How to make one album show up for multiple artists?

I'd like some albums to show up under multiple artists in iTunes in Windows. Say for example "The Basement Tapes" by Bob Dylan and The Band. It would be nice to see this album under both these artists. Or to have "Two Men With the Blues" show up under both Willie Nelson and Wynton Marsalis. Can I do that with iTues? If so I haven't figured out how. It would be nice if using a delimiter such as as comma, slash of semi-colon would signify to iTunes that it should lists those songs under all artists but it doesn't. At least commas didn't work. Any help would be appreciated.

iTunes doesn't have the ability to do what you want, i.e. to define multiple separated values in a field and then have the item show up when looking at a selection based on each of those values. "Bob Dylan", "The Band" and "Bob Dylan & The Band" are three distinct values that can't be linked together. Sort values can change where in a list things are displayed but shouldn't be used to attempt to merge different values as results are undefined and unpredictable.
tt2

Similar Messages

How to maintain One product cost collector for multiple materials and configuration setting

Hi experts,
my requirement is that i want to maintain one product cost collector for multiple materials ans also i want to know the configuration setting for the same.
I have used KKF6N but it is not working in my case. I went through KKF6M also but there i found multiple cost collectors.
please guide me in the same.
Thanks in advance.

Hi Shripad,
you cannot assign same Product cost collector to different material.
Because you creating cost collector for material combination of material /production version,material /Bom Routing.
so please create individual cost collector for every material.
if you have any query kindly revert back.
Please mark the answer as helpful if it is helpful to you.
Because march 5 onwards scn has stopped awarding points to liked content.
Starting now: No more points for likes on comments/replies
Thanks & Regards
Sandeep Kumar Praharaj

How to make one thread to wait for others in this situation?

i am simulating a 2 phase locking system (shared and exclusive locks). multiple clients connects and requests for lock to a single server. at the server end, we have a class Server which implements Runnable interface. for each connection, a new Server object is created and a new thread is started. when a conflicting lock request is made by a client, the corresponding thread in the server end must wait until other threads corresponding to clients holding the lock releases it. and when all the locks in conflicting mode are released, the thread releasing the last conflicting lock must notify the waiting thread.
but the wait() and notifyAll() methods are not working as desired. i guess this is because each thread is working on different Server objects.
how can i implement the waiting and notifying mechanism?

Let me recap your question: your Server is a single resource to which
multiple Clients want access in a CREW (Concurrent Read Exclusive Write)
fashion. You need a single object somewhere that can serve as the
single monitor for locking. A Singleton object like this should do it:public class CREW {
   private static CREW crew= new CREW();
   public static getCREW() { return crew; }
   private boolean wite;
   private int read;
   public synchronized acquireReadLock() {
      // your read locking stuff here
   public synchronized acquireWriteLock() {
      // your write locking stuff here
}... the important part is that there is a single object to lock on. The
'acquire...' methods can be pooped up at will (a Command as a
parameter mayhap?)
kind regards,
Jos

How to manage one wsp and dll for multiple clients in farm environment

1. There is a product which is developed using C sharp , jquery,CSS and sharepoint object models which have been packaged into .wsp file. Whenever we introduce new functionality to the product we used to branch the
previous code as a version , say Version 1.0 and new functionality of the product will in another solution. This is how we are managing the code in TFS as versions. Each newer version will have new functionalities. We do not give latest functionality for all
the clients. Each client is having its own version of functionality. Technically in order to access the functionality, the wsp solution should be present in the solution repository which is available in SharePoint central administrator site. This solution
will be deployed on the client’s site. We are following the above process in SharePoint standalone installation where we used to purchase dedicated server per client and installed sql, SharePoint foundation 2010 as standalone installation and adding the client
related version of the code to the solution repository. Later host on the site which is created for that client purpose. This process is same for all the clients where we purchase individual server for each client .
Now we want to host our product in farm environment of sharepoint foundation 2010 where we are going to try 3 level architecture.
• SQL Server-In this sever we are going to install sql server 2008R2 standard edition. Which should serve the database service for all the web applications/sitecollections which we are going to create in Web front end server.
• Application server- In this server we are going to install the sharepoint as farm and will install search server express for serving search functionality for our product
• Web front end server- In this server we are going to add this server to Sharepoint farm which we have created in application server. Here we are going to create web applications and site collections for all the clients.
In this scenario how to manage multiple versions of same wsp solution?
Another major issue w.r.t the architecture of the product and new approach for client deployment as follow.We have CSS, jquery files for serving the functionality.These files have been mapped to 14 hive folder.If any changes we do one of the jquery file or
css file which is meant for latest version and not for old version, then how to manage this new functionality for that particular css or jquery file in 14 hive folder, since there is only one 14 hive folder. What is the best practice to make this happen? Another
thing is, how to manage dll files for individual client?

It sounds like you have a farm scoped solution at work. In that case you can only have a single instance of it per farm, you'd have to branch each version so they appear to be seperate solutions entirely (thus ruining your clients upgrade process).
Bluntly i don't think a single farm can manage all your user environments.

How to use one pageflow to cater for multiple display?

Hi, I trying to use one pageflow to display different kind of contents because the logic behind the retrieval is similar except that different parameter(string) us passed in for different content retrieval.
How do i achieve the above? thanks in advance :D
Cheers

What do you mean by "display different kind of contents"? do you mean you want to display PDF/HTML/Image based on certain parameters or You are using different media like PC/PDA etc.
In both cases you can redirect to different success page based on your query parameters.
if(param.equals(image))
forward image.jsp
if(param.equals(pdf))
forward pdf.jsp
else
forward html.jsp
Hope it helps

Make an album show in two different artists

I have several albums where the artist of the album is A & Artist B, and then I can have albums from Artist A and others from Artists B and B and C etc, my problem is when I click on the Artist A, it doesnt show my Artists A & Artist B albums because itunes doesnt recognize the ';' in the Album Artist tag. Is there a way to have this kind of feature? How? Or am I doing it the wrong way? Tks

"Jazz;Blues;Country" and it will recognize the 3 of them.
Of course, that is the optimal solution. Sooooo.......
Tell Apple about it.
http://www.apple.com/feedback/itunesapp.html

How to use one pop up window for multiple buttons and input fields?

Hi Experts,
I have created a pop up window that will be opened from multiple buttons in the same view. There are input fields that the data will be populated from a pop up window. How can I set up which button that a pop up window is opened from? I also would like to populate the data from a pop up window to the input field next to a clicked button. There are 6 buttons and 6 input fields that share the same pop up window. I would very appreciate your responses.
Thank you,
Don

Hi,
Try creating 2 context attributes, one in your component controller and the other in the pop-up view. Bind the attribute of pop-up view to the component controller attribute.
In the main view, on click of every button set a unique code in the controller's context which helps you in identifying the button clicked. Since u have created a binding to the pop-up view attribute the value flows from the controller.
In the init method of your pop-up view, check the value of the attribute and based on that display which ever UI elements are required.
Eg:
On Button 1 click set value "B1", Button 2 value "B2" etc. In the init() of pop-up view u can check the values and perform the required operation:
if(("B1").wdContext().currentContextElement().getButtonIdentifier()){
else...{
Hope this helps you.
Regards,
Poojith MV

How to use one dynamic connection managers for multiple parallel data flow tasks

hi there:
I have 6 databases residing on the same server. What I want to do is call a store procedure with identical name on each database dbo schema and transport results to a centralized place. The key is to have those SPs run in parallel instead
of in sequence as each SP may take around 10 mins to finish.
The simplest way is to create 6 OLE DB connection managers and create 6 DFT tasks. However, I do not want to maintain 6 OLE DB connection managers as there is a chance to have more connection managers.
What I did so far is to create a OLD DB connection manager and use expression to set up connectionString properties so that it will get populated by variables at run time. It is fine when running all SPs in a Foreach Loop Container. However, it takes
around 60 mins to finish.
When I try to run it in parallel ( basically created 6 DFTs but use only one Dynamic Connection Manager), the connection string gets confused therefore all DFT tasks failed.
Does anyone here have some experience on this topic?
Thanks
hui
--Currently using Reporting Service 2000; Visual Studio .NET 2003; Visual Source Safe SSIS 2008 SSAS 2008, SVN --

Yes, basically, on the connectionString property of ONE OLEDB, you are using an expression to supply value and this expression is pointing to a variable.
In this case , you can update this variable from a table which contains many connection strings. It's good if you want to execute Store procedures in a sequential order. When in parallel mode, this will cause issues as connectionString gets overwritten.
I am thinking about using script task to exec sp.
The whole idea is that I do not want to maintain a large number of Connection Managers.
Hope it helps
--Currently using Reporting Service 2000; Visual Studio .NET 2003; Visual Source Safe SSIS 2008 SSAS 2008, SVN --
So you are not able to run parallel executions using same conn mgmr, even with dynamic connectionstring, is that correct? Yes, script task will be a way to go if you wish to execute it in parallel, you may connect to SS and query the proper conn string with
SELECT/WHERE clause in each script > pass it to a script variable > use that script variable and execute the proc. This will require only two things to change in each script, the WHERE condition to get the conn string and the proc name (you may even
get the proc names the same way you get conn string) and everything else will be same. Let us know how that goes.
Hope no two or more procs doing insert/update/delete on the same tables.

One Album Showing up In Multiple Ways

When I import certain CD's in iTunes, It will split the CD as two album fronts in CoverFlow view. I change the album artist to the sames on all 14 tracks and it still doesn not work. Can someone help.
Thanks

Check the Sort Artist and Sort Album fields to make sure they're consistent.

How to make more albums in photo library?

How to make more albums in photo library?

If you do not have iOS 5, you have to use subfolders in your one photo syncing folder. You can have one level of folders in the syncing folder and each folder is an album.
With iOS 5 you can create albums in the Photo app.

How to make new item show in ASCP Plan workbench.

Item ATT.BVL3AHY is a new item without any demand. At item master, it is set as Planned so it is collected by ASCP. The item can be found in msc.msc_system_items with Plan_id -1. Plan id -1 corresponds to Collection. Planner needs to manuallty add planned order for this item at ASCP workbench of plan WIRELINE (PLAN_ID 3002) as attached but as the item cannot be found in WIRELINE plan, planner cannot add it. Please let me know how to make this item show in WIRELINE Plan workbench.

Run this query:
select mrp_planning_code from msc_system_items where item_name like '<Item_Name>' and organization_id = <Org id> and plan_id = -1
If this returns 7 you dont need to run any collections.
If this returns other than 7 then,
create a simulation set under Item Attributes Mass Maintenance and then update the attribute MRP Planning method for this item to MRP/MPP Planning. Assign Simulation set to plan name and then rerun the plan. It should work.
If you are still facing an issue, then raise an SR with Oracle.

How to make F7,F8,F10 disabled for security?

Hi alll,
Pls can any boady tell me ; how to make F7,F8,F10 disabled for security purposes?
Abdetu.

Hello Gerd
Thanks for reply,
i made a search for the file u mentioned
FMRWEB; i found it on path C:\orant\FORMS60
having the following :
# FMRWEB.RES is the key definition file for webforms. The syntax is:
# JFN : JMN : URKS : FFN : URFD (whitespace ignored)
# JFN = Java function number
# JMN = Java modifiers number
# URKS = User-readable key sequence (double-quoted)
# FFN = Forms function number
# URFD = User-readable function description (double-quoted)
# JAVA FUNCTION NUMBER
# 33 = PageUp
# 34 = PageDown
# 35 = End
# 36 = Home
# 37 = LeftArrow
# 38 = UpArrow
# 39 = RightArrow
# 40 = DownArrow
# 65 - 90 = Ctrl+A thru Ctrl+Z (These will always have the control
# modifier explicitly included, as well as any other
# modifiers that might be used.)
# 112 - 123 = F1 thru F12
# 9 = Tab (Ctrl+I, without the control modifier)
# 10 = Return (Ctrl+J, without the control modifier)
# JAVA MODIFIERS NUMBER
# Equal to the sum of the values for the modifier keys:
# 0 = None
# 1 = Shift
# 2 = Control
# 4 = Meta
# 8 = Alt
# FORMS FUNCTION NUMBER
# The Forms function numbers match the function numbers found in a
# typical Forms key binding file.
# USER-READABLE STRINGS
# The double-quoted strings appear when users click [Show Keys], and
# are used for this purpose only. These strings can be translated as
# needed. Note that the strings do not affect what actually happens
# when end users press a particular key sequence.
9 : 0 : "Tab" : 1 : "Next Field"
9 : 1 : "Shift+Tab" : 2 : "Previous Field"
116 : 0 : "F5" : 3 : "Clear Field"
38 : 0 : "Up" : 6 : "Up"
40 : 0 : "Down" : 7 : "Down"
33 : 0 : "PageUp" : 12 : "Scroll Up"
34 : 0 : "PageDown" : 13 : "Scroll Down"
69 : 2 : "Ctrl+E" : 22 : "Edit"
10 : 0 : "Return" : 27 : "Return"
76 : 2 : "Ctrl+L" : 29 : "List of Values"
115 : 0 : "F4" : 32 : "Exit"
75 : 2 : "Ctrl+K" : 35 : "Show Keys"
83 : 2 : "Ctrl+S" : 36 : "Commit"
118 : 1 : "Shift+F7" : 61 : "Next Primary Key"
117 : 0 : "F6" : 62 : "Clear Record"
38 : 2 : "Ctrl+Up" : 63 : "Delete Record"
117 : 1 : "Shift+F6" : 64 : "Duplicate Record"
40 : 2 : "Ctrl+Down" : 65 : "Insert Record"
119 : 1 : "Shift+F8" : 66 : "Next Set of Records"
1005 : 0 : "Down" : 67 : "Next Record"
1004 : 0 : "Up" : 68 : "Previous Record"
118 : 0 : "F7" : 69 : "Clear Block"
66 : 2 : "Ctrl+B" : 70 : "Block Menu"
34 : 1 : "Shift+PageDown" : 71 : "Next Block"
33 : 1 : "Shift+PageUp" : 72 : "Previous Block"
116 : 1 : "Shift+F5" : 73 : "Duplicate Field"
119 : 0 : "F8" : 74 : "Clear Form"
122 : 0 : "F11" : 76 : "Enter Query"
122 : 2 : "Ctrl+F11" : 77 : "Execute Query"
69 : 3 : "Shift+Ctrl+E" : 78 : "Display Error"
80 : 2 : "Ctrl+P" : 79 : "Print"
123 : 0 : "F12" : 80 : "Count Query"
85 : 2 : "Ctrl+U" : 81 : "Update Record"
121 : 3 : "Shift+Ctrl+F10" : 82 : "Function 0"
112 : 3 : "Shift+Ctrl+F1" : 83 : "Function 1"
113 : 3 : "Shift+Ctrl+F2" : 84 : "Function 2"
114 : 3 : "Shift+Ctrl+F3" : 85 : "Function 3"
115 : 3 : "Shift+Ctrl+F4" : 86 : "Function 4"
116 : 3 : "Shift+Ctrl+F5" : 87 : "Function 5"
117 : 3 : "Shift+Ctrl+F6" : 88 : "Function 6"
118 : 3 : "Shift+Ctrl+F7" : 89 : "Function 7"
119 : 3 : "Shift+Ctrl+F8" : 90 : "Function 8"
120 : 3 : "Shift+Ctrl+F9" : 91 : "Function 9"
113 : 0 : "F2" : 95 : "List Tab Pages"
72 : 2 : "Ctrl+H" : 30 : "Help"
------------------------------------end of file-----------------------------------------
Now if this is the file i have How can i make F7,F8,F10 disabled for security?
can u clarify to me how can handle this,i am afraid i may do something wrong..!!!
But how do you want to commit without the shortcut?? What do u mean by a shortcut..?
Thanks in advance..
Regards,
Abdetu.

How to make plug ins show up in the filter menu, several Topaz plug ins are in the 13 plug in folder?

How to make plug ins show up in the filter drop down menu, when several Topaz plug ins have been moved from Elements 11 to the plug in folder for Elements 13?

Thank you for your advice. I followed your directions, but came up with the same results. However, I did discover that whenever I open up the iPhoto Library that is already existing on my MacBook a certain set of pictures shows up. But then when I open up the iPhoto Library from the Hard drive another set of pictures shows up. BUT not ALL of my pictures are showing up on the iPhoto Library from the hard drive. At least the last two years of pictures are not showing up?! Actually, it appears that all the pictures are there from when I started using iPhoto about 5 years ago up until around the time that I got my iMac desktop computer and started using that (2 years ago). I have noticed that more recent videos I have made are showing up in a folder on the hard drive, but will not appear when I open up iMovie?! Any ideas on how to access my pictures from the last 2 years off of the hard drive???

How to create one more server node for SAP J2EE server?

Hi,
Can any one please suggest how to create one more server node for SAP J2EE server? I am using WAS700.
Thanks and Regards,
Smriti.

Hai,
Login into the Configtool(C:\usr\sap\SID\DVEBMGS<inst no>\j2ee\configtool) if ABAP+JAVA stack or C:\usr\sap\SID\JC<inst no>\j2ee\configtool) if JAVA stack
click on the instance and and select the addserver button on the top to create a servernode for J2EE server.
Thanks and Regards,

HT5796 I was on a a different Apple ID and I logged out because they didn't want me on there anymore so I figured out how to make one and now it's not letting me upgrade or download anything. I rebooted my iPhone 5, iOS 7.0.4 multiple times nothing fixed

I was on a a different Apple ID and I logged out because they didn't want me on there anymore so I figured out how to make one and now it's not letting me upgrade or download anything. I rebooted my iPhone 5, iOS 7.0.4 multiple times nothing fixed my problem.

I was on a a different Apple ID and I logged out because they didn't want me on there anymore so I figured out how to make one and now it's not letting me upgrade or download anything. I rebooted my iPhone 5, iOS 7.0.4 multiple times nothing fixed my problem.

How to make one album show up for multiple artists?

Similar Messages

Maybe you are looking for