How to map steam as a material?

Hi Gurus,
I have a process where steam is product which I am manufacturing in the plant.
This steam is further used to make another finished material.
Since steam is produced in house, it cannot be mapped a pipeline.
Since we cannot maintain stocks of steam, how to map the material type of steam?
Pl advice me.
Srini

Hi Srini,
You can assign MRP views by modifying the attributes of material type PIPELINE. Rather create a new type referencing pipeline material type but include MRP views which should take care of the production part. Hope this is of some help.
Regards,
Sreekant.

Similar Messages

  • How to map 3 different Finished goods aginist one SFG Material

    Dear all,
    I have a SFG material "A " product. From this SFG -XX1, XX2,XX3 are the  3 different FG  product generated.
    How to map this 3 different FG againts One SFG.
    PLease tell me how to mapping this in Production?
    How to put Goods Receipt For XX1, XX2 & XX3?
    Regards
    Raghunath

    Dear ,
    This is a Co-Product scinario where One SFG good generating 3 different FG .You need  keep the following set up :
    1.In material master of the FG keep Co-Product Indicator ticked
    2.In BOM of ther SFG , keep all this three FG as BOM compoenet and Keep the negetive quantity which are getting produced for a base unit quanity .At the same time , selet the item line and go down to Basic Data Tab , keep the Co-Product Indicator ticked .
    3. To calculate the production cost of co-products give equivalence
    numbers in MRP2 view by clicking Joint Production push button
    or you can give the same in the settlement rule in the
    Production order by clicking Header menu - Settlement rule.
    5. You will get the GR qty for co-products while doing MB31, 101
    for the order of the header material.
    Hope this will help you to understand the business requirement .
    Regards
    JH
    Edited by: Jiaul Haque on Feb 9, 2010 8:52 AM

  • How to map back charge process

    Hello friends,
    I need help to map below scenario in SAP:
    We have third party business process, where vendor V1 is supplying material to customer. When customer receives material; V1 invoices us and we make payments to V1.At this point PO is closed for vendor V1.
    Now if customer faces any problem with material, then we call local vendor V2 to repair or service the material. What ever charges come from local vendor is suppose to reimburse by vendor V1.
    Now how can we link V2 vendor invoice amount to V1 invoice. What will be the document flow? How to map back charge process . 
    Note:
    We have considered adding negative line items to the existing PO but understand this is not possible once payment has been issued and the PO is closed.
    We have considered creating a u201Creverse sales orderu201D but do not want to create a separate order or handle the vendor under a separate sold-to account (as a customer)
    We have considered a manual FI invoice but do not want to handle the vendor under a separate sold-to account (as a customer)
    Seeking valuable inputs from experts.
    Regards
    Ravi

    Hi Raghavendra
    Yes V2 exist in SAP, right now we create new purchase order to V2 for services for material at customer location, after his service we do payment to V2 and same amount is charged to V1.
    While charging V1 , we need to treat V1 as a customer( sold to party ) , which we donu2019t want , and direct clearing from FI is also not fusible as we again need to treat V1 as customer ( sold to party ) .
    Our requirement is to map using some credit memo or debit memo or any other documents.
    regards
    Ravi

  • How to map AED in the case of domestic procurement.

    The procurement  process is they will raise PO to domestic vendor  and this vendor is importing material , so he is passing AED (Additional excise duty ) to this customer , while doing GR AED is not capturing in AED field and it is not updating in Register.  Here  they are doing J1IEX in that they are adding (Manually) AED vale to BED and posting in the register it is updating (BED +AED) but for capital goods AED cal avail full but here it is possible for only 50% . How to capture AED value at the time of GR and update in the registers.   How to map AED in the case of domestic procurement.

    Hi
    All the setting will be same the trick is maintain the condition record say FV11 as 0 % for condition type for AED and AED total as 100%
    do same as u do it for JMOP
    And in SPRo also the same setting as Jmop do it for AED
    In account determination for GRPO IP assign Gl account of ADC under AED
    now when u post excise invoice in additional tab u will see GRPO put IP in subtransaction  this is important
    and put the amount in AED what the vendor have passed.
    and now u will be able to post BED and ADC seperately in domestic purchase
    hope this helps

  • How to Map IDOC Extensions in LSMW

    HI,
    I am working on a conversion for uploading material master using IDOC Method, There is an extension in the IDOC can anyone tell me how to map the extensions in the LSMW.
    ADVANCE Thanks
    Guhapriyan Subrahmanyam

    Hi guhapriyan,
    if you have any extension associated with MATMAS then it will display when you press F4 on extension, form the list you can choose the extension.
    and proceed ....
    the extension is for custom fields ,for this you need extend the idoc. if you add the extension to it, in lsmw extension you can see them...
    Regards
    vijay

  • How  to map the Third Party materila for Job Wok process in our Plant

    Dear All,
    please guide me how  to map the  Third Party  Subcontracting in Our Plant Means Customer materials to be Processed  in our Plant and  then we have to sent to customer after processing.
    please  Brief me  with the Proces sflow
    Reagrds
    kishore Edagali

    1) create a 2 material as non valuated (one incoming material "A1"& after processed material"B1")
    2) create a BOM. for A1
    & assign the B1 and maintain respective conversion
    3) create a routing for A1 and assign the relevant work center
    4) create a manual PO to receive the material from customer and store it in storage location
    5) create a production order and release the order  in co01
    6)issue the material :B1 to the order 9 in MB1a, 261 movement)
    7) and confirm the order (so that cost incurred for order is captured)
    8) create a  sale order and maintain service price in PR00 and send the material A1 to customer.

  • How to map operation subcontracting in a process order.

    Dear Gurus,
    How to map operation subcontracting in a process order.
    there are five operations in a process after three operations the material is send to a subcontract for further processing(i.e the fourth) then it comes to the plant and the fifth operations completed
    How can i map this process .
    Thanking you in advance
    Regards
    Ram

    Hi,
    have you tried external operations in  receipe.  There you need to maintain all the procurement realted data for that particular operations that is done outside,  and system creates PR for every process order that you release.  However the material goes and comes in without any material number  (as WIP).
    If you want to have more control,  create a part number before SC operations  and afer SCoperations   and then use subcontracting process in procurement. 
    The need determines which option you can go with.
    cheers
    Rav

  • How to map consignment stockist process

    Dear Gurus
    My client is doing business trading business he is acted as  consignment stockist for IOCL company. IOCL has given a enterprise portal to do this business. My client sending purchase indent through this enterprise portal. IOCL send the goods to my client go down, the maintenance fee and everything is paying by IOCL . My client selling goods to the customer and delivering products from our godown. The customer is paying to my client with some different terms of payment. My client paying amount to the IOCL within 48 hours through bank or direct payment. But purchase sales order, delivery, and billing is done by IOCL. IOCL sends the invoice to our client through enterprise portal. Then my client send the goods to the customer from our godown based on the Invoice generated in enterprise portal. How to map this business in my client sap system.
    Regards
    Thiruapthi
    Edited by: gopathi3 on Jan 27, 2012 6:42 PM

    Hi Raghavendra
    Yes V2 exist in SAP, right now we create new purchase order to V2 for services for material at customer location, after his service we do payment to V2 and same amount is charged to V1.
    While charging V1 , we need to treat V1 as a customer( sold to party ) , which we donu2019t want , and direct clearing from FI is also not fusible as we again need to treat V1 as customer ( sold to party ) .
    Our requirement is to map using some credit memo or debit memo or any other documents.
    regards
    Ravi

  • How to map this scenario..?

    Hi,
    I have one requirement to map in SAP,
    Scenario:
    1)PO will be raised for a material A.
    2)Material A contains 5 different component materials( ie by assembling 5 components we will get Material A)
    3)When I do GR for Material A against that PO, stock has to be updated only for 5 components not for material A.
    Can you pls tel me how to map this in SAP.
    Your inputs are rewardable.
    Regds

    Hi ,
    pls follow this process;
    As Charu said, you can create material A as non-stock material and create BOM and assign the  five
    components.
    1.Create Subcontracting PO, item category as L.
    2.Use MB1B to transfer post the components to subcontractor(vendor) and assign the PO.
    (Make sure that you have enough stock of your components in your unrestricted stock.)
    If not increase the initial stock balance for the  components using 561 movement type, using MB1C Tcode.
    3.Create subcontracting challan against this mat doc.Tcode J1if01.
    4.Now  do Migo. In the excise tab you can select as refer subcontracting challan, a pop-up will appear.
    enter the challan no .Mat doc will be posted.
    5.Reconcile the challan using J1ifQ tcode, against the Migo doc.
    6.If its fully  reconciled, i.e if you have received full quantity,the challan would be fully reconciled
    and you can complete the challan using J1if13.
    You can print the challan by clicking print immediately check box.
    7.Then MIRo.
    Award points if useful.
    Regards
    Kumar

  • How to map this scenerio..... please help

    Hi Experts,
    Please tell me how to map this scenerio.
    We want to produce 1000pc of plastic bottles. After production in this 1000 pc, assume that 100 pc of plastic bottles are having scraches on there surfaces but these bottles are not considered as scrap and we want to call this as B Grade materials. Similarly another 100 pc are also found same type of problem and we want to call this as C Grade materials. And remaining 800 pc , We want to call this as A Grade materials.
    But all 1000 pc we want to sell, only the thing is with different price for A,B and C grade materials
    Material is same i.e., Plastic Bottle (FERT) but depending on grades My client want to differentiate it.
    Please Experts Clear me and help me how to map this in pp.
    Thanks and Regards,
    sap pp

    Hi
    You Maintain Split Valuation No need to maintain Diffrent Material code , U maintain Diffrent Valuation Type With Diffrence price , and Maintain Diffrent Batches with batch number as Grade, assign the valuation type to batch , at the time of confirmation based on the grade you selct the batch number and confirm , it will be saved with diffrent grade with diffrent valuation.
         What is Split Valuation?
    Split Valuation means managing a material as several partial stocks. Each partial stock is  valuated separately.
         Why do you require Split Valuation?
    Split Valuation is required for certain materials in order to valuate them separately.
    Following can be the reasons for opting for split valuation:-
         1) Different origin of the material
         2) Different grades of the material
         3) Different statutes of the material
         4) Differentiation between in -house production and external procurement
         5) Differentiation between deliveries
    IMG -> Materials Managementà Valuation and Account Assignment-> Split Valuation-> Activate Split Valuation
    IMG à Materials Managementà Valuation and Account Assignmentà Split
    Valuationà Activate Split Valuation à Configure Split Valuation
    IMG à Materials Managementà Valuation and Account Assignmentà Split
    Valuationà Activate Split Valuation à Configure Split Valuation
    2.2 Create Valuation type
    IMG à Materials Managementà Valuation and Account Assignmentà Split Valuationà Activate Split Valuation à Configure Split Valuation
    2.Allocate Valuation type to Valuation categories
         IMG ->Materials Management-> Valuation and Account Assignment-> Split      Valuation-> Activate Split Valuation -> Configure Split Valuation
    2.4 Allocate Valuation categories to Valuation areas
    IMG à Materials Managementà Valuation and Account Assignmentà Split  Valuationà Activate Split Valuation à Configure Split Valuation
    2.5 Default Valuation type per plant
    IMG à Materials Managementà Valuation and Account Assignmentà Split Valuationà Activate Split Valuation à Configure Split Valuation
    Create Manul batch number tcode- MSC1N Eg : A - Grade , B - Grade like that ,assign the Valution type to batch IN MSC1N Or MSC2N,
    I hope this will workout.
    Madhu

  • How to mapped CO2 in the process

    Dear Master,
    In the Beer manufacturing process Co2 is produced ( it is taken as byproduct ) & that co2 is used for filling cylinder in Keg.But the amount of CO2 produced is less so it is procured from other vendor to fulfill the requirement.
    Please explain me how to mapped in the process?

    Hi,
    Well Come to SDN...!!!
    Maintain procurement type of that material as E. So that you can both purchase it from outside or can make in-house as bi-product.
    Hope it is clear to you.
    Regards,
    Alok Tiwari

  • Back charges senario , how to map????

    Hello friends,
    I need help to map below scenario in SAP:
    We have third party business process, where vendor V1 is supplying material to customer. When customer receives material; V1 invoices us and we make payments to V1.At this point PO is closed for vendor V1.
    Now if customer faces any problem with material, then we call local vendor V2 to repair or service the material. What ever charges come from local vendor is suppose to reimburse by vendor V1.
    Now how can we link V2 vendor invoice amount to V1 invoice. What will be the document flow? How to map back charge process .
    Note:
    We have considered adding negative line items to the existing PO but understand this is not possible once payment has been issued and the PO is closed.
    We have considered creating a u201Creverse sales orderu201D but do not want to create a separate order or handle the vendor under a separate sold-to account (as a customer)
    We have considered a manual FI invoice but do not want to handle the vendor under a separate sold-to account (as a customer)
    Seeking valuable inputs from experts.
    Regards
    Ravi

    Hi,
    Option 1
    If you are using QM Module, you can create a notification (Customer Compliant, Vendor Compliant, Internal Problem so on) with reference to Material Document / Sales Order / Production Order so on.
    Option 2
    If V2 Vendor exclusively for V1 Vendor, then you can use Head Office and Branch Office concepts in Vendor Master.
    You can specify head office account number only for branch accounts. Materials that posts using the branch account number are automatically posted to the Head Office Account. The system records the branch account number in the line items.
    PS: Neither transactions nor balances are kept in the branch account.
    Option 3
    At the time of Logistics Invoice Verification, post to different Vendor (subject to your finance / accounts clerance)
    Bye,
    Muralidhara

  • Map UNSPSC code to Material Group for punch-out catalogues

    Hi All,
    can anyone share an experience with the best way of mapping UNSPSC codes to Material Groups for punch-out catalogues.
    I've been looking at the Schema config under the Content Management section in  the IMG (Supplier Relationship Management > SRM Server > Master Data > Content Management > Mapping for Schemas) but can't really find any docuemtnation to describe exactly how this can be used.
    I guess the alternative option is to create a custom table and use the BBP_CATALOG_TRANSFER BADI but if this can be done as standard using config rather than ABAP developemnt that would be a preferable solution.
    Thanks
    Chris

    Hi,
    Best way is to activate the BBP_CATALOG_TRANSFER BADI. this encompasses or can be customized accordingly to
    1. To map UNSPSC with Product Categories/Material groups (however custom z table needs to be created which does the mapping)
    2. Some supplier catalogs will send  too much information, most of which is not necessary for SRM, here whatever is needed can be filtered out
    This BADI overall enriches the data transferred from the supplier.
    hope this helps!
    Thanks,
    Prashanth

  • How to map existing project &how to creat PR

    hi
    1) i'm completed implimentation ,for one of client .now i need to map the existing project(which is running form two year ) to          SAP-PS .pl let me know how to map
    2) pl let me know how to create the PR for Power Plant Constraction (WE dont know the meterial required for project ,company give to the compelite contract to one vender  )

    for mapping existing project use data migration techniques like LSMW or use BAPI to create project, if existing projects are on MS project then OPEN PS can be considered.
    create PR with a material which has no description and you change the description to what ever you like

  • How to map many finished product in one bom

    Sir,
    i hav one raw material sheet in which i will cut number of finished products.how i map in bom.all finished product has cut in differnt quantity.

    Hi
    Actually this is purely based on the client reqmt.
    If they need to maintian the diff bom for all the product . you should need to maintained. even though you use same raw material for all the  products.with diff qty and if they need to calculate the costing inoccur for the each product
    or
    you can use as co -porduct as forum member told.

Maybe you are looking for