How to make a node storage disabled for a particular cache?

I have multiple caches that are distributed across the nodes in my application. Can I disable storage (localstorage=false) for a certain cache in a node.
Intention is to make something like this:
CacheA distributed between node1 and node2
CacheB distributed between node1 and node3
Thus none of the node would be a non storage node completely here. Hence I would be required to specify this in the coherence-config.xml. If the answer is following for node 2
<distributed-scheme>
     <scheme-name>CacheB</_CacheEvent_scheme-name>
     <service-name>DistributedCache</service-name>
     *<local-storage>false</local-storage>*
     <backing-map-scheme>
     <local-scheme>
     <scheme-ref>backingSchemeB</scheme-ref>
     </local-scheme>
     </backing-map-scheme>
     <autostart>true</autostart>
     </distributed-scheme>
     <local-scheme>
     <scheme-name>backingSchemeB</scheme-name>
     </local-scheme>
What should be the backing scheme, as my local storage is false for cacheB?

Hi Mahesh,
you can control the storage-enablement of distributed caches on a per-service basis.
In your case, you have to put cache A and cache B into different services (serviceA and serviceB for the example) and run service A as storage-enabled on nodes 1 and 2, and service B as storage-enabled on nodes 1 and 3.
For more information, look at my post from two years ago:
Re: Partitioned cache - where to put what config files?
Best regards,
Robert

Similar Messages

  • How to make F7,F8,F10 disabled for security?

    Hi alll,
    Pls can any boady tell me ; how to make F7,F8,F10 disabled for security purposes?
    Abdetu.

    Hello Gerd
    Thanks for reply,
    i made a search for the file u mentioned
    FMRWEB; i found it on path C:\orant\FORMS60
    having the following :
    # FMRWEB.RES is the key definition file for webforms. The syntax is:
    # JFN : JMN : URKS : FFN : URFD (whitespace ignored)
    # JFN = Java function number
    # JMN = Java modifiers number
    # URKS = User-readable key sequence (double-quoted)
    # FFN = Forms function number
    # URFD = User-readable function description (double-quoted)
    # JAVA FUNCTION NUMBER
    # 33 = PageUp
    # 34 = PageDown
    # 35 = End
    # 36 = Home
    # 37 = LeftArrow
    # 38 = UpArrow
    # 39 = RightArrow
    # 40 = DownArrow
    # 65 - 90 = Ctrl+A thru Ctrl+Z (These will always have the control
    # modifier explicitly included, as well as any other
    # modifiers that might be used.)
    # 112 - 123 = F1 thru F12
    # 9 = Tab (Ctrl+I, without the control modifier)
    # 10 = Return (Ctrl+J, without the control modifier)
    # JAVA MODIFIERS NUMBER
    # Equal to the sum of the values for the modifier keys:
    # 0 = None
    # 1 = Shift
    # 2 = Control
    # 4 = Meta
    # 8 = Alt
    # FORMS FUNCTION NUMBER
    # The Forms function numbers match the function numbers found in a
    # typical Forms key binding file.
    # USER-READABLE STRINGS
    # The double-quoted strings appear when users click [Show Keys], and
    # are used for this purpose only. These strings can be translated as
    # needed. Note that the strings do not affect what actually happens
    # when end users press a particular key sequence.
    9 : 0 : "Tab" : 1 : "Next Field"
    9 : 1 : "Shift+Tab" : 2 : "Previous Field"
    116 : 0 : "F5" : 3 : "Clear Field"
    38 : 0 : "Up" : 6 : "Up"
    40 : 0 : "Down" : 7 : "Down"
    33 : 0 : "PageUp" : 12 : "Scroll Up"
    34 : 0 : "PageDown" : 13 : "Scroll Down"
    69 : 2 : "Ctrl+E" : 22 : "Edit"
    10 : 0 : "Return" : 27 : "Return"
    76 : 2 : "Ctrl+L" : 29 : "List of Values"
    115 : 0 : "F4" : 32 : "Exit"
    75 : 2 : "Ctrl+K" : 35 : "Show Keys"
    83 : 2 : "Ctrl+S" : 36 : "Commit"
    118 : 1 : "Shift+F7" : 61 : "Next Primary Key"
    117 : 0 : "F6" : 62 : "Clear Record"
    38 : 2 : "Ctrl+Up" : 63 : "Delete Record"
    117 : 1 : "Shift+F6" : 64 : "Duplicate Record"
    40 : 2 : "Ctrl+Down" : 65 : "Insert Record"
    119 : 1 : "Shift+F8" : 66 : "Next Set of Records"
    1005 : 0 : "Down" : 67 : "Next Record"
    1004 : 0 : "Up" : 68 : "Previous Record"
    118 : 0 : "F7" : 69 : "Clear Block"
    66 : 2 : "Ctrl+B" : 70 : "Block Menu"
    34 : 1 : "Shift+PageDown" : 71 : "Next Block"
    33 : 1 : "Shift+PageUp" : 72 : "Previous Block"
    116 : 1 : "Shift+F5" : 73 : "Duplicate Field"
    119 : 0 : "F8" : 74 : "Clear Form"
    122 : 0 : "F11" : 76 : "Enter Query"
    122 : 2 : "Ctrl+F11" : 77 : "Execute Query"
    69 : 3 : "Shift+Ctrl+E" : 78 : "Display Error"
    80 : 2 : "Ctrl+P" : 79 : "Print"
    123 : 0 : "F12" : 80 : "Count Query"
    85 : 2 : "Ctrl+U" : 81 : "Update Record"
    121 : 3 : "Shift+Ctrl+F10" : 82 : "Function 0"
    112 : 3 : "Shift+Ctrl+F1" : 83 : "Function 1"
    113 : 3 : "Shift+Ctrl+F2" : 84 : "Function 2"
    114 : 3 : "Shift+Ctrl+F3" : 85 : "Function 3"
    115 : 3 : "Shift+Ctrl+F4" : 86 : "Function 4"
    116 : 3 : "Shift+Ctrl+F5" : 87 : "Function 5"
    117 : 3 : "Shift+Ctrl+F6" : 88 : "Function 6"
    118 : 3 : "Shift+Ctrl+F7" : 89 : "Function 7"
    119 : 3 : "Shift+Ctrl+F8" : 90 : "Function 8"
    120 : 3 : "Shift+Ctrl+F9" : 91 : "Function 9"
    113 : 0 : "F2" : 95 : "List Tab Pages"
    72 : 2 : "Ctrl+H" : 30 : "Help"
    ------------------------------------end of file-----------------------------------------
    Now if this is the file i have How can i make F7,F8,F10 disabled for security?
    can u clarify to me how can handle this,i am afraid i may do something wrong..!!!
    But how do you want to commit without the shortcut?? What do u mean by a shortcut..?
    Thanks in advance..
    Regards,
    Abdetu.

  • How to make Scroll viewer zoom disable

    how to make Scroll viewer zoom disable in windows store app

    Hi Imtiyazk,
    Thanks for sharing the solution, should help others have the same issue.
    --James
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • How to make all nodes in a detailed navigation tree open automatically??

    Dear All,
    I have added some iViews to two folders and add these two folders to a workset "Time" and then add "Time" to the role of Employee portal user.
    How to make all nodes expanded automatically when this workset is clicked in EP??
    thanks,
    Zita

    Not surprising...it does not work even if you follow the exact way...
    Role ->
             Workset 1
                          -> Page 1
                          -> Workset 2
                                           -> Page 2
                          -> Workset 3
                                           -> Page 3
    When the user clicks on Role which is the Entry Point, I want the user to see Page1 (works alright) and want the tree node Workset 2 open (doesn't work)...I want tree node Workset 3 closed (which is what happens...)
    The thing is Workset 2 has to be open...
    This is what I've done...I've made the Initial State of Navigation Panel set to "Open"...
    What else is to be done????
    Thanks a lot.
    JP

  • How to make Add to Favorites Option for website?

    Please Advice how to make Add to Favorites Option for the
    Website.
    Appreciated
    Thank You

    http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=12&catid=189&threadid =1191543&highlight_key=y&keyword1=favorites

  • How to make a node chooseable

    this is my tree:
    <af:tree value="#{favoriteTreeMB.treeModel}" var="node"
    rowSelection="single" id="pt_t1">
    <f:facet name="nodeStamp">
    <af:group>
    <af:goLink text="#{node.attributes['name']}" styleClass="common"
    destination="#{node.attributes['link']}"
    rendered="#{not empty node.attributes['taskflow']}"/>
    <af:outputText value="#{node.attributes['name']}"
    rendered="#{empty node.attributes['taskflow']}"/>
    </af:group>
    </f:facet>
    <f:facet name="pathStamp"></f:facet>
    </af:tree>
    this is the tree model:
    public class FavoriteTreeModel extends ChildPropertyTreeModel {
    public FavoriteTreeModel() {
    super();
    public FavoriteTreeModel(java.lang.Object p1, java.lang.String p2) {
    super(p1, p2);
    @Override
    public boolean isContainer() {
    return ((TreeNode)getRowData()).isLeaf();
    how to make the node chooseable,and how to get the choosed node?

    Hi,
    the tree component has a selectionListener property that you need to wire with a method on your tree model using EL
    Frank

  • HT4847 How to make enough iCloud storage

    How to make enough iCloud storage? What would I need to delete?

    Just open to "Settings > iCloud > Storage & Backup > Manage Storage" and choose and delete what you do not need anymore (e.g. old backups or app data of which do not need and use anymore). 

  • How to make a Colorful Gif Image for Holi

    How to make a colorful Gif Image for Happy Holi 2014

    Okay, I know this doesn't answer your question, but don't get me wrong. A logo is meant to be the way it was designed - upright, no flipping/ swiveling animation. Why exactly do you want to let your logo turn around?
    If its to grab attention, why dont you consider animating the area on which your logo sits (header)? Or maybe add nice transitive slideshows on your main content area to add more interactivity?

  • How to make Safari remember my password for sites whiteout promoting me? I mean i don't want to ask me if i want to save the password or not, just save it automatically to my keychain.

    How to make Safari remember my password for sites whiteout promoting me? I mean i don't want to safari ask me if i want to save the password or not, can it just save it automatically to my keychain qhitout asking?

    No. It's a safety feature. Select the appropriate response and the next time you visit, you won't be prompted.

  • How to set a default Billing type for a particular Delivery type

    Dear All,
    How to set a default billing type for a particular delivery type.
    My requirement is, we are creating delivery for a Stock Transport Order. Delivery type is NL and the Purchase order type is UB.
    When we are creating Billing, it should take Billing type "ZSTO" by default, which is the customised Billing type.
    Where we have to do this setting?
    In case of normal sales order, this control will be available in the Sales order document types.
    In case STO, how to set a default billing type for a delivery type (NL).
    Regards,
    Rajesh

    There is a customization available here no default or hard coded
    Normally in a sales doc type we mention which billing type system has to pick
    If the billing happens from a PO which billing type system will take depends on the controls set in the areas mentioned below
    Go to your delivery type OVLK (say your delivery type is NL)
    In that there is a field called default order qty in the order reference tab (say if you maintained DL there)
    This DL is called PSEUDO order type
    Then in VOV8 for DL based on the billing types mentioned ,system will take the billing doc
    For delivery related billing say if you mention say ZF8 in the details of DL in VOV8(provided you have created ZF8)
    Then while you bill the delivery doc of NL system will take ZF8
    For intercompany delivery you can create ZIV billing type also Pure customization
    PO is linked to delivery type ( MM spro settings)--Del type linked to order (pseudo) type---in order type (pseudo) we mention the billing types. Here the flow is bit different that pure SD flow
    Though the invoice is crated by manually putting customized Biiling Type and A/Cing doc also generated, but in the VF04 still system shows the same deliveries pending with Billing Type (F2).
    This manual is not reqd if the said assignments are done properly
    Hope it can assist you.
    Thanks & Regards
    JP
    Edited by: J Prakash on Jun 23, 2010 4:05 PM

  • How can i find the exact BADI For a Particular Transaction

    hi ppl,
    How can i find the exact BADI For a Particular Transaction. Is there any Standard transaction or Programs to do this or suggest some other way.

    Use this code:
    *& Report  ZGET_BADI
    REPORT  ZGET_BADI.
    TABLES : TSTC,
    TADIR,
    MODSAPT,
    MODACT,
    TRDIR,
    TFDIR,
    ENLFDIR,
    SXS_ATTRT ,
    TSTCT.
    DATA : JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
    DATA : FIELD1(30).
    DATA : V_DEVCLASS LIKE TADIR-DEVCLASS.
    PARAMETERS : P_TCODE LIKE TSTC-TCODE,
    P_PGMNA LIKE TSTC-PGMNA .
    DATA wa_tadir type tadir.
    START-OF-SELECTION.
    IF NOT P_TCODE IS INITIAL.
    SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
    ELSEIF NOT P_PGMNA IS INITIAL.
    TSTC-PGMNA = P_PGMNA.
    ENDIF.
    IF SY-SUBRC EQ 0.
    SELECT SINGLE * FROM TADIR
    WHERE PGMID = 'R3TR'
    AND OBJECT = 'PROG'
    AND OBJ_NAME = TSTC-PGMNA.
    MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
    IF SY-SUBRC NE 0.
    SELECT SINGLE * FROM TRDIR
    WHERE NAME = TSTC-PGMNA.
    IF TRDIR-SUBC EQ 'F'.
    SELECT SINGLE * FROM TFDIR
    WHERE PNAME = TSTC-PGMNA.
    SELECT SINGLE * FROM ENLFDIR
    WHERE FUNCNAME = TFDIR-FUNCNAME.
    SELECT SINGLE * FROM TADIR
    WHERE PGMID = 'R3TR'
    AND OBJECT = 'FUGR'
    AND OBJ_NAME EQ ENLFDIR-AREA.
    MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
    ENDIF.
    ENDIF.
    SELECT * FROM TADIR INTO TABLE JTAB
    WHERE PGMID = 'R3TR'
    AND OBJECT in ('SMOD', 'SXSD')
    AND DEVCLASS = V_DEVCLASS.
    SELECT SINGLE * FROM TSTCT
    WHERE SPRSL EQ SY-LANGU
    AND TCODE EQ P_TCODE.
    FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
    WRITE:/(19) 'Transaction Code - ',
    20(20) P_TCODE,
    45(50) TSTCT-TTEXT.
    SKIP.
    IF NOT JTAB[] IS INITIAL.
    WRITE:/(105) SY-ULINE.
    FORMAT COLOR COL_HEADING INTENSIFIED ON.
    *Sorting the internal Table
    sort jtab by OBJECT.
    data : wf_txt(60) type c,
    wf_smod type i ,
    wf_badi type i ,
    wf_object2(30) type C.
    clear : wf_smod, wf_badi , wf_object2.
    *Get the total SMOD.
    LOOP AT JTAB into wa_tadir.
    at first.
    FORMAT COLOR COL_HEADING INTENSIFIED ON.
    WRITE:/1 SY-VLINE,
    2 'Enhancement/ Business Add-in',
    41 SY-VLINE ,
    42 'Description',
    105 SY-VLINE.
    WRITE:/(105) SY-ULINE.
    endat.
    clear wf_txt.
    at new object.
    if wa_tadir-object = 'SMOD'.
    wf_object2 = 'Enhancement' .
    elseif wa_tadir-object = 'SXSD'.
    wf_object2 = ' Business Add-in'.
    endif.
    FORMAT COLOR COL_GROUP INTENSIFIED ON.
    WRITE:/1 SY-VLINE,
    2 wf_object2,
    105 SY-VLINE.
    endat.
    case wa_tadir-object.
    when 'SMOD'.
    wf_smod = wf_smod + 1.
    SELECT SINGLE MODTEXT into wf_txt
    FROM MODSAPT
    WHERE SPRSL = SY-LANGU
    AND NAME = wa_tadir-OBJ_NAME.
    FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
    when 'SXSD'.
    *For BADis
    wf_badi = wf_badi + 1 .
    select single TEXT into wf_txt
    from SXS_ATTRT
    where sprsl = sy-langu
    and EXIT_NAME = wa_tadir-OBJ_NAME.
    FORMAT COLOR COL_NORMAL INTENSIFIED ON.
    endcase.
    WRITE:/1 SY-VLINE,
    2 wa_tadir-OBJ_NAME hotspot on,
    41 SY-VLINE ,
    42 wf_txt,
    105 SY-VLINE.
    AT END OF object.
    write : /(105) sy-ULINE.
    ENDAT.
    ENDLOOP.
    WRITE:/(105) SY-ULINE.
    SKIP.
    FORMAT COLOR COL_TOTAL INTENSIFIED ON.
    WRITE:/ 'No.of Exits:' , wf_smod.
    WRITE:/ 'No.of BADis:' , wf_badi.
    ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(105) 'No userexits or BADis exist'.
    ENDIF.
    ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(105) 'Transaction does not exist'.
    ENDIF.
    AT LINE-SELECTION.
    data : wf_object type tadir-object.
    clear wf_object.
    GET CURSOR FIELD FIELD1.
    CHECK FIELD1(8) EQ 'WA_TADIR'.
    read table jtab with key obj_name = sy-lisel+1(20).
    move jtab-object to wf_object.
    case wf_object.
    when 'SMOD'.
    SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
    CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
    when 'SXSD'.
    SET PARAMETER ID 'EXN' FIELD SY-LISEL+1(20).
    CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
    endcase.
    Regards
    Vinayak

  • How to make 2 Node File Cluster with SAS Disks

    Hello,
    I cant fine any detailed, specific information and answer on this question
    I have 2 Servers, Say HP, with 4 SAS disks each,  1 for OS (2012R2Data) and 3 available.
    I want to create fault tolerant SMB 3.0 share for my Hyper-v nodes, to make hyper-v FT cluster afterwards.
    So, I see inr equirements that SAS disks will work, but during creating cluster, I can not manage Cluster to see disks from both servers (total 6 free units)
    If it is made via ISCSi target, both servers have access to that targets and cluster sees all available through iSCSI disks, but how to mnake SAS disk available to other server?
    Is it possible what I need with this configuration?  is it a option to make each server iSCSI target and initiator? (but it would be way complicated and slow, I think).
    so, what I have misunderstood, how to make FT file Cluster with 2 servers with SAS drives?
    Any info about this SPECIFIC config would be welcomed, or any general step-by-step guides  (please, do not link me guides with other config, like iscsi or with additional servers, I have seen a lot of them :()
    thanks

    Hello,
    I cant fine any detailed, specific information and answer on this question
    I have 2 Servers, Say HP, with 4 SAS disks each,  1 for OS (2012R2Data) and 3 available.
    I want to create fault tolerant SMB 3.0 share for my Hyper-v nodes, to make hyper-v FT cluster afterwards.
    So, I see inr equirements that SAS disks will work, but during creating cluster, I can not manage Cluster to see disks from both servers (total 6 free units)
    If it is made via ISCSi target, both servers have access to that targets and cluster sees all available through iSCSI disks, but how to mnake SAS disk available to other server?
    Is it possible what I need with this configuration?  is it a option to make each server iSCSI target and initiator? (but it would be way complicated and slow, I think).
    so, what I have misunderstood, how to make FT file Cluster with 2 servers with SAS drives?
    Any info about this SPECIFIC config would be welcomed, or any general step-by-step guides  (please, do not link me guides with other config, like iscsi or with additional servers, I have seen a lot of them :()
    thanks
    You cannot do what you want with a Microsoft built-in tools. MSFT require you to take your SAS disks away from your servers, buy a SAS JBOD (better more then one to get advantage of a so-called "enclosure awareness" and avoid single point of failure) and
    configure Clustered Storage Spaces with now *external* SAS drives. See:
    How to Configure a Clustered Storage Space in Windows Server 2012
    http://blogs.msdn.com/b/clustering/archive/2012/06/02/10314262.aspx
    Prerequisites
             A minimum of three physical drives, with at least 4 gigabytes (GB) capacity each, are required to create a storage
    pool in a Failover Cluster.
             The clustered storage pool MUST be comprised
    of Serial Attached SCSI (SAS) connected physical disks. Layering any form of storage subsystem, whether an internal RAID card or an external RAID box, regardless of being directly connected or connected via a storage fabric, is not supported.
    Windows Server 2012 R2 had flexed out some limitations so now ReFS is supported (but useless as VMs cannot be integrity checked and protected) and now you can use parirty spaces (also useless as they are DOG slow with a typical VM workload dominated by small
    writes, say 4KB write initiates 256KB+ parity stripe read-modify-write update). Core requirements "SAS everywhere" is still there.
    So if you don't want to mess with SAS JBODs you may give a try to a virtual SAN solutions available on the market. They can cluster a pair of hosts (even with a single port SATA drives) w/o any external hardware, only Ethernet required. There are even free
    options available. See:
    Free Virtual SAN
    http://www.starwindsoftware.com/native-san-for-hyper-v-free-edition
    Also Google (or Bing?) for DataCore and SteelEye as they have very similar native (Windows-based) offerings. + there's bunch of a VM-running storage doing more or less the same.
    Hope this helped a bit :)
    StarWind VSAN [Virtual SAN] clusters Hyper-V without SAS, Fibre Channel, SMB 3.0 or iSCSI, uses Ethernet to mirror internally mounted SATA disks between hosts.

  • How to make my iphone stop asking for my friend's Apple ID?

    First question: why does apple website logs me out every minute saying "session time out" or something(i'm using chrome on iPad)..!
    Second Question: why after i typed such a big question and when i switch tab and come back to this tab, the tex disappears (both chrome and safari for iPad)?
    Before going to my actual question:
    I(from USA) have an iPhone 5 and iPad 4, and bought the same for my dad(India), He has his own apple account and mine is separate.
    I've recently send the iPhone 5 (factory unlocking it for 10$ before sending it to him- I have proof of purchase for all 4 devices)  after the 5s is released.
    Third question: Why can't I add my dad's(Indian) phone number for iMessage?
    Since I used that phone with my USA SIM card for 1 day before sending it to him, it remembered my phone number, but even after trying everything except complete reset on my dad's iPhone( since he can't manage to download all apps from scratch again) and didn't get a new sim yet, we tried everything but I couldn't make the Apple ID remember my dad's phone number..!
    Fourth question: As my laptop broke, I used my friend's Mac to check the unlock is successful or not! Now when my dad tries to install an app from AppStore from his iPhone, it asks for password of my friend's Apple ID ,
    My question is how to add his phone number and how to make it forget my friend's Apple ID
    In Apple.com> manage Id> it doesn't show my friend's id anywhere. Do I need to de-authorize from his Mac?

    Hi, I've tried a reset all, and restored from another backup(iCloud) and it stopped asking my friend's Apple ID(its been two days i've restored, and my didn't complain yet).
    next, i've already tried all the steps you said.
    my dad uses his gmail account for apple devices(same id for his iPad too), and i already checked "My Phone" number is set to my dad's phone number.
    i asked my dad to turn off iMessage and Facetime, removed the sim, reset network settings and when he inserted the sim back, it shows his number, when he turns on the iMessage and  logs in using his email, it shows my phone number..!
    i went to view account, and it redirected to appleid.apple.com and i can see his phone number in the account.
    checked the location, set to India, time zone and everything looks fine.
    But the Apple ID is remembering my number instead of registering his number..!
    BTW, can you elaborate your reply for my 3rd Question.
    I've created a contact record with his name, phone number(with country code) and email addresses.
    Now what is the next step..?
    "setup phone to register with iMessage" can you explain this.
    I'm planning to remove sim in my phone, restore it to new device, setup the required softwares etc, take an iCloud back-up and ask him to restore from that backup. Since, the Apple ID doesn't know any phone number, when he inserts sim and turns on iMessage it should register the new number..!

  • How to make iBooks available in iBookstore for Sri Lanka and India?

    Does anyone know how to make iBooks available for purchase in iBookstore for Sri Lanka and India?  I have tried going through iTunes Connect to add regions, but it doesn't give me the option to add any more.  Thanks

    ali.basheer.ahamed wrote:
    Can I know How to add to the Indian store please. I have been trying the same - unable to add.
    Consult this list to see whether paid books are available in those countries:
    http://support.apple.com/kb/TS3599
    If not, you have to use another store, like Kindle, Nook, Kobo, Googlebooks, or Sony.

  • JTree: How to make few nodes editable

    I have a JTree which displays some complex expression.
    I want to make few nodes of the JTree editable and specify JCombobox as an editor. How can I do this?
    Any help or pointer?
    Thanks in advance
    Sachin

    I want to make few nodes of the JTree editablei'm not sure how you can do this - there is JTree.setPathEditable(boolean) but this means you'd have to subclass JTree ?
    you might be able to make a cell editor that returns some value to indicate a particular cell isn't editable, or failing that return a read-only component but I've not tried this..
    and specify JCombobox as an editor.this may help:
    http://www.cs.cf.ac.uk/Dave/HCI/HCI_Handout_CALLER/node156.html
    asjf

Maybe you are looking for

  • DVD drive does not recognize my Windows 7 disc

    I'm using a macbook pro purchased September 2009. I purchased Windows 7 home premium full version and when I insert the installation disc, both 32 and 64 bit versions, the DVD drive on the computer does not recognize the disc. It spits it back out. A

  • Po change after release and printout

    Dear Experts, My client require if we change the PO in any field ( expect qty and amount ) our po should be go in the po release again we using release indicator 4 and 6 but we want release should be go if we change any field like date tax code text

  • JPasswordField in Solaris problem

    Hey all, I have a program that will be running on windows and solaris. This program contains a JPasswordField. On windows, the field is fine, and by that i mean, that there is no way i can copy the contents to another text field and view the contents

  • Quantity Column in a Report painter

    good day Sap masters, i need to know how can i get to capture actual quantity data in a report prepared by way of report painter. i have been able to bring the qty column to which i have assigned a predfined Actual Qty characteristic inspite of this

  • Scaling dimensions of controls according to monitor resolution in Labview ver 8.6 (Windows)

    Hello.  I got a VI containing a lot of controls and indicators; the Vi was made on a 1920x1080 resolution and it occupies the full screen. I need a way to automatically scale all controls as window scales in different (minor) monitor resolution.  Vi