How to make iTunes 64 bit work with iPad Air in win 8.1 64 bit?

I have purchased - or updated - my iPad to Air and recently noticed that my windows (8.1 pro) environment iTunes refuses to work with iPad by telling me that I need 64 bit version of the software. My environment is genuine Core i5 system with windows 8.1 pro 64 bit and iTunes is installed as instructed. I have removed all Apple components and reinstalled, but no success. One odd detail is that every time when Apple updater informs me that there is new iTunes available and I choose install option, installation fails and I have to remove manually all Apple components and then install iTunes. Installation seems to go fine, but during installation there is a phase when I can briefly see that system is rollbacking something - could this be vital? Like loosing something that makes system to refuse to install required things that make things work as they should? Like: are there known hw/sw issues that make installation process change installation from 64 bit to 32 bit during installation?
--IKemario

Apple iPad appears to be under "Portable Devices" section and driver is from Microsoft. There is no driver under USB-section and instructions that provided in first reply I have gone thru and they are no go with this problem - they are more likely for older iPod etc devices and dot with issue to deal with 64bit/32bit things. The picture (image.jpg) gives me unfortunately just general error...
--IKemario

Similar Messages

How to make the wifi connection with Ipad in china since it requires user's name and password.

How to make the wifi connection with Ipad in china since it requires user's name and password just like the dialed-up?

The same way you would connect to a secure wifi network in any other country. Supply the username and password when prompted.

Does Magic Mouse work with ipad air?

Does Magic Mouse work with IPad Air?

Yes, it is a Bluetooth device. However, my iPad will not connect to the mouse. Not sure why.
I use my iPad as my personal computer. Mainly for surfing the web, social media, paying bills online... I already have a Bluetooth keyboard that connects to the iPad, so thought it would be nice to have a mouse.

YES! How to make PRINT QUOTAS WORK with 10.4

How to make PRINT QUOTAS WORK in 10.4
After struggling for quite some time, I finally found a pretty simple way to make print quotas work.
First, I’ll tell you our setup. We have 3 different computer centers with a variety of eMacs and new Intel iMacs, all clients are running 10.4.8, and each of those 3 centers has its own HP Laserjet 4200 printer. Our dual G5 server is running Server v.10.4.8. Client computers and printers have static IP addresses. All clients are bound to the server with the standard WorkGroup Manager/ LDAPv3 Directory Access scheme - such that all students login to the clients with their network username/password to mount their home directory on the client.
Next, I’ll tell you what does not work. IF YOU WANT PRINT QUOTAS TO WORK, you cannot use Workgroup Manager to assign a printer to any managed user account, user group, or computer group. Why? Because when you go to a client, and Show Info on the printer that is being pushed by Workgroup Manager, you’ll see that the queue name is not the queue that you’ve setup in Server Admin. Instead, you’ll see the queue name is “MCX” or something along those lines. Even if you manually edit the Workgroup print preference file that is being pushed to clients, it still will not work.
Drawbacks of my technique: In my case, students will see all 3 printers (1 from each lab) available to them no matter which lab they are in. Not the best, but for now I think it’ll be worth it to be able to control wasteful printing. Students may be able to move/delete the preference file (see below), but they’ll only be hurting themselves, as they won’t have any printers at all then.
Okay, here’s how I did it:
1. If you have setup any printers to be pushed out via Workgroup Manager’s preference enforcement to individual users, usergroups, or computer groups, turn those preferences off and leave them off.
2. Delete any existing printers in your Printer Setup Utility and/or Server Admin. Add and setup a new printer queue using the Server Admin> Print service. I added the printer through the Server Admin application, not Printer Setup Utility (may not matter). However, I did go into that latter utility to set the model of the printer. Now, back in Server Admin, edit the printer queue to turn on these services IPP, LPR (bonjour off), and of course check off the enforce quotas box. (No student Windows clients, so I didn’t tinker with SMB print service). I went ahead and specified the standard cover sheet – it will be handy while troubleshooting.
3. In Workgroup Manager, select the users that you want to enforce quotas upon, go to the Printer Quota tab (not the preference pane) and, in my case, I selected All Queues and specified a quota, and clicked Save.
4. Delete all printers that appear in the Printer Setup Utility from each client computer (I know, UGH).
5. For all network users, you need to edit a preference file and put it into each user’s home directory. That file is “com.apple.print.favorites.plist” and as you guessed, it needs to go into the Library> Preferences folder of every one of your network users’ home directories. Now, the content of that file is crucial… what it should show is the name of the queue(s) you created in Server Admin above, and be immediately followed by an “@” and the address of the server that is hosting that queue. For example, my queue’s name is TCStudentQ and the server’s address is student.mydomain.org… so my preference file has this entry: [email protected]. If you have more than one queue, you’ll have more entries. Be sure that the network user has at least Read level access under Group or Others. I’d recommend making the server System account the Owner of the file, and be sure to lock the file so the users can’t easily trash it. If you don’t know how to create this file in the first place, what you can do is go to a client computer, and log into the client with a dummy network account. Then open Printer Setup Utility, and you should see the queue you created in step 2. Add that printer, and then the file will be created in your dummy account’s home directory under Library> Preferences. Now you can use that file to distribute to other user’s folders… but don’t forget that each user needs Read level access.
6. That’s it. Works for me. When they exceed the quota, all that spits out is the cover page. It’d be nice if there was a quota monitor utility on the client side so users can see how many pages they have remaining and when the quota will automatically reset. I plan to start the quota on a Monday morning and go on a weekly duration. Not sure what a good starting point is… perhaps 25 pages every school week.
7. Hey Apple Computer, Inc. Server Developers & Project Managers, I truly hope you’re reading this and can explain why print quotas don’t function as you have documented and advertised. I don’t mean to toot my own horn, but I’ve spent way too much time discovering this workaround, and I know it will help thousands of others with the same problem. I can see where your Print Quota system breaks down, and I think you need to fix these issues or at least document them. Don’t forget to fix serious 10.4 Server bugs before leaving it behind for 10.5 Server – many of us will continue using 10.4 Server for at least another year or two.

David,
Your assumption that I didn't read the documentation is incorrect. I read that 10.4 documentation over and over - followed it to the letter to no avail. Perhaps it was updated in the last few weeks? So, do you have a fully operable printer quota system in conjunction with a managed computer or user group that has a managed printer pushed to the group via Workgroup Manager? I can push a managed printer to a managed group without a problem, but the quotas won't be enforced unless I use the workaround above and cut Workgroup Manager's managed/pushed printer out of the picture.
I know this is a user-to-user forum - however, I'm also aware that Apple tech support often chime in here, so it doesn't hurt to post a message to them in the context of a larger posting about a 'known issue'. I have used the server feedback form... hasn't seemed to me to be very helpful in the past.

Need Help Badly - still unable to make iTunes synch apps with iPad

iTunes 10.1.2, MSWindows. iPad WiFi/3G 64Gb. Cannot get all apps on iTunes to transfer to iPad so cannot restore an app I had to delete on iPad. Number of apps on iTunes doesn't match in quantity. Also, specific apps that are deleted from iPad still show up in iTunes. I download to the iPad from AppStore and then synch them to iTunes. Have read ALL tech bulletins, searched this site, searched other sites, etc. Rest of synching appears to work fine. has been going on for over a month. Similar threads on this site don't appear to have solutions either.
Have tried to drag specific app icon in iTunes to Device iPad, no luck, has circle with slash. I do NOT use automatic synching so the iTunes deleting critical files issue during synch doesn't wipe the iPad. I synch manually by Device iPad right-clicking and synch. Transfer purchases says it works but the new purchases on the iPad don't show up in iTunes. I tried resetting synch history in preferences but synching again didn't act any different. In fact, that first synch didn't act like the warning said it would (will act as if synching for first time).
I am completely at a loss. I love the iPad but it is now physically impossible to keep it synchronized with iTunes.

I am going to be no help, except to say that I have similar issues. iTunes shows apps as loaded on my iPad but those apps are not on the iPad. Problem seems to involve a random selection of apps. I've synched, reset, and tried several ways to delete and reinstall but can't figure out a solution.. Strangely the same missing apps are working fine on my iPhone 4!
I had some trouble with videos not working, which has happened twice, but an iOS restore resolved that issue. I only add that in case the issues are related.
Awaiting a solution with baited breathe! - Blacksquare

How to make Canon printers work with Snow Leopard

Can anyone explain simple language (I'm not technical which is why I chose Apple) how I can get my Canon MP 980 printer/scanner to work with Snow Leopard.
Everything used to work perfectly and I'm beginning to regret the upgrade to Snow Leopard (what other suprises are waiting for me when I'm in a hurry?).
I have other Canon printers in various locations (MP 600, MP 530 and iP90). Will I have similar problems with all of them and, if so, is there a simple way to resolve the issues across the board?
I checked the Canon web-site but was totally confused
Any help truly appreciated.

According to Apples website; they should work. Please see: http://support.apple.com/kb/HT3669#canon
The driver version should be: 10.26.1.0 (or greater)
The above article was modified in December 15th 2009
If after installing the most-up-to-date driver, via the link provided, the issue persists, reset the printing system.
How-to reset the printing system:
http://docs.info.apple.com/article.html?path=Mac/10.6/en/14001.html
Then install the printing driver supplied by Canon on Apples website here:
http://support.apple.com/downloads/CanonPrinter_Drivers_for_Mac_OS_X_v106
If that still does not work, reset the printing system again. Now go to Canon's website and get the driver(s) for mac there.
Canon's website for driver download for the PIXMA MP980:
http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=DownloadDet ailTabAct&fcategoryid=334&modelid=17357
There is the possibility the drivers on canon's website could be newer than apples. The version numbers, size of file to download, and release date all appear to be quite different.
On *apples website*, the driver info stats:
* Version: 2.2
* Post Date: November 16, 2009
* Download ID: DL899
* File Size: 274.59MB
On *canon's website*, the various driver info stats:
File Name and Description Version File Size Date Posted
ICA Driver Ver. 1.3.0m (Mac OS X 10.6)
icaosx130m.dmg
1.3.0m
5.37 MB
01/05/2010
MP980 series CUPS Printer Driver Ver. 10.26.2.0 (Mac OS X 10.5/10.6)
mp980sosxcp102620ea8-2.dmg
10.26.2.0
10.11 MB
12/25/2009
MP980 series Scanner Driver Ver. 14.8.2 (Mac OS X 10.3/10.4/10.5/10.6)
mp980sosxsd1482ea8-2.dmg
14.8.2
23.86 MB
09/01/2009
MP980 series MP Driver Ver.1.0 for Network (Mac OS X 10.6)
mp980sosxns10ea7-3.dmg
1.0
39.56 MB
11/05/2009
MP980 series Printer Driver Ver. 7.13.1 (Mac OS X 10.3/10.4/10.5)
mp980sosxpd7131ea8-2.dmg
7.13.1
7.34 MB
06/15/2009
+I do not own the same printer+, however I would suggest installing some of or all of the following 3 drivers.
If your printing via USB:
MP980 series CUPS Printer Driver Ver. 10.26.2.0 (Mac OS X 10.5/10.6)
If your printing via a Networked Printer:
MP980 series MP Driver Ver.1.0 for Network (Mac OS X 10.6)
If your going to use the scanner:
MP980 series Scanner Driver Ver. 14.8.2 (Mac OS X 10.3/10.4/10.5/10.6)
If you scroll down further, past the 'drivers', that same website from Canon also includes step-by-step guides/manuals for setting up the printer/scanner, both via USB & WiFi.
If the steps above did not resolve the issue, please respond back.
Good Luck!
*The website for the Pixma MP600 (sorry no MP600R listed) is here:
http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&fcategoryid=238&mo delid=13800#DownloadDetailAct
Message was edited by: MacLovin54321

Itunes not working with iPad

ipad is connecting to mac but itunes isn't connecting with ipad. Can't sync.

Simple reboot fixed my problem.

How to make Time Capsule work with L2TP

How do I setup Time capsule to work with an L2TP connection? The technical specification says that it should work with VPN Passthrough options (including L2TP) - but I see no options to select.

Agreeing with Jolly Giant that you don't need anti-virus software to protect your Mac.
You do, of course, need the usual array of security stuff if you're running Windoze, but only on the Windoze side. TM won't back-up a Boot Camp partition, and if you're running via Parallels, vmWare, or the like, you should exclude the virutal machine from TM anyway, and back it up separately via a Windoze app.
If you're worried about passing Windoze viruses between your PC friends, get the (free) ClamXav app (via Google). It's the least intrusive.

Wacom pens that work with iPad air and adobe photoshop touch?

I just saw the newest Wacom pen the Fineline and it's pressure sensitive but the last time I used a wacom pen on a ipad air it detected the pen but pressure sensitivity so is their any other pen including Wacom that I can use on iPad Air with pressure sensitivity works including adobe apps mainly photoshop touch.
Message was edited by: Devin Vanassche

Hi,
have you tried to install it over iTunes? This normally helps.
Thanks,
Ignacio

Does AutoCAD 360 works with iPad Air 16Gb Wifi version perfectly (as in all the instruments in AutoCAD Software) ???

I want specifically to know that does the Software AutoCAD works properly with iPad Air

The reviews are very mixed, but you can read the reviews here and see what you think:
https://itunes.apple.com/en/app/autocad-ws/id393149734?mt=8
I wouldn't expect to do any serious work in AutoCAD on any tablet or other touch-based device. It's not going to be suffficiently precise or efficient for all but the simplest edits, and almost certainly nowhere near as efficient as on a Mac. You can try it and see for yourself, though.
Regards.

Lightning to VGA adapter doesn't work with Ipad Air

I have a Lightning to VGA adapter that I want to use with my Ipad Air and pc screen. When I connect it with my Ipad and the screen, on my ipad the blue bar appears but I don't get anything on my pc screen. I dit the same with my iphone 6 and that works perfect. Any idea what the problem could be?
Both devices has IOS 8.3.
Thanks in advance.

I have a similar problem to blueskoi. I have a lightning to HDMI Connector which no longer works on my iPad Air, however it still works fine on my wife's iPad 4.
The only difference I can find is that her iPad hasn't been updated to IOS 8.3, whereas my iPad Air has.
Is anybody else experiencing the same problem, or am I missing something?
I have done a full settings reset on my Air but that didn't resolve it. I get the blue bar at the top of the screen and my TV Screen flashes, but then no signal appears,
Any help would be most gratefully received.
Regards
Paul

How to tether my iPhone 5 with iPad air?

How can i tether my (iPhone 5 iOS 7.1 latest) to iPad air.
My personal hotspot is disable in my setting i cant click on personal hotspot option.
I am using 3G on iPhone and i want to use that 3G on iPad air wifi model please help me.

You need to check with your carrier to have Personal Hotspot enabled.

How to make my iphone work with itunes on new macbook air?

I previously used a PC which I used to put music on my iphone from itunes however I now have a macbook air and I don't know how to change my iphone so that it now recognises my new computer as the right one. I can use my macbook to sync my phone however if I try to drag music or videos onto it it won't work.
Thanks

An iPhone 5 requires iTunes 10.7 (minimum) which in turn requires OSX 10.6.8 (minimum) which in turn requires an Intel Mac (which you have).
1) Make sure your computer meets Snow Leopard technical specifications - http://support.apple.com/kb/SP575 This mostly means making sure it is an Intel Mac and has at least 1GB RAM (at least 2 GB is recommended). Go to the Apple in the upper left corner of any window to "About This Mac". To check RAM continue to "More Info...". It should say you have at least 1GB of "memory".
2) Buy a Snow Leopard disc from Apple online
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard - USA
http://store.apple.com/uk/product/MC573/mac-os-x-106-snow-leopard - UK
or telephone Apple. In the USA: (800) 676-2775 (contact information for other countries: http://support.apple.com/kb/HE57)
Alternatively you can buy from online retailers but anticipate paying much more than the original price which is the price still charged by Apple
3) Backing up your computer before upgrading is always a good idea.
4) After installing from the DVD, update your Snow Leopard installation using Software Update or manually downloading and installing the Mac OS X 10.6.8 Update Combo v.1.1 - http://support.apple.com/kb/DL1399

Does anyone know how to make WireTap Studio work with Lion?

I installed Lion in August, but I have been so busy that I haven't tried to use some of my applications with it until now. One of my favourite sotware suites, Wire Tap Studio, does not seem to be compatible with Lion. This is more than disappointing; it is such a disappointment that I am prepared to ditch Lion and go back to Snow Leopard, if I knew how. Has anyone had a similar experience, and is there a solution?

I am a bit late to the party . Just discovered that wiretap studio no longer works..Ive regularly upgraded the OS and recently I upgraded to Yosemite and its the first time I've had this issue.
I cant wiretap other than via a mic which results in crappy sound. Apparently Ambrosia are not going to make a fix..
Anyone know of an alternative that can capture sound internally without the use of a mic the way wiretop did. Ive looked at MixPAd... It doesnt capture internal sound as far as I can see and Onedesof Audio recorder came with a Firefox Warning about possible corruption or tampering .
I want to capture good quality sound so I can study the arrangements without background noise filtering in via a mic.

How to make "MXKollection + ADDT" work with php 5.3+

Hello Everyone,
I am back again to this forum after i suffered a lot while trying to use my old website created with "MXKollection" and "ADDT" tools, i have faced a lot of deprecated functions along with the "Registration" + "Login" + "Send Email". Even there is a lot of fixes for other plugins that terminated by Adobe such as: "MX Dynamic Charts" + "MX Site Search" and even more.
** Now for the "MXKollection" and "ADDT" tools please use the following patch:
- Download the patch from here.
** The source of the patch and other useful patches for "MXKollection" and "ADDT" tools can be found here:
- Friends of InterAKT

Jacob,
it worked for QA. They where mentioning the problem with mod_osso configuration in forms90.conf file. This is from their answer on how to change the configuration (guess you know that, but maybe other reading this thread don't)
1. Open %IAS_HOME%\forms90\server\forms90.conf
At then end of file, there is one line for mod_sso
#Forms mod_osso authentication directive #<IfModule mod_osso.c> #<Location
/forms90/f90servlet> # require valid-user # AuthType Basic #</Location>
#</IfModule>
2. User must change the format like this
#Forms mod_osso authentication directive
<IfModule mod_osso.c>
<Location /forms90/f90servlet>
require valid-user
AuthType Basic
</Location>
</IfModule>
3. Restart opmn
4. Run a test form
If you cannot connect even when specifying the userid in the URL in non-SSO mode, the my assumption would be that the tnsnames entry is not working okay. Are you sure that the SQLPlus program you use uses the same tnsnames.ora file of the same home (Forms_BI Home) ? What happens if you specify the connect information in the formsweb.cfg file under the application definitions
[myApp]
userid=username/passw@db
If this still displays the logon screen then obviously there is a configuration problem that needs to be chased down. Let me know if you can establish teh connection from Forms when defining username/passw in the formsweb.cfg file.
Frank

How to make iTunes 64 bit work with iPad Air in win 8.1 64 bit?

Similar Messages

Maybe you are looking for