How to make a MacBook Pro (mid 2009) work properly with a 3M Streaming projector?

Ok, so I have a MacBook Pro (mid 2009), a 3M Streaming projector and very annoying problem.
When I connect my MacBook Pro with a Mini Displayport to HDMI adapter to the 3M projector, I get a pink tint, like a filter over the image, it’s very frustrating.
This are the tests I’ve done:
1. I tried the adaptor and the projector on a different (more recent) Mac -> It worked fine.
2. I tried connecting my MacBook Pro to a different not HDMI but VGA projector -> It worked fine.
3. I used some Terminal code I found on the web to force the Mac to send RGB signal, don’t know if that has anything to do with it, but I tried anyway -> Didn’t work
So I’m confused, it’s not the physical port of my MacBook cause it worked fine with a VGA projector, It’s no the 3M projector and it’s not the Mini Displayport to HDMI adaptor cause it worked fine on a different Mac.
So what is it?
I’m totally desperate, I haven’t been able to solve this problem, so if you guys can help me you will be my heroes.
Thanks.
– 13" MacBook Pro (mid 2009) runing Mavericks.
– 3M Streaming projector Powered by Roku.

Yes as Clinton says this is correct.
I've used a Sata to USB connector which is only a few pounds instead of an enclosure for the clone, but then I wasn't keeping mt old HDD. But that's an option if you don't need it.
I also use Carbon copy cloner as this will clone your recovery partition as well. Apples disk utility will also clone drives but I'm not sure that it copy's the recovery partition.
I highly redomend my Samsung 840 pro 256Gb - it's about the fastest drive you'll get (nearly) but is backed by Samsung's unrivaled SSD reliability and 5 year warranty. I've also used an 840 basic model on an older macbook and was equally pleased.
Crucial's drives are reliable mac friendly drives but are somewhat slower on the write speeds vs the 840 Pro.
I'd avoid OCZ drives due to so many failures across their range although they do have great reviews and some models just edge the Pro on speed although it's fairly negligible.
As Clinton says, avoid the Samsung Evo drive. I wanted to buy this drive as it is a great drive - but there are many users that have had compatibility issues with it when installed in a Mac. This may rectified on a future firmware update possibly, but until it's proven I would avoid it for now.

Similar Messages

Some of my application in macbook pro doesn't work properly with Os Yosemite, such as dictionary and MplayerX and etc

I face to this problem since new OS, Yosemite has installed on my mac book
some of my application in macbook pro doesn't work properly with Os Yosemite, such as dictionary (mac dictionary) and MplayerX and etc
For example when I make MplayerX and such application fullscreen the screen become white and just voice of video can be heard or when I use Mac Dictionary (look-up dictionary) in any pages the meaning of work is not appear ( look at the picture above), so i need to directly open dictionary to find the meaning.
Please help me
tq

Same thing here with MPlayerX (annoying)

How do I install windows 7 on a macbook pro mid 2009 using bootcamp and no optical drive?

How do I install windows 7 on a macbook pro mid 2009 using bootcamp and no optical drive?
My optical drive is non-functional and I want to dual boot with win7. The only problem is my macbook does not boot from USB at all, even when I hold th ALT key down when it is starting up.
-I have a flashdrive with win7 on it.
-I mounted the ISO of win7 with toast for bootcamp to do its thing.

Good luck.
Consider this a bump so that hopefully someone with better news spots your thread.
Allan

How to install windows 7 on my macbook pro mid 2009 using usb. right now aim using mavericks 10.9 can any one please help me. I tried to edit plist in boot camp but it went wrong please help me

how to install windows 7 on my macbook pro mid 2009 using usb. right now iam using mavericks 10.9 can any one please help me. I tried to edit plist in boot camp but it went wrong please help me.
Iam new to coding. please help me.

try the solution posted by kunu here and report back
https://discussions.apple.com/thread/5105056?tstart=0

How do I get sound & video from my MacBook Pro (mid 2009)?

When I connect My MacBook Pro (mid 2009) to my HDMI TV I get a good picture but no sound. I use two cables, one fron the Mini DisplayPort and the other from the headphone jack. How do I get sound on my TV from my macbook pro?

Solution may be found if you search in the "More Like This" section over in the right column and by doing a forum search.

I updated to OS X Mavericks and now trying to run Logic Pro X on a MacBook Pro mid-2009, using an M-Audio Axiom 49 and an M-Audio Fast Track Pro... Logic keeps telling me that Mac OS X MIDI Services are not available... How do I solve this problem?

I updated to OS X Mavericks and now trying to run Logic Pro X on a MacBook Pro mid-2009, using an M-Audio Axiom 49 and an M-Audio Fast Track Pro... Logic keeps telling me that Mac OS X MIDI Services are not available... How do I solve this problem?

I just checked to see if the update to OS X Yosemite 10.10.1 solved any of the issues outlined in my previous post, and to my dismay, nothing has changed -- all of the previous problems persist.
My iMac (8) -- it's renamed itself eight times since the recent troubleshoot with the Apple tech rep -- shows up as a shared device in Finder on my MacBook Pro, but when I click on it, I cannot establish a connection using "Connect As". So I've attempted to connect using the menu "Go/Connect to Server...", using both (alternately) the iMac's name and IP address, to no avail. I get a message which reads: "There was a problem connecting to the server 'Peter's iMac (8)'. This server may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again."
Here's what I know:
The server -- Peter's iMac (8) does exist;
The server -- Peter's iMac (8) is available at this time;
The server name -- Peter's iMac (8) -- is correct, as specified in the system sharing preferences;
The server IP address is correct, as specified in the system sharing preferences;
The network connection is active when I attempt to connect.
I'm convinced the problems stem directly from the OS X Yosemite update. None of this was ever remotely an issue in the previous OS X's -- any of them. This is maddening! What can be done? Apple?? Anyone???

How do I reinstall lion using time machine (Macbook Pro mid-2009)?

I am going to replace my hard drive (and add RAM) on my Macbook Pro (mid-2009) myself. I have Lion (10.7.4) currently, and have backed up via time machine on an external drive. I don't have Lion on a usb, and from what I read, Lion Recovery via internet isn't applicable for my macbook (pre 2010). Is the time machine backup a bootable drive? If so, then am I all good so long as my backup is completed prior to replacing the hard drive? If not, how do I create a bootable drive so I can get back to "normal"?
Thanks! :-)

To determine if your Time Machine backup has a Recovery HD on it restart the computer. Immediately after the chime press and hold down the OPTION key until the boot manager appears. A Recovery HD option should appear on your Time Machine backup drive. Select it and click on the arrow button below the icon. If all is well your machine should boot into the Recovery HD utilities screen.
If all is well then after you replace your drive boot from the Time Machine Recovery HD. Start by:
Drive Preparation for Lion
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your new hard drive (this is an entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
After finishing formatting quit DU and return to the main menu. Select the option to Restore from a Time Machine backup then click on the Continue button.

How to improve macbook pro mid 2009

i got Macbook pro mid 2009 with processor speed 2.26GH and memory 2GB and storage of 159GB. running maverick 10.9.4
Its slow and battery do not last more than hour.
Any suggestions?
is it worth upgrading it or buy new one.

That model has a max possible RAM fo 8GB (two 4GB modules). As long as you are not doing anything heavy-duty, 4GB (two 2GB modules) is probably OK for Mavericks. I have on MBP running Mav on 4GB with no indications it is struggling for more RAM.
Only buy RAM from a trusted Mac RAM reseller. I use Other World Computing (their RAM listings for your model are here):
http://eshop.macsales.com/shop/memory/Apple_MacBook_MacBook_Pro/Upgrade/DDR3
Crucial.com is also good. Avoid Kingston ValuRAM. It has never been happy in Intel Macs. You will get the right RAM from either vendor. Can't say that for brick-n-mortar electronics stores. Too hard to find one with a resident geek who speaks Mac.
Installation is an easy do-it-yourself task; all you need is the right screwdriver. Handy video here:
http://eshop.macsales.com/installvideos/macbookpro_13_unibody/
As for the battery, there is a built-in utility that will show the current condition. Click and hold on your Apple menu. Hold down the OPTION key and the first item with change to System Information. Launch it. When it comes up. find "Power" in the left-hand contents pane and select it to get a battery report. Looks like this:
Copy the information I've outlined in red and paste it into a response to your thread here. Those numbers describe the current condition of the battery.

No audio after Mountain Lion 10.8.3 update Macbook Pro Mid 2009

A few days ago I downloaded some updates for Mountain Lion on my Macbook Pro Mid 2009. After that there is no sound and internal speakers are not listed as an output device. The startup sound is still working (I would guess it uses the same speakers?) but nothing else makes a sound through the speakers. Also headphones are working. I'm not 100% sure if my OS version vas 10.8.2 before the update or not.
I have tried to input the headphones in and out many times to make sure that no microswitches are stuck. Also I have reset SMC and NVRAM/PRAM and reinstalled Mountain Lion. I even installed Lion (10.7.0) to be sure but it still won't work.
Any help would be appreciated.

Make a "Genius" appointment at an Apple Store.
Back up all data on the internal drive(s) before you hand over your computer to anyone. If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
*An SSD doesn't need to be zeroed.

How can connect my macbook pro mid 2012 to my imac 21.5 inch mid 2010 ?? I want to use imac like a display for macbook.

How can connect my macbook pro mid 2012 to my imac 21.5 inch mid 2010 ?? I want to use imac like a display for macbook.

Target Display Mode: Frequently Asked Questions (FAQ)
with a mini display to mini display cable. Attach it to the Thunderbolt port on your MBP and to the mini display port on your iMac.
How do I enable TDM?
Make sure both computers are turned on and awake.
Connect a male-to-male Mini DisplayPort or ThunderBolt cable to each computer.
Press Command-F2 on the keyboard of the iMac being used as a display to enable TDM.
Note: In Keyboard System Preferences, if the checkbox is enabled for "Use all F1, F2, etc. keys as standard functions keys," the key combination changes to Command-Fn-F2.

Negotiated Link Speed on MacBook Pro mid-2009 with Kingston SSDNow v300

Hi,
I have a mid-2009 MacBook Pro (13") with Kingston SSDNow v300 SSD drive with Mavericks OS X installed.
I've noticed from different forums that many users have the same problem that I have: SSD drive's Negotiated Link Speed is only 1,5 Gbps, although MacBook Pro mid-2009 should support 3 Gbps speed.
My system has EFI 1.7 firmware update (MBP55.00AC.B03) installed in and System Info says that 3 Gbps Link Speed should be possible:
NVidia MCP79 AHCI:
Vendor:    NVidia
Product:    MCP79 AHCI
Link Speed:    3 Gigabit
Negotiated Link Speed:    1.5 Gigabit
Physical Interconnect:    SATA
Description:    AHCI Version 1.20 Supported
Many users have tried to reset NVRAM and SMC and I have also done these steps, but with not any improvement.
Some users have mentioned that MacBook Pro mid-2009 has a poor SATA ACHI chipset (NVidia MCP79) and SATA III SSD drives won't work on SATA II speed unless SSD drive is forced to work on SATA II speed by firmware update or by some tweaking tool. Is there this kind of tool available for Kingston SSDNow v300?
One user says that he got 3 Gbps Negotiated Link Speed on Mountain Lion, but after installing Mavericks, speed dropped to 1,5 Gbps (https://discussions.apple.com/message/23549859#23549859).
So, is there any way to get Negotiated Link Speed to work on 3 Gbps on Kingston SSDNow v300 with MacBook Pro mid-2009 (for example by installing an older version of Mac OS X) or do I have to buy a new SSD drive from another manufacturer to get 3 Gbps Negotiated Link Speed to work on my machine?
If the last option (to buy a new SSD drive) is the only option, would it be wise to look for an older model, a SATA II drive, (maybe OCZ Vertex 2) to get 3 Gbps speed?
Thanks!

Hi
I was just as frustated as you after installing the Kingston v300. I mean it's a solidly built drive with the reliability of kingston (I've been using their RAM for years and years in my desktop PC without problems). Unfortunately, for a the last 3 months I had it in my 2009 unibody white macbook, it was stuck at link speed 1.5.
I've been searching in forums since then without any solution. Even the update for bios is not available for my model.
I just tried the SMC reset after reading the blog.
http://thenextweb.com/lifehacks/2010/12/04/how-when-why-to-reset-the-pram-smc-on -your-mac/#!w3XEY
On reboot, everything seemed faster, so I checked the negotiated link speed and it was at 3 instead of 1.5! Yay! Then I checked the disk transfer speed on Blackmagic Disk speed test and it roughly doubled from 138 to 260MB/s. Now, I'm not going to shutdown or restart...
I hope this post is useful for people like me stuck at 1.5 Gbps speed. Good luck

Macbook pro mid 2009, yosemite 10.10.2 bootcamp installation windows 7 problem

i have a macbook pro mid 2009 and yosemite 10.10.2 installed. my bootcamp is 5.1.3 and i cant install windows 7. every time i create the usb installer and restart the mac to install windows the usb installer dont appear. what i do?
I try to make a uefi usb installer but The screen frozen when i click on efi boot

Your Mac has (or used to have) a built-in Optical drive. You need a physical DVD for Windows and a USB2 flash drive for BC drivers. Bootcamp Info.plist modifications cause more problems than they resolve.
Your Mac is also not UEFI compliant, late 2013+ Macs are the first ones to be, so EFI boot will not work.
From the un-modified Bootcamp Info.plist file...
        <array>
                <string>MacBook7</string>
                <string>MacBookAir5</string>
                <string>MacBookPro10</string>
                <string>MacPro5</string>
                <string>Macmini6</string>
                <string>iMac13</string>
        </array>
        <key>PreUSBBootSupportedModels</key>
        <array>
                <string>MacBook7,1</string>
                <string>MacBookAir3,2</string>
                <string>MacBookPro8,3</string>
                <string>MacPro5,1</string>
                <string>Macmini4,1</string>
                <string>iMac12,2</string>
        </array>

Macbook Pro Mid 2009 Processor 2.26 GHz Intel Core 2 Duo, Memory 2 GB 1067 MHz DDR3. iOS 10.10.1 (14B25). My mac is running slow and have ran EtreCheck. Please help me fix my mac. Thanks!

Macbook Pro Mid 2009 Processor 2.26 GHz Intel Core 2 Duo, Memory 2 GB 1067 MHz DDR3. iOS 10.10.1 (14B25). My mac is running slow and have ran EtreCheck. Please help me fix my mac. Thanks!
Problem description:
My mac has been very slow lately. Any suggestions?
EtreCheck version: 2.1.2 (105)
Report generated December 14, 2014 at 8:15:29 PM PST
Hardware Information: ℹ️
MacBook Pro (13-inch, Mid 2009) (Verified)
MacBook Pro - model: MacBookPro5,5
1 2.26 GHz Intel Core 2 Duo CPU: 2-core
2 GB RAM Upgradeable
BANK 0/DIMM0
1 GB DDR3 1067 MHz ok
BANK 1/DIMM0
1 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
NVIDIA GeForce 9400M - VRAM: 256 MB
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 0:54:52
Disk Information: ℹ️
Hitachi HTS545016B9SA02 disk0 : (160.04 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
MacHD (disk0s2) / : 159.05 GB (49.15 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
HL-DT-ST DVDRW GS23N
USB Information: ℹ️
Apple Inc. Built-in iSight
Apple Internal Memory Card Reader
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Gatekeeper: ℹ️
Mac App Store and identified developers
Startup Items: ℹ️
DVD3EnablerService: Path: /Library/StartupItems/DVD3EnablerService
Startup items are obsolete in OS X Yosemite
Problem System Launch Agents: ℹ️
[failed] com.apple.AirPlayUIAgent.plist [Details]
[failed] com.apple.CallHistoryPluginHelper.plist
[failed] com.apple.coreservices.appleid.authentication.plist [Details]
[failed] com.apple.icloud.fmfd.plist [Details]
[failed] com.apple.secd.plist [Details]
[failed] com.apple.security.cloudkeychainproxy.plist [Details]
[failed] com.apple.telephonyutilities.callservicesd.plist [Details]
Problem System Launch Daemons: ℹ️
[failed] com.apple.ctkd.plist [Details]
[failed] com.apple.icloud.findmydeviced.plist [Details]
[failed] com.apple.ifdreader.plist
[failed] com.apple.nehelper.plist [Details]
[failed] com.apple.softwareupdate_download_service.plist [Details]
[failed] com.apple.wdhelper.plist [Details]
[failed] com.apple.xpc.smd.plist [Details]
Launch Agents: ℹ️
[loaded] com.google.keystone.agent.plist [Support]
[invalid?] com.oracle.java.Java-Updater.plist [Support]
[not loaded] com.teamviewer.teamviewer.plist [Support]
[not loaded] com.teamviewer.teamviewer_desktop.plist [Support]
Launch Daemons: ℹ️
[running] com.adobe.ARM.[...].plist [Support]
[loaded] com.adobe.fpsaud.plist [Support]
[loaded] com.google.keystone.daemon.plist [Support]
[invalid?] com.oracle.java.Helper-Tool.plist [Support]
[not loaded] com.teamviewer.teamviewer_service.plist [Support]
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist [Support]
[invalid?] com.nds.pcshow.plist [Support]
[invalid?] com.nds.pcshow.uninstall.plist [Support]
User Login Items: ℹ️
None
Internet Plug-ins: ℹ️
WidevineMediaOptimizer: Version: 6.0.0.12757 - SDK 10.7 [Support]
FlashPlayer-10.6: Version: 16.0.0.235 - SDK 10.6 [Support]
QuickTime Plugin: Version: 7.7.3
AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Support]
AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Support]
Flash Player: Version: 16.0.0.235 - SDK 10.6 [Support]
Default Browser: Version: 600 - SDK 10.10
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Support]
iPhotoPhotocast: Version: 7.0
3rd Party Preference Panes: ℹ️
Flash Player [Support]
Time Machine: ℹ️
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Volumes being backed up:
MacHD: Disk size: 159.05 GB Disk used: 109.90 GB
Destinations:
KINGSTON [Local]
Total size: 30.88 GB
Total number of backups: 0
Oldest backup: -
Last backup: -
Size of backup disk: Too small
Backup size 30.88 GB < (Disk used 109.90 GB X 3)
Top Processes by CPU: ℹ️
      6% WindowServer
      0% AppleSpell
      0% SystemUIServer
      0% powerd
      0% Google Chrome
Top Processes by Memory: ℹ️
131 MB softwareupdated
112 MB Google Chrome
41 MB Finder
34 MB Google Chrome Helper
32 MB WindowServer
Virtual Memory Information: ℹ️
51 MB Free RAM
587 MB Active RAM
551 MB Inactive RAM
350 MB Wired RAM
10.96 GB Page-ins
865 MB Page-outs
Diagnostics Information: ℹ️
Dec 14, 2014, 07:37:58 PM Install Adobe Flash Player_2014-12-14-193758_[redacted].crash
Dec 14, 2014, 07:21:27 PM Self test - passed

Please describe the problem in as much relevant detail as possible. The "etrecheck" fad hasn't made that step any less necessary. The usual results of posting etrecheck output on this site without a full description of the problem are very poor.
The many "failed" warnings that etrecheck sometimes spews mean nothing. Those warnings are not a reason to reinstall the OS, or to do anything else at all. They should be ignored.
The better your description of the problem, the better the chance of a solution.
For example, if the computer is slow, which specific actions are slow? Is it slow all the time, or only sometimes? What changes did you make, if any, just before it became slow? Have you seen any alerts or error messages? Have you done anything to try to fix it? Most importantly, do you have a current backup of all data? If the answer to the last question is "no," back up now. Ask if you need guidance. Do nothing else until you have a backup.

On a MacBook Pro Mid-2009, i got a black screen.

Hi Everyone,
I have a MacBook Pro Mid-2009 17inch.
I use to run Windows XP for gaming. Recently, my logic board has been replaced. Now, i am unable to boot into my Windows partition : i am getting a black screen.
I deleted it with BootCamp assistant and created a new one.
Now, when i insert the windows install dvd, after reboot still stuck on black screen. I tried with XP install dvd and a brand new windows 7 install DVD.
Any suggestion accepted.
Kind regards,

Try smc and pram resets:
SMC
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Option, Command (⌘), P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on your Mac.
Immediately press and hold the Option-Command-P-R keys. You must press this key combination before the gray screen appears. Continue holding the keys down until your Mac restarts, and you hear the startup sound for the second time.
Release the keys.
http://nwsinglespeed.hubpages.com/hub/Do-You-Know-About-Apples-Flat-Rate-Repair- Pricing
Make a Genius Bar appointment, they have extensive testing equipment and have evaluated for FREE.
They will give you your options.
If it is your Logic Board ask about the following:
http://www.apple.com/retail/geniusbar

Can I use Apple TV with my MacBook Pro mid-2009

Does Apple TV work with MacBook Pro, mid 2009?

Lizardhead wrote:
Good answer Chris CA: but I think the follow up would be ---HOW-- Chris is just going for points
No he's not. Points can ONLY be awarded by the original topic starter. Points are not awarded by simply posting.
My answer was based on it's not really that much harder to use than plugging it in.
but I think the follow up would be ---HOW
Follow the very. very simple instructions that came with the AppleTV.
Plug AppleTV in
Connect it to your TV.
Turn on AppleTV.
Launch iTunes on your computer and enable Home Sharing.
Settings > Computers and turn on Home Sharing. Use the same AppleID as you use in iTunes on your computer.

How to make a MacBook Pro (mid 2009) work properly with a 3M Streaming projector?

Similar Messages

Maybe you are looking for