How to Manually Push the records in LBWQ to RSA 7

Hello Guys,
In my ECC Production box LBWQ has MCEX 02, MCEX 04,MCEX 11has got some entries and these are getting reflected in RSA 7. How do I get these to RSA 7 and BI production system subsequently.
Thanks
Vamsi

Hello Guys,
In my ECC Production box LBWQ has MCEX 02, MCEX 04,MCEX 11has got some entries and these are not getting reflected in RSA 7. How do I get these to RSA 7 and BI production system subsequently.
Tried with Collective Job Run as well but of no use. Seems ECC was installed with some patches without locking the BI system.
Thanks
Vamsi

Similar Messages

  • How can I reduce the recording time of the webcam?

    How can I reduce the recording time of the webcam?
    thanks
    Alex

    Keep in mind that Logic also has a limit of 8550 quarter notes. So changing the time signature to 4/8 can get longer recording times. So make sure you change this setting along with the song end. See page 93 in the reference manual.
    MBP 1.83 & MDD 1G DP   Mac OS X (10.4.7)   Logic Pro 7.2.2, Motu 828MkII+828, Firebox LC&XT, Tranzport, Unitor8+(3x)AMT-8's

  • How Do I set the "Record" settings in Sound booth.

    How Do I set the "Record" bit settings in Sound Booth, i.e. the 16 bit rate so that the wav files will burn to a music CD. (the default 48 will dot burn to a CD).
    Thanks Marv.

    Why not post in the SB forum?
    Go to File/Record and set the format to what you need:

  • How could you map the Records of OM- PA

    Hello Experts,
    How could you map the Records of OM->PA ,if the designation of person changes from manager to supervisor from certain date.and how can we see the changed records??
    Solution :we can see the changes in the addition action infotype 302,personel hiring action(0000) delimit the record whenerver we changes the designation,and in the orgassingment infotype overview ,action infotype over view we can see the changes and PLOGI-ORGA IS the integration switch and position is the key for map the recoed from OM ->PA
    Post your comments if the solution is correct???
    Regards
    Chandra

    Thanks  a Lot!!!!
    Regards
    Chandra

  • How can I numbered the records in the report

    Hi, can anyone please show me how do I number the records in the reports in the Report Builder?
    Thank you.

    Hi,
    Follow the following steps:
    1. Create a summary column in the data model of the report.
    2. Select the function as Count.
    3. Select the source for which you want to generate the serial no.
    4.Reset the column at Report level.
    5. Now create a field in the paper layout of the report and select this summary column as the source. The field should be in the same repeating frame as its source.
    This will generate the nos. as reqd.
    Swati

  • How can we lock the table?? how can we lock the record

    Hi
    how can we lock the complete table?? how can we lock the record ?/
    Thanks
    Rama

    Lock objects are used to lock the database table while making the modifications on the database table.
    you can create your own lock objects using SE11.
    if you create lock objects on any table system will create two function modules.
    1.ENQUEUE....
    2.DEQUEUE.....
    first one is used to lock the table
    second one used to removing lock on the table.
    lock Table
    CALL FUNCTION 'ENQUEUE_E_TABLE'
    EXPORTING
    tabname = table_name
    EXCEPTIONS
    foreign_lock = 1
    system_failure = 2
    OTHERS = 3.
    Unlock Table
    CALL FUNCTION 'DEQUEUE_E_TABLE'
    EXPORTING
    tabname = table_name
    check this link :
    http://help.sap.com/saphelp_40b/helpdata/en/cf/21eea5446011d189700000e8322d00/content.htm
    _SCOPE = 1: The lock is not sent to the update program. The lock is removed when the transaction is ended.
    _SCOPE = 2: The lock is sent to the update program. The update program is responsible for removing the lock. The dialog program which requested the lock no longer has an influence on the lock behavior. This is the standard setting for the ENQUEUE function module.
    _SCOPE = 3: The lock
    Re: lock objects
    Reward if this helps.

  • How to update all the record for a particular column in a table based on search criteria.

    Hi All,
    I am new to ADF. I have a requirement, where i have to perform mass update on a table.
    Scenario:
    Ex: I have a dept manual search region. where i search with deptId: 20. I get 20 records in my table. now i have  another region where i have a inputchoice list which contains all the columns names that exists in dept table. Beside that i have a input text box and an update button
    Now user, first searches with dept id:20 and clicks on search button, where it shows 20 record in the table. He then select a column from input choicelist(ex: ManagerId), then enters new value in the input box(ex: abc) then clicks on update button.
    Now i want, all the records in the ManagerId column with dept id:20 to be updated with the new value "abc"
    Can anyone help me with the code.
    Thanks in advance..

    Hi,
    If you go to your VO and generate the ViewObjectImpl, in there you can create a method which will contain two parameters, 1 the attribute name and 2 the value.
    Then you can follow something like explained in this post:
    ADF Tutorial: How to apply bulk actions to a view object rows
    The only difference is that you will need to create a method like this:
    public void updateAttribute(String attribute, Integer value){
            RowSetIterator iter = createRowSetIterator(null);
            while (iter.hasNext()){
                Row row = iter.next();
                row.setAttribute(attribute, value);
    Then you expose that as a client interface and then after you filter your table by your criteria you just need to execute this method passing the right parameters.
    Regards

  • How to fetch all the records

    Hello everybody,
    I am currently working on SQL Developer for the couple of weeks. I have specific need to check, how much time one query take to fetch all the records. Currently it can fetch only 50 records and when scroll then next 50 records and so on.
    Can anybody tell me, how to set this to fetch full records
    Regards,
    Martand M Joshi

    Martand,
    There's no setting to fetch all records. You wouldn't like SQL Developer to fetch for minutes on big tables anyway.
    If, for 1 specific table, you want to fetch all records, you can do Control-End in the results pane to go to the last record. You could time the fetching time yourself, but that will vary on the network speed and congestion, the program (SQL*Plus will be quicker than SQL Dev because it's more simple), etc.
    Now, what I think you really want here, is getting the execution time. If you really want to analyze the query's performance, you'd have to use the explain plan, autotrace and tkprof (see the manual for tuning and performance).
    To make us life easier, the makers of SQL Developer included support of the explain plan, and as of v1.1, autotrace!
    I'm sure you've got enough to work things out from here...
    Regards,
    K.

  • How to get only the record which is different by outer join

    Hi,
    how to get the values Existing in table A which are not existing in table B by using left outer join, In this example only the record '3' should display. thanks
    the requirementment is like
    Table A.Number Table B.Number
    1 1
    2 2
    3 4
    4 5
    output
    3

    SQL>  with a as (
    select 1 a from dual union all
    select 2 a from dual union all
    select 3 a from dual union all
    select 4 a from dual
    b as (
    select 1 a from dual union all
    select 2 a from dual union all
    select 4 a from dual union all
    select 5 a from dual
    select a.*
      from a left outer join b on (a.a = b.a)
    where b.a is null
             A
             3

  • How to manually change the thumbnail images of the new tab page (without using addons)?

    I wanted to customize the images displayed on the thumbnails on the New Tab Page. I tried using the addon "New Tab Tools" to do so and it worked, for a while. Now a bug seems to have affected it (it is not displaying any thumbnails, so I uninstalled it). So I want to try another approach. I want to MANUALLY change the images for each of the thumbnail on the new tab page (of course, the thumbnails are 'pinned').
    (I read some other articles related to thumbnails, specifically about DELETING them, and it asked me to open the Firefox Profile Folder, and in there, delete the thumbnails folder. I thought I could simply change the images stored in it instead of deleting them, but there is NO thumbnails folder in the Firefox profile folder (I accessed the profile folder thru the troubleshooting information section in the help menu). So where is this thumbnails folder after all?)
    So, how can I do it?
    Thanks in advance.

    I note you are using Icedragon 26. Not sure I have come across that before.
    I guess they provide their own support, as they are apparently offering something based on an outdated and unsupported Firefox26. I see their forum has threads on Icedragon if you search for them, but at a quick glance I see no specific topic
    *https://forums.comodo.com <br /> & https://forums.comodo.com/index.php?action=search2
    You could always install an official and up to date Firefox 29
    * See [[How to download and install Firefox on Windows]]
    * Download from http://www.mozilla.org/en-US/firefox/all/
    You may note the New Tabs page may be subject to a few changes over coming versions of Firefox it is apparently being improved. Firefox itself as Fx29 is also slightly changed from Fx26
    * [[Learn more about the design of the new Firefox]]

  • Periodic Alert-How to send all the records returned from the SQL in a mail?

    Hello all,
    I have defined a Periodic Alert, my SQL query returns more than one record whenever I run it. I also defined an action to send an email with the message consisting of the output variables from the SQL. Whenever i run this alert, a mail is being sent for every single record returned from the query. But i want to send a single mail containing all the records information that my SQL query returns.
    For Example: My SQL query lists all the users created on current date.
    Select User_Id, User_Name into &OUTPUT1, &OUTPUT2
    from fnd_users where trunc(creation_date) = trunc(sysdate)
    Now i want to send a mail with all the users information from the above query, to SYSADMIN. How can this be achieved?
    Thanks & Regards
    chakoo

    Hi Chakoo,
    If the Periodic Alert is not working as requried. You can write a simple package with 3 procedures to implement the writing output to a out file and simultaneuosly send email to multiple receiptents.
    Example:
    Create Package xx_pac
    Create public Procedure P1
    begin
    Select User_Id, User_Name into &OUTPUT1, &OUTPUT2
    from fnd_users where trunc(creation_date) = trunc(sysdate)
    fnd_file.put_line (fnd_file.output, &OUTPUT1, &OUTPUT2);
    end;
    (Create private Procedure P2
    begin
    ---Write the email package using the UTL_SMTP approch. Using this approch you can send the procedure P1 output file as an attachment to the desiginated receiptents.
    end;
    (Create public Procedure P3
    begin
    ---call the procedure P1 using the "g_request_id = fnd_request.submit_request"
    ---Wait for the above procedure to complete using "l_conc_status := fnd_concurrent.wait_for_request" procedure.
    ---call the procedure P2. (When called you must provide the correct to, from address)
    end;
    end;
    Register the Package xx_pac as a concurrent program and schedule when submit it from the request.
    Regards
    Arun Rathod

  • How to fetch all the records from ztable

    Hi 
    My program is outbound program.
    According to the requirement i have to fetch all the records from ztable which are not tranmitted before to the third party and once the records are extracted and written to output file they will be marked as 'X' in the "status" field of that ztable for the next days run.
    How to fetch the records.Please suggest me.
    Thanks,
    Neelima

    HI,
    Fetch all the records whose status is equal to 'X' as whatever data is sent to third party system is marked as 'X' in status field of table after sending.
    You need to first fetch the data into internal table using the select statement where status EQ space. You get the data which is not yet transmitted to third part. And later in the program after trasmitting the data to third party modify the Records in the DB table which are transmitted with Staus eq 'X'.

  • How can I save the recorded calls automatically in CCX?

    I use CCX for contact center. I would like to record the conversation between agents and the callers.
    I use server based recording and I can listen the recorded conversation by Supervisor Record Viewer.
    I also can save the recorded conversation by Supervisor Record Viewer but one-by-one.
    Could anyone suggest me how I can convert the raw files (saved by VoIP Monitor) into wav files simultaneously?
    I know that the Supervisor Record Viewer is not intended to archive conversations, but I have read somewhere that is there any possibility to archive the recorded conversations automatically. Unfortunately I did not find how.
    Thanks,
    Laszlo

    This has been covered on the forum before; however, I'll get you started so you know what you're searching for.
    This is done in two parts:
    You need to configure a workflow action for CAD on the Answered event to start recording if you want this to happen automatically.
    You can use the Raw2Wav.exe file stored on the CCX server as part of a batch file to periodically convert the RAW files to WAV files. The Raw2Wav.exe utility only converts the file. Your batch script would need to take care of moving them off of the CCX server. Do *not* use the CCX server as your file server to store these!

  • How to move  between  the records of a block  quickly

    Hi ,
    i am using dev6i  and i have a form connected to data block
    this table has 500,000 record
    when new_form_Instance  it executes the query
    the number of record dispalyed is 5
    The problem is  when i go  to the 6th Record  or higher  it takes few second to go to  each record
    The Question is
    How can i make the form fetch more record ? or how to make the movement between the record faster ?
    Regards,

    ayadsufyan wrote:
    Thanks NewRodeo
    I tried to to change the  Query _Array_Size  And Number_Of_Record_Buffered but  it doesn't work
    What did you change these properties too?  Since you are dealing with a rather large record set, I recommend you change these properties to 50 or 100 each.  The initial query time to display the first set of records will be a little longer because it is fetching so many records, but scrolling through the records will be faster because Forms will already have 50 to 100 of the records fetched.  Once the records fetched have been displayed, then Forms will have to communicate with the database to fecth the next 50 to 100 records.
    Craig...

  • How to quickly fetch the records from an SQL recordset

    I'm using LW/CVI V7.1.1 and SQL Toolkit V2.06.
    When displaying the recordset from a SELECT statement I use the following construct:
      SQLhandle1 = DBActivateSQL(DBhandle, SELECTtext);
      DBBindCol() statements.......
      numRecs = DBNumberOfRecords(SQLhandle1);
      for (n=1; n<=numRecs; n++) {
        DBFetchNext(SQLhandle1);
        display record to the user...
      DBDeactivateSQL (SQLhandle1);
    This has always worked fine for me when using local databases. Now I am developing an app for a remote database, and the fetching of each selected record is proving to be an issue. It takes at best, 60msecs for my round-trip network access to fetch each record. If selecting very many records, the fetching can add up to a considerable time delay.
    My question is, how can I bind the entire recordset to my application variables, (or to a local table?) in a single request to the database? Does LW/CVI support such a method? Or perhaps someone knows an SQL method to help me?
    Thanks

    Hi Michael,
    Thanks for the help. This is what I was looking for. Not sure why I missed it!
    However, after trying it out, it doesn't seem to help. The statement:  DBGetVariantArray(SQLhandle, &array, &recs, &fields); seems to take the same amount of time to get the records as the individual DBFetchNext() statements. So if my SQL statement matches 100 records, the DBGetVariantArray() call will take 100*60msec to complete.
    Is there a DB attribute setting that needs changed?

Maybe you are looking for