How to make labels for envelopes, how to make labels for envelopes

I want to make address labels using our Apple computer. What do I need to do this?

I use Labelist by Chronos - OK it will cost you a few dollars but it works and you can create custom label formats so you can have listings like on real telephone directories.

Similar Messages

How can I make a label for my chart that changes dynamically when I drag selection of data to adjacent column?

I have a custom budget using Numbers '08 and have labeled a chart in previous versions of my budget but when I tried to update it for the new year I can't figure out how to make the label change dynamically as I drag the selected area to the adjacent column. I have checked Numbers Help and Tutorial videos as wellas the manual and have not found anything that comes close to helping but as I said I had it on previous versions but obviously don't remember how I did it and unfortuanately it is not a very intuitive feature. Thanks in advance for any help on this.

The linkage appears to be automatic, but when broken, does not reattach itself.
Redoing the chart isn'r a long process, though, unless you've made extensive format changes to it. Here's my process, which started with a headerless table wiht the Month labels in Row 1 (and a Chart that had an "Untitled" label on the category axis, and ended with the table and chart shown below:
Click on any cell in the table to activate it.
Go Table > Add Header Row.
Select the cells containing the month names. Copy.
Select the cells in the same columns of the Header row. Paste.
Select the table. If the Header for the current month is highlighted and the month label is on the table, Stop here. If not (and it probably will not be), continue.
Delete the existing Chart (or drag it aside to use as a colour and style reference)
Unhide any hidden rows used in the Chart.
Select the cells to be charted.
Click the Series orientation control (¡¡¡) to change it. The control will turn 90° and move from the column highlight to the row highlight.
Your table and chart should now resemble the one in the image above. Edit the style as needed and you're done.
Regards,
Barry

How can I change the margin settings in the pages inspector to make them more specific for label templates. I need margins that can be set to hundreths of a centimetre not just tenths.

How can I change the margin settings in the pages inspector to make them more specific for label templates. I need margins that can be set to hundreths of a centimetre not just tenths.

I doubt you need hundreths as you would not even be able to measure that and the printer doesn't hold the paper to those tolerances.
fruhulda is right. Pages accepts higher measure but rounds it in the measure field.
If you want absolute accuarcy you need to set your measures to points. Everything else is being recalculated.
Peter

How can I make the "Music" button on the iPhone say something other than "Music" for it's label?

Hi,
The question is in the post title. I would like to change the icon which says "MUSIC" on the iPhone (formerly used to say "iPod" in the older O.S.'s) to something else. Let's say I want it to say "Audio" instead. Basically, in yet other words, I want to remane this icon to something else.
Is this possible to do? If so, how can I go about it?
Thank you in advance for your help.

You can't.

How to make template for avery dvd labels?

Can one make a template to print avery dvd labels?

You have all your versions wrong.
The current Mac OSX is now v10.9.2.
We have no idea what version of Pages you are talking about or what is happening when you try to open them. Possibly you have Pages '08 files which Pages 5 will not open.
Any older version of Pages should however still be in your Applications/iWork folder.
Peter

How can I make Address Book print labels how I want, or export to Word?

I have found a number of serious problems with Address Book, which unless I can overcome them mean it is entirely useless for me. Almost all are to do with creating mailing labels or envelopes:
1.I can't find any way of defining a sheet format for labels different from those on the pre-defined list. My labels are in 2 columns of 8, on a sheet 12” long by 8” wide, margins 0.5mm top and bottom, and ½” left and right. The labels themselves are 3½” x1½”. Address Book can't do it. It is odd that this is so restrictive, whereas with envelopes one has total flexibility.
2.Although I can define which address I want to print on each label or envelope, I can't find a way of defining which field should be used for the first (name) line. It always consists of the First and Last names as recorded on each card. This is not what I want. For different mailings, I want to use different first lines, as in many cases each card is the address of a family group, the First and Last names simply recording the names of the parents e.g., John and Mary Smith. But for my Christmas mailing I want to print 'The Smith Family', whereas for my charity mailshots I want to print 'Mrs Mary Smith', as she is the charity supporter, not her husband or children.
3.The address layout seems to be fixed, with each element on a separate line. This is not how I want to print, as in some cases it makes for too many lines, particularly on labels. I want to put the zip/post-code on the same line as the county or state, separated by about ½”. But I can't see how to dictate the layout at all. On labels there is a further problem, in that I can't define a vertical and/or horizontal off-set for the text.
4.The Country does not print at all on labels, making the application quite useless for foreign mailings, and I can't find a way of overcoming this. Over half our mailing addresses are affected by this.
5. And another problem really puts the final cherry on the icing of this cake: There is no way I can find of exporting the data from the address book in a format, e.g. a csv file, that I can bring into a word processor where I could do these mailings how I want them. Not only does the box fail to do what I need, it is also locked.
I don't understand why, having set up Address Book on the database principle that one should have have to record each contact only once no matter how many ways one needs to use the data, it seems it has then been implemented in a way that prevents it being used in one of the most obvious ways, to print addresses in a format of the user's choice.
The Applecare adviser tells me the problems I have can't be overcome. Is that right, or is she, and I missing something? Please help.

noondaywitch wrote:
"It's Christmas card time again and the fact that Address Book is useless for this purpose is really frustrating."
While I sympathise with the functionality of Address Book, I'm old-fashioned enough to write my cards and envelopes by hand (shock! horror!) and get quite p***-off to receive bulk-printed stuff.
Just a thought, peeps.
It'd be all too easy to follow that up with a cheapshot making reference to how many Christmas cards you have to send, but I'll rise above that and explain that some of us might want to use this for business contacts and have 300+ cards to address.
It is a shame that the printing feature from Address Book is so close, yet so far from performing this simple task. It is a shame that Pages can run mail merge, but only for one record per page (which is useless for label printing). It is also a shame that MS Word for Mac does proper labels but doesn't recognise Address Book as a datasource.
These things are all a shame because with Apple's software, you rather expect things to "just work", as per their advertising, and when very simple things don't "just work", it difficult not to feel cheated.

How do you type multiple lines on a path? (label for top slope of bottle)

Ill describe the best I can...
I am making a label that will wrap around the top half of a bottle, the part that slopes to the spout. Because of this, the label is actually shaped more like an arch so when it goes onto the bottle, it will look more straight. The top part of the label of course will be a tighter arch than the bottom half. This is part of why its hard to make things look right. I know I can bend a line at the same angle and type on it and it looks right but I have a paragragh I have to do this with, about 5 lines worth. I dont want to have to make a different path line for each one because that would be a nightmare to get each line perfect with each other. Is there a way to do the "type on a path" to work with multiple lines at once?

Scott Falkner wrote:
You can't. Each line of text requires an explicit path. You could draw the top line and the bottom line, then make a three-step blend between the two. Expand the blend then link the paths so that text from path 1 flows to path 2, and so on. In the example below each path is linked to the one below. I only needed to paste text into the top path. I was able to link to each following path by clicking on the red + at the end of the previous path, then clicking on the path below.
You could also design the label flat and use a distortion envelope or Warp effect to bend it. This is how I have done such labels in the past. That method requires more experimentation, but makes edits easier.
That seems to be something that might work out. How do you separate each of the strokes from the blend to make them typable though?

When I try and print off a list of my contacts, it defaults to an envelope. How do I make a list of just the names?

When I try and print off a list of my contacts, it defaults to an envelope style, with all the info. I just want a list of names. How do I do that?

Thanks so much Martin. It took me awhile to figure out that in the print mode, there is an arrow that expands the print dialog box. I've been looking for the print dialog box for awhile, and now that I found it, I could make my list. Thank you SO much!! I can show my computer savvy husband that I learned something new today!!! I'm SO happy!!!

How to make the labels vertical in a horizonal bar chart?

Hi,
I am using CF 9. I have a horizontal bar chart. How can I make the labels on the Y-Axis display horizontally. Right now they are vertical and sort of sideways.
Below is a snipept from my <cfchart>. Everything is working, I just want the labels to display horizontally. How can I do this?
<cfchart
                          format="png"
                          chartheight="310" chartwidth="530" foregroundcolor="##000000"
                          show3d="false"
                          scalefrom="0" scaleto="14"
                          showlegend="no"
                          showxgridlines="yes"
                          showygridlines="no"
                          showborder="no"
                          style="#elementStyle#" >
                          <cfchartseries type="horizontalbar" paintstyle="shade"">
                          </cfchartseries>
</cfchart>
Thanks...

When you open the default New Tab page - about:newtab - which has the Tiles and a Search Bar, the "focus" is in the Search Bar. You could change a hidden setting to have a blank page when you open a new tab if that's what you want - that will have the "focus" in the Location Bar . URL Bar.
Type '''about:config''' in the URL bar and hit Enter.
''Accept the warning''
Search field at the top to filter with this - '''browser.newtab.url'''
Right-click the preference that appears below, and select '''Modify'''.
Insert '''about:blank''' for the new string value.

How to Cut, Label, Save sports clips (40Hours, 500GB, 1080p AVCHD Source) for creating season highlight video in Premiere Elements 13?

Thanks in advance for any suggestions you can provide to help me.
I have filmed all of my son's basketball games this season and we are heading into the playoffs soon. I would like to find an efficient way to cut, label, and save video clips to create a highlight movie for the team banquet.
All video is AVCHD and saved on hard drive. A few games were recorded with a Sony camcorder 1920x1980i30(*.mt2s), the rest with my Canon DSLR1920x1080p30(*.mov). I will have about 35 or 40 hours of video by the end of the season. Probably around half a terabyte.
I own licenses to the following video editors.
Sony Vegas Movie Studio HD Platinum 11.
Adobe Premiere Elements 13 that I just purchased bundled with Photoshop Elements 13.
I struggled with burning AVCHD disks with the Sony software, so did the Adobe trial and everything worked great so I bought it.
I went through one game and clipped the highlights, but can't figure out how to label them, or export them as individual highlight files. I guess I would be OK doing this all in a single project if I knew that it would work, and if I could find a way to label the clips so that I can arrange them without having to preview the clip every time.
I am open to using other tools if they don't cost too much, free would be awesome since I don't do this professionally.
Thanks!

GreatFun,
Yes, while I couldn't spend much time today at work reviewing the link ATR provided, at a high level I like ATR's approach as well, and it definitely is advantageous for that use case and rendering only the final product. My use case is a bit different. My son's high school webcasts each match which I then pull off their Youtube channel (with their permission, of course) and use their camera angles and their play-by-play guys commentary (again, with permission) to augment my video (which are closer to the action and much better quality than theirs, I must say). The kids get a kick out of hearing the play-by-play guy yell their name when the score or make a great play. So that is why I produce my clips separately. To me it is cleaner and I can store them for later use outside PE or any other project.
Anyway, regarding the actual shooting of the video. I've been doing this for awhile and there are two elements that are a must for any soccer shoot: a good solid tripod with fluid panning ability, and height. Getting above the action (like atop bleachers), for the most part, is an advantage most of the time. That is why professional sports are shot from above. While I do like to take a few minutes of every game to get on the sidelines and film at field level (this adds a bit of variety to the finished product, and you can't beat the ambient sounds you get when the players grunt and groan), you just can't capture the flow of the game from that angle.
The purpose of your video will dictate your composition. Are you trying to always focus on one player (one particular forward, back, midfielder or keeper) and get their every move (for the purpose of say, college recruitment purposes), regardless of where the ball or action is? If so, you'll want to stay tight on them, but not too tight - know where the action is and use the rule of thirds here with your subject player always in the left or right most third. Let the action, in this case, the ball, enter from the opposite third your player is in to allow the viewer to see a glimpse of what led up to your subject being engaged with the action. If your subject is a keeper, that is the easiest position to focus on of all. When filming just a keeper, I like to set my tripod up along the touch line about 30 yards from the goal line (again, elevated if possible), compose the shot using thirds again so as to let the viewer see the passing action as the goal is attacked. Its great to get a clip of the keeper making a save, but it can be much more impressive and entertaining to a viewer to see how it all unfolds and the choices the goalie has to make to be in the right position to make the save.
If your intent is to film the action where the ball is, regardless of the player or team that has the ball (like most professional sports coverage), it is much better to cast a wide composition. As you mention, it is difficult to find that sweet spot between being too far out and missing the intimacy, or being too close in and simply giving the viewer a headache as the shots zip around as you try and follow the ball. I've found the sweet spot for me is to shoot always keeping a quarter of the pitch in view. This allows for tight enough composition to keep the viewer engaged with the action, without having to jerk the shot around so much as to make them throw up. Soccer is quite fast paced at the high school level and there is quite a bit of "switching the field", where a wing will lob the ball completely across the width of the field to the opposite wing. If you are in too tight, you'll have to pan very quickly to the receiving side, and if done a lot, will not make for very entertaining viewing. There are other examples of why you shouldn't be too tight, but you get the idea.
I've probably written too long a post as it is for this forum, but I hope I've given you some things to consider on your next shoot.
Good health to you!

I see people from different ages at my work and every month I need to count how many people from each age I've seen that month. How can I do to give the entries to numbers in a single cell and make numbers count them for me?

I see people from different ages at my work and every month I need to count how many people from each age I've seen that month. How can I do to give the entries to numbers in a single cell and make numbers count them for me? The final result would be a spreadsheet telling there were 8 people from 20 to 39 years old, 14 peolple from 40 to 59 and so on...

jpqcampos wrote:
This appears to be an 'input form' using 'Radio Buttons' to select the category. Neither of these features are supported in Numbers '09.
You can input the data on one table and summarize it on a second table, but the input table will continue to hold data for each event.
And by using the Reorganize button, you can hide all but two rows of that table to approximate the appearance and performance of an input form.
Here are the two tables, Data on the left and Summary on the right. Notes below.
The grey-filled columns in both tables are 'working' columns, and may be hidden (as shown in the image below).
Data table:
D1 contains the word "TRUE" (in capital letters). (This row is always shown.)
D2 is empty, or may contain any value except "TRUE" (This row is always hidden under the Reorganize rule.)The rest of Row 2 of this table requires the data shown: a number outside the range to be counted (999), and two checkboxes, both checked.
D3 (and filled down the rest of column D): =AND(OR(B2,C2),NOT(OR(B3,C3)))
The formula returns TRUE only for the first unused row in the table (ie. the first row for which neither checkbox has been checked)
Summary table:
Column A contains labels for the age ranges to be counted.
Column B contains the same information in the form necessary for the formulas in columns C and D. They need a numeric value, and that value must be the largest acceptable value in the range to be counted.
C2 (and filled right to column D, then both filled down to row 5):
=COUNTIFS(Data :: $A,"<="&$B,Data :: B,TRUE)-SUM(C$1:C1)
Two changes from the previous example:
COUNTIFS is used to separate the Native and Foreign counts as well as the age range to be counted.
The amount subtracted from each result is the SUM of the earlier results, and includes the text value in the first cell of the column (which is interpreted by SUM as a zero).
See note below regarding my earlier formula.
When the greyed columns are hidden and the checkbox in the Reorganize pane is checked, the two tables will appear as shown below:
Close the reorganize pane, and the 'data entry form' is ready to use.
To use, enter the age first, then check one of the boxes.
As soon as one box is checked, the row will be hidden, and the next (unused) row will be shown.
Regards,
Barry
Note regarding formula in my earlier post:
The earlier formula will give erroneous results as it subtracts only the count directly above it from its count of persons in the age range 0-n.
In E2 of that table, replace "-E1" with "-SUM(E1:E$1)
Fill down to E8.
Ignore the instructions (in that post) following "Fill down to E8."
B

My iPhone 5 appears to be using too much memory, particularly 7.9GB out of the 32GB labeled "OTHER". Even my iPad Air has only 3.9GB labeled "OTHER". How do I identify what "OTHER" is actually used for and how do I mitigate this?

According to iTunes I am using approximately 20.35GB of the available 27.32GM of memory, leaving about 7GB free. Of the used memory, about 7.9GB is labeled "OTHER". Making the same measurement on my iPad Air, only 3.9GB is labeled "OTHER". Why am I loosing so much memory capacity and what do I do to mitigate this problem?
This is having a significant effect on using my iPhone for recording Video interviews which in some cases constitute two to three hours of video. I need to be able togged the "OTHER" memory space so I can do more than one video recording during a session. Lowering the "OTHER" category to 3.9GB, the same as the iPad Air, would make it possible to record two or in some cases three videos before having to offload them to the MacBook Pro for editing in the evening.

Charliebear88 wrote:
No. He mentions freeing up storage on the iPhone, Mac, and hard drive. I'm looking for just the iPhone, and his suggestion for that is downloading some program.
No, it's not, if you would actually read the linked information like I said. There is plenty of information in this link about how to reduce or eliminate your 'Other' data without using third-party programs or procedures:
http://appducate.com/2013/01/reclaim-other-storage-space-on-ipad-iphone-and-ipod /
• Delete Browser Cache
• Delete Mail account and re-add
• Delete Text Messages
• Empty out the Reading List
• Delete iTunes Backups
• Backup to iCloud instead of iTunes
• Restore as new then restore the backup
• Restore as new, but don't restore backup

How do I print envelopes for everyone in my address book?

How do I print envelopes for everyone in my address book? It seems so simple but after half an hour... no joy!!

I have spent most of the morning in a frustrating search of a way to print labels for my contacts. I have a couple of problems. I want to send every label to a different person at the same address. I have hundreds to do and most of them do not have a mailing address so I tried to do a bulk change of the address ... without manually changing every contact there is no way to do this. I've tried to create a template with a table (10x2) and added merge fields to each of the cells but when I do a mail merge all I get are hundreds of pages with a page dedicated to each contact whereas I want to merge on a cell by cell level, i.e. 20 different contacts on the same page.
How do I do this? I can't find label style that is appropriate and I'm not sure how to create one with 10 by 2 labels per page.
Help!

How to make use of label printing in sap smartforms

Hi Dear,
How to make use of label printing in sap smartforms.. I need to print four records from internal table into sap smart forms. It will
come as four labels.All page should follow the same procedure... How to do...please help me..
Regards,
Nikhil

Hi,
Please go through below link, would be helpfull for you.
[http://help.sap.com/saphelp_nw04/helpdata/EN/6b/54b4b8cbfb11d2998c0000e83dd9fc/frameset.htm]

How to make a envelop distort like in this image

Hey guys I wanted to know how can i make a envelop distort like this image in adobe illustrator CS6. Im running it on Windows 7.

I still believe the originator of the artwork at least tried to keep to the straight and narrow. The crucial question is whether Hunter wishes to (too).
When zooming in as far as possible on the image (so it is 190 mm wide on screen), as far as I can see, the spaces are still constant width and the lettershapes at top and bottom are still straight, especially evident for the TE at the end, so I believe any deviation would be an inaccuracy. The rounding of the basically horizontal segments as in Envelope (or Art Brush) Distort should be clearly visible.
I believe Hunter may be able to make sure by zooming in on the actual artwork, and maybe measuring distances between key Anchor Points, and/or dragging with the Line Tool between them, in the latter case the top of the TE would show the greatest deviance from straightness.

How to make labels for envelopes, how to make labels for envelopes

Similar Messages

Maybe you are looking for