How to make a text formatting tools in oracle developer suite 10G R2

Dear Oracle Expert,
This is my configurations:
===============
1) OS-> windows 7 (Ultimate-32bit)
2) Oracle Developer Suite 10G R2
3) Oracle Database 10G
I create this form but i want it in that way. So, i can format the text written in text box, such as BOLD, Italic, make a url link etc.
How can i do that using Oracle Developer suite 10G R2.
Best regards,
Shimul

Mr.François Degrelle ,
Is this the proper command for sign-in the jar file
set PATH=C:\DevSuiteHome_1\jdk\bin;%PATH%
C:\DevSuiteHome_1\forms\webutil\sign_webutil C:\DevSuiteHome_1\forms\java\frite.jar
I am bit of confusing for this command C:\DevSuiteHome_1\forms\webutil\sign_webutil cuz here sign_webutil is used for webutil configuration. Just let me assure, that this is the right command or not. And if your answer is no, then what it will be.
Thanks in Advance

Similar Messages

How to connect Oracle Form Builder - Oracle Developer Suite 10g - Windows 7

Hi brothers and sisters,
Hope all you are fine. I have installed Oracle Developer Suite 10g on Windows 7 successfully and it is working properly. But when I connect to Oracle Form Builder using Connect window asking:
a. User Name
b. Password
c. Database
a message box appear: 'ORA-12154: TNS:could not resolve the connect identifier specified'
I verify my Connect String with: 'SELECT * FROM v$database', but the problem remain the same.
Please help me how can I connect to Oracle Form Builder.
Noor

hi
plz use Net Configuration Assistant or set tnsnames.ora with connect string and computer name.
Net Configuration Assistant.
when its opened then go to .
*Local Net Service Name Configuration.
*Click Next.
*Add.
*Click Next.
* Service Name--Type here connect String which is XE or any Connect String.
*TCP.
*Click Next.
*Host Name--Enter here Computer name or Ip address.
*Yes,Perform a test.
you can enter correct password and username here.
Note:- your Database should be Up if its not Up it will through the same error so plz startup your database first.
sarah

How install Oracle Developer Suite 10g for Linux (Including Forms & Reports

hi
i want to install Forms & Reports Developer Suite in Linux OS So i have downloaded From OTN Site
"Oracle Developer Suite 10g for Linux (Including Forms & Reports)"
These are the File's i have Downloaded:
as_linux_x86_ids_101202_disk1.cpio
as_linux_x86_ids_101202_disk2.cpio
so in the Oracle Documentation Site they have given Guide as Follows:
$cpio -idmv < as_linux_x86_ids_101202_disk1.cpio
$cpio -idmv < as_linux_x86_ids_101202_disk2.cpio
after that what should i do ...
How to Install Oracle Developer Suite 10g for Linux (Including Forms & Reports)
Kindly Reply ASAP

Pl follow the steps in the Install Guide - http://download.oracle.com/docs/cd/B19375_02/doc/frs/install/B19314_02/toc.htm
Srini

How to configure webutil 1.06 with oracle Developer suite 10g R2

Hello everyone,
My computer configuration is
OS-> Windows 7 Ultimate (32-bit)
RAM-> 1GB
I have successfully installed oracle XE and developer suite 10g R2 in my computer. Now i want to configure webutil. Please give me the step-by-step procedure for it.
Thanks in advance.

hi
plz search this forum u will find so many answered threads anyways.
plz read the following.
Webutil Settings
Requirements
·     Download Jacob 1.8 archive and webutil 1.06
(Download http://prdownloads.sourceforge.net/jacob-project/jacob_18.zip
   and extract to a temporary staging area. Do not attempt to use 1.7 or 1.9.
webutil can be downloaded from http://otn.oracle.com )
Database Setup
     Login as SYS
      create user webutil identified by webutil
              default tablespace users
                  temporary tablespace temp;
     grant connect, create session, create procedure, create public synonym to webutil;
     grant resource, connect to webutil;
     grant execute on dbms_lob to   webutil;
     login as webutl user and run
     create_webutil_db.sql
     create public synonym webutil_db for webutil.webutil_db;
     grant execute on webutil_db to public;
          set serveroutput on
declare
    a boolean;
begin
    a:=webutil_db.closeblob(1);
    If a then
        dbms_output.put_line('webutil/blob setup '||'TRUE');
    else
        dbms_output.put_line(' webutil/blob setup '||'FALSE');
    end if;
end;
copy jacob.jar and copy frmwebutil.jar to ORACLE_HOME/forms/java directory.
    Make sure you can download these using the below
     http://machinename.com/forms/java/jacob.jar
     http://machinename.com/forms/java/frmwebutil.jar
Create directory webutil under [OraHome]/forms/webutil and .
       copy jacob.dll , JNIsharedstubs.dll, d2kwutil.dll
     Check the permissions. Read /Execute
Forms.conf   AliasMatch ^/forms/webutil/(..*)
$ORACLE_HOME/forms/webutil/$1"
          http://machinename.com/forms/webutil/jacob.dll
          http://machinename.com/forms/webutil/JNIsharedstubs.dll
          http://machinename.com/forms/webutil/d2kwutil.dll
In the default.env update
     WEBUTIL_CONFIG=/opt/oracle/product/10gas/forms/server/webutil.cfg
       CLASSPATH=c:\temp\webutil\lib\frmwebutil.jar;c:\"Program      Files"\Java\j2re1.4.2_06\lib\rt.jar (Include rt.jar)
     Also include C:\Dev10g\forms\java\ frmall.jar
Settings for     webutil.cfg
     logging.file=c:\temp\webutil.log
     logging.enabled=TRUE
     logging.errorsonly=TRUE
     logging.connections=TRUE
     transfer.database.enabled=TRUE
     transfer.appsrv.enabled=TRUE
     transfer.appsrv.workAreaRoot=<Enter Directory /folder on Server>
     transfer.appsrv.accessControl=TRUE
     transfer.appsrv.read.1=<Enter Directory /folder on Server>
     transfer.appsrv.write.1=<Enter Directory /folder on Server>
Entry in the formsweb.cfg
[webutil]
     WebUtilArchive=frmwebutil.jar,jacob.jar
     WebUtilLogging=on
     WebUtilLoggingDetail=normal
     WebUtilErrorMode=Alert
     WebUtilDispatchMonitorInterval=5
     WebUtilTrustInternal=true
     WebUtilMaxTransferSize=16384
     baseHTMLjinitiator=basejpi.htm
     baseHTMLjpi=webutiljpi.htm
     #archive_jini=frmall_jinit.jar
     lookAndFeel=oracle
     form=WELCOME.fmx
     userid=webutil/Webutil$123@ORCL
     width=955
     height=545
     jpi_download_page=https://java.sun.com/products/archive/j2se/1.4.2_09/index.ht     ml
     jpi_classid=clsid:8AD9C840-044E-11D1-B3E9-00805F499D93
     jpi_codebase=https://java.sun.com/products/plugin/autodl/jinstall-1_4-windows-     i586.     cab#Version=1,4,0,0
jpi_mimetype=application/x-java-applet;version=1.4
Sign jacob.jar ( Not mandatory )
   Open a DOS command prompt.
   Add [OraHome]\jdk\bin to the PATH:
      set PATH=[OraHome]\jdk\bin;%PATH%
   Sign the file, and check the output for success:
      [OraHome]\forms\webutil\sign_webutil [OraHome]\forms\java\jacob.jar
[Previously this point stated that frmwebutil.jar also needed to be signed. This is no longer necessary and should not be done.]
Start Forms Builder and connect to a schema in the RDBMS used in step (4).
   Open webutil.pll, do a "Compile ALL" (shift-Control-K), and generate to PLX (Control-T).
   If the PLX is not generated, the Webutil.pll library would have to be attached with
   full path information to all forms wishing to use WebUtil. This is NOT recommended.
Create a new FMB.
       Open webutil.olb, and Subclass (not Copy) the Webutil object to the form.
        There is no need to Subclass the WebutilConfig object.
        Attach the Webutil.pll Library, and remove the path.
         Create a new button on a new canvas, with the code
               show_webutil_information (TRUE);
   in a WHEN-BUTTON-PRESSED trigger.
        Compile the FMB to FMX, after doing a Compile-All (Shift-Control-K).
   Under Edit->Preferences->Runtime in Forms Builder, click on "Reset to Default" if
            the "Application Server URL" is empty.
   Then append "?config=webutil" at the end, so you end up with a URL of the form
     http://server:port/forms/frmservlet?config=webutil
Compile the webutil.pll and attach it to the fmb. Compile it
Debugging
Clear the browser cache and enable the jinitator / sun java plugin.
For Sun Java Plugin
Start ->Settings ->Control –Panel->Java->Advanced ->Show Java Console
Debugging ->Select All
              Clear the plugin cache and once again access the URL. Make sure all the dlls,jar files
are getting downloaded.
FRM-92050   failed to connect to server /forms90/;90serlvet -1
   oracle.forms.net,connectionexeption : form session failed during startup.
Java console shows -
When you are not able to download the webutil.jar file
java.lang.ClassNotFoundException:
java.io.IOException: open HTTP connection failed.
     at sun.applet.AppletClassLoader.getBytes(Unknown Source)
     at sun.applet.AppletClassLoader.access$100(Unknown Source)
     at sun.applet.AppletClassLoader$1.run(Unknown Source)     at
java.security.AccessController.doPrivileged(Native Method)
at sun.applet.AppletClassLoader.findClass(Unknown Source)
Cause
Ensure that the ORACLE_HOME in the .Env file points to a correct home.
Frm-40735 when-custom-item-event triger raised unhandled exception ora-06508
Cause
Ported webutil to Unix . The form appears , but when a call is made to webutil
functions, it resulted in the above error .The reason was PLL was not compiled
on unix .
Reference
Metalink Note 418970.1 ORA-06508 When Starting Webutil
Read / Write - image file
The code was not erroring out, but the image was not getting copied in the
image item .
Cause
transfer.appsrv.workAreaRoot=<name of the temp directory >
transfer.appsrv.accessControl=TRUE was not specified in the webutil.cfg file
The root of the location in which WebUtil can store temporary files
uploaded from the client.
While Writing Image file ( remember its the client to which the image
is written to ).
Example
client_image.write_image_file('d:\myimg\','GIF','CTRL.MY_IMG',
maximize_compression,     original_depth);
Then ensure that on the thin client , there exist a directory called as "myimg" in the D drive .
One should watch out for the error in the console or the log depending on how
the logging has been set to .In case if the directory does not exist on the
client message appears that cannot create a file ...
These are the steps that occurs -
1) WebUtil creates a working directory that is private to the user
on the applciation server using the value of transfer.appsrv.workAreaRoot
This is that <ipaddress>\<ntuser name> directory
2) The basic forms Write Image file is used to extract a temporary copy
   of the image into that directory.
3) The image is downloaded into the client machine and saved as the name
   that you specified as the filename in the write_image_file command.
4) The temporary copy of the image held in the workAreaRoot on the Appserver
   is cleaned up.
4) Client_host - The command is supposed to run the executable on the client .
   But if you are trying to call an exe which is not in the path , you will not
   get any error.
Error Message while opening the fmb in the forms builder
Add jacob.jar and frmwebutil.jar to CLASSPATH or FORMS_BUILDER_CLASSPATH ... otherwise there is an error message when opening the canvas in the new created fmb
{code}
hope this helps u.
sarah

Login vào Oracle Developer Suite 10g, HOW ?

I already installed a package of Oracle Developer Suite in my pc.
During installing progress, it does not require me to setup user name and passowrd, but it ask me about username, password and Connect String when I use Oracle Designer or other tools in the package.
Does anyone know what default username, password and the string is to login ?
Beside that, how to reset the default username, password following to my option.

It seems OP has NO database at all,neither local nor remote. And 'installed on PC' looks like homework,no remote access to databases. So a local database has to be installed, the '2 Day DBA' tutorial may help:
http://download.oracle.com/docs/cd/B19306_01/server.102/b14196/toc.htm
By the way 'scott/tiger' doesn't help when dealing with Developer Suite and Designer.
Werner

How to install Oracle Developer Suite 10g (10.1.2.0.2) for Linux

Hi All,
Please let me know how to install oracle forms on Linux red hat. I need to configure it with oracle database 10gR2. Please provide me step by step installation and configuration giude or you can pass on readme file which comes with the software.
Thanks,
Rahul

user8722581 wrote:
Hi ,
Given link is good and I can understand the architecture that it will be 3 tier--DB server-Application Server and Web Browser where Developer will access forms.
I would appreciate if you can provide some screen shots for the configuration details and files to be modified for the port and deploying the forms.
Whether we need to install apache,http or oracle application suite for the linux will take care?
Is there any pre-requisite health checktool like RDA.sh for the rdbms? Please let me know what are the important configuration file.
What is identity management in this?
Thanks.
Edited by: user8722581 on May 8, 2013 11:07 PMAll pre-req. are covered in the installation manual -- http://docs.oracle.com/cd/B19375_07/doc/frs/install/B19314_02/toc.htm
Thanks,
Hussein

How to run SSO registration tool in Oracle SOA Suite 10g

Hi,
I want to enable SSO for applications running in SOA Suite.
All the documentation discuss about enabling OSSO in Oracle Infrastructure or Oracle Identity Server but not for SOA Suite.
The biggest issue is SOA Suite doesnot has ORASSO application in it, so please guide me how to implement O-SSO in SOA Suite.

When you refer to the SOA suite, are you talking about the HTTP Server and OC4J or the BPEL products?
For HTTP server and OC4J, implementation is done like that of a AS10g middle tier. You need to run the SSO registration tool and configure the containers to use SSO. To do this you need to have a IDM 10.1.4 installed somewhere else.
Regards,
Luis

How to install Oracle Developer Suite 10g on Windows 7 (64-bit)

Hi,
I have windows 7 (64-bit) installed on my laptop. I want to install Oracle developer suite 10g R2 on this machine but when I run the Oracle Universal Installer, it gives me error stating "operating system version: must be 5.0, 5.1, 5.2. Actual 6.1 Failed<<<<
Exiting OUI.
Can anyone please help me to solve this problem.
Thanks in advance.
Regards

Be aware that Developer Suite 10gR2 is not supported for use on Windows 7. Installing it on this platform may result in undesirable behavior.

How can i install oracle developer suite 10g on centos 5.5

Hello all ,
i would like to install oracle developer suite 10g on centos 5.5
Thank's all :)

CentOS is not a supported distro for installing Dev Suite 10g - http://www.oracle.com/technetwork/middleware/ias/downloads/as-certification-r2-101202-095871.html
Unless you use a certified OS, you are on your own
HTH
Srini

How to get oracle developer suite 10g cds

hi,
i want to learn oracle developer suite 10g. i did not have net to download that much capacity files from oracle OTN. can u please suggest me where can i get the Developer suite cds in India.
please help me
Thanks
RAM PRASAD

i used dsl to download , if ur net access is not available contact me at
[email protected] and will send u the cds.
zaibi.

How to logon to Oracle Developer Suite 10g?

I have installed Oracle Developer Suite 10g on my Windows XP Home Edition.
But I don't know what to enter in the "logon dialog box".
And after all, what is user/id/conncetstring?

Hi Do you have a backend database? If then configure it and use that user/pwd/connectstring. Else install database and use.
Regds,
Thomas

How to make Oracle Developer Suite use different Oracle client version

Hello,
I have installed Oracle Developer Suite 10g (9.0.4) on Win7 32bit
When I run Oracle Forms or Oracle Reports or any DB tool (like SQL Navigator or PL/SQL Developer) and trying to connect to remote Oracle DB 10g (10.2.0.5.0) I get an error ORA-02248: invalid option for ALTER SESSION.
Then I've installed Oracle Instant Client 10.1.0.4.0 and made DB tools use this client and error was gone, but I still get that error using Forms and Reports.
So my qustion is, can I make Oracle Forms and Reports use any other Oracle Client but that was installed with Oracle Developer Suite? Or any other suggestions are welcome how to fix connection issue in Forms and Reports?
I have read many threads and some suggested to set NLS_LANG. Done that, but it didn't help :(

The better question is why are you trying to use an obsolete Oracle product on such a new OS and expecting it to work properly? Are you also using MS Office 95 on this machine? Attempting to hack a solution is fine if you are just learning to use a product or just playing around. However, I would never recommend attempting to do what you are doing.
Oracle Forms 9.x was desupported years ago, long before Windows 7 was released. Trying to use it in this manner is risky at best and not something that should be done in a professional environment. If you are a student or just home user trying to learn on your own, I would recommend that you use a virtualization product like Oracle Virtual Box and create a vm of an older OS. For example XP, then install on that platform. If you are a licensed user of Win 7 Pro or higher, I believe Microsoft is still giving away (for free) "XP Mode". Details here:
http://www.microsoft.com/windows/virtual-pc/download.aspx

How to install Oracle Developer Suite 8 on windows 8 64bit

Hi, everyone.
I have facing problem. How to install Oracle Developer Suite 10g on windows 8. Please send me step by step install.
Thanks
Mbulur.

No version of Forms/Reports is currently supported on Windows 8. Also, because Error Correction support for versions older than 11 have ended, no new certifications will be provided for those versions. I would recommend you consider upgrading to Forms/Reports 11.1.2.1 as we are hoping for Win8 certifications in the future for this version.

I cannot figure out how to make the text larger on an incoming email. The finger method doesn't work and I cannot find any toolbar with which to do it. I could find nothing in settings also. Plese help and thank you.

I cannot figure out how to make the text larger in a received email. The finger method doesn't work and I can find no tool bar as I can for composing emails. I can find nothing in settings. Please help and thank you in advance.

Hi there,
Download a piece of software called TinkerTool - that might just solve your problem. I have used it myself to change the system fonts on my iMac. It is software and not an app.
Good wishes,
John.

How to make the text in sub-division

Hi,
I am usign text module in my adobe forms.
Text in text module contains sub-divisions as a), b) and c). Each sub-division are in a separate line.
While in pdf, all the sub-division combines and comes a single paragraph.
What would be the problem for this issue? Any Idea?
May I know how to make the text in sub-division as in text module?
Thanks,
Thiyagu
Edited by: Thiyagu on Oct 26, 2009 7:08 PM

Hello, experiment with Object - Field tab. Do you have your text field with "allow multiple lines" checked? I guess so. And what about the field format? Plain text or Rich text? Please try:)) Regards, Otto

How to make a text formatting tools in oracle developer suite 10G R2

Similar Messages

Maybe you are looking for