How to make a window disable/enable in run time in webdynpro application

Hi all,
1) my requirement is in run time i want to make the content of a window in disable mode?
2) and again it should display in enable mode when we perform some action?
thanks & regards
naveen
Moderator Message: This has been covered numerous times in this forum. Also, the forum is not a free consulting service here to do your job for you.
Thread locked
Edited by: Neil Gardiner on Nov 22, 2010 9:27 PM

Hi,
You will not be able to do this with a standard radio button, as each one will be in a separate instance of the row.
The easiest way is to use a checkbox (as you can script this on/off) and then make it look like a radio button.
Example here:
https://acrobat.com/#d=sasUNmniOUgs3MwY-p4H8Q
Hope that helps,
Niall

Similar Messages

How to make a text field required at run time when the user clicks the checkbox ?

I got a form where , there are several checkboxes and text fields associated with that checkboxes.If the use clicks on the check box then the associated
text fields should become required.I have tried the change event and the click event for the checkboxes.It gives error in the onChnage event and I got some weird results in the on click event .Sometimes if the user click the check box , then for the 1st time the field doesnt become required , then the user onclicks the check box and when the user clicks the checkbox for the second time the field becomes required,but if i deselects the highlighted field option and selects it again the field becomes required even if the user onchecks it I am totally confused !!! Adding to it i have also written the wrong code still i achieved the desired result ?? How it can be possible . I am writing the codes below , please help me as i am working under a deadline from the client.
onChange event :
var newVal = this.boundItem(xfa.event.newText);
if(newVal == 0)
    xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row4.Purchasecost3_1" ).validate.nullTest = "disabled";
else
     xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row4.Purchasecost3_1" ).validate.nullTest = "error";
For the onClick event :
var a = xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row2.CostItemRecovere d_OnlyEnergyCharges").rawValue;
//app.alert(a);
if(a == 0)
    xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row4.ComplianceCheck_ L1_1").validate.nullTest = "error";
if(a == 1)
      xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row4.ComplianceCheck_ L1_1").validate.nullTest = "disabled";
   Please help someone !!!

I used the onchange event and wrote the code for it. I got the result . But there is a problem.All these fields are in a table and it's a dynamic table where you can add rows dynamically at the run time .I have other change event for some fields in this table .All are working fine when i add the row.But for this check box the required fields are not validated as required at the run time . I am here giving the code , Please help me .
form1.Subform0.Subform1.Subform9.Subform10.Table48.Row2.CostItemRecovered_OnlyEnergyCharge s::change - (JavaScript, client)
if(this.rawValue == "1")
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row4.ComplianceCheck_ L1_1").mandatory= "error";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row4.ComplianceCheck_ L2_1").mandatory= "error";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row5.ComplianceCheck_ L1_2").mandatory= "error";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row5.ComplianceCheck_ L2_2").mandatory= "error";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row6.ComplianceCheck_ L1_3").mandatory= "error";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row6.ComplianceCheck_ L2_3").mandatory= "error";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row7.ComplianceCheck_ L1_4").mandatory= "error";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row7.ComplianceCheck_ L2_4").mandatory= "error";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row8.ComplianceCheck_ L1_5").mandatory= "error";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row8.ComplianceCheck_ L2_5").mandatory= "error";
else
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row4.ComplianceCheck_ L1_1").mandator = "disabled";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row4.ComplianceCheck_ L2_1").mandatory = "disabled";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row5.ComplianceCheck_ L1_2").mandatory = "disabled";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row5.ComplianceCheck_ L2_2").mandatory = "disabled";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row6.ComplianceCheck_ L1_3").mandatory = "disabled";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row6.ComplianceCheck_ L2_3").mandatory = "disabled";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row7.ComplianceCheck_ L1_4").mandatory = "disabled";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row7.ComplianceCheck_ L2_4").mandatory = "disabled";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row8.ComplianceCheck_ L1_5").mandatory = "disabled";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row8.ComplianceCheck_ L2_5").mandatory = "disabled";

How to make a field read only at run time by entering the value in another field.

Hi Team,
Recently i got a requirement , i Have 2 dff's at header level and line level related to down payment ,and the DFF having two fields such as amount and if i enter amount that should be converted into % then populate the total amount field, at the same time % field should be gray out . if i give %(percentage) then amount field should be grayed out(read only) and then it should populates towards the total amount at header level.
Can any one help me on this issue.
Thanks,
raghava

I would to elaborate this issue...
I have DFF's enabled at Header level and line in Purchasing Module -->Buyer WorkBeanch --> Order page here they did, as "Details". Details contains two Filed's
1. Amount
2.Percentage (%)
Requirement :
i.if i enter "down payment amount" then "down payment %" going to become read only. vise verse.
ii. If I enter "down payment amount " or "down payment %" at header level then not allowing to enter at line level .
thanks,
raghava

How to Make the fields Delta enabled or Change pointer enabled in R/3

Hi ,
I have a scenario, in which we are using the DS 0CUSTOMER_ATTR to load the master data.There are some fields added to this data source but this fields are not delta enabled i.e. when these fields change in R3 it does not write to Change Pointers ( and hence no delta ). For this reason every week we have to do a full load which takes very long.
Can any one suggest how to make this fileds delta enabled or how to know weather these fields are writing the Change pointers or not in R/3 when they change?
Regards,
Vishnu

Hi Vishnu,
In your case you need to build the logic for your custom fields as you have enhanced the Business Content DS..
The way you can build the logic would be using the CDHDR and CDPOS tables if the changes are recorded in those tables.
The above tables contain any changes done to any documents..
Let me know if it helps..
Best Regards
Avinash

How to make ENTER key in internet explorer run the BIP report?

In BI publisher 11g, users wanted that after entering the values for the parameter, they hit the ENTER key ( on the keyboard) and the report should run .
In Mozilla firefox, when I hit ENTER key on the keyboard report runs fine... but in Internet explorer, it does not ( infact in internet explorer TAB key works)
How to make ENTER key in internet explorer run the report?
Thanks
Ashish

Perform the following steps and tell us if it resolve this issue:
1. In Internet Explorer, click Tools, and then click Internet Options.
2. Click the Security tab.
3. There are four security zones listed:
* Internet
* Local intranet
* Trusted sites
* Restricted sites
Click the zone being used by P6, which is noted at the bottom right hand corner of the browser window when the P6 URL is being accessed.
4. Under Security level for this zone, click Custom Level.
5. Under Downloads, under Automatic prompting for file downloads, click Enable, and then click OK two times.
6. The browser will need to be restarted for the change to take effect.
Refer to the following Microsoft Knowledge base article for additional file download and active x controls which should also be enabled: http://support.microsoft.com/kb/883255

How to make more than one partition on Airport Time Capsule?

how to make more than one partition on Airport Time Capsule?

Only for the very brave......
Open up the Time Capsule (voids the warranty)
Pull the hard drive
Place the hard drive in a separate enclosure
Connect the enclosure directly to your Mac
Use Disk Utility to partition the hard drive
Reinstall the hard drive back in the Time Capsule
For the rest of us.....
The next best thing might be to set up one or more disk images on the Time Capsule, which will allow you reserve a given amount of space for each disk image.
Open up Macintosh HD > Applications > Utilities > Disk Utility
Click on the New Image tab
Navigate to the Time Capsule
Set up the disk image by naming it and specifying how much space you want to reserve

How to make a button to stop and run a for loop?

How to make a button to stop and run a for loop? and if it is stopped it shall start from where i t stopped.

Your VI has some very fundamental flaws.
The start/stop button is outside the FOR loop, thus it will NOT get read during execution of the FOR loop, but only before the FOR loop starts. Think dataflow!
Thus the terminal of the start/stop button belongs inside the FOR loop.
Your FOR loop iterates 20x, which probably takes about a nanosecond. You will NOT be fast enough to reliably press the start/stop button during a specific iteration of the FOR loop.
Your code does not "stop and run" a FOR loop (sic). The loop always spins, but executes an empty case when "Stopped". I guess that's what you actually want?
Once you solve (2), the x indicator will contain a random value whenever you "stop".
As soon as the 20 iterations complete, the outer while loop spin an things start over, another nanosecond later.
Place e.g. a 500ms wait inside the FOR loop to solve this.
Don't place terminals of indicators on top of formula nodes.
Your formula does not produce any output, so really has no purpose.
Use a real "stop" button to terminate the while loop (mechanical action: latch when released). Right now you are using a plain switch, which does not reset to false before the next run. This means that you need to manually reset it before running the program again.
It is oftern useful to operate the VI in execution highlighting mode. You will immediately see that your button does not get read during execution of the FOR loop. Try it!
LabVIEW Champion . Do more with less code and in less time .

How to drag and drop a picture at run time in a window displaying pictures?

How to drag and drop a picture at run time in a window displaying pictures on the front panel. The main thing is that the window is displaying frames continuously?

vivman,
So from your description you have a picture control where you've already created an image and you'd like to drag an image around inside of the picture control. This can be done although it is going to take a significant amount of research and programming on your behalf. You can use the drag event in the event handler to find out when the drag occurs and where the cursor is. Then edit the picture as you move your mouse so that when you drop the picture gets updated.
The even structure is a somewhat advanced topic and the drag and drop feature is one of the more advanced uses of this structure. I would search the example finder (help>>find examples) for "event" and "drag" to see how to use these events. Also you'll want to look at the examples for the picture control.
Sounds like a cool project! Check out Darren's Weekly Nugget 10/30/2006 this topic (http://forums.ni.com/ni/board/message?board.id=170&message.id=212920). It might prove useful.
Good luck!
Chris C
Chris Cilino
National Instruments
LabVIEW Product Marketing Manager
Certified LabVIEW Architect

How can i update data in JTable at run time ?

i am trying to build a client/server architecture for conducting quizzes & online tests.. My client will return a object to the server after the test is over, which contains details about the participant, his score and other details. i am putting the incoming object to an Vector. I'll create a new thread each time for the incoming connection and insert the object to the Vector.. Now, please tell me tat, how can i update my table automatically at run time so tat, my table is updated whenever a new object is entered into vector..
here is my code for the table..
public class MyTableModel extends AbstractTableModel {
    String columNames[] = { "ID", "NAME", "COLLEGE", "SCORE", "CELL" };
    /** Creates a new instance of MyTableModel */
    public MyTableModel() {
        Main.List = new Vector();
        SetDefaultData();
    public int getRowCount() {
        return Main.List == null ? 0 : Main.List.size();
    public int getColumnCount() {
        return columNames.length;
    public String getColumnName(int column) {
        return columNames[column];
    public boolean isCellEditable(int row,int col) {
        return false;
    public Object getValueAt(int rowindex, int columnindex) {
        if(rowindex < 0 || rowindex >= getRowCount())
            return "";
        Student row = (Student)Main.List.elementAt(rowindex);
        switch (columnindex)
            case 0 : return row.id;
            case 1 : return row.name;
            case 2 : return row.college;
            case 3 : return row.score;
            case 4 : return row.cell;
        return "";
    public String getTitle() {
        return "Student Table";
    private void SetDefaultData() {
        Main.List.removeAllElements();
        Main.List.addElement(new Student("CS041","Keerthivasan M","MNM",95,"9884326321"));
        Main.List.addElement(new Student("CS012","Arun M","MNM",90,"9884825780"));
        Main.List.addElement(new Student("CS019","Balaji S","MNM",79,"9841742068"));
        Main.List.addElement(new Student("CS005","Anand R","MNM",89,"9884130727"));
        Main.List.addElement(new Student("CS045","Manish J","MNM",55,"9841624625"));
        Main.List.addElement(new Student("CS013","Mangal S","MNM",5,"9841961742"));
}

In the future Swing related questions should be posted in the Swing forum.
how can i update my table automatically at run time so tat, my table is
updated whenever a new object is entered into vector..You don't update the Vector directly. You should be creating a method in your TableModel, called "addRow(...)". This method will do two things:
a) add the Student object to the Vector
b) invoke the fireTableRowsInserted(..) method of AbstractTableModel. This will cause the table to be repainted.

How can i see Log information of Report Run Time?

Hi Gurus,
How can i see Log information of Report Run Time?, till now i am counted report run time manually. Is there any way i can see the workbook running time in log information?.
Thanks & Regards
Vikram

There could be a few things -
At one time, you needed to run a separate script to create the tables. I'm not sure that is still the case. If you check the Administrators guide, look into the chapter that deals with the EUL Status Workbooks.
If you are not logged on as the eul owner, you may not have select privileges, or you may need to qualify the table with the schema (if there is no synonym) - select * from <eul_owner>.EUL5_QPP_STATS;
If you are on 4i, the table is EUL4_QPP_STATS

Make a item flexfield mandatory at running time

Hi everybody,
I am going to ask something that maybe is not very normal, but, my client really want it.
I have a descriptive flexfield with several itmes. We want to make one ot these items mandatory at running time based on one condition but in the flexfield definition this item is not mandatory.
We hava tried by personalization but is not possible.
Thank you very much,.

Duplicate post, possible solution on this thread:
Make a item flexfield mandatory at running time
Regards,
Gareth

How We Can Change Page Size During Report Run Time

Hello !
How We Can Change Page Size During Report Run Time .
How can we stop to change the column name when we amend a sql in report data model.
Thanks !
null

hello sohail
1. question - i'm afraid this cannot be done ... bit in report 6 and newer you have posibility to divide your report in 3 parts (former header, body, trailor) and each part can have diferent page siz, orientation , ...
2. question - best is give each column in your statements in one report diferent alias. when you have to chnge something, alias will remain same ...
try this: select 1 as fist_column, 1 as second_column from dual
hope this helsp

How to make the custom field enable/disable in ME21n/ME22n/ME23n trans

Hi Experts,
I need help.
I have created one custom field in the transaction ME21n/ME22n/ME23n under customer data 2 tab. But my problem is the field is always in enable (means editable only) even in Display mode. How to make the field is non editable in display mode and editable in change mode.
I have tried by putting some logic to make that field to change alternatively according to change/display button. And it is working fine but if we click any othe button , this field is becoming editable even in display mode.
How to make this field to behave as standard fields?
Please reply me <removed by moderator>
Thank you in advance.
Best Regards,
Divakar.
Edited by: Thomas Zloch on Mar 2, 2012

If you have BADI implimented for custom tabs then you can do this in method ME_PROCESS_PO_CUST~FIELDSELECTION_ITEM
lv_changeable = im_header->is_changeable( ).
LOOP AT ch_fieldselection ASSIGNING <fs>
    IF lv_changeable IS INITIAL.
      <fs>-fieldstatus = '*'. " Display
    ELSE.
      <fs>-fieldstatus = '+'. " Change
    ENDIF.
endloop.

Hi Experts.. How to make scripts & SmartFrom Unicode enable

Hi Experts..
How to make Scripts & Smart From Unicode enable? i know for scripts we need to check with driver program &
For smart from we need to check the generated function module. Correct me if am wrong.
I wanna to know how to make layouts & from Unicode conversion....or enable??
Thanks In Advance
Santosh.S
Points for sure ...

Hi Donghai,
Have you tried using the command
CHAIN ENDCHAIN.
Try displaying the message for te field you wish to within CHAIN and ENDCHAIN which will allow you to enter the data in the field even after the error message is displayed.
Caution: Mention all the field names in CHAIN and ENDCHAIN which you want to be open for enterin the values into it.
Thanks and Regards,
Kunjal Patel

How to make some fields disable mode in BAPI?

Dear sir,
I want to know in Bapi, In Import parameters of output display screen as we are entering values i want to make some fields disable mode (as in report program, in output screen, suppose 2 entry fields are der so i need only one and another one in disable mode)how to do in BAPI? please explain with example by taking 2 or 3 predefined tables? and in Bapi how to do ranges programs.. please explain with example? is it posiible in bapi to display the output in ALV_GRID method?
regards
patil

Hi Rachu Patil,
I think there is no posibility to disable fields in import parameter of bapi but you can select optional check box to make the field as an optional field in import parameter. Like wise you cant set range. If you want to set range than declare two variable for low and high.
Regards,
Harish

How to make a window disable/enable in run time in webdynpro application

Similar Messages

Maybe you are looking for