How to make sure text in landscape mode appeared in portrait?, How to make sure text in landscape mode appeared in portrait?

I think a few pictures speak a thousand words. I try to get creative and design some pages in landscape mode.
This is how the TOC looks like in landscape. As you can see there is a chapter and many pages. I didn't use sections to make sure that they don't appeared as a list in TOC page.
This is how Chapter page looks like.
But when viewed in portrait mode. nothing appeared.
How shall I make sure that at least the text in chapter page goes there?
Thanks!

If I add a text box, it does not seem that inline is an option.
When I create the chapter page, the bottom part is empty, but I do not know how to add text. If I add a text box, it is not inline.
I hope to be able to add inline text which appeared at the bottom, possible?

Similar Messages

I have just switched to samsung and i have removed the sim from the iphone however i am still receiving texts rather 'imessage' on the old iphone. how do i make sure all messages only come to my new phone??

i have just switched to samsung and i have removed the sim from the iphone however i am still receiving texts rather 'imessage' on the old iphone. how do i make sure all messages only come to my new phone??

You can turn iMessage off on your iPhone. That's relatively easy. Since iMessage is an Apple product/service, I have no idea how a Samsung phone will deal with an incoming one. For that answer you should probably contact Samsung support.

How do I make sure my iPhone sends a text not an iMessage?

My iPhone seems nowadays to try to send a SMS as an "iMessage" rather than a text. This does not work very well. I have had delays of several hours, and messages delivered to computers at home rather than the phone in the pocket. Also it uses data bandwidth rather than the phone signal without asking my permission. This is a serious shortcoming IMO.
How do I make sure that my text messages actually are text messages.

Just turn off iMessage in Settings

How to make sure Bridge Mode is OFF on my new TC

When I go into Airport Utility for my New TC, Network, Router Mode the choice is OFF(Bridge Mode). Does this mean the Bridge Mode is off?

Alex_Tiny wrote:
I have read through your posted thread and you clearly state that TC, AC version cannot be set up using your method. I have the AC version so it won't work for me.
Eggman worked out in the thread how to do it.. So follow his section.. which is the same but using v6 utility.
So my question is can I just shut down the Bridge Mode, and set all the details so I can udate the TC with the new DNS numbers.
You can put the TC in router mode.. dhcp + nat and try it..
I do not know if it will work but the problem is, you will then have other issues.. so even if the dns is correct other things won't be.
Double NAT is the issue.. so it depends on if you can move the main router to the TC instead of the current router.
Please do try the other method.
Also, it is way too complicated for my inexperienced pea brain. I am retired and pretty much isolated here with very little outside help available.
You have lots of time.. try every method.. just reset if you mess up and start over. You cannot hurt anything.. indeed you can export your current setup in airport utility so you can restore it easily.
Take your time and make up a proper log and try different settings..
I found it hard to change DNS.. what the company refers to as many people with TC and extreme running this setup unfortunately you really have to work from where you are. If your TC shows DHCP + NAT then bridge is off.. and you have full router and you can play to your hearts content with dns settings.
Tell us what the make and model of the modem you have now.
Give us the current dhcp setup of the modem.. ie the range of IP's and DNS settings.

My Firefox currently in offline mode, cannot browse web. How do I make sure Firefox is permitted to access web??? Problem just started 2 days ago.

When I log on my desktop mac, and sign in, a screen pops up which states: "'''''''''Firefox is currently in offline mode and cannot browse the web.'''''''''
Make sure your computer or network is protected by a firewall or proxy, make sure Firefox is permitted to access web"??????
I have to log completely out, Restart my computer, then it will let me get online or browse net.

Did you check the Offline setting in File > Work Offline?

How can I make sure the text size on front panel will be adjusted by itself from PC to PC?

In my VIs under VI Properties -- Window Size, I checked the two boxes:
--Maintain proportions of window for different monitor resolutions
--Scale all objects on front panel as the window resizes
It seems that it worked for everything on front panel except the pure text wording that I put there for instruction purpose. The size of those text stuff didn't get changed proportionally after my application was built and run on different machines so some of them got cut off and looked messy.
Does anyone know how to fix this problem?
Thanks very much!

Hi Andrew,
Thank you for looking at my problem!
Both my development system and test system are Window XP. The font size are all set to Normal. What other details do you need to know?
The text on front panel shows well on my development machine. But when the .exe runs on my test machine, the text size was not adjusted by itself so the text body got cut off.
I found a way to "fix" this problem: I had to drag the text box down and right so there is enough magin between the text body and the box on the right and at the bottom. I had to try it a few times until it finally shows well on my test machine. However, with those magins, it doesn't look nice on my development machine anymore. Also, I only tried on one test machine, if it looks good on one test machine, will it look good on all the other machines? Eventually my app is going to run on Window 7. I'll have to test that out and find out if it's still going to be a problem. Anyway, I don't feel this is the right way to do it. I hope someone knows what I'm talking about and have a soluction to it.
Thanks very much!

How to make words in a text field change color in play mode by clicking on them?

I have a text field on a slide, wanting to change the color of certain words randomly by clicking on them in play mode. I dont know what word in what order will be mentioned by the audience, so I can not set a fixed order in advance.
Any help is appreciated.
Thanks a lot.

create a slide with all the text boxes in place
duplicate the slide as many times as you have text boxes you want to change colour
on the second slide, change the colour of one of the text boxes as required
on the first slide, select one of the text boxes
open the inspector: Inspector > Hyperlink >
enable as hyperlink > link to slide > click slide button > select the correct slide from the drop down menu
in play mode, clicking on the hyperlink will display the appropriate slide with that text changing colour
repeate the process for each text box

A textblock on a Samsung tablet is changing it's width but the rectangel behind stays the original size, how can I make sure the text looks the same as in the muse preview?

The sample site for this would be:
http://www.gdmpro.de/index.html

Hello David,
It wasn't because of the size of the widget, which was correct. The same problem actually also occurred with the tabbed panels, some how the text just floated over the set boundaries from the widgets, which seems to me to be a bug. The solution for this problem was to change one of the characters of the text in the font size. I just increase a period one point and than the text filled the correct size of the text field.
You can see at:
http://www.gdmpro.de/tablet/leistungen.html
It would be great if this could be fixed for future releases. It is very impotent to me and my costumers that websites appear correct over any kind of device.

If I expand a web page using Control +, how can I make sure the next page I go to on that site will also be in expanded mode, and the 1st page will still be in expanded mode when I come back to it? This is automatic in Chrome browser.

Right now the pages always revert to small size. It's a hassle having to expand them every time to make them readable for my vision-impaired eyes.

Try the [https://addons.mozilla.org/en-US/firefox/addon/2592/ NoSquint] add-on, it gives greater control over the zoom options.

How do I make the pages larger with firefox? I like to use this but text is was to small. So I always go back to internet explorer. HELP

I don't have any tool space on the top of the page. only home and favorites google too. I also don't have to bottom where I can press to get to my programs. I do like firefox. But the text is way to small. How do I fix these things?

Make sure that you do not run Firefox in full screen mode (press F11 or Fn + F11 to toggle; Mac: Command+Shift+F).
*https://support.mozilla.org/kb/how-to-use-full-screen
If you are in full screen mode then hover the mouse to the top to make the Navigation Toolbar and Tab bar appear.
Click the Maximize button (top right corner of the Navigation Toolbar) to leave full screen mode or right-click empty space on a toolbar and choose "Exit Full Screen Mode" or press the F11 key.
You can use an extension to set a default font size and page zoom on web pages.
*Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
*NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/
*http://kb.mozillazine.org/Zoom_text_of_web_pages

How to make text messages pop up on screen?

Hi...
I used to have an iphone (sorry for swearing), and I used to love how text messages would pop up on the screen when the phone was in 'sleep' mode.
Is there any way I can get my Z2 to do this?
Thanks...

Hi Sherratthead,
Welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.,
You could also Try Handcent, this allows a POP up window that also acts as a Messenger window.
https://play.google.com/store/apps/details?id=com.handcent.nextsms&hl=en
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

How to go into Landscape mode?

Hi,
I recently purchased an Alcatel OneTouch Fire C and was trying to watch videos on itbut i couldn't figure out how to watch videos in landscape mode in it. Can anyone help me with this?

Hi!
Try this:
Launch the Settings app from the home screen. Then, tap "Display". Make sure "Lock orientation" is disabled.
You should be able to view movies in landscape mode in the Video app or the Browser by rotating your phone.
I hope that helps you!

How can I get my iPhone out of landscape mode and back to portrait?

How can I get my iPhone out of landscape mode and back to portrait? Tilting the phone doesn't work.

Try following - 1 by 1:-
* make sure portrait lock is not on & try turning on/off several times
* turn off mobile and turned it back on
* hard reset by pressing lock and home at same time
If problem persist, you need to try following but be careful since the following impact your iphone.
* resetting all setting: this will reset all settings of your iphone back to factory setting
* resetting all setting by erasing all data: this will reset all setting and erase all data so do back-up and proper syncing and read relevant details
* restoring from itunes: this will also erase all data and take mobile back to day 1
last 3 options are last resort and only be done if you are sure you can restore your data.
Please don't hold me responsible for any data loss while doing last 3 options
Cheers!

Auto orientation only in landscape modes, text centering when typing

Hi,
I have two problems:
1. I don't want to rotate my app when device is in portrait position, only flip it horizontal when it is rotated to another landscape position
2. Text is not centered when typing into input textfield with centered text (but it is ok after confirming).
Any help would be very appreciated!
Thanks!

I've had to solve this problem (#1), and there are many aspects and difficulties to it. I wrote up a long email about the problem, which I'll paste here. Hope you can follow along!:
I’ve wanted to do autorotate landscape only, and thought that I only had the choice of either autorotate to all four orientations, or no autorotate at all, but I just looked into it, and through reading three different topics here, I managed to do achieve everything I wanted. So I’ll write it up here in case someone else doesn’t have as much luck searching through the old messages.
In my particular case I have two reasons to want to be landscape: 1. The design is a landscape one, and not one that can easily be rearranged into a portrait mode. 2. We have gameplay that involves tilting the device, and although it’s fine tuned to work in a narrow range of tilting, people keep on tilting so much that the portrait mode kicks in. With the right kind of game, you could really lose your marbles when that happens!
Those problems can be solved by not autorotating, and finding a way to force landscape. But then that runs into another issue. If it worked that way, an iPad version would be rejected by Apple.
There are several problems to solve (which I think also apply to Android):
Autorotate without allowing normal or upside down portrait.
Make it be landscape from the start even if the user is holding it in portrait as they open the app (setting that in publishing doesn’t achieve the goal).
Allow someone to change their mind about which landscape they want to use.
Here’s the way to solve the first issue:
stage.addEventListener(StageOrientationEvent.ORIENTATION_CHANGING, orientationChangeListener);
function orientationChangeListener(e:StageOrientationEvent) {
if (e.afterOrientation=="default"||e.afterOrientation=="upsideDown") {
e.preventDefault();
Once you’re in normal landscape, you can only be in normal landscape or upside down landscape. The Portraits are prevented from happening, because StageOrientationEvent.ORIENTATION_CHANGING happens before the autorotate kicks in.
Making it be landscape from the start can be done like this:
stage.setOrientation(StageOrientation.ROTATED_RIGHT);
but that would only work well for the majority. People who like to hold the device in the upside down landscape would be frustrated. So that can be taken care of by looking at which way the device is at the time the app is opened. Also, as it may initially be in Portrait (because the user doesn’t yet know that your app is landscape designed), you have to decide with landscape to give them. I reason that giving them the normal landscape would be the safer bet. That all comes out as these lines:
var startOrientation:String=stage.orientation;
if (startOrientation=="default"||startOrientation=="upsideDown") {
stage.setOrientation(StageOrientation.ROTATED_RIGHT);
} else {
stage.setOrientation(startOrientation);
That’s nearly all the problems solved, but there’s one last one, which I’ll log a bug about (once there is an iPhone beta again). If you open the app in rotatedright and then change your mind to want to use it as rotatedleft, the autorotate works wonderfully. Unfortunately, if you start in rotatedleft and then want to use rotatedright, the autorotate does not work, no matter how many contortions you do. You have to quit the app and hold it in portrait or rotateright from the start.
This turns out to be easily worked around, by doing the counterintuitive step of setting Portrait in publishing settings. Then when you tell it to be one of the landscapes by doing stage.setOrientation, the app can tell that going from rotatedleft to rotateright is a change of rotation, because it already got kick started with a change away from the default setting of Portrait.

How to provide a LINK on normal TEXT field in read only mode

Hi,
I have a TEXT item and that is used for only url purpose.
so a user can enter something like http://www.abc.com in that field.
So when I am in read only mode for that item, I want a link also on that text..
how can I do that.
thanks,
Deepak

You could create a pl/sql expression computation on the TEXT item which will convert the value shown for the field to be a HTML link
'<a href="http:// ' || :PXX_TEXT || '">' || :pXX_TEXT || '</A>';Make the computation conditional using the same condition as is used to render the item as read-only
varad

How to make sure text in landscape mode appeared in portrait?, How to make sure text in landscape mode appeared in portrait?

Similar Messages

Maybe you are looking for