How to get net price of a given material(Just like in VA01)

Hello Experts,
How do I get the net price of a given material? Just like when entering a
material in VA01(sales order creation). Hope you can help me guys.
Thank you and take care!

This is a million dollar question.
It depends on how the pricing have been configured in your system and only your SD consultant can answer it correctly. Price in VA01 could be determined by using the pricing conditions or, if allowed, a manual user entry (i.e. when users just type in the price). Discounts, taxes, etc. are calculated in a similar way, also based on the configuration.
Pricing conditions are displayed in transaction VK13. You might want to take a look at an order in VA03 -> double-click on a line and go to Conditions tab. There are buttons Analysis and Condition Rec. that might be useful for your research. It is possible to configure different price for the same material and different customer, distribution channel, etc., so you will have to ask your SD consultant how to get the correct number in each case.
Just FYI the net price on the order/contract is in VBAP-NETWR and condition are stored in the tables Annn, e.g. A901, etc. The tables are generated according to the configuration and are different in each system.

Similar Messages

Info needed on how to get list price for a given MATNR and pricing Conditio

Hi All,
Can some one help me in finding List price for a given MATNR and pricing condition type.
Basically, i need info regarding the tables that i need to use for this purpose.
Thanks in advance.
Regards,
Udaya.
PS: All helpful answers will be rewarded.

Hi Udaya,
A simple solution to all these kind of problems:
Goto Transation SE16
Table :TSTC
in Tcode :Give A* or V* or anything...and find the relevant transctions and data.
if found useful...reward points.
Regards,
Nisha

Info needed on how to get list price for a given MATNR and pricing Conditi

Hi All,
Can some one help me in finding List price for a given MATNR and pricing condition type.
Basically, i need info regarding the tables that i need to use for this purpose.
Thanks in advance.
Regards,
Udaya.
PS: All helpful answers will be rewarded.

Hi,
I moved your topic to this forum
Mario

How to make BAPI_PO_CREATE1 not to get net price in inforecord, etc...

Hello Experts,
If we dont pass any values in the net price, this BAPI gets the default price in the inforecord.
Now, we do now want this. Instead, what we want is to not create the PO entirely. Is there a way
to prevent BAPI_PO_CREATE1 to NOT get net price from inforecord?

Hello
Try to set the IMPORT paramter NO_PRICE_FROM_PO = 'X'.

How to populate net price on delivery

Hi All
We are running closed order reports on sales overview cube with the selection on Actual goods issue date. But we are not getting Net price and ordered quantity in the report. The reason is Net price is coming from sales order but when we extract using Actual goods issue date data is populating from delivery line only.
Anyone have idea on this how to extract delivered orders with netprice and also we need ordered quantity.
Thanks
Vani

There might be more than one method to resolve the requirement.
You can develop a routine in t.code VOFM and add it in the column AltCTy. The logic in the routine can be if the netvalue exceeds 2500, then the net value should be 2500.
The second option is you can try with using standard. In VK12, after maintaining the pricing as 100/day, go to details. Then in upper limit add value as 2500. Then create a test sales order for 25 days and more than 25 days, then check the values. I think this can help with your scenario.
Regards,

Qry:How to get different price for each price list (variable area) in order

1-How to get different price for each price list (variable area) in order for sale. for the opportunity to display and select multiple prices.
2- I add a location store from a table in line item and I want to see this area in order,.
I 'm created 2 field location(item line and order), 1 table location
I tried this for exemple : select $ [userfieldlocation.OITW]

Thanks Suda for your answer,
the Formatted Search for prices is OK, but for the Item locations in warehouse this is not so simple,
I must have several (at least 2) locations for the item in the Warehouse and a track of this location and search possibilities.
read carefully and imagine how (Management warehouse locations)
I added a user table '@Location' who linked to a user field 'U_Location in Item master data --> lnventory data line and an ather user field 'U_Location' in sales order
I met the value of location in the table (list of locations for any warehouse), I select the location of each item while receiving merchandise in the user field of inventory data line (Item M data) and this value appears in the sales order 'U_Location' user field ( only the location value in the default warehouse for this Item)
or
create an user field 'location' in Good receipt PO to fill it while receiving merchandise that appears in the sales order to give possibility to find/select the location of the item at this order and in Item master data
I think we will use all these tables
@LOCATION
PDN1
OITM
OITW
OWHS
RDR1
Juste a another question : where you found this and What is: ' 38.1.0 '
Is it in document (System information):Item=38 Pane=1 ??
Thanks,
Ouchen

How to get number of digits in given amount

Hi Experts,
How to get number of digits in given amount.
Regards
Mohit

Check this :
data: v_data1 type p decimals 3 value '12.860',
      v_char1 type char20,
      v_char2 type char20,
      v_char3 type char20,
      len type i.
write v_data1 to v_char1.
split v_char1 at '.' into v_char2 v_char3.
len = strlen( v_char3 ).
write:/ v_char2,
      / v_char3, " this holds the digit value
      / len.     " number digits

How to get a opening stock of a material on a particular date

Hi,
Could you pls provide me the logic of how to get the opening stock of the material on a particular date. I searched the forum and found the logic to fetch the closing stock at a given period but not for a date.
An immediate response would be really appreciated.
Thanks
Harris

Dear,
Please read following part of my code
FORM GET_OPENING .
   IF IT_FINAL[] IS NOT INITIAL.
     SELECT * FROM MARD
       INTO CORRESPONDING FIELDS OF TABLE IT_MARD
       FOR ALL ENTRIES IN IT_FINAL
       WHERE MATNR = IT_FINAL-MATNR
       AND   WERKS = '1000'.
     SELECT A~MBLNR A~MJAHR A~BUDAT B~WAERS B~ZEILE B~BWART B~MATNR B~WERKS B~LGORT B~CHARG B~SHKZG B~MENGE B~MEINS B~BUSTM B~XAUTO
       INTO CORRESPONDING FIELDS OF TABLE IT_MKPF
       FROM MKPF AS A JOIN MSEG AS B
       ON A~MANDT = B~MANDT
       AND A~MBLNR = B~MBLNR
       AND A~MJAHR = B~MJAHR
       FOR ALL ENTRIES IN IT_FINAL
       WHERE B~MATNR = IT_FINAL-MATNR
       AND   A~BUDAT GE P_BUDAT-LOW
       AND   B~WERKS = '1000'.
   ENDIF.
   AKTDAT = SY-DATLO + 30.
   IF NOT ( P_BUDAT-HIGH IS INITIAL OR P_BUDAT-HIGH > AKTDAT ).
     LOOP AT IT_MKPF INTO WA_MKPF WHERE BUDAT > P_BUDAT-HIGH.
       MOVE-CORRESPONDING WA_MKPF TO IT_MKPF1.
       APPEND IT_MKPF1.
       DELETE IT_MKPF.
     ENDLOOP.
   ENDIF.
   SORT IT_MKPF1 BY WERKS MATNR SHKZG.
   LOOP AT IT_MKPF1.
     IF ( IT_MKPF1-XAUTO IS INITIAL ) OR
         ( IT_MKPF1-BUSTM <> 'MA02' AND IT_MKPF1-BUSTM <> 'MA05' ) .
       MOVE-CORRESPONDING IT_MKPF1 TO IT_MAT.
       COLLECT IT_MAT.
     ELSE.
       DELETE IT_MKPF1.
     ENDIF.
   ENDLOOP.
   SORT IT_MKPF BY WERKS MATNR SHKZG DESCENDING.
   LOOP AT IT_MKPF INTO WA_MKPF.
     IF ( WA_MKPF-XAUTO IS INITIAL ) OR
        ( WA_MKPF-BUSTM <> 'MA02' AND
        WA_MKPF-BUSTM <> 'MA05' ).
       MOVE-CORRESPONDING WA_MKPF TO T_MAT.
       COLLECT T_MAT.
     ELSE.
       DELETE IT_MKPF.
     ENDIF.
   ENDLOOP.
   LOOP AT IT_MARD.
     CLEAR IT_MAT-MENGE.
     MOVE-CORRESPONDING IT_MARD TO FINAL.
     READ TABLE IT_MAT WITH KEY WERKS = IT_MARD-WERKS
                                LGORT = IT_MARD-LGORT
                                MATNR = IT_MARD-MATNR
                                SHKZG = 'S'.
     FINAL-ENDMENGE = IT_MARD-LABST + IT_MARD-INSME + IT_MARD-SPEME + IT_MARD-EINME + IT_MARD-RETME - IT_MAT-MENGE.
     CLEAR IT_MAT-MENGE.
     READ TABLE IT_MAT WITH KEY WERKS = IT_MARD-WERKS
                                LGORT = IT_MARD-LGORT
                                MATNR = IT_MARD-MATNR
                                SHKZG = 'H'.
     FINAL-ENDMENGE = FINAL-ENDMENGE + IT_MAT-MENGE.
     COLLECT FINAL.
   ENDLOOP.
   LOOP AT FINAL.
     CLEAR T_MAT-MENGE.
     READ TABLE T_MAT WITH KEY WERKS = FINAL-WERKS
                                MATNR = FINAL-MATNR
                                SHKZG = 'S'.
     MOVE T_MAT-MENGE TO FINAL-SOLL.
     CLEAR T_MAT-MENGE.
     READ TABLE T_MAT WITH KEY WERKS = FINAL-WERKS
                                MATNR = FINAL-MATNR
                                SHKZG = 'H'.
     MOVE T_MAT-MENGE TO FINAL-HABEN.
     FINAL-ANFMENGE = FINAL-ENDMENGE - FINAL-SOLL + FINAL-HABEN.
     MODIFY FINAL.
   ENDLOOP.
   LOOP AT FINAL.
     WA_FINAL1-MATNR = FINAL-MATNR.
     WA_FINAL1-MEINS = FINAL-MEINS.
     WA_FINAL1-OP_MENGE = FINAL-ANFMENGE.
     WA_FINAL1-RE_MENGE = FINAL-SOLL.
     WA_FINAL1-IS_MENGE = FINAL-HABEN.
     WA_FINAL1-CL_MENGE = FINAL-ENDMENGE.
* WA_FINAL-LGORT = FINAL-LGORT.
*    READ TABLE IT_MAKT WITH KEY MATNR = FINAL-MATNR.
*    MOVE IT_MAKT-MAKTX TO WA_FINAL-MAKTX.
     APPEND WA_FINAL1 TO IT_FINAL1.
   ENDLOOP.
ENDFORM.                    " GET_OPENING

How to create a Platinum,Gold and Silver Customer and how to set different price for a single material based on customer?

Hi All,
How to create a Platinum,Gold and Silver Customer and how to set different price for a single material based on customer?
Assume Material is Pen.
While creating Sales Order in VA01 how to bring different price for the same material for Platinum,Gold and Silver Customers.
Kindly help me out.
Thanks,
Renjith Jose

A good place to start is http://www.javaworld.com/javaworld/javatips/jw-javatip34.html
Also, do a search in this forum on HttpURLConnection. That class allows you to use POST method to send form data to a web server.
"Hidden" variables are only hidden in HTML. The HTTP that gets POSTed to the web server doesn't distinguish between hidden and not hidden. That is, the content you would write to the HttpURLConnection.getOutputStream() would be something like:
hidden=1&submit=ok(Of course, the variable names would depend on what the web server was expecting from the form.)
Also, be sure to set the Content-Type request parameter to "application/x-www-form-urlencoded"

Function Module for calculation of the net price of a configurable material

Hi,
I would like to know if a function module allows to calculate the purchasing /net price of a configurable material at a vendor and at a requested delivery date before the creation of a purchasing order.
For configurable materials, we have no PIR and no moving / standard price thus the valuation price in the PR is blank.
I would like to fill in the field "valuation price" in the PR with the net price we can find in the PO.
However the PR is created before the PO.
Thanks a lot in advance for yours reply.
regards,

hi Pravenn,
I don't know about these functions, but u can try anything like this:
data:
strdate like sy-datum value '20070901',
      enddate like sy-datum value '20070909',
      date(10),
      moddate(1).
date = enddate - strdate + 1.
moddate = date mod 7.
date = date div 7.
if moddate <> 0.
date = date + 1.
endif.
write: / date.
Regards
Allan Cristian
Message was edited by:
        Allan Cristian

How to get slow motion with 720/60p material in Premiere Pro CS5.5

Hi everyone,
I'm trying to learn how to get a slow-motion effect with material that has been shot in 60p (59.94fps).
I imported that material (AVCHD-codec) into Premiere Pro CS 5.5 and created a new sequence with 25 fps. Still, the material is in normal speed in playback. no slow motion...
Can anyone tell me whether I missed out on something really simple :-) ? Or is the whole thing more complicated than I thought?
Any help welcome,
thanks!
Toni

Ok, it's weird to answer my own post, yet I learned how to do it and in case someone else is just starting up, it might be helpful:
import the 60p footage into premiere, rightclick onto it in your footage-list and got to modify > interpret footage. there you can enter your desired framerate (in my case 25fps) and click "ok". then right click on the footage again and choose "new sequence from clip" and now you have a 25fps-sequence with true slow motion footage.
thanks to Adobe ambassador Jon Barrie!

How to get list of active users with the details like samaccountname, name, department, job tittle, email in active directoy?

how to get list of active users with the details like samaccountname, name, department, job tittle, email in active directoy?

You can use third party software True Last Logon 2.9.You can export the file in excel for report creation.You can use the trial version this will achieve what you are looking for.
True Last Logon displays the following Active Directory information:
--Users real name and logon name
--Detailed account status
--Last Logon Date & Time
--Last Logon Timestamp (Replicated value)
--Account Expiry Date & Time
--Enabled or Disabled Account
--Locked Accounts
--Password Expires
--Password Last Set Date & Time
--Logon Count
--Bad Password Count
--Expiry Date
--You can also query for any other attribute (Example: Description, telephone Number, custom attibutes etc)
Refer the below link for trial version:
http://www.dovestones.com/products/True_Last_Logon.asp
Best Regards,
Sandesh Dubey.
MCSE|MCSA:Messaging|MCTS|MCITP:Enterprise Adminitrator |
My Blog
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Getting Net Price excluding Excise in Purchase Order

Dear Gurus,
After preparing purchase order, I need to get Net of Modvat price i.e. Base Price + Tax (Excluding Excise Amount).
Please guide me where I will get this details, based on which a report to be designed. In PO conditions tab it is showing Base + Taxes (Including Excise Amount).
If you can tell tcodes or tables where this value is available or any customization will solve this problem.

Hi,
If you want Base Price + CST then add condition type NAVS in your pricing procedure, mark is statistical and Reqt 60. This will bring CST Value in this condition type from Taxes.
And then create a Subtotal as (Base Price + CST) and pass it to Subtotal 2 (KOMP-KZWI2).
After saving PO, you will get this value (Base Price + CST) in Table EKPO-KZWI2.

How to make net price field in Purchase Order Uneditable

Hello all,
I am facing a problem. During creation of purchase orders the material price is picked up from the Info Record, but the net price field is editable. Please guide me how through standard SAP can i make this net price field uneditable.
Thanks in Advance,
Ritesh.

Hi Ritesh,
You can goto:
SPRO-MM-Purchasing-Purchase Order-Define Screen Layout at Document Level
from here you select ME21N-Selection group-Quantity and Price.
Make the price and price unit as DISPLAY.
By this it will show only display for price, but you have to take not that there is also condition tab which user can change the price, this price is from INFOREC.
Goto to M/06 select your Condition type, In Manual entries maintain "D"-Not possible to process manually
Regards,
Maia

How to change net Price by using BAPI_PO_change

Hi experts..
How i can change net price by using bapi_po_change.
What parameters i have to pass in this fm.
if possible please tell me , which table this FM will update.
Thanks.
I will award points for all help.

See the below code and have tested and it works great..
REPORT ZTEST_PG_07 NO STANDARD PAGE HEADING
                    MESSAGE-ID z9_msg_prash.
Tables Declaration ****
TABLES: ekpo.
Variables Declaration ****
DATA: v_purchaseorder TYPE bapimepoheader-po_number.
DATA: v_ebelp TYPE ekpo-ebelp.
Constants Declaration ****
CONSTANTS: x VALUE 'X'.
Internal Tables Declaration ****
DATA: it_return TYPE STANDARD TABLE OF bapiret2 WITH HEADER LINE.
DATA: it_poitem TYPE STANDARD TABLE OF bapimepoitem WITH HEADER LINE.
DATA: it_poitemx TYPE STANDARD TABLE OF bapimepoitemx WITH HEADER LINE.
DATA: wa_return TYPE bapiret2.
Selection Screen ****
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME.
PARAMETERS: p_ebeln LIKE ekpo-ebeln OBLIGATORY.
PARAMETERS: p_ebelp LIKE ekpo-ebelp.
PARAMETERS: p_menge LIKE ekpo-menge.
SELECTION-SCREEN END OF BLOCK b1.
AT SELECTION-SCREEN
AT SELECTION-SCREEN ON p_ebeln.
IF p_ebeln IS NOT INITIAL.
    SELECT SINGLE ebeln INTO v_purchaseorder FROM ekpo
    WHERE ebeln = p_ebeln.
    IF sy-subrc <> 0.
      MESSAGE e002.
    ENDIF.
ELSE.
    MESSAGE e005.
ENDIF.
AT SELECTION-SCREEN ON p_ebelp.
if p_ebeln is not initial.
IF p_ebelp IS NOT INITIAL.
    SELECT SINGLE ebelp INTO v_ebelp FROM ekpo
    WHERE ebeln = p_ebeln AND ebelp = p_ebelp.
    IF sy-subrc <> 0.
      MESSAGE e003.
    ENDIF.
ELSE.
    MESSAGE e006.
ENDIF.
endif.
START-OF-SELECTION
START-OF-SELECTION.
v_purchaseorder = p_ebeln.
it_poitem-po_item = p_ebelp.
it_poitem-quantity = p_menge.
it_poitem-net_price = '20.00'.
APPEND it_poitem.
it_poitemx-po_item = p_ebelp.
it_poitemx-po_itemx = x.
it_poitemx-quantity = x.
APPEND it_poitemx.
*&----Calling BAPI function module
CALL FUNCTION 'BAPI_PO_CHANGE'
    EXPORTING
     purchaseorder                = v_purchaseorder
    testrun                      = x
   TABLES
     return                       = it_return
     poitem                       = it_poitem
     poitemx                      = it_poitemx.
     CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
      EXPORTING
        WAIT          = space
     IMPORTING
       RETURN        =
END-OF-SELECTION
END-OF-SELECTION.
LOOP AT it_return INTO wa_return.
    WRITE:/ wa_return-message.
ENDLOOP.
Thanks
Seshu

How to get net price of a given material(Just like in VA01)

Similar Messages

Maybe you are looking for