How to make MULTISELECT & SHUTTLE as NULL

Hi,
I am having following 2 items
P1_ITEM1 - multiselect
P1_ITEM2 - shuttle
I am using following to make these 2 items as NULL but it's not working
$x('P1_ITEM1').value = '';
$x('P1_ITEM2').value = '';Thanks,
Deepak

Deepak
What is the source of your items, is their a null option available?
If so, you need to set the items to have the null return value which defaults to '%null%'.
Cheers
Ben

Similar Messages

How to make a Struts message null after used in JSP?

Hi,
In the context of Struts/JSP,
An action class might write error messages by
ActionError msg = new ActionError("msg.request.something");
ActionErrors msgs = new ActionErrors();
msgs.add(ActionErrors.GLOBAL_ERROR,msg);
saveErrors(request,msgs);
This message will produce a popup modal window by the following JSP code:
<logic:messagesPresent>
<html:messages id="error">

<script>javascript:alert('<%=error%>')</script>
</html:messages>
</logic:messagesPresent>
The problem is that this JSP page is shared by serveral actions: when another action invoke this page again, the previous error message will take effect again.
So my question is how to make message null after used once by its author.
Thx.
PY

msgs = null;

How to make blank value as null in table using DQS

Hi
I am using DQS in SSIS. It makes null value from source table as blank in destination table by DQS_NULL feature.
I want to make that null value as 'Null' in the destination table after applying DQS.
How is it possible.
Thanks
Nidhi

Thanks for the reply.
When I am using (Coulmn) == "" ? NULL(DT_WSTR,225) : Coulmn for making blank as null it is working fine.
But it is making null as string, but I don't want to use null as string. As I am using Null in my stored procedure to load sub region data where "country is null".
If I will use above expression of derived column it will make it as string which is not recommended in my case.
Do you have any solution for it.

How to make sqlldr handle mutliple NULL columns

I am using TRAILING NULL COLS in the control file to tell SQL*Loader to treat any relatively positioned columns that are not present in the record as null columns.
But the problem is occuring when there are multiple NULL columns one after the other. In that case SQL*Loader is treating continuous null column as 1 NULL column and then I am getting following message:
ORA-12899: value too large for column
And reason being wrong value is being tried to inserted in wrong column.
How can I stop SQL*Loader from combining multiple and continuous NULL columns and basically to make it treat each of them separately.

I have been able to take care of the issue using the NULLIF attribute. Here is how my control file looks now:
LOAD DATA
INFILE 'tab_sal_ldr.tab'
INSERT INTO TABLE SQL_TAB_LDR
REPLACE
FIELDS TERMINATED BY "\t"
TRAILING NULLCOLS
(COL1 CHAR,
COL2 INTEGER EXTERNAL NULLIF COL2=BLANKS,
COL3 FLOAT EXTERNAL NULLIF COL3=BLANKS,
COL4 DATE EXTERNAL NULLIF COL4=BLANKS)
However it is rejecting the rows having all NULLs. Is it possible to upload rows having all column values as NULL.
Following is the snippet from the log:
2 Rows not loaded because all fields were null.
Edited by: Parag Kalra on May 4, 2010 3:31 AM

How to make WebContextAdapter as Null

String Name = WDWebContextAdapter.getWebContextAdapter().getRequestParameter("firstName");
String Name2 = WDWebContextAdapter.getWebContextAdapter().getRequestParameter("lastName");
Hi
     After passing the parameters above i want to make make the Adapter
     to null again.
     What are the possible ways for that, plz reply asap.
regards
jalandhar

I am navigating through my application based on the contents of the adapter.. But once the WDWEBCONTEXTADAPTER is set, even if i carry out the statement
IWDWebContextAdapter adapter = WDWebContextAdapter.getWebContextAdapter();
adapter.getRequestParameter("Name1");
adapter = null;
It returns the same value previously set by the previous portal navigation which i wont require..
Thats the reason i need to make the initial WDWebContextAdapter.getWebContextAdapter() go null and hence return me no value the second time its being checked..

How to make numbers in message text input fields left aligned?

Hi Friends
I have completed one of my task .but getting result right side of the field.
how to make numbers in message text input fields left aligned?
Thanks
Aravinda

Hi ,
Sorry for late replay i am trying this alos not set that page....
pageContext.forwardImmediatelyToCurrentPage(null, true, null);
and one more that kff field working is fine for ex display any text pled displayed properly and only problem is not set the value and HrSitKeyFlex6 and HrSitKeyFlex7 fields are perfectly get the values but not pront HrSitKeyFlex8 that only my issue....
Regards,
Srini

How to make a JPanel selectable

When extending a JPanel and overriding the paintComponent() method the custom JPanel can not be selected so that it gets for example KeyEvents.
But if I make the new Class extend a JButton it gets of course selected and able to receive for example KeyEvents.
My question is therefore; what does the JButton implement that a JPanel doesn’t so that a JButton gets selectable? Or in other words; how to make a JPanel selectable?
Aleksander.

Try this extended code. Only the first panel added can get the Focus.
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
class Test extends JFrame
public Test()
    setLocation(400,300);
    setDefaultCloseOperation(EXIT_ON_CLOSE);
    JPanel panel1 = new JPanel(new BorderLayout());
    JPanel panel2 = new JPanel(new BorderLayout());
    ImagePanel imgPanel = new ImagePanel();
    panel1.setFocusable(true);
    panel2.setFocusable(true);
    panel1.setPreferredSize(new Dimension(0, 50));
    panel2.setPreferredSize(new Dimension(0, 50));
    panel1.setBorder(BorderFactory.createLineBorder(Color.RED,     4));
    panel2.setBorder(BorderFactory.createLineBorder(Color.CYAN,    4));
    imgPanel.setBorder(BorderFactory.createLineBorder(Color.BLACK, 4));
    panel1.add(new JLabel("Panel 1"), BorderLayout.CENTER);
    panel2.add(new JLabel("Panel 2"), BorderLayout.CENTER);
    getContentPane().add(panel1, BorderLayout.NORTH);
    getContentPane().add(panel2, BorderLayout.SOUTH);
    getContentPane().add(imgPanel, BorderLayout.CENTER);
    pack();
    panel1.addKeyListener(new KeyAdapter(){
        public void keyPressed(KeyEvent ke){
            System.out.println("Panel1");}});
    panel2.addKeyListener(new KeyAdapter(){
        public void keyPressed(KeyEvent ke){
            System.out.println("Panel2");}});
public static void main(String[] args){new Test().setVisible(true);}
class ImagePanel extends JPanel
Image img;
public ImagePanel()
    setFocusable(true);
    setPreferredSize(new Dimension(400,300));
    try{img = javax.imageio.ImageIO.read(new java.net.URL(getClass().getResource("Test.gif"), "Test.gif"));}
    catch(Exception e){/*handled in paintComponent()*/}
    addKeyListener(new KeyAdapter(){
      public void keyPressed(KeyEvent ke){
        System.out.println("ImagePanel");}});
public void paintComponent(Graphics g)
    if(img != null)
      g.drawImage(img, 0,0,this.getWidth(),this.getHeight(),this);
    else
      g.drawString("This space for rent",50,50);
}

How to make arrays or repeat objects in circle?

Hello,
1 - How to make arrays without copying and pasting? Fig-1
2 - how to create objects repeated in circles? Fig-2
Regards and Thanks

1) Patterns
2) One option is Scripting (or Actions).
http://forums.adobe.com/message/3472806#3472806
Edit: That was only for text layers, you could give this a try:
// xonverts to smart object, copies and rotates a layer;
// for photoshop cs5 on mac;
// 2011; use it at your own risk;
#target photoshop
////// filter for checking if entry is numeric and positive, thanks to xbytor //////
posNumberKeystrokeFilter = function() {
          this.text = this.text.replace(",", ".");
          this.text = this.text.replace("-", "");
          if (this.text.match(/[^\-\.\d]/)) {
                    this.text = this.text.replace(/[^\-\.\d]/g, '');
posNumberKeystrokeFilter2 = function() {
          this.text = this.text.replace(",", "");
          this.text = this.text.replace("-", "");
          this.text = this.text.replace(".", "");
          if (this.text.match(/[^\-\.\d]/)) {
                    this.text = this.text.replace(/[^\-\.\d]/g, '');
          if (this.text == "") {this.text = "2"}
          if (this.text == "1") {this.text = "2"}
var theCheck = photoshopCheck();
if (theCheck == true) {
// do the operations;
var myDocument = app.activeDocument;
var myResolution = myDocument.resolution;
var originalUnits = app.preferences.rulerUnits;
app.preferences.rulerUnits = Units.PIXELS;
var dlg = new Window('dialog', "set circle-radius for arrangement", [500,300,840,450]);
// field for radius;
dlg.radius = dlg.add('panel', [15,17,162,67], 'inner radius');
dlg.radius.number = dlg.radius.add('edittext', [12,12,60,32], "30", {multiline:false});
dlg.radius.numberText = dlg.radius.add('statictext', [65,14,320,32], "mm radius ", {multiline:false});
dlg.radius.number.onChange = posNumberKeystrokeFilter;
dlg.radius.number.active = true;
// field for number;
dlg.number = dlg.add('panel', [172,17,325,67], 'number of copies');
dlg.number.value = dlg.number.add('edittext', [12,12,60,32], "30", {multiline:false});
dlg.number.value.onChange = posNumberKeystrokeFilter2;
dlg.number.value.text = "12";
// buttons for ok, and cancel;
dlg.buttons = dlg.add('panel', [15,80,325,130], '');
dlg.buttons.buildBtn = dlg.buttons.add('button', [13,13,145,35], 'OK', {name:'ok'});
dlg.buttons.cancelBtn = dlg.buttons.add('button', [155,13,290,35], 'Cancel', {name:'cancel'});
// show the dialog;
dlg.center();
var myReturn = dlg.show ();
if (myReturn == true) {
// the layer;
          var theLayer = smartify(myDocument.activeLayer);
          app.togglePalettes();
// get layer;
          var theName = myDocument.activeLayer.name;
          var theBounds = theLayer.bounds;
          var theWidth = theBounds[2] - theBounds[0];
          var theHeight = theBounds[3] - theBounds[1];
          var theOriginal = myDocument.activeLayer;
          var theHorCenter = (theBounds[0] + ((theBounds[2] - theBounds[0])/2));
          var theVerCenter = (theBounds[1] + ((theBounds[3] - theBounds[1])/2));
// create layerset;
          var myLayerSet = myDocument.layerSets.add();
          theOriginal.visible = false;
          myLayerSet.name = theName + "_rotation";
// create copies;
          var theNumber = dlg.number.value.text;
          var theLayers = new Array;
          for (var o = 0; o < theNumber; o++) {
                    var theCopy = theLayer.duplicate(myLayerSet, ElementPlacement.PLACEATBEGINNING);
                    theLayers.push(theCopy);
// calculate the radius in pixels;
          var theRadius = Number(dlg.radius.number.text) / 10 * myResolution / 2.54;
          myDocument.selection.deselect();
// get the angle;
          theAngle = 360 / theNumber;
// work through the layers;
          for (var d = 0; d < theNumber; d++) {
                    var thisAngle = theAngle * d ;
                    var theLayer = theLayers[d];
// determine the offset for outer or inner radius;
                    var theMeasure = theRadius + theHeight/2;
//                    var theMeasure = theRadius + theWidth/2;
                    var theHorTarget = Math.cos(radiansOf(thisAngle)) * theMeasure;
                    var theVerTarget = Math.sin(radiansOf(thisAngle)) * theMeasure;
// do the transformations;
                    rotateAndMove(myDocument, theLayer, thisAngle + 90, - theHorCenter + theHorTarget + (myDocument.width / 2), - theVerCenter + theVerTarget + (myDocument.height / 2));
// reset;
app.preferences.rulerUnits = originalUnits;
app.togglePalettes()
////// function to determine if open document is eligible for operations //////
function photoshopCheck () {
var checksOut = true;
if (app.documents.length == 0) {
          alert ("no open document");
          checksOut = false
else {
          if (app.activeDocument.activeLayer.isBackgroundLayer == true) {
                    alert ("please select a non background layer");
                    checksOut = false
          else {}
return checksOut
////// function to smartify if not //////
function smartify (theLayer) {
// make layers smart objects if they are not already;
          if (theLayer.kind != LayerKind.SMARTOBJECT) {
                    myDocument.activeLayer = theLayer;
                    var id557 = charIDToTypeID( "slct" );
                    var desc108 = new ActionDescriptor();
                    var id558 = charIDToTypeID( "null" );
                    var ref77 = new ActionReference();
                    var id559 = charIDToTypeID( "Mn " );
                    var id560 = charIDToTypeID( "MnIt" );
                    var id561 = stringIDToTypeID( "newPlacedLayer" );
                    ref77.putEnumerated( id559, id560, id561 );
                    desc108.putReference( id558, ref77 );
                    executeAction( id557, desc108, DialogModes.NO );
                    return myDocument.activeLayer
          else {return theLayer}
////// radians //////
function radiansOf (theAngle) {
          return theAngle * Math.PI / 180
////// rotate and move //////
function rotateAndMove (myDocument, theLayer, thisAngle, horizontalOffset, verticalOffset) {
// do the transformations;
myDocument.activeLayer = theLayer;
// =======================================================
var idTrnf = charIDToTypeID( "Trnf" );
    var desc3 = new ActionDescriptor();
    var idFTcs = charIDToTypeID( "FTcs" );
    var idQCSt = charIDToTypeID( "QCSt" );
    var idQcsa = charIDToTypeID( "Qcsa" );
    desc3.putEnumerated( idFTcs, idQCSt, idQcsa );
    var idOfst = charIDToTypeID( "Ofst" );
        var desc4 = new ActionDescriptor();
        var idHrzn = charIDToTypeID( "Hrzn" );
        var idPxl = charIDToTypeID( "#Pxl" );
        desc4.putUnitDouble( idHrzn, idPxl, horizontalOffset );
        var idVrtc = charIDToTypeID( "Vrtc" );
        var idPxl = charIDToTypeID( "#Pxl" );
        desc4.putUnitDouble( idVrtc, idPxl, verticalOffset );
    var idOfst = charIDToTypeID( "Ofst" );
    desc3.putObject( idOfst, idOfst, desc4 );
    var idAngl = charIDToTypeID( "Angl" );
    var idAng = charIDToTypeID( "#Ang" );
    desc3.putUnitDouble( idAngl, idAng, Number(thisAngle) );
executeAction( idTrnf, desc3, DialogModes.NO );

How to make a pop up within if else

I'm now making an user interface which will be used to control a remote robot. I want to make it so that when a button is pressed, a window will pop-up and tells the user what the robot is doing. At the moment, I can only make it to show the message in the cmd box. Code is as follow:
class ActionHandler implements java.awt.event.ActionListener
          public void actionPerformed(java.awt.event.ActionEvent event)
               Object object = event.getSource();
               if (object == forwardButton) {
                    System.out.println("Robot moving fordward");
               else if (object == backwardButton) {
                    System.out.println("Robot moving backward");
               else if (object == rotateLeftButton){
                    System.out.println("Robot rotating to its left");
               else if (object == rotateRightButton){
                    System.out.println("Robot rotating to its right");
The only way to make pop-up which I know is this one:
import javax.swing.*;
public class DisplayTextInWindow {
     public static void main(String[] args) {
          // create a String variable
          String messageText = "Hello world";
          // display it in the console window
          System.out.println(messageText);
          // now display it in its own window
          JOptionPane.showMessageDialog( null, messageText );
Which I can put into the code for interface because I can't start another class within an if statement (as far as I know anyway...)
Can anyone please teach me how to make a pop-up within an if else statement?

Which I can put into the code for interface because I can't start another class within an if statement (as far as I know anyway...)yes you can.
if (robotRotating)
    newClass class = new newClass();
    class.methods;
Can anyone please teach me how to make a pop-up within an if else statement?sure
if (robotRotating)
   //i think this part is already answered in the previous post
   javax.swing.JOptionPane.showMessageDialog(null, "your message here", "your title here", JOptionPane.OK_OPTION);
}

How to make a stationery out of .doc or .docx file?

Hi,
I stumbled upon a website that has some nice stationery, in .doc format. and since there few free pre made stationery available for Mail.app, at least to my knowledge, because I think I almost downloaded every free stationery available out there that could be easily found via Google. I decided to download some of these .doc stationeries and try to put them in Mail.app, but first I had to convert them into .html format. so here is what I've already tried and did not work:
first I tried opening them in TextEdit, which supports .doc out of the box, only to find out that the pictures in the documents are gone to thin air. I tried saving it and then opening it with something else like Open Office, but the pictures were permanently gone.
then I tried opening the original documents directly in Open Office, you guessed right If you said they will look screwed, and they were, and tried to save them as html, they were screwed even more.
so I did a bit of research and found out that I could use Google Docs in order to convert the documents, I uploaded them into my Google docs and then tried to open them with it, but found it that Google docs can't handle the pictures (specially background pictures) either. as a result I did more searching to find a document converter and here is what I found:
I found a few online service to convert these documents:
http://www.freefileconvert.com/ was pretty good to convert the files into an .odt format. at first I thought yes I got the solution, now I can simply convert it to html using Open Office, but unfortunately, when I saved the document in html format and checked it in Safari to see how does it look, as If I would have done the same in MS Office with the original format, it looked pretty much screwed .
So I continued to look and I found a few other online services one of them asked me to pay a fee, I skipped to the other one which was http://docx-converter.com/. unfortunately the website wasn't functioning properly I think, at least for me (maybe someone out there has succeeded using it, I don't know.) and it didn't send me anything.
Finally I found http://www.zamzar.com/ that could convert .doc or .docx documents into html, or at least that is what it claims to do so, I tried it, and after I received the file via email, I found out it only contains a bmp image of the document's background. So much for the online conversion services!
But I decided I would give it a last shot using MS Office online, so I opened up my old Windows Live mail and went into my Skydrive, I uploaded the documents and tried saving it as html, but there were no save as html (after all an online copy of MS Office should have some limitations, otherwise few people will be willing to buy a Desktop version) but this didn't made me disappointed, since I already knew, that Neither Office Word can make a clear conversion, so I tried something different, while I was in Safari looking at the document in online MS office, I saved the page as Web Archives, then I opened the file with TextEdit, and after deleting useless links and pictures, I finally managed to get a clear document with everything that supposed to be in it. At this point I only need to know how to make use of this document to create a stationery with this raw file which is in Web Archive format. any ideas?
null

I'm a total idiot! How did I overlook http://www.zamzar.com/ functions? I think I might have mistakenly chosen convert to BMP instead of html. I tried it and the result was very good.
OK I finally found a good solution for this problem, so everyone out there that has the same problem, here is what I did:
1. OK if you have some .doc and .docx file formats and you want to convert them into something like .html or .odt, without having to reedit the code or getting a screwed document, use http://www.freefileconvert.com/ in order to convert them into .odt so they would look as they do in MS office just go to the website and upload your documents then choose .odt, then click convert, after a few moments you will get a link to download your .odt files. you can use and play around with your document in Open Office, I have tested it and it's really good.
2. Or if you want to convert them into .html with a clean code, and all the elements in it, simply go to http://www.zamzar.com/ and then ulpoad your documents, choose .html and enter your email address, you will have your .html files zipped and sent right in your inbox, then you could use Kompozer like me, or any other html editor, to make a template out of it. I tried it and the result was nice, now I have a bunch of nice html files that I can use to make templates and email stationery.

How to make a search button in a view?

Hi experts,
Can anyone tell me how to make a button for a search dialog to search a poste (just like which in ppome) in a view?
Thanks!

Hi,
Create a transaction iview in portal, call the iview in webdynpro.
use this code to open the iview in webdynpro java.
WDPortalNavigation.navigateAbsolute
("ROLES://portal_content/<Complete Path of Iview>",
WDPortalNavigationMode.SHOW_INPLACE,
(String) null,
(String) null,
WDPortalNavigationHistoryMode.NO_HISTORY,
(String) null,
(String) null,
(String) null,
true);
see this http://help.sap.com/saphelp_nw04s/helpdata/en/c3/235a428a1e9041e10000000a1550b0/frameset.htm
Regards,
Naga
Edited by: Naga Raju Meesala on Sep 8, 2008 7:51 PM

How to make a field required in OAFramework

How to make a field required in OAFramework at runtime?? Please explain in detail if possible.
Thanks
Kumar

Get the handle of the bean using the following Code
<BeanType> bean = <BeanType>webBean.findIndexedChildRecursive("<Id of bean>");
if(bean!=null && <condition>)
bean.setRequired(true);
}

How to Make Project Code as Mandatory

Hi ! I Need Project code as mandatory in Po's and Sales Order in Row Level. How to Make that one. Also i have a issue with approved PO's. If some PO got approved is there any option to make amendment and resend for again approval.
Thanks and Regards
Kamal

Hi Kamal.......
Try this below SP for making project Code Mandatory........
For Sales Order:
If @object_type='17' and @transaction_type='A'
BEGIN
If Exists (Select T0.DocEntry from ORDR T0 Inner Join RDR1 T1
On T0.DocEntry=T1.DocEntry
Where T1.Project Is Null
And T0.DocEntry = @list_of_cols_val_tab_del)
BEGIN
Select @error = -1,
@error_message = 'Please select Project'
End
End
For Purchase Order:
If @object_type='22' and @transaction_type='A'
BEGIN
If Exists (Select T0.DocEntry from OPOR T0 Inner Join POR1 T1
On T0.DocEntry=T1.DocEntry
Where T1.Project Is Null
And T0.DocEntry = @list_of_cols_val_tab_del)
BEGIN
Select @error = -1,
@error_message = 'Please select Project'
End
End
If your PO is approved and you want to ammend it then your approver has to reject the PO first and it will come to you and then make edition and send it again......
Regards,
Rahul

How to make windows 7 genuine if it is activated but is not genuine?

Hi friends
I have an problem with my windows 7.2 months ago I have installed and activated my windows 7
and it was genuine. But after a month it shows the message on startup like
This copy of windows is not genuine
But when I saw the prorerties of Computer it says that windows 7 is activated
but when I want to check for updates it shows the message as
You may be a victim of software counterfeiting
and I can't install updates .
Diagnostic Report (1.9.0027.0):
Windows Validation Data-->
Validation Code: 50
Cached Online Validation Code: N/A, hr = 0xc004f012
Windows Product Key: *****-*****-V6MGY-G834Y-Y8QH3
Windows Product Key Hash: rtNFKFPViUJdHAbLucXCF+SK1pA=
Windows Product ID: 00426-321-7001157-70908
Windows Product ID Type: 5
Windows License Type: Retail
Windows OS version: 6.1.7600.2.00010100.0.0.001
ID: {38BB1AD8-47A0-475E-AE2A-F177287F8BDD}(1)
Is Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/A, hr = 0x80070002
Signed By: N/A, hr = 0x80070002
Product Name: Windows 7 Ultimate
Architecture: 0x00000000
Build lab: 7600.win7_gdr.100618-1621
TTS Error:
Validation Diagnostic:
Resolution Status: N/A
Vista WgaER Data-->
ThreatID(s): N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
Windows XP Notifications Data-->
Cached Result: N/A, hr = 0x80070002
File Exists: No
Version: N/A, hr = 0x80070002
WgaTray.exe Signed By: N/A, hr = 0x80070002
WgaLogon.dll Signed By: N/A, hr = 0x80070002
OGA Notifications Data-->
Cached Result: N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
OGAExec.exe Signed By: N/A, hr = 0x80070002
OGAAddin.dll Signed By: N/A, hr = 0x80070002
OGA Data-->
Office Status: 109 N/A
OGA Version: N/A, 0x80070002
Signed By: N/A, hr = 0x80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3
Browser Data-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default Browser: C:\Program Files\Google\Chrome\Application\chrome.exe
Download signed ActiveX controls: Prompt
Download unsigned ActiveX controls: Disabled
Run ActiveX controls and plug-ins: Allowed
Initialize and script ActiveX controls not marked as safe: Disabled
Allow scripting of Internet Explorer Webbrowser control: Disabled
Active scripting: Allowed
Script ActiveX controls marked as safe for scripting: Allowed
File Scan Data-->
File Mismatch: C:\Windows\system32\systemcpl.dll[6.1.7600.16385], Hr = 0x800b0100
File Mismatch: C:\Windows\system32\user32.dll[6.1.7600.16385], Hr = 0x800b0100
Other data-->
Office Details: <GenuineResults><MachineData><UGUID>{38BB1AD8-47A0-475E-AE2A-F177287F8BDD}</UGUID><Version>1.9.0027.0</Version><OS>6.1.7600.2.00010100.0.0.001</OS><Architecture>x32</Architecture><PKey>*****-*****-*****-*****-Y8QH3</PKey><PID>00426-321-7001157-70908</PID><PIDType>5</PIDType><SID>S-1-5-21-2632616291-3724185990-1548790092</SID><SYSTEM><Manufacturer>System
manufacturer</Manufacturer><Model>System Product Name</Model></SYSTEM><BIOS><Manufacturer>American Megatrends Inc.</Manufacturer><Version>0205   </Version><SMBIOSVersion major="2" minor="4"/><Date>20070720000000.000000+000</Date></BIOS><HWID>83B83607018400EC</HWID><UserLCID>0409</UserLCID><SystemLCID>0409</SystemLCID><TimeZone>India
Standard Time(GMT+05:30)</TimeZone><iJoin>0</iJoin><SBID><stat>3</stat><msppid></msppid><name></name><model></model></SBID><OEM><OEMID>DELL </OEMID><OEMTableID>WN09
</OEMTableID></OEM><GANotification/></MachineData><Software><Office><Result>109</Result><Products/><Applications/></Office></Software></GenuineResults>
Spsys.log Content: 0x80070002
Licensing Data-->
C:\Windows\system32\slmgr.vbs(1124, 5) (null): 0xC004F012
Windows Activation Technologies-->
HrOffline: 0x00000000
HrOnline: 0xC004F015
HealthStatus: 0x0000000000000000
Event Time Stamp: 12:19:2010 11:47
ActiveX: Registered, Version: 7.1.7600.16395
Admin Service: Registered, Version: 7.1.7600.16395
HealthStatus Bitmask Output:
HWID Data-->
HWID Hash Current: MAAAAAEABAABAAEAAAABAAAAAQABAAEAnJ9o7YTYWv+qdkjkmJME7eD5XvEwoew7
OEM Activation 1.0 Data-->
N/A
OEM Activation 2.0 Data-->
BIOS valid for OA 2.0: yes
Windows marker version: 0x20001
OEMID and OEMTableID Consistent: yes
BIOS Information:
ACPI Table Name OEMID Value OEMTableID Value
APIC   A_M_I_  OEMAPIC
FACP   A_M_I_  OEMFACP
HPET   A_M_I_  OEMHPET
MCFG   A_M_I_  OEMMCFG
SLIC   DELL   WN09
OEMB   A_M_I_  AMI_OEM
Please send me some solutions for this problem:
How to make windows 7 genuine if it is activated but is not genuine?
Please send me solutions at
[email protected]
Thanks
Dakshak

Diagnostic Report (1.9.0027.0):
Windows Validation Data-->
Validation Code: 50
Cached Online Validation Code: 0xc004c4a2
Windows Product Key: *****-*****-GJY49-VJBQ7-HYRR2
Windows Product Key Hash: W5/6nm6F2UPXrCkY5xUhXb/+21g=
Windows Product ID: 00426-OEM-8992662-00006
Windows Product ID Type: 2
Windows License Type: OEM SLP
Windows OS version: 6.1.7601.2.00010100.1.0.001
ID: {0CCF5533-C044-4067-9F28-CF5C833D5D28}(3)
Is Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/A, hr = 0x80070002
Signed By: N/A, hr = 0x80070002
Product Name: Windows 7 Ultimate
Architecture: 0x00000009
Build lab: 7601.win7sp1_gdr.110622-1506
TTS Error:
Validation Diagnostic:
Resolution Status: N/A
Vista WgaER Data-->
ThreatID(s): N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
Windows XP Notifications Data-->
Cached Result: N/A, hr = 0x80070002
File Exists: No
Version: N/A, hr = 0x80070002
WgaTray.exe Signed By: N/A, hr = 0x80070002
WgaLogon.dll Signed By: N/A, hr = 0x80070002
OGA Notifications Data-->
Cached Result: N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
OGAExec.exe Signed By: N/A, hr = 0x80070002
OGAAddin.dll Signed By: N/A, hr = 0x80070002
OGA Data-->
Office Status: 103 Blocked VLK
Microsoft Office Enterprise 2007 - 103 Blocked VLK
OGA Version: N/A, 0x80070002
Signed By: N/A, hr = 0x80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3
Browser Data-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default Browser: C:\Program Files (x86)\Google\Chrome\Application\chrome.exe
Download signed ActiveX controls: Prompt
Download unsigned ActiveX controls: Disabled
Run ActiveX controls and plug-ins: Allowed
Initialize and script ActiveX controls not marked as safe: Disabled
Allow scripting of Internet Explorer Webbrowser control: Disabled
Active scripting: Allowed
Script ActiveX controls marked as safe for scripting: Allowed
File Scan Data-->
File Mismatch: C:\Windows\system32\wat\watadminsvc.exe[Hr = 0x80070003]
File Mismatch: C:\Windows\system32\wat\npwatweb.dll[Hr = 0x80070003]
File Mismatch: C:\Windows\system32\wat\watux.exe[Hr = 0x80070003]
File Mismatch: C:\Windows\system32\wat\watweb.dll[Hr = 0x80070003]
Other data-->
Office Details: <GenuineResults><MachineData><UGUID>{0CCF5533-C044-4067-9F28-CF5C833D5D28}</UGUID><Version>1.9.0027.0</Version><OS>6.1.7601.2.00010100.1.0.001</OS><Architecture>x64</Architecture><PKey>*****-*****-*****-*****-HYRR2</PKey><PID>00426-OEM-8992662-00006</PID><PIDType>2</PIDType><SID>S-1-5-21-2399280593-193699623-3160228986</SID><SYSTEM><Manufacturer>TOSHIBA</Manufacturer><Model>Satellite
L750-X5317</Model></SYSTEM><BIOS><Manufacturer>INSYDE</Manufacturer><Version>2.20</Version><SMBIOSVersion major="2" minor="7"/><Date>20110713000000.000000+000</Date></BIOS><HWID>CC523707018400FE</HWID><UserLCID>0409</UserLCID><SystemLCID>0409</SystemLCID><TimeZone>India
Standard Time(GMT+05:30)</TimeZone><iJoin>0</iJoin><SBID><stat>3</stat><msppid></msppid><name></name><model></model></SBID><OEM><OEMID>ACRSYS</OEMID><OEMTableID>ACRPRDCT</OEMTableID></OEM><GANotification/></MachineData><Software><Office><Result>103</Result><Products><Product
GUID="{90120000-0030-0000-0000-0000000FF1CE}"><LegitResult>103</LegitResult><Name>Microsoft Office Enterprise 2007</Name><Ver>12</Ver><Val>ACD7202654E586</Val><Hash>fFic3JgCreGGRxyF8uMWB4R4Jcg=</Hash><Pid>89388-707-1528066-65612</Pid><PidType>14</PidType></Product></Products><Applications><App
Id="15" Version="12" Result="103"/><App Id="16" Version="12" Result="103"/><App Id="18" Version="12" Result="103"/><App Id="19" Version="12" Result="103"/><App Id="1A" Version="12" Result="103"/><App Id="1B" Version="12" Result="103"/><App
Id="44" Version="12" Result="103"/><App Id="A1" Version="12" Result="103"/><App Id="BA" Version="12" Result="103"/></Applications></Office></Software></GenuineResults>
Spsys.log Content: 0x80070002
Licensing Data-->
Software licensing service version: 6.1.7601.17514
Name: Windows(R) 7, Ultimate edition
Description: Windows Operating System - Windows(R) 7, OEM_SLP channel
Activation ID: 7cfd4696-69a9-4af7-af36-ff3d12b6b6c8
Application ID: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 00426-00178-926-600006-02-1033-7601.0000-3602011
Installation ID: 009046933085046584525573073645695632936540052790536966
Processor Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
Machine Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
Use License URL: http://go.microsoft.com/fwlink/?LinkID=88341
Product Key Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
Partial Product Key: HYRR2
License Status: Notification
Notification Reason: 0xC004F200 (non-genuine).
Remaining Windows rearm count: 4
Trusted time: 12/26/2011 8:25:15 PM
Windows Activation Technologies-->
HrOffline: 0x00000000
HrOnline: 0x80072EFD
HealthStatus: 0x0000000000000000
Event Time Stamp: 12:25:2011 23:08
ActiveX: Not Registered - 0x80040154
Admin Service: Not Registered - 0x80040154
HealthStatus Bitmask Output:
HWID Data-->
HWID Hash Current: NAAAAAMAAQABAAEAAAACAAAAAwABAAEA6GHETXD3zVB3FrJ6NqRIx6CDnsqot4Z4Jjkucw==
OEM Activation 1.0 Data-->
N/A
OEM Activation 2.0 Data-->
BIOS valid for OA 2.0: yes
Windows marker version: 0x20001
OEMID and OEMTableID Consistent: yes
BIOS Information:
ACPI Table Name OEMID Value
OEMTableID Value
APIC TOSQCI
TOSQCI00
FACP TOSQCI
TOSQCI00
HPET TOSQCI
TOSQCI00
BOOT TOSQCI
TOSQCI00
MCFG TOSQCI
TOSQCI00
WDAT TOSQCI
TOSQCI00
ASF! TOSQCI
TOSQCI00
SLIC ACRSYS
ACRPRDCT
SSDT INSYDE
INSYDE
ASPT TOSQCI
TOSQCI00
SSDT INSYDE
INSYDE
SSDT INSYDE
INSYDE

How to make a Java program that recognises a function of two variables...

How to make a Java program that recognises a function of two variables to assign values to that?
First I will give an example and then do the question.
Ex1.
We have any function, eg.y = x ^ 2 + 1 (read 'y' equals 'x' high to the square), a function of the second degree.
To build the graph of this function attach values to 'x' to find the values of 'y'
And thus mount the pair ordered (x, y) which represents a point on the Cartesian plane.
Assigning values to 'x' 'we can build up a table that gives us the pairs ordered:
We can use any numbers, but arfer interval [-3.3]
X | y = x ^ 2 + 1
-3 | Y = (-3) ^ 2 +1 = 10
-2 | Y = (-2) ^ 2 +1 = 5
-1 | Y = (-1) ^ 2 +1 = 2
0 | y = (0) ^ 2 +1 = 1
1 | y = (1) ^ 2 +1 = 2
2 | y = (2) ^ 2 +1 = 5
3 | y = (3) ^ 2 +1 = 10
We then ordered the pairs:
(-3.10), (-2.5); (-1.2), (0,1), (1,2), (2,5), (3,10)
Tabem that can be represented by a table:
X | y
-3 | Y = 10
-2 | Y = 5
-1 | Y = 2
0 | y = 1
1 | y = 2
2 | y = 5
3 | y = 10
Now I begin to explain my doubts.
See this program:
Ex2
* To change this template, choose Tools | Templates
* And open the template in the editor.
Encontrando_o_valor_de_y package;
* @ Author des Soldat Gottes
Import javax.swing.JOptionPane;
Public class (Main
* @ Param args the command line arguments
Public static void main (String [] args) (
Int x, y;
String x1;
X1 = JOptionPane.showInputDialog ( "We have the function y = x + 1 \ n" +
"Assign a value for 'x',"); / / receives a value for the function y = x + 1
X = Integer.parseInt (x1); / / tranforma String in int
Y = x + 1; / / receives the value of 'x' and calculates' y '
JOptionPane.showMessageDialog (null, "The value of 'y' is: \ t \ t" + y);
/ / Displays the value of 'y'
System.exit (0);
We see that the program receives above a value for 'x' and replaces the function contained in the program, y = x + 1, and so is the value of the variable 'y'.
In: x1 = JOptionPane.showInputDialog ( "We have the function y = x + 1 \ n" +
"Assign a value for 'x',");
The entry is a number and that number is assigned aa ja existing function in the (y = x + 1).
The question is: would it be possible to come to a function?
Ex: the program ask: DIGITE THE FUNCTION?
The USUARIO DIGITARIA A FUNCTION ANY, TYPE: y = x ^ 2 +1
The program would recognize the function and give numerical values to that function as Ex1, at the beginning of this text.
And then to find the values of the x and y launch a table.
It would be possible that?
By invez of entering with a number so that the program sustitua a function ja existing as Ex2, seen above, entering with a function quaquer (type: y = x ^ 2 +1) for the program atribuisse values to that function and then create a table of values as Ex1.
I hope it has been easier to understand my doubts now.
Thank you for your attention!
God bless!

rafaelmenezes wrote:
Thanks for the explanation, could understand what fly said.
But as it applied to a program?
How to create a program that recognizes that the entry coefficients?Are you asking about how to parse out the coefficients from the string "3x^4 + 4x^3 - 8x^2 + 5x^1 + 2x^0"? If you define the format to strictly follow that example, this should get you started:
Strip out the spaces
Split the String on "x^"
That should give you [3, 4+4, 3-8, 2+5, 1+2, 0]
Split each resulting String on "+ | -", preserving the operator as a token so you can apply the correct sign to the coeff.
That should leave you with [3, 4, +, 4, 3, -, 8, 2, +, 5, 1, +, 2, 0]. Every other number is a coeff, the rest are the degrees.
You can strip out the +, since those coeffs are already positive, and strip out the - after negating the following number. This is all assuming that you have to write this yourself. There is no doubt already a library or 5 out there that does this for you.

How to make MULTISELECT & SHUTTLE as NULL

Similar Messages

Maybe you are looking for