How to make a graph dynamic data driven? Plus some XML basics for Illustrator?

I need to make some graphs that are linked to a series of data through XML files (originally Excel) and create an indvidual document for each data set. They will be used for the web and print. Please advise.

Tis is what you can do you create say your chart or your data say in Excel and you export ast Tab Delineated Text.You can then import that data for a chart with the import chart feature it is the first icon on top of the chart data window then you can make the chart dynamic asa variable and capture the data set then import another chart's data as txt as you did before then capture that as a data set abnd so on if you have then ten data sets each one will correspond to the one you need you can name the data sets so you can easily call up the one you need.
I never made a chart in excel or imported such data before a few minutes ago nor have I a=ever made a variable of a chart but this all works pretty reasonably.
More advance than this I would have to experiement but you can export the variable libraries and open them in Illustrator and figure it out for a way to load or export the excel info so it opens as a chart in Illustratorbut Illustrators charts are kind of primitive so donot expect much without a script to help you.
Perhaps you can figure out an actiopn toautomate the process?

Similar Messages

How to make use of adjacent data elements within the same buffer

Hi,
         Does anyone know how to make use of adjacent data elements within the same buffer? To make my question clearly, I would like to give you an example. In my application, I set "sample to read" as 10 which means at each loop 10 data samples will be taken into a buffer. Now, what I would like to do is to do some calculations on adjacent data samples in same buffer. I tried to use "shift register" for this, but it seemed to me that it only can deal with the calculation between data from adjacent loops. In other words, it skips 9 data elements and take the 10th one for the calculation.
         Here I also attach my VI showing what I did.
    Thank you very much in advance,
                        Suksun
Attachments:
wheel_encoder_1.vi ‏98 KB

Hi Suksun,
      I hope you'll forgive me for distilling your code - mainly to understand it better. I tried to duplicate your logic exactly - which required reversing the "derivatives"-array before concatination with the current samples array. As in your code, the last velocity is being paired with the first position. If first velocity is really supposed to be paired with first position, just remove the "Reverse 1D Array" node.
cheers
Message Edited by Dynamik on 01-07-2006 03:17 AM
Message Edited by Dynamik on 01-07-2006 03:19 AM
When they give imbeciles handicap-parking, I won't have so far to walk!
Attachments:
encoder2.GIF ‏14 KB
encoder2.vi ‏102 KB

How to make the exchange of data between 2 while loop in real time

hello
I have 2 while loop
the 1st while loop includes the data acquisition program
the 2nd while loop includes the control program
my question is how to make the exchange of data between 2 while loop in real time
I tried with the local variable and direct wiring between the 2 while loop
it does not work (there is a delay)
Solved!
Go to Solution.

Bilalus,
Queues are only good to transfer data if your application isn't deterministic. Since you are using Real Time, I am assuming that your application requires determinism. If you are using Timed Loops and you use queues to transfer data between your loops, you are losing determinism. In this case, you need to use the RT FIFO functions.
Warm Regards,
William Fernandez
Applications Engineering
National Instruments

How to make linkage query In Data Model for search

I want to make an linkage query as a condition for my report in BI Publisher. how to make the linkage in Date Model ?

This is the forum for SQL Developer, not for general SQL or PL/SQL questions.
Please repost this in the SQL and PL/SQL forum.

How to make links in dynamic text?

Hi All,
I need to know how to make links in dynamic text. I have
created a
table to hold the dynamic copy, and the copy is added through
a CMS page
that I created. This Admin page is accessed through a
browser, and I
don't know how to attach a link to selected text within a
browser. Can
anyone point the way? It's probably so easy I'll feel dumb.
Thanks,
Brett

"Brett" <[email protected]> wrote in message
news:fpf7j6$23m$[email protected]..
> Thanks Hunter,
>
> Yes, I suppose a legend on the admin page would provide
a solution. And
> ultimately, if the client doesn't feel confident doing
writing the HTML
> they would have to pay me to do it for them. OK, that
works for me.
The only other thing might be to use something like FCK (or
one of the many
others... ContentSeed, I think is one Murray mentions often)
for the CMS,
that would give an easier option for the end user. WebAssist
has an
FCK-based plug-in called iRite that can give a more
wordprocessing-like feel
to the field (i.e., they could just highlight the text and
then click a
button to add the link).

How to make a graph inside a while loop maintain previous values

In the beginning I was trying to use an the XY Graph Express VI to create a plot of points. However, the graph is making a linear retrace between the first point of the new line, and the last point of the previous line. It then creates the new line as desired.
I have tried using a for loop with to bundle a cluster to the graph, but the graph resets the plot on each iteration (as expected) and I cannot find a way to make it maintain the previous data. I tried using shift registers but was unable to find out how to do this, and I have also tried bundling the cluster to an array, but cannot figure out how to make the cluster go to a 1D array of a cluster of 2 elements.
One option is having is finding a way to make it maintain previous data, but the preferred option is to make it create a new plot on each iteration so as to see the color change for each new plot.
Solved!
Go to Solution.
Attachments:
shift register attempt.JPG ‏64 KB
original attempt.JPG ‏42 KB
Output only current iteration data.JPG ‏86 KB

I'm taking a stab at this because I'm not exactly sure what you want. But I think it is what I have shown here. You need to use a shift register on your outter while loop as I have shown. Your image where you tried using a shift register shows a misunderstanding of shift registers and how they work though, so I would take a look at these tutorials.
CLA, LabVIEW Versions 2010-2013
Attachments:
plot with SR.png ‏29 KB

How do you save dynamic data type, from the DAQ assistant, for use in Excel or matlab?

Currently, I have the following basic VI setup to save Data from my PCI6221 Data Aquisition Card. The problem I'm having is I keep getting the last iteration of the while loop in the measurement file and that's pretty much it. When I try to index the data leaving the loop it gives me a 2D array of Data which cannot be input into the "Write to Measurement File" VI. How would I save this to a useful Data/time step format? I was wondering of a way to continuously collect the Data and then save it in a large measurement file that I would manipulate in Matlab/excel? Am I using the wrong type of loop for this application? I also noticed my Dynamic Data array consists of data, time, timestep and then a vector of the data taken. Is it possible to just get a vector of the time change per sample alongside the data? Sorry for the barrage of questions but any help would be greatly appreciated, and thanks in advance!
-Bryan
Attachments:
basic DAQ.vi ‏120 KB

There is a VI in the Express > Signal Manipulation palette called "From DDT" that lets you convert from the Dynamic Data Type to other data types that are more compatible with operations like File I/O....for instance, you could convert your DDT into a 2D array and use the Write To Spreadsheet File.vi. Just a thought...
-D
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman

How to make a form Dynamic(Serious Issue)

Hi,
I have a problem.
How to make an Interactive form Dynamic while saving it in NWDS(NetweaverDeveloperStudio).
Helpful answer is highly rewarded and Highly Appreciated.

Hello Sankar,
Do the following:
1) In your Adobe Livecycle Designer, Select, Edit > Form Properties, in the Default tab, set u201CPreview Typeu201D to u201CInteractive formu201D
2)
Assuming you are using Web Dynpro application, then do the following also:
Place the following code in the wdDoModifyView method of the View where the form is placed.
IWDInteractiveForm iForm1 = (IWDInteractiveForm) view.getElement("<name of your form here");
iForm1.setDynamicPDF(true);
Hope this helps,
Harman

How to make enhanced fields of data source delta enabled?

Hi ,
I have a scenario, in which we are using the DS 0CUSTOMER_ATTR to load the master data.There are some fields added to this data source but this fields are not delta enabled. I have tested these fields from R/3 side using BDCP, CDPOS tables. All the fields are writing the changes correctly. But when extracting them using delta they are not capturing.If we load the full,it is capturing all the changes.
So running full load every week is taking more time.
Can any one suggest how to make this fileds delta enabled to capture the change in BW side as well to extract only changed records?
Any help will be greatly appriciated !
Thanks & Regards,
Vishnu

HI,
It is not possible to load delta this data. Your datasource only detects changes in the customer table and when any customer has been modified the record is loaded to BW. In this moment the datasource fill the append extructure.
The problem is that if you modifies some record from the append extructure the datasources doesn't detects the changes. When you does a full load you are filling the append extructure for the entire records and it works.
If you want to catch this deltas you should make a delta datasource for CDPOS but depending on the number of records of the tables it won't be possible.
You could check if there is any event to detects the modification and create a delta queue datasource for the append extructure.
Then, you can mix both datasources in a DSO in BW.
You can look for a " how to create generic datasources which use delta queue"
I hope it helps

How to use Dynamic date calculation in some transactions.

Hello everyone.
I have to create some dynamic variants using the dynamic date calculation. The problem is that in some transactions it´s not possible to use some variables that can round a value. For example: in transaction /SAPAPO/MC90, I need to fix 3 months in the horizon like this: From date: 01.01.2009 To date 31.03.2009. The current month is 01.01.2009. Next month the current month will be february, so the horizon would be 01.02.2009 to 30.04.2009.
In 5.1 version, it´s impossible to fix the months, because the options that appear in the match code are:
Current Date
Current date +/- ??? days
current date +/- ??? work days
First day of current month
nth working day of current month
First day of next month
First day of previous month
Last day of previous month
Last Day of the Current Month
Does anybody knows how to do this? This is happening in other transactions to.
Thanks a lot
Regards
Angela

I am not sure where you are looking for..but here is what I can do it in MC90 Tcode:
1. when you try to save the variant, in the variant screen check the two boxes under "Current date" field for Selection Variables attributes "L"
2. Then click on Selection variables option and click on the "D" variable so that it turns to green
3. Drop down in the first current date field, select "Current +/- ??? days. here if you want to start from today's date maintain 0 days
4. In the second Current date field maintain 90 days in "Current +/- ??? days.
5. save it
please let me know if I misunderstod the issue

How to make reports based on Data block work on web?

I am using form 6i and oracle 9ias
I have successfully call the common reports from the form on the web using run_report_object, then web.show_documnet(..);
But when it come to the reports based on the data block from the form, it doesn't work. it always fetch all the records from the table which the data block is based
Anyone can tell me how to make that work?
thanks

I have successfully do this when I am running forms and >reports in localhostTell me how did you achieve this?
Did you have both Reports and Forms running under same oracle home?
and off course was it a clinet server architecture?
What version for Form and Reports did you use?
Which executables did you use and what was your call from forms? When you call from Forms, which Reports executable use to run the report?
The data integration can only be achive if both the product were running under same Oracle home and were in client server architecture. I do not think data integration is possible in web architecture.
Thanks
Rohit (Orcale Reports Team)

How can I change a dynamic data into an integer representation I32?

The result of formula box is a dynamic data. I need to change the representation into an integer representation I32. How can I do this?

The I32 conversion icon is in Functions Palette -> Numeric -> Conversion -> To Long Integer. Wire the formula output to the I32 input. The output will be of I32 type.
- tbob
Inventor of the WORM Global

How to make BI Info obj Data element in-herit source DE documntn?

Say I am in ECC. I go to SE11, give table name MARA and then doubleclick on the dataelement 'MATNR'. Then I click on documentation. I get a popup with Short text " Material Number" and Definition "Alphanumeric key uniquely identifying the material'.
I am interested in the latter information that is 'Definition' - & in general whatever documentation comes up for data element in ECC.CRM.SCM,SRM.
Now I log into SAP BI. I find that under characteristic 0Material, the data element is /BI0/oimaterial. When I double-click this datamaterial and press the documentation button, the system says 'No documentation'.
My Questions:
1. IS there a switch we could turn on in source ECC/SRM/CRM/SRM so that the data element in SAP BI inherits the original source field data element documentation.
{ I am not too convinced of the argument- that in BI we have info objects in ECC we have fields - since I am talking of data element level information- I would tend to think of this as an oversight of the designers or de-prioritization !!}.
2. Could we have an ABAP workaround? That is, in BI we identify the tables that house the mapping between the source and destination data elementsa and take out this information. Then we extract the dataelement documentation by function DOCU_GET (from eCC) and use the mapping info above to link SAP BI data element with source data element documentation.
WHY do I want to punish myself as above? My use case is, we take out SAP BI Table, field, metadata etc and create a model in a modeling tool and physical implementation in a 3rd party DW database as our own canonical, application-agnostic corporate datawarehouse. I would want the source data element documentation to flow to this last system as well as the modeling tool.
Regards
Sasanka

That is, in BI we identify the tables that house the mapping between the source and destination data elementsa and take out this information. Then we extract the dataelement documentation by function DOCU_GET (from eCC) and use the mapping info above to link SAP BI data element with source data element documentation.
1) SAP don't supply this, I would imagine, because R/3 isn't the only possible source of data. I'm currently working on an app that extracts from R/3, an Oracle database and APO. From whence should I take the documentation for my MATERIAL info object? While being able to transfer the documentation of data elements might be very useful for your app, I can't see that generally it would be of interest to clients - I've certainly never heard of such a requirement. So, my opinion at least, it isn't a design flaw.
2) As you've pointed out, you can get the tables that do the mapping, so you know the source data elements, so you can get the documentation. I'm not sure of how to store the documentation, but the obvious candidate for a link between infoobject and dataelement would be master data of an own infoobject. You could wrap DOCU_GET in an RFC (if it isn't RFC enabled), and do a direct call between your 3rd party app and r/3 to get the documentation. For information about the mapping tables, I'd suggest asking that question specifically in one of the BI forums.
matt

Process Chain - How to make decision based on data in PSA and execute DTP

Need to create process in Process Chain, which will execute the DTP based on data in PSA.
Say we have two DSO A & B, both getting data from same datasource.
In process chain, we need to read data in one of the date field in PSA and make a decision, which DTP to get execute in process chain.
Say if date field contains year = 2000, than load to DSO A, if year is 2001, load data to DSO B.
Suggest the solution. ...

Hi,
Tyr this steps.
1) Develop ABAP process types
ABAP report to read PSA data using function module
Trigger events based on year
event1 -> for even year data
event2 -> for add year data
2) Develop local process chains for each DTPs and schdule it with events mentioned above.
Do reply with comments.

How to make a form dynamic so that it displays different logos at runtime

I am working on some assignment wherein I would like to make a form dynamic so that in it's designated image holder it displays different logos/pictures at run time? First of all is there such a possibility?? I am still very new to this forum and also trying to understand the logic/bindings/heirarchy etc. in LCD. Any input would be highly appreciated.
Thanks in advance

LC 7 or 8 does not help load logs at runtime. However you can associate all your logs at design time and control their visibility property based on the events. This may help fulfill the requirements you have to an extent however adding number of images at design time will increase the size of the template.

How to make a graph dynamic data driven? Plus some XML basics for Illustrator?

Similar Messages

Maybe you are looking for