How to make character mode reports in reports 6

iam finding difficulty in setting the properties for the character-mode reports in reports 6.0!!how do i preview and print character mode reports in landscape mode
(132*66)
thanks in advance.
jitendar

thanx very much for ur advice sasha !!
i changed the layout model to character mode but the main problem is that how do i change the pagesize of the screen to 132*66!
at presenti can view only 80 chars screen!
is there any answer to it !!! can i change this setting so as to view my 132 column report on the screen first and then print on the printer !!
thanking in advance,
jitu :-)

Similar Messages

  • How to make a CheckBox for a report parameter?

    Hi,
    How to make a CheckBox for a report parameter?
    thanx

    design ur parameters forms using forms and call ur report form there

  • How to make query base delivery monthly report  link with delivery return

    Hi,
    I have facing some problem in Sales delivery report monthly. Problem is:
    1) When i make Monthly query delivery report without any delivery return and AR Credit memo, it is Fine.
    2) When i make Monthly query delivery report with any delivery return and AR Credit memo, it is not showing proper. Its showing in report including return quantity or AR Credit memo quantity.
    So, How to make query base delivery monthly report  link with delivery return and AR Credit Memo?
    Please help me regarding this.
    Mizan
    Edited by: mizan700 on Dec 18, 2010 2:50 PM
    Edited by: mizan700 on Dec 18, 2010 2:50 PM

    Hi,
    try this.
    SELECT DISTINCt T1.CARDCODE, T1.CARDNAME , T1.DOCNUM DELIVERY#,T1.DocStatus 'DELIVERY STATUS', T1.DOCDATE 'DELIVERY Date', T1.DocTotal 'DELIVERY Total', T3.DOCNUM Return#,T3.DocStatus 'Return Status', T3.DOCDATE 'Return Date', T3.DocTotal 'Return Total',T5.DOCNUM Invoice#,T5.DocStatus 'Invoice Status', T5.DOCDATE 'Invoice Date', (T5.DocTotal-T5.VatSum-T5.TotalExpns-T5.DiscSum) 'Total Before Discount', T5.VatSum 'Tax', T5.TotalExpns 'Freight', (T5.DocTotal - T5.PaidToDate) 'Total Payment Due', T7.DOCNUM AS 'CREDIT MEMO#', T7.DOCDATE
    FROM DBO.DLN1 T0
    INNER JOIN DBO.ODLN T1 ON T1.DOCENTRY = T0.DOCENTRY
    LEFT JOIN DBO.RDN1 T2 ON T2.BASEENTRY = T1.DOCENTRY
    LEFT JOIN DBO.ORDN T3 ON T2.DOCENTRY = T3.DOCENTRY
    LEFT JOIN DBO.INV1 T4 ON T4.BASEENTRY = T1.DOCENTRY
    LEFT JOIN DBO.OINV T5 ON T5.DOCENTRY = T4.DOCENTRY
    LEFT JOIN DBO.RIN1 T6 ON T6.BASEENTRY = T5.DOCENTRY
    LEFT JOIN DBO.ORIN T7 ON T7.DOCENTRY = T6.DOCENTRY
    WHERE  T1.DOCDATE >= [%0] AND  T1.DOCDATE <= [%1]
    Thanks,
    Joseph

  • How to make a link in a report open a Form in a different region of the same page ?

    Hi,
    I developped a report and a form for the same table. I also created a link and used it in my report so that when I click on the link of one record, the form is opened and display this record.
    My problem is that when I include my report as a portlet and I click on a link, the form is opened in full screen mode by replacing the page containing my report.
    What should I do in order to open this form in another region of the same page ?
    Thanks a lot

    I presume that the two regions are working fine with their individual buttons and your issue is how to make them both save with one button.
    Here is how
    a. You will have 2 ApplyMRU and 1 ApplyMRD processes for each of the regions. Right? Lets say you have 2 "Save" (i.e. label=Save) buttons, one has name SUBMIT and the other SAVE ( SUBMIT and SAVE being the requests that will be sent when they are clicked , respectively)
    b. Make the Display condition on one of the buttons 'Never'. Now it won't show when you run the page. Lets say you made SAVE's conditional Display 'Never'
    c. Go and change the condition on all ApplyMRU and ApplyMRD processes from "When Button Pressed" to "Request is contains in Expression1". In Expression1 enter SUBMIT,SAVERegards

  • Character Mode printing in Reports 9i on winXP

    I need to print a pre printed stationary Report in character mode. I am using reports9i. i had made all the basic changes,but it is not working for me.So please let me know the exact solution for this problem.This is very urgent !
    Reagrds
    Manoj Baghel

    While u run the report any messages come or not . please specify

  • How to make business content available for reporting

    The business content is loaded.The version is 3.5.3 SP2 which we have and BW version is 3.5
    I can see the business content going thru RSA1 for e.g for Sales 0SD_O01 etc
    Now how can i make the content available for reporting.When I go in modeling and click on infoprovider, infoobject it doesnt show me anything.Its blank.
    Do i have to connect R/3 to BW for reporting or load data to BW from R/3 and do reporting.Why the content is not showing in modeling?How can i make it available for reporting

    Hi,
    First you need to install the Businesscontent object first...right side window in the business content will give you the option.once it is installed then u can view it in modeling then load data and do reporting...
    If you need any details..feel free to post..If u satisfied upto some level..exibhit it by awarding points..

  • How to make Microsoft.VSTS.TCM.Steps reportable ?

    Hi,
    I am creating a report using report builder and I need to drill down report of test execution. I would need Steps counts of test case. For that I need to mark Microsoft.VSTS.TCM.Steps reportable. But when we try to upload that to server, we get error saying,
    HTML can not be set at reportable. Can you suggest a work around ?

    Hi Shri,  
    Thanks for your post.
    First, the HTML type not support reportable, so we cannot change the Microsoft.VSTS.TCM.Steps to reportable type. For which field types can set to reportable, please refer to the Reportable attribute values section information in this document:
    https://msdn.microsoft.com/en-us/library/ms194980.aspx.
    To create test case steps result and count report, you can refer to the example in this article:
    http://fluentbytes.com/creating-detailed-test-report-showing-results-test-case-steps/.
    Or try to create your custom test case result report using TFS API, please refer to the example in this article:
    http://geekswithblogs.net/TarunArora/archive/2011/10/02/mtm-testing-scorecard-using-tfs-api.aspx and
    http://blogs.msdn.com/b/paulking/archive/2011/10/12/using-the-tfs-object-model-to-populate-test-details.aspx 
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • How to make tree view in Crystal Reports

    Hi,
    We are using Crystal Reports XI R2.
    In ASP.Net, we are using tree view and same that we need display in Crystal Reports for reporting purpose.
    We have thee levels of records.
    I know the way making group by and sub group by to show in hierarchy level.
    How to achieve exact tree view in Crystal Reports as in ASP.Net
    Please give me some suggestions.
    Thanks and regards,
    Manjunath N. Jogin

    Create the report first.

  • How print in character mode printers?

    Hi,
    I need to print reports in character mode in dot matrix printers (Epson Fx 1170, Emilia 300, etc.).
    The reports are predefined to be printed in 10 cpi, 12 cpi and 17 cpi.
    How do it in a BI Publisher solution?
    Thank you,
    Ricardo Cesar

    Hello,
    I think this required to setup at printer level.
    Regards,
    David

  • How to print Character Mode in 9iDS

    Dear,
    I have come character mode reports, it run in Oracle Report 3.0 correctly and print on IBM proprinter.
    But when i compiled in 9i DS, and it runs in Builder normally and on web it runs in html but it print as bimaped. So, Please help me this regarding because very very urgent.

    thanx very much for ur advice sasha !!
    i changed the layout model to character mode but the main problem is that how do i change the pagesize of the screen to 132*66!
    at presenti can view only 80 chars screen!
    is there any answer to it !!! can i change this setting so as to view my 132 column report on the screen first and then print on the printer !!
    thanking in advance,
    jitu :-)

  • How to make fullscreen mode work using javascript

    1.I want to open the window in fullscreen mode.
    It works fine for internet explorer.
    But in netscape navigator 8.0 as the tab browsing is there
    The menu bar appears on the page.
    That i don't want.
    2. Also when the window opens in full screen mode and if after that
    i press the ctrl+N the new window doesn't open in full screen mode.
    Giving the sample code as below.
    So how to make it work in full screen mode in both cases.
    //The sample code is given
    //check.html
    <HTML>
    <HEAD>
    <TITLE> Full Screen </TITLE>
    <script type="text/javascript">
    <!--
    function myPopup() {
    window.open( "http://www.google.com/", "myWindow", "status = 1, height = 300, width = 300, resizable = 0,fullscreen=yes" )
    //-->
    </script>
    </head>
    <body>
    <form>
    <input type="button" onClick="myPopup()" value="POP!">
    </form>
    <p onClick="myPopup()">CLICK ME TOO!</p>
    </body>
    </HTML>Plz help me.
    Thanx in Advance.
    Reema.

    dont try to use a browser for what its not intended to do.
    A browser is never been intended to work in fullscreen mode. Trying to control the size a browser is displayed in, is considered bad practice and sites that do it are usually very annoying.

  • How to make character based forms with forms 6

    I need to created character based forms with forms 6.0. Can anyone help me?

    on unix machines you get 2 runtimes I think they are called ifrun60m and ifrun60.
    The first one is the normal GUI (m is probably for motif) and the second one is for character mode.
    You'll also have ifgen60 and ifgen60m for generating.

  • How to make cube data avilable for reporting

    Hello,
    I have loaded data in to info cube from flat file, and created a query using BEx Analyzer. that query does not return results and gives an error msg "No Applicable Data Found".
    Padmanabha Rao had a same problem. In his thread, expert is recommending to check whether the data is available for Reporting by Rt clicking Infocube -> Manage -> Requests tab. Ideally, you'll be able see an indicator(Query icon) if it's available for reporting.
    My cube data is not available for reporting, how can I make it available for reporting?
    Regards,
    Tejas.

    Normally when the data gets loaded to cube, it will be available for reporting unlike DSO where you need to activate the data to make it available for reporting. There could be many reasons why the data is not available for reporting;
    1. May be there is aggregrates created on the cube and the data never been rolled up to the aggregates. If you see a summation sign next to the cube then there is aggregates created on the cube and you need to fill the aggregates first before you can have the data available for reporting in the cube. To do that, manage ->rollup and start, that will fill the aggregates.
    2. If there is any request in the cube which is still red, then any request after that won't be available for reporting until you either delete the red request.
    If the problem still persist, then I would just delete all the data from the cube and reload the data again.
    thanks.
    Wond

  • How to make a population pyramid on Reporting Services 2012

    Hi,
     I am trying to make a population pyramid and can't figure out how.
     I have already looked on the web and found one link (Age Pyramid), unfortunely
    it uses a tiers component (dundas) and dates from year 2009.
     Have any of you guys already make such chart?
    Thanks for the help!

    Hi Arnaud,
    According to your description, you want to create a population pyramid chart in your report. Right?
    In this scenario, we are not clear how your wanted chart looks like. In Reporting Services, we can select a Pyramid chart in Shape chart when creating. Then you can put in proper data fields for Value, Series and Category to render it as a Pyramid.
    Reference:
    Shape Charts (Report Builder and SSRS)
    If you have any question, please feel free to ask.
    Best Regards,
    Simon Hou

  • How to make a page break in report

    Hi,
    I want a page break on the basis of the query. Is it possible to write SQL Plus Command like 'BREAK' in report? Is there any other way to make it? Is there any way using 'P_MAX_ROWS' attribute? I know in CSS2 there are some element 'page-break-before' and 'page-break-after' , but I do not understand how to implement those. Anybody can help me?
    Thanks
    Sumita

    Hi,
    You can do this in the display options tab of the report. You can break on maximum three columns. The sum which you specify in the column formatting section will be calculated for each break.
    Thanks,
    Sharmila

Maybe you are looking for