How to make concurrent programming

Hi;
if there are more than one active objet is currently are running concurrently and i want to make a dynamic array for each ruuning object.
how could i do that?
how could i be sure that each if filling in its proper array?
thankx

how could i be sure that each if filling in its
proper array?Each object will have its own copy of all non-static members including variables. So you just avoid declaring the dynamic array (ArrayList) static. If you do that each object will have it's own dynamic array. If you do declare it static all objects will share the same dynamic array.

Similar Messages

How to make Concurrent program parameter should not dependent on previous parameter if it is blank else it should be dependent.

Hi,
Lets say, we have three parameters A, B and C. B is dependent on A, C is dependent on A and B. If A value is entered, then we can list only the values of B which are related to A. If User is not entered A value then how can we list all values available in B? In the sameway for C also ( If A and B values not entered then it should allow to select a value from all available values in C)?
I don't want to put default "ALL" value and then use this in other value sets to get all values. Is there any other way using some dummy parameters? I searched in threads but couldn't find relevant.
Thanks,
Venkat.

Hi,
Lets say, we have three parameters A, B and C. B is dependent on A, C is dependent on A and B. If A value is entered, then we can list only the values of B which are related to A. If User is not entered A value then how can we list all values available in B? In the sameway for C also ( If A and B values not entered then it should allow to select a value from all available values in C)?
I don't want to put default "ALL" value and then use this in other value sets to get all values. Is there any other way using some dummy parameters? I searched in threads but couldn't find relevant.
Thanks,
Venkat.

How to make my program forcefully errror

hi 2 all
how to make my program forcefully error out even i have to get data
regards
siva

Hi Mate,
Just remove the quries which you execute
Thanks
Kash
www.mkashu.blogspot.com

How to make labview program to get average value of 200 reading from multimeter (by using loop)

Hello
How to make labview program to get average value of 200 reading from multimeter (I using using loop) to read voltage from mulmeter but I like to get average value of all of 200 reding how can I do that?
Thanks
Wee
Solved!
Go to Solution.

Another idea with less programming - take advantage of the "free" array that comes with a Chart - i.e. the History Data.
1) Wire your DMM data to a Chart. (You can set the chart to invisible if you don't plan on using it in the GUI).
2) Set the Chart History Length to 200 (right click on the chart, click on Chart History Length...)
3) On the block diagram, use the History Data Property Node, wire it to Mean.vi, and you're done.
Easiest running average ever.
Message Edited by Broken Arrow on 04-07-2010 11:36 AM
Richard
Attachments:
EasyAvg.jpg ‏8 KB

How to view concurrent program LOG from custom FORMs

Hi,
How to view concurrent program LOG from custom FORMs?
Thanks
ESL

Hi Thanks for your response....
lets assume there are 2 buttons, first button to submit concurrent program and second button to view concurrent program output/log.
Actually im able to submit concurrent program from oracle custom form(6i) in ebusiness(11.5.0.2) i.e first button (WHEN-BUTTON_PRESSED buitin).
Rather user navigating to VIEW-> REQUEST, i would like to give option to user to view concurrent program output/log when user clicks on second button (WHEN-BUTTON_PRESSED buitin)
How can i achive this?
Thanks,
ESL

How to assign concurrent program to concurrent manager

Hi:
How to assign concurrent program to concurrent manager? or the other way around. It was an interview question. for R12 or 11i
Thanks

Srini Chavali wrote:
All concurrent programs, by default, will be run thru the Standard Manager. If you need to have a specific manager run a program, you need to define specialization rules (in Concurrent > Manager > Define, "Specialization Rules" button) for that manager.
http://docs.oracle.com/cd/E18727_01/doc.121/e12893/T174296T174302.htm#fndcpdcq.QUEUE_CONTENT
And that's exactly what is mentioned in the docs referenced in my previous reply.
Thanks,
Hussein

How to make a program for backgroung processing used servlet

how to make a program for backgroung processing used servlet

well i need the coding part written in servlet ,in which servlet is always ready for accepting a client request.

How to make my program case - in sensitive?

Hi,
Iam writing a SELECT query in report for retrieving the address number by giving address details like street, city and post code.But my program is case sensitive such that if the user inputs either in Upper Case or Lower Case, it will not work.
For eg: suppose the city is Cape Town. If the user inputs like CAPE TOWN or cape town ( via Selection Screen ), then it won't work.
How can i make my program case- in sensitive?? please suggest..

This is possible. I have done something similar to it in my search programs.
For this we need to make a subroutine. In this subroutine we first need to convert the case into upper case using
TRANSLATE string TO UPPER CASE.
then prefix and postfix this string with &,
_and if this does not work then we have to break the srting entered by the user on basis of spaces and prefix and postfix it with &. _
Now pass this string to the query and it will definitely get the result.

How to convert concurrent program out files .out file to .txt files in

Hi
Trying to know if there is a way to convert the concurrent programs' output files witn '.out' extension to files with extension '.txt'
thanks
kp

Why you want to change the file extension to txt instead of out?
I believe you cannot do and you are not supposed to change it. Controlling the report output to different types can be done as explained in these docs.
How to Setup The Report Output to Different Viewer Types in Oracle Applications 11i [ID 184375.1]
How to Control the Name and the Application that Opens the Concurrent Request Output File on the Client? [ID 316752.1]
Thanks,
Hussein

How to default Concurrent Program delivery options to Email.

As of r12.1.3, we have a new button in concurrent request submission window called "Delivery Opts"
Clicking that button opens up a new window with delivery options.   Second tab contains the Email option.
I have a need where a concurrent program is submitted it should email the output by default without needing to manually enter email details every time.
I know that this can be done via scheduled concurrent requests. But in my case this concurrent program will be part of the shipping document set and will be submitted through the form and not SRS.
In concurrent program definition window under AOL, we have ability to assign default printer, but we do not have any ability to assign default email functionality.   It would be nicer if we had one.
That having said, does any one know how to do this ? How can I submit a concurrent program from a form and default to email option ?   Where would I control this setup?
Please advise.
Darsh

you may not be able to do that by setup, but if you submit this request using pl/sql code you can do this
please check example below
DECLARE
l_conc_id NUMBER;
l_user_id NUMBER := xxx ; -- you can assign it from profile option value
l_resp_id NUMBER := xxx ; -- you can assign it from profile option value
l_resp_ppl_id NUMBER := xxx; -- you can assign it from profile option value
l_boolean BOOLEAN;
BEGIN
l_boolean :=
fnd_request.add_delivery_option (TYPE => 'E', -- this one to speciy the delivery option as Email
p_argument1 => 'Testing the Email option from back end', -- subject for the mail
p_argument2 => '[email protected]', -- from address
p_argument3 => '[email protected]','[email protected]', -- to address
p_argument4 => '', -- cc address to be specified here.
nls_language => ''); -- language option);
IF l_boolean = TRUE THEN
FND_GLOBAL.APPS_INITIALIZE (l_user_id, l_resp_id, l_resp_ppl_id); -- intialize the apps.
l_conc_id :=
fnd_request.submit_request (application => 'FND',program => 'XXXXXXX', -- you concurrent program.
start_time => SYSDATE,sub_request => FALSE);
END IF;
END;

How to make my program faster?

I have a program which produces two elements array. In normally the program ends in microseconds, however when I organize my program to send the array as a data to DAQ.mx write and the array will be the voltage output from my NI USB-6012 DAQ, my program ens in 40 seconds. How can I make my program faster? Is there any solution?
I have attached the normal program and with DAQ.vis.
Attachments:
step step 1.vi ‏15 KB
step step 2.vi ‏34 KB

Program 1 runs 5 times and program 2 runs 41 times per loop. the total number of inner iterations is 25 vs. 1681 for a 67x difference.
Program 1 and program 2 have no timing information, thus spin at a undefined rate.
Program 2 does single point hardware IO and also has no timing information. The speed will depend on the hardware.
Running at a hardware dependent rate is not a good idea in general, because the speed will vary with every change in hardware and is not deterministic. You don't even know what occurs first at each iteration: the input or the output.
If speed is important, what you should do is use an improved variation (Yes, use FOR loops and ramps!) of program 1 to generate the final data array, then do a single "Nchan,Nsamp" IO, running input and output synchronized hardware timed off the same clock. This way you can select any acquisition speed up the the maximum supported by your DAQ hardware. It will be fast and at an exactly defined rate as it should be!
Try it!
I am not familiar with your hardware: USB-6012. can you give a link to the product page?
LabVIEW Champion . Do more with less code and in less time .

Help on how to make a program on Calendar of the year

I'm new to java programming.
Our teacher assigned me to make a program for a calendar of the year.
I'm confused on what to do. Could you give me some tips on how to
make a successful calendar of the year program?
What shall I study first to create an output like this....?
The program should run like this!!!!
Enter the year from 1990 to year 2050.
Enter the month of the year entered.
Then displays the calendar.
Ex.
SEPTEMBER 2002
Sun Mon Tue Wed Thu Fri Sat
1 2 3 4 5 6 7
8 9 10 11 12 13 14
15 16 17 18 19 20 21
22 23 24 25 26 27 28
29 30
Hoping that you would reply.
Thank you very much!!!

Don't want to do your homework. You should think about how you might do it yourself first.
However, the class java.util.Calendar will be useful to you. Read up on that in the API docs.

How to Know Concurrent Program Finish

Hello,
We are on Oracle EBS 11i10.2 and are creating a procedure that executes a Concurrent Program, and we need to know in this procedure when the Concurrent Program finishes, does anyone know how to do this?
Thanks

Hi,
Please see these threads.
concurrent request status
concurrent request status
How to set the Concurrent request completed with warning?
Re: How to set the Concurrent request completed with warning?
Thanks,
Hussein

How to run concurrent program one after another

hi,
i have three concurrent program which are inter linked. how to set to run the concurrent program one after the another, ie.. not to run simultaneously.
regards
Yesukannan

Hi Yesukannan,
We need to call the wait for request in between the calling programs...
Example:
Package Pack1
Procedure P1 ( ... )
Procedure P2 ( ... )
Procedure P3 ( ... )
Procedure call Concurrent
call P1 -- Capture the request id here
wait for request -- send the above request id to this procedure.
call P2 -- Capture the request id here
wait for request -- send the above request id to this procedure.
call P3
end Package Pack1
Regards
JA..

How to run concurrent program from a menu

Hello, I have a responsibility menu and want to enable the user to run a concurrent request by clicking on a menu function. Say I have a prompt called "Payslip Report", clicking on it will now run a concurrent program called "Payslip Report" but the user will now have to enter the parameters for the report.
How do I achieve this?

Hi
You can achieve this defining a new function for the standard submissions form with parameters to specifically launch the payslip report, and even specify values for its parameters. Information can be found on System Administrator Guide under the "Customizing the Submit Requests Window" topic. The steps would be:
- Create a new function using the Standard Request Submission Form (FNDSRS)
Give it a meaningful name such as Launch Payslip Report, specify form as type and the user form name of the FNDSRS form
Use the following parameters, specifying as values the short name of the payslip report and the application it belongs to:
CONCURRENT_PROGRAM_NAME=PAYSLREP PROGRAM_APPL_SHORT_NAME=PAY
- Use your new function in Your menu and assign the prompt "Payslip Report"

How to make concurrent programming

Similar Messages

Maybe you are looking for