How to make an exception to RDS session Idle Time Limit?

A little bit of background:
We are running WYSE Thin Clients to connect to a RDS server farm at our company. We have set the Idle Session Time Limit to 12 hours, in Remote Desktop Session Host Configuration (in Connection --> Properties --> Sessions tab). This limit
is a site requirement.
The issue: We would like to configure a few accounts to stay logged into the RDS server indefinitely, past the 12 hour limit. How can we do this without changing the time limit for everyone?
I have tried a script to simulate mouse movements/key presses at intervals on the client session to trick RDS, but Remote Desktop Service Manager does not show that the script affects the idle time for that client. Is there another automatic way to simulate
user input to keep the client session active? What kind of hardware interrupt is RDS hooking into to determine that a human input has been pressed? A script would be the least intrusive to our infrastructure so if it is possible this is definitely preferred.
I've heard that Group Policy may be a solution here - but our local IT department do not have admin access to the Domain Controller for our site, it is managed by a third party. However, if I were to solve this using group policy, what would be the
steps? I would appreciate a step-by-step walk through if it is possible. We would have hundreds of users that need the 12 hour limit applied, and only a few that needs the infinite logon - so please keep practicality in mind.
Thanks in advance to anyone who helps.

Hi,
Thank you for posting in Windows Server Forum.
In your case, I would like to suggest the steps for you. Yes, you need to take this successful via group policy.
You can create 2 group: Just for reference:
Group 1- MinLoginTime
Group 2-MaxLoginTime
Add the required users to particular group.
Users upto 12Hrs- MinLoginTime
Users above 12 Hrs- MaxLoginTime
Now need to apply group policy setting on this required groups.
Group 1- MinLoginTime:
Set time limit for active but idle Remote Desktop Services sessions-
Enable -Set 12 Hrs
End Session when time limits are reached- Enable
This is because it will disconnect the session of your users who reached to 12 hrs.
Group 2-MaxLoginTime:
Set time limit for active but idle Remote Desktop Services sessions-
Not configured\Disable
If you disable or do not configure this policy setting, this policy setting is not specified at the Group Policy level. By default, Remote Desktop Services allows sessions to remain active for an unlimited amount of time.
You can find the above setting option under below mention path.
Computer Configuration\Policies\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Session Time Limits
User Configuration\Policies\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Session Time Limits
Note: These Group Policy settings will take precedence over the settings configured in Remote Desktop Session Host Configuration. If both the Computer Configuration and the User Configuration policy settings are configured, the Computer Configuration policy
settings take precedence.
More information:
Configure Timeout and Reconnection Settings for Remote Desktop Services Sessions
http://technet.microsoft.com/en-us/library/cc754272.aspx
Hope it helps!
Thanks.
Dharmesh Solanki

Similar Messages

How to make more than one partition on Airport Time Capsule?

how to make more than one partition on Airport Time Capsule?

Only for the very brave......
Open up the Time Capsule (voids the warranty)
Pull the hard drive
Place the hard drive in a separate enclosure
Connect the enclosure directly to your Mac
Use Disk Utility to partition the hard drive
Reinstall the hard drive back in the Time Capsule
For the rest of us.....
The next best thing might be to set up one or more disk images on the Time Capsule, which will allow you reserve a given amount of space for each disk image.
Open up Macintosh HD > Applications > Utilities > Disk Utility
Click on the New Image tab
Navigate to the Time Capsule
Set up the disk image by naming it and specifying how much space you want to reserve

How to make it repleatedly printed out by using timer??

Dear Friends:
I have following code to run, When I press R to repeat println, only 1 line print out,
But I hope to make it continueously print out.
How to make it repleatedly printed out until I press CTRL + C key ??
Thyanks
import java.util.*;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import java.io.*;
public class CertainAndRepeatTime{
public static void main(String[] args) throws IOException{
    int delay = 1;
    Timer timer = new Timer();
    ActionListener actionListener = new ActionListener() {
        public void actionPerformed(ActionEvent actionEvent) {
          System.out.println("Hello World Timer");
    System.out.println("What do you want (Certain time or Repeat time)?");
    System.out.print("Please enter \'C\' or \'R\' for that: ");
    BufferedReader in = new BufferedReader(new InputStreamReader(System.in));
    String ans = in.readLine();
    System.out.print("Please enter ans=" + ans + " IsTrue= " + (ans.equals("R") || ans.equals("r")) +"\n");
    if (ans.equals("C") || ans.equals("c")){
      //System.out.println("This line is printed only once start...");
      timer.schedule(new TimerTask(){
        public void run(){
          System.out.println("This line is printed only once.");
      },delay,1);
    else if(ans.equals("r") || ans.equals("R")){
      timer.schedule(new TimerTask(){
        public void run(){
          System.out.println("This line is printed repeatedly.");
      },delay, 1000);
    else{
      System.out.println("Invalid Entry.");
      System.exit(0);
    System.exit(0);
}

The Timer is working fine, but because it runs in another Thread, your program is ending before the Timer can repeat.
The simplest way to make your program wait until it is force-quitted as you describe would be to make an infinite loop (although this isn't very good practice), like this:
    else if(ans.equals("r") || ans.equals("R")){
      timer.schedule(new TimerTask(){
        public void run(){
          System.out.println("This line is printed repeatedly.");
      },delay, 1000);
    while(true){} //This will make your main thread hang.
    }A better way, though, would be to listen again with your System.in reader until they enter a letter that means quit.

How to make repricing for specific conditions at the time of billing?

Hello
I'm SD Pricing person. Let me ask here experts below my concern.
In EU countries, there is recycling fee in sales of electronics or Note PC with batteries....to keep our earth clean.
So when customers buy such products, they have to pay more as recycling fee including invoice amount.
My question is... we want to make repricing for recycling conditions when the billing is created.
Based on our configuration, recycling condition is not defined as a kind of tax condition.
So this value is just copied from sales order.
(pricing type in copy control is 'G' which means repricing for tax condition.)
In this situation, we want to make repricing for those conditions during operating system.
Is there any easy way to cover this?
As I think, this is not easy because the system is already operated.
To change condition attribution is really risky. If we dare do, we have to migrate all open orders.
So I want to put this way to the end of my choice.
For this requirement,
1. We have to change condition class or category or calculation type in order to be repriced based on pricing type 'G'.
(ex. Set the condition category as 'I' inter-billing or 'L' always repricing.)
But transaction data are created now and all open orders will be affected.
2. To create new conditions are not easy because these conditions are mapped to the CO-PA value field and the values are posted in FI doc.
3. To change pricing type in copy control is almost impossible because of the impact.
What can I do this in this situation?
What I want to do is just to make repricing for specific conditions at the time of billing in case that pricing type of copy control is 'G'.
Thank you in advance.

Let me ask agagin to all experts.
I want to make A condition to be repriced at the time of billing.
For this, I have to set condition category as 'L' (Generally new when copying).
But I do not want to do in that way becauuse I am maintaining big operated system now.
In addition, though I migrate open orders after changing config. as 'L', it is almost impossible for use to migrate because we have more than a thound open orders per a DAY as Globalized system.
That is why I am asking.
Simply I can create new condition but as I mentioned, there are various recycling fee so we already created about 10 conditions. And this recycling conditions are linked to REA package of SAP. So creating another 10 more conditions can not be a way for us.
At last, what I want is not to be shown this condition only in billing doc.
'A' condition should be displayed in both Sales order and Billing doc.
And simultaneously, when the billing is created and if user changed 'A' condition master, then new value which is different from sales order have to be reflected in billing doc.
Thank you in advance.

How to make 2 balls move at the same time

I am working on an app in xcode and I need to make 2 balls move at the same time. When I try to use the same code for both of the balls, the 2 CGPoints interfere. Here is my code in the .m file.
@synthesize ball, ball2;
-(void) onTimer {
        ball.center = CGPointMake(ball.center.x+pos.x,ball.center.y+pos.y);
        if(ball.center.x > 295 || ball.center.x < 10)
            pos.x = -pos.x;
        if(ball.center.y > 435 || ball.center.y < 35)
            pos.y = -pos.y;
- (void) onTimer2 {
ball2.center = CGPointMake(ball2.center.x+pos.x,ball2.center.y+pos.y);
if(ball2.center.x > 295 || ball2.center.x < 10)
pos.x = -pos.x;
if(ball2.center.y > 435 || ball2.center.y < 35)
pos.y = -pos.y;
[self collision];
- (void)viewDidLoad
          [[NSTimer scheduledTimerWithTimeInterval:0.04 target:self selector:@selector(onTimer) userInfo:nil repeats:YES] retain];
    [[NSTimer scheduledTimerWithTimeInterval:0.04 target:self selector:@selector(onTimer2) userInfo:nil repeats:YES] retain];
    [super viewDidLoad];
    // Do any additional setup after loading the view from its nib.
Here is my .h file
@interface game : UIViewController {
    IBOutlet UIImageView *ball;
    IBOutlet UIImageView *ball2;
@property(nonatomic,retain) IBOutlet UIImageView *ball;
@property(nonatomic,retain) IBOutlet UIImageView *ball2;

What do you mean by the 2 CGPoints interfere?
You're changing the location of the balls by pos.x and pos.y, where is the code for those? what is it doing?
Why have two timers? One timer would work , just have the code move both balls.
The refresh rate for the screen is 60hz. (60 time a second) You'll get better animation if you stick as close to this value as you can.

How to process very large internal tables and stop time limit

Hello Experts,
I am currently having a problem on how to fix a certain report where we process more than 500 thousand
records in the internal table. I can't think of any solution that can make the below code any faster.
I just checked in our prod server and the error time limit exceeded stops in the loop statement. Anyway,
Below is the code. Any input will be appreciated. Thanks guys and take care!
Get sales document and corresponding line item
SELECT avbeln bposnr a~auart
         avkorg avtweg a~kunnr
         bmatnr bpstyv b~spart
    FROM vbak AS a
   INNER JOIN vbap AS b
      ON avbeln = bvbeln
   APPENDING TABLE lt_vbap
   WHERE a~auart IN lr_auart
     AND a~vbeln IN s_vbeln
     AND a~vbeln IN s_vbill
     AND a~vbtyp EQ p_vbtyp.
LOOP AT lt_vbap ASSIGNING <wa_vbap>.
    IF <wa_vbap>-auart EQ 'ZUCI' OR
       <wa_vbap>-auart EQ 'ZURV' OR
       <wa_vbap>-auart EQ 'ZUPR'.
    Check ifa delivery document has been created
      CLEAR wa_vbill.
      SELECT SINGLE vbeln
        FROM vbfa
        INTO wa_vbill
       WHERE vbelv = <wa_vbap>-vbeln
         AND ( ( vbtyp_n EQ 'J' AND vbtyp_v = 'C' )
          OR ( vbtyp_n EQ 'T' AND vbtyp_v = 'H' ) ).
      IF sy-subrc <> 0.
        <wa_vbap>-del_ind = 'X'.
        CONTINUE.
      ELSE.
      Check if within selection parameters
        CLEAR wa_likp.
        READ TABLE lt_likp INTO wa_likp WITH KEY vbeln = wa_vbill.
        IF sy-subrc <> 0.
          SELECT SINGLE *
            FROM likp
            INTO wa_likp
           WHERE vbeln = wa_vbill.
          APPEND wa_likp TO lt_likp.
        ENDIF.
        IF NOT wa_likp-wadat_ist IN s_erdat.
          <wa_vbap>-del_ind = 'X'.
          CONTINUE.
        ENDIF.
      ENDIF.
    ELSE.
Check if this has already been billed
      CLEAR wa_vbill.
      SELECT SINGLE vbeln
        FROM vbfa
        INTO wa_vbill
       WHERE vbelv = <wa_vbap>-vbeln
         AND ( ( vbtyp_n EQ 'M' AND vbtyp_v = 'C' )
          OR ( vbtyp_n EQ 'O' AND vbtyp_v = 'H' ) ).
      IF sy-subrc <> 0.
        <wa_vbap>-del_ind = 'X'.
        CONTINUE.
      ELSE.
      Check if within selection parameters
        CLEAR wa_vbrk.
        READ TABLE lt_vbrk INTO wa_vbrk WITH KEY vbeln = wa_vbill.
        IF sy-subrc <> 0.
          SELECT SINGLE vbeln fkdat
            FROM vbrk
            INTO wa_vbrk
           WHERE vbeln = wa_vbill.
          APPEND wa_vbrk TO lt_vbrk.
        ENDIF.
        IF NOT wa_vbrk-fkdat IN s_erdat.
          <wa_vbap>-del_ind = 'X'.
          CONTINUE.
        ENDIF.
      ENDIF.
    ENDIF.
Get Material Type and Division
    IF <wa_vbap>-spart IS NOT INITIAL.
      SELECT SINGLE mtart
        FROM mara
        INTO lv_mtart
       WHERE matnr = <wa_vbap>-matnr.
    ELSE.
      SELECT SINGLE mtart spart
        FROM mara
        INTO (lv_mtart,<wa_vbap>-spart)
       WHERE matnr = <wa_vbap>-matnr.
    ENDIF.
If material division is same as parameter division
    IF <wa_vbap>-spart = p_spart.
If material is subsidiary-owned
   IF <wa_vbap>-spart in lr_spart.
    If customer is the same as that of parameter division
      IF <wa_vbap>-kunnr NE lr_kunnr OR <wa_vbap>-auart EQ 'ZUDO' OR <wa_vbap>-auart EQ 'ZUS3'.
      If item is a free good, tag order type as 'ZUPR' to treat
      the item the same way as 'ZUPR'
        IF <wa_vbap>-pstyv = 'TANN' OR
           <wa_vbap>-pstyv = 'ZKNF' OR
           <wa_vbap>-pstyv = 'ZKNN' OR
           <wa_vbap>-pstyv = 'ZFLO' OR
           <wa_vbap>-pstyv = 'ZKBF' OR
           <wa_vbap>-pstyv = 'ZKLN' OR
           <wa_vbap>-pstyv = 'ZREN'.
          lv_auart = <wa_vbap>-auart.
          IF lv_auart EQ 'ZUPR'.
            CLEAR <wa_vbap>-pstyv.
          ENDIF.
          <wa_vbap>-auart = 'ZUPR'.
          CLEAR: lv_mtart.
        ENDIF.
      Set Cost of Goods Sold Account
        <wa_vbap>-cogshkont = '0050000010'.
        CASE <wa_vbap>-auart.
          WHEN 'ZUPR'.
            CASE lv_mtart.
              WHEN 'ZUL4'.
                <wa_vbap>-del_ind = 'X'.
                CONTINUE.
              WHEN OTHERS.
              Check if division is defined in mapping table
                READ TABLE lt_ulsub INTO wa_ulsub
                     WITH KEY spart = <wa_vbap>-spart.
                IF sy-subrc = 0.
                  <wa_vbap>-kostl = wa_ulsub-kostlp.
                  <wa_vbap>-bukrs = wa_ulsub-bukrsp.
                  <wa_vbap>-type = 'TP'.
                Set Cost of Goods Sold Account
                  IF lv_auart = 'ZUPR'.
                    <wa_vbap>-cogshkont = '0050000006'.
                  ENDIF.
                ELSE.
                  <wa_vbap>-del_ind = 'X'.
                  CONTINUE.
                ENDIF.
            ENDCASE.
          WHEN 'ZUCI' OR 'ZUDO' OR 'ZURD' OR 'ZUS3'.
        Get cost center from header text
            PERFORM get_cost_center USING <wa_vbap>-vbeln
                                 CHANGING <wa_vbap>-kostl.
* Change by LGTE 11-02-2006
        Check if Medvale sales
            IF <wa_vbap>-auart EQ 'ZUCI' AND <wa_vbap>-kostl IS INITIAL.
              <wa_vbap>-del_ind = 'X'.
              CONTINUE.
        Check if UL Cost Center
            ELSEIF <wa_vbap>-kostl NE gv_ul_kostl.
           IF <wa_vbap>-kostl NE gv_ul_kostl.
* End change.
          Get material division and check if subsidiary product
             SELECT SINGLE spart FROM mara INTO <wa_vbap>-spart
             WHERE matnr = <wa_vbap>-matnr.
              READ TABLE lt_ulsub INTO wa_ulsub
                   WITH KEY spart = <wa_vbap>-spart.
              IF sy-subrc = 0.
              Get requestor's company code from cost center data
                SELECT SINGLE bukrs
                  FROM csks
                  INTO <wa_vbap>-bukrs
                 WHERE kokrs = lc_kokrs
                   AND kostl = <wa_vbap>-kostl
                   AND datbi GE sy-datum
                   AND datab LE sy-datum.
                IF sy-subrc = 0.
                For donations, only include if a subsidiary company is donating
                  IF <wa_vbap>-auart EQ 'ZUDO' OR <wa_vbap>-auart EQ 'ZUS3'.
                    IF NOT <wa_vbap>-kunnr IN lr_kunnrnt.
                      <wa_vbap>-del_ind = 'X'.
                      CONTINUE.
                    ENDIF.
                   CHECK <wa_vbap>-kunnr IN lr_kunnrnt.
                  ENDIF.
                For ZUCI, if the company code of the costcenter is UL, do not include
                  IF <wa_vbap>-bukrs EQ gc_ul_bukrs.
                    <wa_vbap>-del_ind = 'X'.
                    CONTINUE.
                  ENDIF.
                  IF <wa_vbap>-bukrs = wa_ulsub-bukrsp.
                    <wa_vbap>-type = 'RV'.
                  ELSE.
                    <wa_vbap>-type = 'RV'.
                  ENDIF.
                ELSE.
                Check if customer defined in table ZFI_DONATIONS
                  SELECT SINGLE kunnr FROM zfi_donations INTO <wa_vbap>-kostl
                    WHERE kunnr = <wa_vbap>-kostl.
                  IF sy-subrc <> 0.
                    lv_error = 'X'.
                    CONCATENATE 'Cost center/Customer' <wa_vbap>-kostl
                                'does not exist. Please check Sales Order'
                                <wa_vbap>-vbeln
                                INTO lt_disp-message SEPARATED BY space.
                    lt_disp-type = 'E'.
                    <wa_vbap>-del_ind = 'X'.
                    APPEND lt_disp.
                    CONTINUE.
                  ELSE.
                    <wa_vbap>-type = 'RV'.
                  ENDIF.
                ENDIF.
              ELSE.
                <wa_vbap>-del_ind = 'X'.
                CONTINUE.
              ENDIF.
            ELSE.
              <wa_vbap>-del_ind = 'X'.
              CONTINUE.
            ENDIF.
          WHEN OTHERS.
            <wa_vbap>-del_ind = 'X'.
            CONTINUE.
        ENDCASE.
      ELSE.
        <wa_vbap>-del_ind = 'X'.
        CONTINUE.
      ENDIF.
    ELSE.
      <wa_vbap>-del_ind = 'X'.
      CONTINUE.
    ENDIF.
Get company code description
    SELECT SINGLE butxt FROM t001 INTO <wa_vbap>-butxt
     WHERE bukrs = <wa_vbap>-bukrs.
    IF sy-subrc <> 0.
      SELECT SINGLE name1 FROM kna1 INTO <wa_vbap>-butxt
       WHERE kunnr = <wa_vbap>-kostl.
    ENDIF.
Change by LGTE on 11-02-2006
Get Transaction Type
    CASE <wa_vbap>-auart.
      WHEN 'ZUPR'. "UL Promo/Samples
        IF <wa_vbap>-pstyv = 'TANN' OR
           <wa_vbap>-pstyv = 'ZKNF' OR
           <wa_vbap>-pstyv = 'ZKNN' OR
           <wa_vbap>-pstyv = 'ZFLO' OR
           <wa_vbap>-pstyv = 'ZKBF' OR
           <wa_vbap>-pstyv = 'ZKLN' OR
           <wa_vbap>-pstyv = 'ZREN'.
          <wa_vbap>-ltext = 'Free Goods'.
        ELSE.
          <wa_vbap>-ltext = 'Product Samples'.
        ENDIF.
      WHEN 'ZUDO'. "Donations - R/3
        <wa_vbap>-ltext = 'Donations - R/3'.
      WHEN 'ZUCI'. "Donations - ZUCI
        <wa_vbap>-ltext = 'Donations - ZUCI'.
      WHEN 'ZURD' OR 'ZUS3'. "UL Returns - Donation
        <wa_vbap>-ltext = 'UL Returns - Donation'.
    ENDCASE.
Get material description
    SELECT SINGLE maktx
      FROM makt
      INTO <wa_vbap>-maktx
     WHERE matnr = <wa_vbap>-matnr
       AND spras = sy-langu.
Get division from material master
   SELECT SINGLE spart FROM mara INTO <wa_vbap>-spart
    WHERE matnr = <wa_vbap>-matnr.
Get division description
    SELECT SINGLE vtext
      FROM tspat
      INTO <wa_vbap>-vtext
     WHERE spras = sy-langu
       AND spart = <wa_vbap>-spart.
Get Valuation Class
    SELECT SINGLE bklas
      FROM mbew
      INTO lv_bklas
     WHERE matnr = <wa_vbap>-matnr.
Determine G/L of FG Based on Valuation Class
    READ TABLE lt_val_cls INTO wa_val_cls WITH TABLE KEY bklas = lv_bklas.
    <wa_vbap>-fghkont = wa_val_cls-hkont.
Determine Cost Center of Cogs Account
    READ TABLE lt_ulsub INTO wa_ulsub WITH TABLE KEY spart = <wa_vbap>-spart.
    <wa_vbap>-cogskostl = wa_ulsub-kostlp.

Hi!
First of all, don't use SELECT SINGLE inside of LOOP,
instead SELECT all relevated rows before LOOP in intertal tables (using FOR ALL ENTRIES) and then use
READ TABLE WITH KEY BINARY SEARCH.
it will match faster.
for example:
IF NOT lt_vbap[] IS INITIAL.
SELECT vbeln
FROM vbfa
INTO lt_vbill
FOR ALL ENTRIES IN lt_vbap
WHERE vbelv = lt_vbap-vbeln.
ENDIF.
SORT lt_vbap BY vbeln.
READ TABLE lt_vbill WITH KEY vbeln = <wa_vbap>-vbeln
BINARY SEARCH.

Session Idle time and public web pages access

Hi
The idle timeout can happen when authenticated user requests only public web pages on the site (pages in notenforced_list) . Following request to the protected pages is possible only throw the annoying login page.
I need to configure AM to track access to the public web pages for authenticated users. And so, idle timeout will only possible, if authenticated user actually not sends any requests to the site.
Please give me an ideas, how it is possible.
Only one bad solution i know:
To put hidden image to the all public site pages, which is protected by policy agent. Every request to the public pages will be enforced by policy agent (throw request to the hidden image). And there is no idle timeout when authenticated user actually still active on the site.
Roman.
PS: AM 7.1 update 1 on Sun App Server 8.2. Web site on the Sun Web Server 7

We are find a trouble.
The answer is for history:
The idle timeout can happen when authenticated user requests only public web pages on the site (pages in notenforced_list)The idle time can happend only if Policy Agent has no mapping (profile or session) attributes to the HEAD or COOKIE to the HTTP request. If at leats one attribute (profile or session) is mapped, then all work propertly. There is no Access Manager Session Idle timeout in this case.

Apache Web Agent can't reset the session idle time value, pls help.

Hi, all
I'm using Apache Web Agent to protect an application, when I enter the application and do some actions in the application, I find my session's idle time value in the AM console can't be reset to zero, and after the idle time, the session will be time out.
And the session's idle time can be reset to zero when I enter another application that protected by IIS Agent, or when I operate on AM console directly.
My environment:
Apache 1.3.33
Web Agent 2.2
RedHat Linux AS 3
Access Manager 7.0 Patch9
I have found a page with google, but have no answer:
http://forums.sun.com/thread.jspa?threadID=5402511
Please help.
Thanks in advance!
Shen

Thanks for the reply, Shivaram. The issue appears to occur at random time, not accurately at the 3 min interval as you mention. I tested changing this value to 1, theoretically, after one 1 minute of idle time, accessing a link would make the agent reset the time idle value for the user session in SAM, but it didn't even after 3 minutes. This seems to be either a policy agent or system access manager bug.
We performed a 'vanilla' test using the apache server manual pages (only plain HTML, no POST requests), the pages are protected by the policy agent. At the first login, rwe were prompted to enter credential to be validated by SAM/LDAP, and then a user session is created in SAM session table. We browse around the manual pages, once in a while, certain pages cause the policy agent to reset the time idle. However, revisiting these links after a few minutes doesn't reset the idle value. Caching setting has been disable as well. Could there be or lack of some settings in AMConfig.properties or AMAgent.properties that might have caused this behavior?
Thanks for all your help,

Customize Session Idle Time

I need to set Page Idle Time out to 1hr i.e. 3600 sec. so that session gets expire and user gets logout after 3600 sec. if the user remains idle.
Please help me in finding out from where can I set this value ?

Hi,
You can set this in WebGate profile. By default the idle session timeout value in WebGate is 3600 seconds. If you are using custom application with Oracle Access Manager for SSO and if you are configuring idle timeout in your application, then you need to modify it accordingly.
HTH.
-Mahendra.

How to make a Exception class in java ?

I want to make a class called SomeException. I want to throw this exception from my class Myclass. How to do it ??

Just let SomeException extend Exception (or RuntimeException) and throw it the same way you'd throw any other exception. There's no magic involved.

How to make an audio Multi-Unicasts session with JMF&RTP?

Hi,
I am developing an application that could make an audio communications between diffrents users without conferencing or broadcasting.
I have tried to make many separatly unicasts but the application crash.
Can someone help me with a sample of source code in multi-Unicast session? It's very urgent.
Thanks in advance.
Badr.

Hi,
look at this: http://forum.java.sun.com/thread.jspa?threadID=5158056&tstart=0.
My server is a multi-unicast application. Conferencing is here only a kind of administration.
Best,
Andreas

How to make everything except the finder disappear?

I'd like to press one key on my keyboard and have everything but the finder get hidden. Any way to do that?

Hi there,
Not exactly 'one key' as requested, but if you hold the Cmd and Option keys and click on an application window, it will hide everything except that application. You can exploit this behaviour for your needs by cmdoptclicking on any part of your Desktop. This will hide everything except the Finder.
Yang

Urgent: How to make transaction iVews check the connetion all time

Hi!
We have an EP7 connected to an ECC6.
We find out the EP7's transaction iViews can communicate with the ECC6
even the connection between them is cut off after the user logged into EP7.
So seems EP7 session remembers the connection.
We do not want this feature.
Please advise how to do? Points guaranteed. Thanks!

Check these two properties for your Transaction iView
"Allow Client-Side Caching" set it to NO
"Cache Level" set as None
see if the connectivity is still held intact if connection broken.
Regards,
Shubhadip

How to make a smart album from a particular time zone?

I would like to make a smart album that contains photos taken in a particular time zone. But I could not find out the way to add a rule to read time zone information. Could anyone tell me how to retrieve the time zone information from the filter panel of Aperture 3?

to add a rule to read time zone information.
I could not find any metadata tag in aperture, that contains the Time Zone and is readable in the smart settings HUD.
Yu could try it indirectly - since the Time Zone is widely determined by the longitudes of the eastern and western boundaries of the zone, you could check for these longitude values, if your photos are geotagged or have Places assigned.
For example, to find the timezone of UTC+1 use these settings:
EXIF > Longitude is in the Range of: 7.7 to 22.5.
Depending on the countries, you may need to combine this rule with latitude rules as well or make a rule that simply uses the country names from the places tags.
For which timezone do you need the rule?
http://www.timeanddate.com/time/map/

How to make only one JFrame active at a time !!!

Hy, I have created a JFrame and I have placed a
JPanel in it. I also have a JButton "New" on the
JPanel. When I click on the "New" Button, another JFrame
appears. But I want ONLY one JFrame to be appeared
at a time. That is when a JFrame appears on the JPanel,
I should not be able to add another one.
If it is not possible to do this with JFrame, then how to do
it with a JDialog
How to do this.
thanks

You can declare a boolean variable in your class and set it to true if you open a window. Next time when you click the NEW button, check whether that boolean value is true or false. If true then don't open a new window. Also when u close the frame window, set the boolean value to false.

How to make an exception to RDS session Idle Time Limit?

Similar Messages

Maybe you are looking for