOBE.
version:
Acrobat Reader 8.1.0
currently both of the SAP-ABA and SAP-BASIS SP level: 9
ADS : Successful.
The following is my action:
1.     Create a interface (Z_SFLIGHT_INTF) with a attribute node (SFLIGHT_NODE) that type is "sflight" using the transaction code "sfp"
2.     Create a form (Z_SFLIGHT_FORM) using the transaction code "sfp" with the interface Z_SFLIGHT_INTF.
3.     Trag the sflight_node in the Z_SFLIGHT_INTF to the form( Z_SFLIGHT_FORM).
4.     Open the layout tab in the form(Z_SFLIGHT_FORM), and create a table(table1). Click the table created just now, select the binding tab in the object tab, and in the Default Binding, select the SFLIGHT_NODE under the Z_SFLIGHT_FORM.
Problem 1:
Do you tell me whether is right for binding the context SFLIGHT_NODE using this way? If bind 3 context attributes in the sflight, how can I do it?
5.     Create a WDA for abap (ZZ_02_SFLIGHT), and create a view(MAINVIEW) using transaction code "se80" in the sap-gui with adobe interactive form. Set the templatesource(Z_SFLIGHT_FORM) in the adobe interactive form properties and saved, and then, datasource is "MAINVIEW_Z_SFLIGHT_FORM" automatically.
6.     But I only found the attribute SFLIGHT_NODE under the context node(Z_SFLIGHT_NODE), and I don't found the NODE ( SFLIGHT_NODE ) context in the context tab in the WDA for abap so that I don't set data to the context NODE (SFLIGHT_NODE).
Problem 2:
Do you tell me what can I do it so that I get the node SFLIGHT_NODE rather than attribute in the WDA for setting the data to the CONTEXT NODE (SFLIGHT_NODE)?
Thanks a lot.
Best regards,
Tao

Hi, experts,
You can reply back to me via e-mail if you think we should discuss this internally at [email protected] or [email protected]
Thanks a lot.
Best regards,
tao

How to export some data from the tables of an owner with integrity?

Hi to all,
How to export some data from the tables of an owner with integrity?
I want to bring some data from all tables in a single owner of the production database for development environment.
My initial requirements are: seeking information on company code (emp), contract status (status) and / or effective date of contract settlement (dt_liq_efetiva) - a small amount of data to developers.
These three fields are present in the main system table (the table of contracts). Then I thought about ...
- create a temporary table from the query results table to contract;
- and then use this temporary table as a reference to fetch the data in other tables of the owner while maintaining integrity. But how? I have not found the answer, because: what to do when not there is the possibility of a join between the contract and any other table?
I am considering the possibility of consulting the names of tables, foreign keys and columns above, and create dynamic SQL. Conceptually, something like:
select r.constraint_name "FK name",
r.table_name "FK table",
r.column_name "FK column",
up.constraint_name "Referencing name",
up.table_name "Referencing table",
up.column_name "Referencing column"
from all_cons_columns up
join all_cons_columns r
using (owner, position), (select r.owner,
r.constraint_name fk,
r.table_name table_fk,
r.r_constraint_name r,
up.table_name table_r
from all_constraints up, all_constraints r
where r.r_owner = up.owner
and r.r_constraint_name = up.constraint_name
and up.constraint_type in ('P', 'U')
and r.constraint_type = 'R'
and r.owner = 'OWNERNAME') aux
where r.constraint_name = aux.fk
and r.table_name = aux.table_fk
and up.constraint_name = aux.r
and up.table_name = aux.table_r;
-- + Dynamic SQL
If anyone has any suggestions and / or reuse code to me thank you very much!
After resolving this standoff intend to mount the inserts in utl_file by a table and create another program to read and play in the development environment.
Thinking...
Let's Share!
My thanks in advance,
Philips

Thanks, Peter.
Well, I am working with release 9.2.0.8.0. But the planning is migrate to 10g this year. So my questions are:
With Data Pump can export data just from tables owned for me (SCHEMAS = MYOWNER) parameterizing the volume of data (SAMPLE) and filters to table (QUERY), right? But parameterizing a contract table QUERY = "WHERE status NOT IN (2,6) ORDER BY contract ":
1º- the Data Pump automatically searches for related data in other tables in the owner? ex. parcel table has X records related (fk) with Y contracts not in (2,6): X * SAMPLE records will be randomly exported?
2º- for the tables without relation (fk) and which are within the owner (MYOWNER) the data is exported only based on the parameter SAMPLE?
Once again, thank you,
Philips
Reading Oracle Docs...

How to fetch the data & display the data if fields got the same name in alv

hi frnds, i need ur help.
how to fetch the data & display the data if fields got the same name in alv grid format.
thanks in advance,
Regards,
mahesh
9321043028

Refer the url :
http://abapexpert.blogspot.com/2007/07/sap-list-viewer-alv.html
Go thru the guide for OOPs based ALV.
Use SET_TABLE_FOR_FIRST_DISPLAY to display the table:
CALL METHOD grid->set_table_for_first_display
EXPORTING
I_STRUCTURE_NAME = 'SFLIGHT' Structure data
CHANGING
IT_OUTTAB = gt_sflight. Output table
You can also implement
Full Screen ALV, its quite easy. Just pass the output table to FM REUSE_ALV_GRID_DISPLAY.
For controlling and implementing the FS-ALV we have to concentrate on few of the components as follows :
1. Selection of data.
2. Prepare Layout of display list.
3. Event handling.
4. Export all the prepared data to REUSE_ALV_GRID_DISPLAY.
Regd,
Vishal

Get the data from the structure OR View

Hi All,
how wud i take data from the structure OR View? when i m writing the select query then its saying that its not defind in data dictionary.
I hav the requirement to develop a report for PM module..
in that i hav all structure like AFVGD,CAUFVD,PMCOEA...
Plz tel me how to write a select quary for this...

Hi,
You cannot select data from a structure.
A structure / work area contains data only at the run-time.
You can select data from views and tables.
The data you need to select will be in Database tables. All you need to do
is to find those table and select from there.
Let me know if you need further help.
Regards,
Rajat

How can I get the date of the next monday from the currentday?

How can I get the date of the next monday from current day? Please advice.
mayooran99

Hi mayooran,
Please try the following code
DateTime nextMonday = DateTime.Today.AddDays(((int)DateTime.Today.DayOfWeek - (int)DayOfWeek.Monday) + 7);
Best regards,
Kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to disply the input text box when the data in the table is empty

Hi,
I m using JDeveloper 11g 5.1.1.1 : How to display the Input text box when the data in the table is empty or by using the dual table.
Since there is no record in the table, screen is displying only the lable. not displying the Input text box.? Any property is there to enable?.
One more case i tried by using dual (eg Select '0' as name from dual) created one view object and dragged in the JSF screen as input combo box with list of values.
In this case also it is not displaying the combo box.Just displaying the Lable name and 0 only.
Regards
Bijesh K

Hi,
I didn,t get you.Could you please explain. I am not choosing the ADF table. Selecting and dragging ADF form only.
Regards
Bijesh K

Hallo My system runs slow. how can i reorganize the date, that the pc runs faster? In the window world i hade to delete some fils. how it work in the apple world?

Hallo My system runs slow. how can i reorganize the date, that the pc runs faster? In the window world i hade to delete some fils. how it work in the apple world?

See these:
Switching from Windows to Mac OS X,
Basic Tutorials on using a Mac,
Mac OS X keyboard shortcuts,
Anatomy of a Mac,
MacTips,
Switching to Mac Superguide, and
Switching to the Mac: The Missing Manual, Mountain Lion Edition.
Additionally, *Texas Mac Man* recommends:
Quick Assist,
Welcome to the Switch To A Mac Guides,
Take Control E-books, and
A guide for switching to a Mac.
Once you get familiar with the Mac, see:
Mac Maintenance Quick Assist,
Mac OS X speed FAQ,
Speeding up Macs,
How to Speed up Macs, ,
Macintosh OS X Routine Maintenance,
Essential Mac Maintenance: Get set up,
Essential Mac Maintenance: Rev up your routines,
Maintaining OS X,
Five Mac maintenance myths and
Myths of required versus not required maintenance for Mac OS X for information.

I moved some e-mailed pictures to my iphoto library and they have the date rightin the middle of the image..how do I get rid of the date?

Imoved some e-mailed photos to iphoto, but they come up showing the date in the middle of the image..how do I get rid of the date?

Thhere is no way that iPhoto did that - either source put the data on the photo, you used a photo editor to put it there or the receiving e-mail client is displaying it there - iPhoto has no capability to add any text including dates to a photo
iPhoto will display the date on an event while viewing photos if you have that option set in the preferences
LN

Couldnt see the data at the views in EBS

Hi ,
I am trying to get the data from a view(this view is a secure view, to see the data you should have to set the organization) from EBS but I couldnt see that data.What should I have to do to see the data?.I think I should have to set the client_info before to see the data but how?.Help needed
Thanks...

To see the data,I have to execute a script.So how can I set this code,when on connect to database?.

Why do we get the data from a view to a report.

hi
why do we get the data from a view to a report. is it possible to get the data from a view in all the cases?

hi Jyotssna,
Suppose you are planning to get the data from multiple tables then you got to specify seveal condtions and make use of joins which results in poor performance in fetching the data . In order to improve the performance we make use of views where the conditions of different tables are defined and the data is fetched accordingly.
Regards,
Santosh

Unfortunately, I lost by an update all the apps on my iPad 2. Now I can not pull the data from the cloud to my iPad. How is this possible?

Unfortunately, I lost by an update all the apps on my iPad 2. Now I can not pull the data from the cloud to my iPad. How is this possible?

If you just installed iCloud does that mean you updated the iOS that's running on your iPad? If so, you'll want to restore all the programs you have from the backup you hopefully made.
Refer to these articles for help.
iTunes: Backing up, updating, and restoring iOS software.
If you don't want to use iCloud, simply don't activate it.
You can also download the programs again.
If you live in a country that supports re-downloading apps then you can re-download them. You can refer to this article for more help.
Downloading past purchases from the App Store and iTunes Store
What to know if your country supports downloading past purchases?
iTunes in the Cloud Availability

How can I select a radio button in a table regarding the data in the cells?

Hi everyone
This is the issue: I need to select the RadioButton which is in a table with data related to transfers in the cells next to it, so I need to select the correct radio regarding the data next to it.
This is the whole process: First I go to the Add Recurring Transfer section and select the parameters of the transfer (Accounts, date, amount, months etc), then with VB code I capture those parameters from the page and store them into Global variables for further usage on my E-tester script.
Right after that I need to select the radiobutton regarding the data of the transfer that I already created in order to delete it or modify it (Please see Attachment selectradio1.jpg)
So How can I move along the table and compare each cell with the variables that I created with the transfer information, so when I finish comparing a row cell by cell and if all the comparison match well in that row, I could select the radiobutton of the row.
Note: Second Attachment selectradio2.jpg shows the source code of the table...If you need more info please let me know
Could you please help me with this problem?? I'm Kind of frustrated with this issue jejeje

Here is an example. I uploaded mock html so that you can actually try this code. I think this does exactly what you are asking.
Private Sub RSWVBAPage_afterPlay()
Dim tbl As HTMLTable
Dim tblRow As HTMLTableRow
Dim tblCell As HTMLTableCell
Dim strValue As String
Dim rButton As HTMLInputElement
' ******** This would be your global variable. I put this so that values are seperated by a semicolin you can use what ever format works for you.
strValue = "03/22/2008;03/22/2008;*************1977;*************1977;$25.25;Jan, Jun, Jul, Dec"
' Strip out the ; for inner text comparison
strValue = Replace(strValue, ";", "")
' This will get the table but can be modifoed to be more specific
Set tbl = RSWApp.om.FindElement(, "TABLE")
' This loops through all the rows in the table until a match to the strValue is found
' then clicks the radio button. Findelements allows you to specify a root element
' once the correct root row is found, FindElemets can get the correct radio button
For Each tblRow In tbl.rows
  If tblRow.innerText = strValue Then
    Set rButton = RSWApp.om.FindElement("account", "INPUT", "NAME", , , tblRow)
     rButton.click
   End If
Next
End Sub
I also uploaded the script I created. You should be able to run it and see how it works.
This should get you going.

How to maintain the data in the view cluster

Similar Messages

Maybe you are looking for