How to make & edit multiple query report

hi,
how to make multiple query report & i have an existing multiple query report when i edit it all the structure gets disturbed whenever i want to add or delete any column from an query.
how to do this ?
txs

Perhaps you have "Flex Mode" selected in the Layout Editor? It's the button next to the padlock button.
Message was edited by:
Dave Hemming
Also PS: Vaguest. Question. Ever.

Similar Messages

How can I edit multiple clips with different frame rates on the same timeline

how can I edit multiple clips with different frame rates on the same timeline

You do not want to edit material from different frame rates on one timeline. You CAN do this, but it is a very bad idea - and this is why.
Once you establish the sequence frame rate - lets say it is PAL material at 25fps, any material that you drop into the sequence other than 25 fps will have to be changed to play at 25 fps. If the material you add is NTSC (29.97), FCP will DROP 5 frames per sec to bring the frame rate down to 25 fps. Which 5 get thrown away? Every 6th one. This yields a funky cadence that becomes even more complex as as there are also interlaced fields (DV/NTSC is an interlaced format). Oh, and by the way, the image sizes are different as well. DV/PAL has 576 lines of resolution and DV/NTSC has 480. FCP has to scale up the NTSC to fit the PAL frame.
You do not want FCP adjusting these things on the fly. You want to do a thoughtful (and time consuming) conversion so that you end up with all your material in one format with the best possible image from the conversion process. Compressor can do an adequate job with Frame Controls turned on. The Natress Standards Conversion FCP plugin is another way to go. A third option is to find a post house that can do the conversion for you using a hardware based process.
The good news is, once everything is in the same format, editing it will be painless and the output process very quick.
Whatever frame rate/ image size you select, I'd suggest using ProRes for the codec. It is 4:2:2 color and will withstand color correction and composting with much more grace than any variant of DV based codecs.
Have fun.
x

How to make a multiple request without waiting for a response in java ?

A more specific question:
how to make a multiple HTTP request without waiting for a HTTP response in java (using httpURLConnection)?
Thanks

Thanks for responding.
But i want to make further request to the same resource URL. I want to reuse the connection, don't want to create a new connection for each of individual request.
How can i do that using HttpURLConnection ?
Thanks.

How to make editing cell to show up caret and taking keyboard event

Hello everyone:
I have the following problem with table editing.
1. using mouse clicking, the editing cell will have cursor and taking keyboard event.(no problem with it)
2. just type in data, it will show up in the selected cell, but the editing cell do not have cursor visible and also do not fire the keyboard event.
I have problem with this one. So how to make editing cell to have caret visible and taking keyboard event.
Thank you very much!
--tony

Hi,
you should subclass JTable and overwrite two methods.
1. protected boolean processKeyBinding(javax.swing.KeyStroke ks,
java.awt.event.KeyEvent e,
int condition,
boolean pressed)
to store the current keyboard event,
2.public boolean editCellAt(int row,int column,java.util.EventObject e)
to fix the problem with isCellEditable and curret position and direct the event into proper place.

How to make the generated xl reporter un editable

Dear Experts
One of my client is asking , they want to generate the report in xl reporter (all kinds of report) but the end user must not edit that report. He just need only read only facility.
So how to generate a read only report in xl reporter
I need some help regarding this
Thanks
Regards
Kasi

Dear Experts.
If i am giving a password for the Xl reporter, I am unable to generate the xl reporter, its showing error.
and instead of the password security, if i protect the sheet, its working, but the problem is, end user can unprotect the sheet and able to edit the report.
My scenario is. I want the end user to generate the report, but he should not be in a position to edit the generated report.
Expect the help for solving this issue

How to make a parameter base report?

I am making a report on employees and departments but i want to choose employees for some required departments for that i need to use parameter, and i need help that how will i make a parameter in reports builder 10g.
I am able to do it by writing a where clause in query but now i want to do it from user parameters. Seek help here.
Maz

Here is a list of things to do. Let me know if anything is not clear.
1) In your main query create a lexical parameter at the very end of you where clause ( dont put and &p_where just &p_where)
&p_where
2)Create a user parameter with datatype character and width 200
ex: P_departments
3) Create a field on the Paper Parameter Form
4) Click on that field and go to the List of Values (if you want a lov...) and insert the following
Ex:
select 'All',' All Departments' from dual
union
select to_char(department),to_char(department)||' - '||department_name
from departments
order by 1
5) Go to Report Triggers > After Parameters and insert the following
Ex:
begin
:p_where := null;
if :p_departments not like '%All%' then
:p_where := :p_where ||' and table.department = '||:p_departments;
end if;
return (true);
end;
This will allow you to select a department or leave it at the default of all departments. It will also allow you to remove the hardcoded statement in your where clause such as
where department = 'HR'
Edited by: DOUBLE U on Aug 3, 2011 3:32 PM

How to make a precalculated query

Hi guys!,
my problem is this: i have a query, but it last too much to execute, i heard about do it precalculated throught a job after the load of the infocube, i dont know how to make a query precalculated, 1- please can you tell me how to do it step by step? , 2- the query has one variable of input (You have to write Month/year ), how can i do to the precalculated query take this variable automatic of the actual month/year, thanks

Hi Jorge,
This link has step by step Procedure....
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a101b894-0b01-0010-6c90-e70766b33256
Hope it answers your query,
Thanks

How to Make DFF in Query Mode only ...

Hi Gurus,
I have some Doubts in DFF, Say I have Two Segments
Segment A: Driving Liciense
Segment B: Passport Information
My Requirment is how to make Segment B as Query mode only ..
Any one pls help me on this ...
with regards
User600722

Hi
Can't remember if there's an option in the flex definition form, as enable check box will cause the segment to not show if unchecked. If that's not the solutions, there's the flex definition call that may enable You to modify the flex definition on form launch, but You'll have to look on the flexfield's user guide as I'm not sure if read only can be applied to an individual segment or it's for all of them.

How to make reifications and query to obtain them

Hello;
If the option expressed in the previous thread is unavailable the other option is make reifications over the triple.
There is no documentation about how to make reifications and how is expressed in a SDO_RDF_MATCH query
Can you help me ?
Regards
Isidro

Example: if you want to express the fact that :John :fatherOf :Matt is recorded in the document :birthCertificate, it could be done using reification as follows:
INSERT INTO family_rdf_data values(100,
SDO_RDF_TRIPLE_S('family',
'http://www.example.org/family/stmt1',
'http://www.w3.org/1999/02/22-rdf-syntax-ns#type',
'http://www.w3.org/1999/02/22-rdf-syntax-ns#Statement'));
INSERT INTO family_rdf_data values(101,
SDO_RDF_TRIPLE_S('family',
'http://www.example.org/family/stmt1',
'http://www.w3.org/1999/02/22-rdf-syntax-ns#subject',
'http://www.example.org/family/John'));
INSERT INTO family_rdf_data values(102,
SDO_RDF_TRIPLE_S('family',
'http://www.example.org/family/stmt1',
'http://www.w3.org/1999/02/22-rdf-syntax-ns#predicate',
'http://www.example.org/family/fatherOf'));
INSERT INTO family_rdf_data values(103,
SDO_RDF_TRIPLE_S('family',
'http://www.example.org/family/stmt1',
'http://www.w3.org/1999/02/22-rdf-syntax-ns#object',
'http:/www.example.org/family/Matt'));
INSERT INTO family_rdf_data values(104,
SDO_RDF_TRIPLE_S('family',
'http://www.example.org/family/stmt1',
'http://www.example.org/family/recordedIn',
'http://www.example.org/family/document/birthCertificate'));
A sample query involving such reified statements:
SELECT s, p, o
FROM TABLE(SDO_RDF_MATCH(
'(?stmt rdf:subject ?p) (?stmt rdf:predicate :fatherOf)
(?stmt rdf:object ?o)(?stmt :recordedIn ?s)',
SDO_RDF_Models('family'),
null,
....

How to make editable the colums of table control in the PBO

Hello Experts!
I`m using the table control in dynpro, and i want to make editable some colums depending of some values.
How can i do that?
Thanks!

Hi
U need to change the screen attributes of colunm by statament LOOP AT SCREEN/ENDLOOP into the loop of table control in PBO:
PROCESS PBO.
   LOOP AT ITAB ......
        MODULE LOOP_SCREEN_TC.
ENDLOOP.
MODULE LOOP_SCREEN_TC.
IF ITAB-FIELD1 = .........
     LOOP AT SCREEN.
        IF SCREEN-NAME = 'ITAB-FIELD2'.
           SCREEN-INPUT = 0.
           MODIFY SCREEN.
        ENDIF.
    ENDLOOP.
ENDIF.
ENDMODULE.
Max

How to make edit in place with spry

HI
im new to spry im using DW 8 and i want to make edit in place
with it can i? how?
thanks in advance.

Anyone please?
same question here.
Thanks.

How can I edit custom query in Data Insight

1. Whenever I click the edit sql query by right clicking on the custom query, the system hangs up and does not proceed further
2. Once you create a query without retrieving data results, is it possible to change to retrieve the data and how.
Thanks - Mahrukh

Hi Mahrukh,
I do not have this issue. What version of Data Insight are you using? What database is your metadata repository? What database is your source data in for the Data Insight query you are writing? Have you tried double clicking on the custom query - this should open it up for you to be able to edit it as well!
You should be able to open the query to edit it and either click the return data box or un-check it for any type of query.
Thanks,
Denise

How to automatically attached multiple PDF reports to an e-mail and send

Hello.
I have a requirement to generate multiple PDF reports using Oracle Reports 6i on the web, then automatically attach these PDF reports to an Outlook e-mail and then bring up the Outlook e-mail dialog box so the user can modify the e-mail (such as adding more attachments, adding a CC, BC, change the message text) before sending the e-mail. I want to be able to initiate all these tasks from Oracle webforms 6i in a three-tier environment.
I have already read various notes and solutions but none of them address all my requirements. Examples:
1. Using OLE to interface with Outlook - but OLE does now work on the Web
2. Using Java stored procedure or UTL_SMTP - but this does not bring-up an e-mail dialog box
3. Using mailto: in HTML and web.show_document - but this does not allow you to attach a PDF file
Can you please advise on possible solutions to my requirements. Thank you very much.
Regards,
Armando

Here is a great resource for sending binaries.
http://otn.oracle.com/sample_code/tech/pl_sql/htdocs/Utl_Smtp_Sample.html
You'll want to use utl_http to run each report with a destype=file and then have another procedure running to check to see when all of your reports have finished. After they are finished, you would run the stored procedure to get all of the binaries, attach them in an email and then send it.
If you want to concate all of the PDF files into one large file, you can do this with a Java stored procedure using iText.
http://www.lowagie.com/iText/

How do make link between query and UDF

How do you link a query to your UDF after you created the query and the UDF?
Also do you have to set the UDF as type "general", and "link"?
Please take me thru step?

oh good - a discussion about whether to use "link" or "image" when having an image connected to a product!!!
Billy and Suda - We had fun with this one some time ago in a project collecting additional data and images for the customer's products on the market. As we were ramping up the project, we tried both ways of connecting an image to a product and there was a few drawbacks we found with using the UDF type of "General" and "Image":
1. The image was placed directly on the UDF portion on the Item Master - they were working in large TIFF (?) formats and the picture just looked horrible. The approving manager could not tell if the image should be approved for press or not. When he double-clicked on the image in the UDF portion it brought up another SAP window that wasn't quite crystal clear.
2. The image took up so much room on the UDF portion of the Item Master that the data entry personnel had to constantly scroll down to enter the other data points (color, size, branded promo, mixture, etc - there were about 12 fields). Talk about being ticked!
3. While using the "General" and "Link" it addressed those concerns BUT there was one extra enormous advantage with this General/Link method. When the image was brought up, it opened up the image automatically in a standard picture editor/manager program. If they liked what they saw, they continued foward with the approval of the image for press runs. If they did not like the image, they were able to manipulate the image at the moment and then follow through with approval (time saver for sure!).
I am sure it all boils down to what the customer requirements are, but some other clients I demoed this to wanted to switch immediately after seeing that! But definitely something to think about if you are planning on connecting an image to a product...
Oh and she really is correct, Billy - I have never heard of anyone linking a query to a "link" or "image" type...I don' t know how you would even do that as the "link" or "image" selection leads you directly into the attachment and/or storage path and location...
take care - Zal

How to make / edit playlists by genre..ex. country.. rap..r

how do i edit a playlist on my zen micro? when i create a playlist it just pulls all of my songs into that playlist , i can't put indivual songs into different playlists, so i have big playlist.... HELPDG

DG2392322: There's a thread here on how to create and edit playlists on the player, but player based editing is not particularly easy.
You are better to use the PC, and as Jake has said Notmad Explorer offers some of the best editing features. You can still use the software that came with the player though, like MediaSource and Zen Micro Media Explorer.

How to make & edit multiple query report

Similar Messages

Maybe you are looking for