How to make cost element field appear when create network activity service

Hi All,
Please help. We create a project ,wbs and network activity using external service. How can we make appear the cost element when the service master appear. The system require cost element but we cannot see the cost element field.
Steps :
*. CJ20n.
*. Create WBS and network header
*. Then network activity for external service.
*. Then it appears service specifications : ext specs Task List Maintain
*. I Put Service no, and the error message appears :
Please enter a cost element
Message no. SE121
*. But we can find where the cost element is. It seems the field disappear.
PLease help.
Thank you.
Nies

Hi,
Yes. It is already blank. But the cost element field still not appears when we create activity service. It shows :
Please specify a valid account assignment
Message no. SE181
Diagnosis
You have entered an account assignment category in the document item for which an account assignment is mandatory.
All account assignment lines in the service specifications either have been deleted or are inactive (e.g. account assignment lines of a contingency item).
Procedure
Please enter an account assignment for the services or value limits.
The entry of an account assignment is unnecessary if you choose "unknown account assignment" in the document item.

Similar Messages

How to make WBS element field in Notification a mandatory.

How to make WBS element field in Notification a mandatory.
Should I use USer Exit.
In cutomization I didnt find ant standard customization

Hi,
If it is about WBS element field in Maintenance Order then check up user exit ;- IWO10009 PM Order: Customer Check for 'Save' Event
For Notification i am not sure whether this field is ther , but anything u can perform checkings via
QQMA0014 QM/PM/SM: Checks before saving a notification
Alternatively u can also explore via Transaction variant SHD0 ..
regards
pushpa

How can I make the comments field appear when the operator is debugging a test?

When a test is being written the comments field is being utilized for information relating to what the test is doing and how to solve certain problems that arise. It is basically a quick place for the technician to look at when they are attempting to debug a board. However it appears when you view the sequence files these are off to the right side of the screen but when running the debug engine and the technician sets a break point then these comments are no longer visible to the user off to the right of the screen. Is there any way to have it include the comment in the data displayed when tracing through a test step by step. The technician can double click on each step but it would be alot mor
e user friendly and timly if these could be displayed just to the right of the execution flow column.

Hello John,
I assume you are talking about the sequence editor. Unfortunately, there is currently no way to view the comments associated with a step inside of the execution display window (i.e during run-time). If you are using the operator interface, then you may extract the comment associated with a step and post a custom UI message that contains this information. The operator interface can then be modified to respond to this UIMessage and update its display accordingly.
To post a UIMessage with this data, you must first obtain a PropertyObject reference to the step you are trying to extract the comment from. Then use the "Comment" property of the PropertyObject class to obtain the comment value.
Unfortunately, the Sequence Editor discards all custo
m UIMessages, and you will have no way of viewing the comment using the above method.
Hope this helps.

How to make non editable field after requestor created the shoping cart

Hi,
i need to make non editable field (Price field) after requester created the shooping cart.The field should be non editable only for requster .
this i need to make when workflow triggers when the buyer sends back the shopping cart to requester.
one solution which i found:depend on the status of the shoping cart
but i dont know whether it is correct way.
if not please suggest me the solution.

Hi,
You can implement the BADI" BBP_UI_CONTROL_BADI".
You can check for the role of the user who has logged in(e.g. for user REQUESTER,there will be a distinct role to idnetify that the user is a requester) and then acc set the display properties for the field PRICE.
For sample code pls refer the foll links:
Sample code for BBP_UI_CONTROL_BADI
Re: Hiding Shopping Cart Fields in SRM 3.0
Re: How to Hide the attributes from template BBPSC01?
Re: How to validating total value in shopping cart
Re: Price filed in Shopping cart should be in display mode
BR,
Disha.

How to make tiny squares not appear when printing?

I have Adobe Pro X and I am having issues with printing. When I print a pdf document, sometimes the text is replaced by squares. I have determined that this is caused by certain font. I know for a fact that the pre set font used in "add text box" is one of those fonts. I have read that you can embed fonts and that will solve the problem of the squares.
This image is of a sample of the issue. I have to take product documentation for manufacturers and provide these to clients for approval. So, this issue is not directed at just one manufacturer provided pdf. The squares also appear in the text box at the top.
Questions:
1. How do you change the pre set font in the "add text box"?
2. How do you determine the font of a pdf document?
3. What is the step by step process to embedd a particular font?

When you use the "Add text box" (also known as the Typewriter tool), you're actually placing an annotation on the PDF. You can see this if you open the Comments pane and view the Comments List. You can change the font for the annotation by using the Selection tool and then double-clicking on the text. This will bring up the Typewriter tool properties where you can see what font is being used and change it if necessary. In your case, you don't need to embed the font because you're working within an annotation. What you'll need to do instead is to flatten the annotation so that it becomes part of the page content and no longer editable as an annotation. To flatten an annotation you can use the Preflight tool (which is only part of Acrobat Pro. When you open the Preflight tool, twirl open the PDF fixups arrow and select "Flatten annotation and form fields".

How to make metadata fields required when creating folders

Hello all....
Related issue with SR 3-6472229431 and SR 3-6471130611.
We're using DIS 11.1.6 64-bits (2011_11_29 (rev 9756) 11.1.6.97) in a Windows 7 64-bits workstation (with UCM 11.1.1.5 in a Linux machine). The check-in of images to UCM goes fine.
I'm trying to make some metadata fields required when creating a folder. These fields are required when making a check-in, but not when creating folders.
Folders_g is enabled. DesktopTag too.
EDIT: Patch: 14695303 - WCC 11.1.1.5.0 BUNDLE ( MLR 16 ) NOV 6 2012 applied.
Is it possible?
Thanks for all.
Edited by: fgomes on 22/11/2012 03:24

After reading your response and rereading the original question a bit closer, the metadata prompting feature does not apply to creating new folders, only content.
Again, though, I think the focus here is in the wrong place. The metadata applied to a folder is intended to be ultimately applied to the content. You can build global rules that fire on submission of content to check if a field has a value, and throw an error if the value is empty.
If you expect users to create folders (and actually apply any metadata to the actual folder itself), you will be disappointed. Experience shows that users are not interested in that level of detail when creating content, let alone folders. Letting typical users create folders is a bad idea anyway, as they tend to create the same inefficient folder structures they previously created in file shares within Content Server.
If you need to tightly control folder attributes, you'll be better served by locking down the ability to create new folders. Otherwise you're looking at some type of customization. Keep in mind that you won't be able to customize the right click behavior of DIS. Any changes to DIS would have to be an enhancement request.

How to make read only field in Task list?

Hi All,
How to make read only field in Task list?

This can be done one of two ways:
1. Customize the form in Infopath, right click your field and disable the control.
2. Use JavaScript/jQuery on the page to disable the element.
Andy Wessendorf SharePoint Developer II | Rackspace [email protected]

Vendor Master Management - How to make 'Corporate Group' field an autoupdat

Vendor Master Management - How to make 'Corporate Group' field an automatically updated field
Frnz,
I am doing a Spend Analysis and thereby restructring some aspects of SAP and business processes. One of the intiatives is to leverage the 'Corporate Group' field in Vendor Master for getting the consolidated spend visibility at the corporate group level of vendors. So far this field wasn't been used to effect. I can update it manually, but the question remains is how do I do with the change management of the corporate group of large vendor base in the scenario of everhappening Mergers and Acquisitions. Are there any alternatives anybody can suggest ? (Like linking D&B numbers etc)
Thanks in advance for your suggestions..

Hi Shiv,
Let me elaborate the purpose of using this field. I want to have a consolidated spend visibility across a corporate group which has multiple vendor codes. Its difficult everytime to group the spends of these vendors manually especially when the number of vendors are too high. Also sometimes the names of vendor companies may not indicate that these are from same corporate group but in fact they could be. In order to have the reports generated on corporate groups, I must maintain this field in vendor master or a Z table. But the problem here is, it should be possible to update this field as and when there are any mergers or acquisitions at vendor side and the corporate group of a particular vendor gets changed due to this. So this has to be effected in vendor master or Z-table automatically. I do know that there are certain agencies like Dunn & Brad (DNB) which provide possibly the details on corporate group of a company but its not fully effective for Indian Vendors as its not mandatory on them to have DNB number & also its a disconnected process and I was looking to connect it seamlessly to Corporate Group field so that I need not bother to update these things manually everytime. I also wanted to explore various possibilities of doing this.
I hope I have spelled it out correctly.

How to make a summary column appear only once (in the first page only) in SSRS 2008?

Hello Everyone,
How to make a summary column appear only once (in the first page only) in SSRS 2008?
Regards
Gautam S
Regards

Hi,
Assuming you have test data like this ;
select 'abc'as [GROUP],'NN' name , 1 id
union all
select 'abc' as [GROUP] ,'PP' name , 1 id
union all
select 'abc'as [GROUP],'RR' name , 2 id
Step1 : take Tablix with row group as your group Name .
Step2 : right Click on Row Group Details -> Delete-> Delete Group Only
Step3 : In Count Cell use below expression ;
=CountDistinct(Fields!id.Value)
Follow this link;
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/b6b45917-0a26-4d15-be46-2c6a2697d6e9/distinct-rows-sum?forum=sqlreportingservices#5ffdee06-c2c8-44ea-a3a5-b958488bb6b5
Thanks
Please Mark This As Answer or vote for Helpful Post if this helps you to solve your question/problem. http://techequation.com

How to make Sales Office field mandatory in VA01 initial screen?

Hi,
How to make Sales Office field mandatory in VA01 initial screen? I mean in the first screen where we enter the document type and the sales area?
Regards,
Ajit

Dear Deepak,
Thanks for the clarification.
But, as far, I have understood the query - it is very simple and that is..
Whenever one creates a Sales Order (T.Code: VA01), Parameter: Sales Office needs to be mandatory (for all Sales Order, irrespective of Customer Account).
Until-unless, user won't enter the parameter: Sales Office, System will not lead to next page (now, here we need to enter Customer/ material etc...).
I have answered the query, in this regards, only.
Best Regards,
Amit.
Note: Pls. correct me, if I am wrong. Thanks for everyones guidance.

How to make tax classification field mandatory in sales order ?

Hi,
while creating sales order, " how to make tax classification field mandatory ".
Please tell me the procedure.
In tcode OVA2. what are the entries for fields,table.
Regards,
sapsduser

Dear ,
Could you please share why you want to make tax Classification field mandatory in sales order.
Maintain Tax classification field for customer in Customer Master Data = (Sales Area Data - Billing document Tab page)
Tax Classification field for Material in Material Master Data = Sales Org. 1 View.
While creating sales order and enter customer and material system automatically fetch the tax classification related data into sales order.
Tax is calculated based on the ship to party.
Hope this will help you.....
Regards,
Manoranjan.

How to make valuation type field not changeable in delivery tab of PO

Hai friends,
I am new to badis..please guide me to solve the issue...
how to make valuation type field not changeable in delivery tab of PO...
The field shd be in display mode only ...actually...there a badi has been used before
to get valuation type from a ztable depending on material and plant...
Now ..my requirement is that the user shd not change the default value brought from the ztable...

Hi SRINIVAS,
You can achieve this from BADI only if BADI is allows you to do this. You cannot achieve everything from a BADI. Check if there is any expoting field in the methods that can be ticked for making the field in display mode. If not then you cannot achieve this from BADI.
The field you want to default to display is a standard or zfield. If z, then you can changethe attribute of the screen field to Output only.
Regards,
Manish

Cost Element Field

Hello All,
Would be glad to know the field name of "Cost Element" and from which table i will be able to access it. The tables that my report is using is GLT0, GLPCT, ZCOST, ZGLMAP000.
The modification that is required is that Account Number (GLT0-RACCT) which is an selection screen parameter has to be replaced with the Cost Element field.
Thank you,
- Sravan

Hello All,
With help from the SDN, i was able to reference the Cost Elements contained in a Cost Element Group and also to provide a Value help for the Cost Element Group.
The Following Function modules had been used :
parameters    : s_ceg1(15) type c.
data:    begin of s_setid occurs 0,
         s_setid LIKE sethier-setid,
         end of s_setid.
data:    begin of s_setvalues occurs 0.
         include structure SETVALUES.
data:    end of s_setvalues.
1. K_GROUP_SELECT - for the Value help
   under EXPORTING pass the CLASS = '0102' and
                            FIELD_NAME = 'TKB9E-SETNR'.
   under IMPORTING          SET_NAME   = S_CEG1
2. Then used : G_SET_LIST_SELECT
    under EXPORTING pass the CLIENT    = SY-MANDT
                             SETCLASS = '0102'
                             SHORTNAME = S_CEG
    under TABLES : TABLES
           MATCHING_SETS         = S_SETID
3. Then Used : G_SET_TREE_IMPORT
EXPORTING
    CLIENT                          = SY-MANDT
    LANGU                           = SY-LANGU
    SETID                           = S_SETID
TABLES
    SET_VALUES                      = S_SETVALUES
Hope this will be helpfull to the other SDN contributors/participants.
Happy Coding,
- Sravan

Cost element (Field name SAKTO)

Hi all,
We need to update the existing cost element field with new one in the Master Reciepe,
Can any one give me all other areas across modules where this field has to be updated.
Pls be kind to explain in detail.
Thanks in advance
Regards,
KK

Hi all,
We need to update the existing cost element field with new one in the Master Reciepe,
Can any one give me all other areas across modules where this field has to be updated.
Pls be kind to explain in detail.
Thanks in advance
Regards,
KK

To make cost centre field enable in VA01

Hello All,
Can any body suggest how to enable cost centre field in VA01 with out entering the value for cost centre. Is there any user exits or badi ?
Regards
Srinivas

USEREXIT_SEND_COBL_HEADER or USEREXIT_SEND_COBL_ITEM in MV45AFZB will change the PBO attributes of the coding block screens in VA01/VA02 but I would check your configuration first.

How to make cost element field appear when create network activity service

Similar Messages

Maybe you are looking for