How to make the print bigger when reading a book

HHow do I ma

Tap the screen. Tape the two A's in the upper right corner. In the window that opens tap the big A.

Similar Messages

Newsstand app how to make the print larger

Hi - I have download a magazine however how do I make the print larger. I am not finding the option.

It sounds like you'd be fine if you just separated the print function from your "Yes" button. It will require a 2nd button click from the user but that would be the only inconvenience.

How to make the page expired when user click back

how to make the page as expired when i click back button on the browser.
i want a better way.
actually i have a timer.when it reaches 00.00 then the expired page will be called automaticlly using location.href="expired.jsp" then if the user clicks back it should not show the previous page.this concept is applied with paging concept
response.setheader is not working ...
i have redirect when click back using
<body onunload>....i call another page here.
but it is not a good way.
so pls help me to solve this problem
using session or another good way

Use this instead.
Frame.setDefaultCloseOperation(javax.swing.WindowConstants.DO_NOTHING_ON_CLOSE);

How to make the Printer deskjet 3940 compatible with Windows 7, home basic, 32 bits?

I have HP Deskjet 3940 Printer. I recently purchased a Lenovo desktop( C320, 57-302429) which has Windows 7,home basic,32 bits operating system. The said printer does not work with the above computer. Please guide how to make this printer compatible with the above operating system.
This question was solved.
View Solution.

1. Click the Start button, click Control Panel and double click Devices and Printers.
2. Click Add a Printer.
3. Select Add a local printer.
4. Choose an existing USBx Local port, click Next.
5. Click the Windows Update button.
6. After the update finishes, search for the 3940 driver.
7. click Next,Next,Next,Next,Finish
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

How to make the print command wait until form is rendered.

This is an ongoing issue that so far I haven't been able to figure out how to fix, so I'm hoping that someone will have a good idea or work around. I'm working in LiveCycle Designer ES v8. using JavaScript.
I have to include a feature that allows the user the choice to print out a dynamic form to fill out by hand. So I've created a button that asks if this is what they want to do, if they answer "Yes", then several things are scripted to happen. All data is reset, some subforms and pages are made visible, while other subforms are hidden, and text fields are expanded. This causes the form to expand from one page to 15 pages. Then it prints using this command:
xfa.host.print(1,
"0", (xfa.host.numPages -1).toString(), 0, 1, 0, 0, 0);
The problem is that when the print dialogue box appears, the Print Range is always set to less than the total number of pages. It looks like that the print commands fires before the form has completed rendering. This isn't a big deal since the user can click to set the Print Range to "All" which will print all 15 pages. The problem is that most people don't read the dialogue box. They click "okay" and end up with their form cut off. Then I get phone calls that my form doesn't work.
Is there anyway to delay the print command until everything has finished rendering? Or set the Print Range to always go to "All"?
Thanks in advance for your help with this.

It sounds like you'd be fine if you just separated the print function from your "Yes" button. It will require a 2nd button click from the user but that would be the only inconvenience.

How to skip the '\n' char when reading with BufferedReader

Hello to all the comunity that is at these forums, ;)
I'm a venezuelan IT student, and as many arround here, I'm looking for some help with this homework...
well the thing is that I need to read from the System.in untill I get the "" String. Well the initial idea was to make a BufferedReader object and put the br.readLine(); method inside a recursive method, like this:
   import java.io.*;
    public class P1_diccionary {
      String[] diccionario;
      int cont=0;
       void llenarDiccionario(String linea, String[] auxi)throws IOException{
         if(linea.compareTo("")!=0){
             int aux = cont++;
             diccionario = new String[cont];
             for(int i=0;i<auxi.length;i++)
                 diccionario=auxi[i];
diccionario[aux]=linea;
BufferedReader reader = new BufferedReader(new InputStreamReader(System.in));
llenarDiccionario(reader.readLine(),diccionario);
well, I think this one it's a nice idea, however, it doesn't work for me because the input is going to be just like this:
word1: concept1...
word2: concept2...
word3: concept3...
word4: concept4...
and! it's going to be pasted on the console (that is "ctrl+c" then "ctrl+v")... that's the real problem that I have, the method that I did reads some lines not all of them, I think it's because there is no synchronization (guessing) between the ctrl+v and the execution of the program...
so I thought about skiping the '\n' char, to do this I checked the readLine() method of the BufferedReader and found out that it calls a
readLine(boolean ignoreLF)method and that ignoreLF and skipLF -boolean form the class- determine whether readLine() will skip the '\n' char or not:
boolean omitLF = ignoreLF || skipLF;ok now the question: how do I make ignoreLF or skipLF = true? I tried to look more in the BufferedReader class but I didn't see how to change the skipLF value...
well guess that's all, I'll really apriciate all of your help, and any other ideas that you might have to solve the problem...
well thanks to everybody and see ya ;)

Use read() instead of readLine(). This method will read characters, and does not treat the EOL charactger the same way. Just keep reading until you find a sequence of characters (two EOL sequences in a row) that matches your end condition. Just be careful, since different OSs have different EOL sequences ... \n, \n\r, or \r. Also, remember that you will have to deal with the EOL sequences. They will not be discarded automatically.
You can also use read( char[], int, int) to read as many characters as you want, without regard to EOL sequences. This will only stop reading when EOF is reached, or when the next read will cause the underlying stream to block, or when you have read a specified number of characters. Again, this will not terminate at a EOL sequence, and will include the EOL sequences in your array.
As far as readLine() is concerned, I think you want to stop when you have TWO successive reads that equal "".
� {�

How to make the print, email button work in PDF output

Hello,
I'm using LC Designer ES2 to create a xdp form with print, email and httpSubmit button. Then using LC server to generatePDF output, binding with xml dynamically. But after that I got the static pdf file and none of the button work,
I really need help on how to make it work. Any configuration, plug-in....
Thanks,

Hi,
This is solved by note 1281208.
Thanks,
Edited by: Zhijie Kong on May 24, 2011 6:06 PM

I can't figure out how to make the print on webpages bigger. Right now firefox is making it very small. Not having this issue with internet explorer, so I know it's just firefox

I'm on my company website and all of the content appears much smaller than usual. I can't find Tools to adjust the appearance. I check on Internet Explorer and the same website looks normal.

Reset the page zoom on pages that cause problems: <b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
* http://kb.mozillazine.org/Zoom_text_of_web_pages
You can use one of these extensions to set a default font size and page zoom on web pages:
* Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
* NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/

How to make the smallest increment when moving an object

Hello all.
I'm working in a file zoomed fully to 6400%. I've changed the Keyboard increment to the smallest it will allow to 0.0036 mm.
I have two lines. Line 2 sits on line 1, a fraction above. When I select line 2 and press the down arrow key, it jumps so that line 2 is now a fraction below line one. I cannot get the lines to sit perfectly onto of one another.
I have tried to move the line using the mouse, but it snaps to the same position as the keyboard press.
I have turn off snap to grid, snap to point, all the guides, smart guides.
Has anybody come across this problem? Any boady know how to fix this?
Kind regards
James

thomo,
You should be able to snap if you use Smart Guides (alone) and move Line 2 with the mouse/stylus.

How to use the readLine() method when reading data from a URL?

Hello,
I have a URL which contains text input.
The only way to get the data from this URL is by opening a URL connection to it.
I would like to get the data from this URL but at the same time I would like to be able to use readLine() method of BufferedReader in order to read the data line by line.
My question is how do I combine between these two requirements in order to reed the data from the URL?
Roy

Hello Roy,
can you try out this code.
URL yahoo = new URL("http://www.yahoo.com/");
        URLConnection yc = yahoo.openConnection();
        BufferedReader in = new BufferedReader(
                                new InputStreamReader(
                                yc.getInputStream()));
        String inputLine;
        while ((inputLine = in.readLine()) != null)
            System.out.println(inputLine);
        in.close();
Regards,
Mohan R

How to make the pointer work when clicking?

Hi,
I have purchased a new Macbook Pro and am at set up stage yet. I can't go further because the pointer is not working when I am clicking. I can't click on "Start using Mac OS X Lion." I have become so frustrated now! Please let me know if I can fix it or I have to return it to apple centre for fixing.
Cheers,
Mehrshaad

Press the 'tab' key on your keyboard a couple of times. You should see the blue highlight/focus move between options. When its on the option you want, hit the spacebar.
There may be something wrong with your trackpad. Try pressing down quite hard in the bottom left corner. It it takes an unreasonable amount of force, take it back to the shop to have it cleaned or replaced.
I had exactly this problem from new (in 2009) and never bothered to get it fixed because I mostly use 'tap to click'
 > System Preferences > Trackpad | One Finger - tap to click
but it is an PITA in installation and recovery mode where that gesture is off by default.

How to make the icons bigger in windows 8.1 64bit?

i'm the new user of cs6.
when I open the AI or photoshop, the icons are too small in left and right side.
i tried to change the revolution but it still nothing change.
anyone can help me?

You are using a High Resolution display. Support for such displays are in Photoshop CC 2014 Windows where the UI size can be increased by 200%.
As of now nothing can be done for CS6.
Gene

How to make the session expire when the refresh button is clicked

Hi All,
I am writing a Struts application where I want the session to expire when the user clicks refresh button or refresh the page by hitting F5, like any Bank sites. Any help will be appreciated.

The trick isn't invalidating the session. The trick is detecting refresh requests.
The Synchronizer Token pattern can handle this.
Struts can do this for you. Check out [this article|http://www.javaworld.com/javaworld/javatips/jw-javatip136.html?page=1]
Cheers,
evnafets

How to make the life easier when sound file may be changed in future?

Hello, friends,
I have about 600 sound files (total about 10MB), which will
be used by thousands of .swf files. Each .swf file may use only a
few of those 600 sound files.
I know I can load those sound files into each .swf as needed.
However, since those sound files may be changed or modified in
future, I may have to modified each .swf file to reload the
new/modified sound file then. This would be VERY painful.
Any better methods? Any sample source code or reference
papers?
Thanks a lot for your help.

The obviuos solution would be that you just replace the old
(say) "crash.mp3" with the new "crash.mp3" and that's it.
The more sophisticated way would be to store someting in xml
like

Is there a way to hide the status bar when reading a book in iBooks?

Every other ereader app seems to hide the status bar (at the top of the screen, with battery etc) automatically, or there is a setting to do so. I can't seem to be able to do this in iBooks. What am I missing?

Nothing - afaik iBook can't do that trick

How to make the print bigger when reading a book

Similar Messages

Maybe you are looking for