How to make BAPI_PO_CREATE1 not to get net price in inforecord, etc...

Hello Experts,
If we dont pass any values in the net price, this BAPI gets the default price in the inforecord.
Now, we do now want this. Instead, what we want is to not create the PO entirely. Is there a way
to prevent BAPI_PO_CREATE1 to NOT get net price from inforecord?

Hello
Try to set the IMPORT paramter NO_PRICE_FROM_PO = 'X'.

Similar Messages

  • How to make JScrollpane not to fetch data while scrollbar is adjusting?

    how to make JScrollpane not to fetch data while scrollbar is adjusting?
    Hi,
    I need to make the jscrollpane get data only when the scrollbar stops scrolling.
    for instance if I hold the scrollbar's thumb and drag it to pass 1000 records, I want the view to wait until I release the thumb before taking any action( ex. adjust the view). in other words if the value of getValueIsAdjusting() of scrollbar is true, then the jscrollpsne should wait until it changes to false before doing anything. this is the same approach that Outlook takes when browsing through the list of emails in your mailbox.
    I don't know how to solve this issue. any help regarding this issue would be appreciated.
    thanks
    Saba

    You are planning to mention your cross-post(s) somewhere in this post, correct?

  • How to make Finder NOT to show files from a specific folder in "All My Files"?

    Hello!
    Can someone please advice how to make finder NOT to show files from a specific folder in "All My Files"? See the attach - I recently installed Civilization 5 from Steam and now I have a lot of unneeded files (*.log and *.ini) shown in  All My Files colder in Finder.
    I don't want to see them. Any advise?

    Using "All my Files" was very handy before all this rubbish popped up. =(

  • How to make labview program to get average value of 200 reading from multimeter (by using loop)

    Hello
    How to make labview program to get average value of 200 reading from multimeter (I using using loop) to read voltage from mulmeter  but I like to get average value of all of 200 reding how can I do that?
    Thanks
    Wee
    Solved!
    Go to Solution.

    Another idea with less programming - take advantage of the "free" array that comes with a Chart - i.e. the  History Data.
    1) Wire your DMM data to a Chart. (You can set the chart to invisible if you don't plan on using it in the GUI).
    2) Set the Chart History Length to 200 (right click on the chart, click on Chart History Length...)
    3) On the block diagram, use the History Data Property Node, wire it to Mean.vi, and you're done.
    Easiest running average ever.
    Message Edited by Broken Arrow on 04-07-2010 11:36 AM
    Richard
    Attachments:
    EasyAvg.jpg ‏8 KB

  • PO tax value is not added in net price

    Hi
    In PO tax value is not added in Net price .
    In the pricing elements it is showing the total value .
    But in the field of net value , it is not calculating the net value and so it is showing in the PO print out.
    Kindly advise.
    regards,

    Hi Sandeep,
    In case u want to print the net value with the tax u have to make the value as print relevant in the pricing procedure .
    And also u need to store this value in the field from  where the net price is printed and again this can be done in the pricing procedure.
    Hope this will help you .
    Please reward points for useful answer.
    Regards
    Mani

  • I need to back up and sync multiple iPhones to a single iMac.  Each iPhone has a separate Apple ID and the data from each iPhone needs to be backed up separately from the others.  How can I do this without getting all of the contacts, etc. mixed? Tnx

    I need to back up and sync multiple iPhones to a single iMac.  Each iPhone has a separate Apple ID and the data from each iPhone needs to be backed up separately from the others.  How can I do this without getting all of the contacts, etc. mixed? Tnx

    This might help: http://support.apple.com/kb/HT1495.

  • Net price in Inforecord

    I am trying to change the net price in inforecord. Currently it says 0.00 usd. The condition PB00 is maintained. 
    Even if i change the value to 300usd in PB00, still my net price field says 0 in inforecord.
    Why is the net price not changing, even after i change the PB00 condition type in info record? Any suggestions.
    Sylvia

    see explanation in OSS note 685117 - Net Price in Info Record or Contract is wrong
    and 392988 - Consulting: Prices in info record and RM06INP0
    you have to run report RM06INP0 for Info Records

  • Does anyone know how to make an appoitment on the net?  My iphone has died and I need to take it in tomorrow but don't know how to book in???

    Does anyone know how to make an appointment with a genius on the net please?   Also is there a chat room that can be accessed on the net?   My iphone has died and I desperately need to take it in to get fixed/replaced.   I can't find anything..............help!!!

    Apple Retail Store - Genius Bar
    What kind of chat room?
    Have you tried basics from the manual?  restart, reset, restore

  • JDev902: How to make it NOT start up a web browser on debug start?

    In my JDeveloper setup, when I click on the bug to start my application, it starts up the embedded OC4J and eventually finishes initializing it. I then go to my already running web browser and request the application URL. This works fine.
    My colleagues, however, get slightly different behavior when they click on the bug, at some point during that process it actually starts up another instance of a web browser and tries to go to a particular web page. We all find that very annoying and would like to turn it off. Fortunately for me, it doesn't do that to me. What do they have to do in their environments to make that NOT happen? We don't want it to start another web browser instance when we debug the application.

    You'd think if the field was blank, it wouldn't do this at all.
    I looked at my configuration, and the field is blank.
    I went to my coworker's system, whose field was also blank, and who is getting this annoying behavior, so we changed the field to "aaaa". This works. It doesn't bring up the browser window. It does, however, still print out a line in the messages window, like this:
    Target URL -- http://<ipaddress>:8992/felix/index.jsp
    I do NOT see this message.
    So this workaround helps, as it avoids the annoying symptom, but I still wonder WHY I never had this problem, and why I don't see that "Target URL" message, which seems to be related. Both of us have the "Default run target" in our projects set to the same JSP page.

  • How to get net price of a given material(Just like in VA01)

    Hello Experts,
    How do I get the net price of a given material? Just like when entering a
    material in VA01(sales order creation). Hope you can help me guys.
    Thank you and take care!

    This is a million dollar question.
    It depends on how the pricing have been configured in your system and only your SD consultant can answer it correctly. Price in VA01 could be determined by using the pricing conditions or, if allowed, a manual user entry (i.e. when users just type in the price). Discounts, taxes, etc. are calculated in a similar way, also based on the configuration.
    Pricing conditions are displayed in transaction VK13. You might want to take a look at an order in VA03 -> double-click on a line and go to Conditions tab. There are buttons Analysis and Condition Rec. that might be useful for your research. It is possible to configure different price for the same material and different customer, distribution channel, etc., so you will have to ask your SD consultant how to get the correct number in each case.
    Just FYI the net price on the order/contract is in VBAP-NETWR and condition are stored in the tables Annn, e.g. A901, etc. The tables are generated according to the configuration and are different in each system.

  • ICC file associated with photoshop process on Windows, how to make them not associated?

    In my code, an ICC profile is created and copy to the system folder (C:\Windows\System32\spool\drivers\color)
    then assign this profile to current document in photoshop using sPSActionControl->Play(&result, StringToKey("assignProfile"), iDescriptor, mode); // iDescriptor contains the ICC profile name
    after assigning profile, the .icc file is associated with the ps process, that is, I can't delete it or rename it, nor can I replace it with another file having the same name. But on Mac, the ICC file won't be associated with the process, so I can overwrite the icc file and do other work, that's better.
    How to make the icc file not taken by photoshop after assigning profile on windows?

    what i finally did to go around this problem was to make another user on my computer and only download podcasts. just as long as you don't hook the ipod up in this new profile, you should be fine

  • How to make a functions that gets called when the plug in is loaded?

    I'm making an automate plugin, and I want to make a functiosn that gets called when Photoshop loads my plugin. It doen't matter if my plug is never called fro the File->Automate menu. Is there any way to do this? Thank you.
    Daniel

    Hi There,
    I don't believe there is a way to handle this currently within App-V...Other virtualization products do have the ability to exclude processes and force to run outside or the bubble or exclude them from terminating on shutdown.
    It would be a great feature request for a future release. You can easily request it here:
    http://appv.uservoice.com/forums/280448-microsoft-application-virtualization
    PLEASE MARK ANY ANSWERS TO HELP OTHERS Blog:
    rorymon.com Twitter: @Rorymon

  • Get net price like simulating sales order

    Hi Gurus!
    I need to get the net price for a bunch of material as I'm creating a sales order.
    I tryed the BAPI_SALESORDER_SIMULATE but this is NOT an option because simulating sales order is too slow (a lot of custom control in User exit and so on..).
    There is a way (BAPI / FM) to get only the net price for a material?
    Thanks!

    I would have to agree that the simulate call is indeed slow....after all, it's doing everything except the commit work (DB update)... and if you have configureable materials (variants)...that really seemed to add to the time for me.  In my case, I had one situation where I used the simulate  for pricing the material variants, and when it was not a configurable material, I worked out the logic for which condition tables to read, since that probably takes only a tiny fraction of the time that simulate would require.  
    Just a suggestion... I understand that, in some situations, obtaining the figuring out which table to read in which situations and getting 100% accurate results is a bit of a challenge.

  • Rounding off Issue (Net Value not equal to Net Price * quantity)

    Dear Gurus,
    Here is an interesting issue.The default calculation done in the pricing procedure is two decimal places.Now we consider a real scneario,consider the net value of 324 quantities of an item calculated is 36,049.86 .When it is divided by quantity  the resulting value of net price is 111.265 but the system shows 111.27 by rounding it off.
    Now here comes the problem,my client needs the rate to be shown on the order script to be two decimal places and the net value should be equal  quantity * net price.So if we apply this,
    324 * 111.27 = 36051.48
    But the net value calculated by the system is 36,049.86.So it can be consluded that:
    "Quantity * Net Price Shown is not Equal to Net Value calculated by the System"
    Need an urgent resolution,project is stuck on this
    Regards,
    Sam Ahmed
    Edited by: Lakshmipathi on Nov 3, 2011 12:14 PM
    Please dont add URGENT in subject or in your post

    Here is the pricing procedure,
    We start with the amount condition types
                                            Unit Price        Units Condition Value
    ZMRP     MRP                     1,700.00           10     PAC     55,080.00      
    ZTRP     Trade Price     1,445.00           10     PAC     46,818.00      
    ZDPR     Dist. Price     1,445.00           10     PAC     46,818.00         (GL)
    Using Trade Price we apply the product discount of 23%
    ZPRD     Product Discount     23.000-     %                    10,768.14-
    Then we send discount amount to the gl by using condition type ZDIS
    ZDIS      Discount Value     100.000-     %           10,768.14-      (GL)
    tHE RESULTING NET VALUE IS  36,049.86      as 46818.00 - 10,768.14
         Order Item value     111.27      1     PAC     36,049.86      
    And the Net Price is 111.27

  • Getting Net Price excluding Excise in Purchase Order

    Dear Gurus,
    After preparing purchase order, I need to get Net of Modvat price i.e. Base Price + Tax (Excluding Excise Amount).
    Please guide me where I will get this details, based on which a report to be designed.  In PO conditions tab it is showing Base + Taxes (Including Excise Amount).
    If you can tell tcodes or tables where this value is available or any customization will solve this problem.

    Hi,
    If you want Base Price + CST then add condition type NAVS in your pricing procedure, mark is statistical and Reqt 60. This will bring CST Value in this condition type from Taxes.
    And then create a Subtotal as (Base Price + CST) and pass it to Subtotal 2 (KOMP-KZWI2).
    After saving PO, you will get this value (Base Price + CST) in Table EKPO-KZWI2.

Maybe you are looking for