How to mark a table as transport relevant

Hi Guru's,
I just have seen that our CO-PA characteristic derivation table is open for maintenance in Productive system. But this is customizing and should be transport relevant.
Can you please explain how to mark this as transport relevant and how to close this maintenance in productive system?
Thanks

I know about the documentation i mean about the method
itself.
is putting @deprecated at the documentation will
generate a warrning message if u did not use
-deprecation as a parameter while compilingThat is how to do it! You will only get a warning if you make use of a deprecated method. Why would you want to deprecate a method, and then carry on using it in your own code? You need to change the usages to whatever you have implemented to replace the missing required functionality.

Similar Messages

How to include a table into transport request

Hello,
please, i want to export 2 tables into a request order, then i will import this order on an other system; is it possible?
how please?
Regards

Hi,
In that case it will help you
http://searchsap.techtarget.com/tip/How-to-transport-table-entries
Regards,

How to mark the physical tables as cacheable

Hi All,
Can someone please tell me how to mark the physical tables as cacheable.
Thnaks a lot

Hi,
by default they are cacheable...
You can see it on repository, physical layer, right clik on table, properties, on general tab, check cacheable...
You can specify peristence time...
See this article, you will find an image with table properties:
http://obieeblog.wordpress.com/2009/01/19/obiee-cache-is-enabled-but-why-is-the-query-not-cached/
Regards
Nicoale
Edited by: Nicolae Ancuta on 26.05.2010 09:15

How can i import tables from a different schema into the existing relational model... to add these tables in the existing model? plss help

how can i import tables from a different schema into the existing relational model... to add these tables in the existing relational/logical model? plss help
note; I already have the relational/logical model ready from one schema... and I need to add few more tables to this relational/logical model
can I import the same way as I did previously??
but even if I do the same how can I add it in the model?? as the logical model has already been engineered..
please help ...
thanks

Hi,
Before you start, you should probably take a backup copy of your design (the .dmd file and associated folder), in case the update does not work out as you had hoped.
You need to use Import > Data Dictionary again, to start the Data Dictionary Import Wizard.
In step 1 use a suitable database connection that can access the relevant table definitions.
In step 2 select the schema (or schemas) to import. The "Import to" field in the lower left part of the main panel allows you to select which existing Relational Model to import into (or to specify that a new Relational Model is to be created).
In step 3 select the tables to import. (Note that if there are an Foreign Key constraints between the new tables and any tables you had previously imported, you should also include the previous tables, otherwise the Foreign Key constraints will not be imported.)
After the import itself has completed, the "Compare Models" dialog is displayed. This shows the differences between the model being imported and the previous state of the model, and allows you to select which changes are to be applied.
Just selecting the Merge button should apply all the additions and changes in the new import.
Having updated your Relational Model, you can then update your Logical Model. To do this you repeat the "Engineer to Logical Model". This displays the "Engineer to Logical Model" dialog, which shows the changes which will be applied to the Logical Model, and allows you to select which changes are to be applied.
Just selecting the Engineer button should apply all the additions and changes.
I hope this helps you achieve what you want.
David

How to create a Table of content in pages?

I am using iPad pages, and figuring out how to create a table of content.

I would say: Try and Error. Create a copy of your document and unmark in the copied document in the document inspector all boxes for the TOC. Then mark them again. Maybe you should also delete the paragraph styles and mark them again. If that doesn't work, try to copy the complete text of your document to a new created one. Maybe that works.
Good luck!
P.S.: If that doesn't work look here. Maybe this helps.

How to create hashed table in runtime

hi experts
how to create hashed table in runtime, please give me the coading style.
please help me.
regards
subhasis

Hi,
Have alook at the code, and pls reward points.
Use Hashed Tables to Improve Performance :
report zuseofhashedtables.
Program: ZUseOfHashedTables                                        **
Author: XXXXXXXXXXXXXXXXXX                                 **
Versions: 4.6b - 4.6c                                              **
Notes:                                                             **
    this program shows how we can use hashed tables to improve     **
    the responce time.                                             **
    It shows,                                                      **
       1. how to declare hashed tables                             **
       2. a cache-like technique to improve access to master data **
       3. how to collect data using hashed tables                  **
       4. how to avoid deletions of unwanted data                  **
Results: the test we run read about 31000 rows from mkpf, 150000   **
         rows from mseg, 500 rows from makt and 400 from lfa1.     **
         it filled ht_lst with 24500 rows and displayed them in    **
         alv grid format.                                          **
         It needed about 65 seconds to perform this task (with     **
         all the db buffers empty)                                 **
         The same program with standard tables needed 140 seconds **
         to run with the same recordset and with buffers filled in **
Objetive: show a list that consists of all the material movements **
         '101' - '901' for a certain range of dates in mkpf-budat. **
the columns to be displayed are:                                   **
         mkpf-budat,                                               **
         mkpf-mblnr,                                               **
         mseg-lifnr,                                               **
         lfa1-name1,                                               **
         mkpf-xblnr,                                               **
         mseg-zeile                                                **
         mseg-charg,                                               **
         mseg-matnr,                                               **
         makt-maktx,                                               **
         mseg-erfmg,                                               **
         mseg-erfme.                                               **
or show a sumary list by matnr - menge                             **
You'll have to create a pf-status called vista -                   **
See form set_pf_status for details                                 **
tables used -
tables: mkpf,
        mseg,
        lfa1,
        makt.
global hashed tables used
data: begin of wa_mkpf, "header
      mblnr like mkpf-mblnr,
      mjahr like mkpf-mjahr,
      budat like mkpf-budat,
      xblnr like mkpf-xblnr,
      end of wa_mkpf.
data: ht_mkpf like hashed table of wa_mkpf
      with unique key mblnr mjahr
      with header line.
data: begin of wa_mseg, " line items
      mblnr like mseg-mblnr,
      mjahr like mseg-mjahr,
      zeile like mseg-zeile,
      bwart like mseg-bwart,
      charg like mseg-charg,
      matnr like mseg-matnr,
      lifnr like mseg-lifnr,
      erfmg like mseg-erfmg,
      erfme like mseg-erfme,
      end of wa_mseg.
data ht_mseg like hashed table of wa_mseg
      with unique key mblnr mjahr zeile
      with header line.
cache structure for lfa1 records
data: begin of wa_lfa1,
      lifnr like lfa1-lifnr,
      name1 like lfa1-name1,
      end of wa_lfa1.
data ht_lfa1 like hashed table of wa_lfa1
      with unique key lifnr
      with header line.
cache structure for material related data
data: begin of wa_material,
      matnr like makt-matnr,
      maktx like makt-maktx,
      end of wa_material.
data: ht_material like hashed table of wa_material
        with unique key matnr
        with header line.
result table
data: begin of wa_lst, "
      budat like mkpf-budat,
      mblnr like mseg-mblnr,
      lifnr like mseg-lifnr,
      name1 like lfa1-name1,
      xblnr like mkpf-xblnr,
      zeile like mseg-zeile,
      charg like mseg-charg,
      matnr like mseg-matnr,
      maktx like makt-maktx,
      erfmg like mseg-erfmg,
      erfme like mseg-erfme,
      mjahr like mseg-mjahr,
      end of wa_lst.
data: ht_lst like hashed table of wa_lst
        with unique key mblnr mjahr zeile
        with header line.
data: begin of wa_lst1, " sumary by material
      matnr like mseg-matnr,
      maktx like makt-maktx,
      erfmg like mseg-erfmg,
      erfme like mseg-erfme,
      end of wa_lst1.
data: ht_lst1 like hashed table of wa_lst1
        with unique key matnr
        with header line.
structures for alv grid display.
itabs
type-pools: slis.
data: it_lst            like standard table of wa_lst with header line,
      it_fieldcat_lst   type slis_t_fieldcat_alv with header line,
      it_sort_lst       type slis_t_sortinfo_alv,
      it_lst1           like standard table of wa_lst1 with header line,
      it_fieldcat_lst1 type slis_t_fieldcat_alv with header line,
      it_sort_lst1      type slis_t_sortinfo_alv.
structures
data: wa_sort         type slis_sortinfo_alv,
      ls_layout       type slis_layout_alv.
global varialbes
data: g_lines type i.
data: g_repid like sy-repid,
      ok_code       like sy-ucomm.
selection-screen
"text: Dates:
select-options: so_budat for mkpf-budat default sy-datum.
"text: Material numbers.
select-options: so_matnr for mseg-matnr.
selection-screen uline.
selection-screen skip 1.
"Text: show summary by material.
parameters: gp_bymat as checkbox default ''.
start-of-selection.
perform get_data.
perform show_data.
end-of-selection.
      FORM get_data                                                 *
form get_data.
        select mblnr mjahr budat xblnr
            into table ht_mkpf
           from mkpf
          where budat in so_budat. " make use of std index.
have we retrieved data from mkpf?
describe table ht_mkpf lines g_lines.
if g_lines > 0.
if true then retrieve all related records from mseg.
Doing this way we make sure that the access is by primary key
of mseg.
The reason is that is faster to filter them in memory
than to allow the db server to do it.
    select mblnr mjahr zeile bwart charg
             matnr lifnr erfmg erfme
      into table ht_mseg
      from mseg
        for all entries in ht_mkpf
     where mblnr = ht_mkpf-mblnr
       and mjahr = ht_mkpf-mjahr.
endif.
fill t_lst or t_lst1 according to user's choice.
if gp_bymat = ' '.
    perform fill_ht_lst.
else.
    perform fill_ht_lst1.
endif.
endform.
form fill_ht_lst.
refresh ht_lst.
Example: how to discard unwanted data in an efficient way.
loop at ht_mseg.
filter unwanted data
    check ht_mseg-bwart = '101' or ht_mseg-bwart = '901'.
    check ht_mseg-matnr in so_matnr.
read header line.
    read table ht_mkpf with table key mblnr = ht_mseg-mblnr
    mjahr = ht_mseg-mjahr.
    clear ht_lst.
* note : this may be faster if you specify field by field.
    move-corresponding ht_mkpf to ht_lst.
    move-corresponding ht_mseg to ht_lst.
    perform read_lfa1 using ht_mseg-lifnr changing ht_lst-name1.
    perform read_material using ht_mseg-matnr changing ht_lst-maktx.
    insert table ht_lst.
endloop.
endform.
form fill_ht_lst1.
refresh ht_lst1.
Example: how to discard unwanted data in an efficient way.
         hot to simulate a collect in a faster way
loop at ht_mseg.
filter unwanted data
    check ht_mseg-bwart = '101' or ht_mseg-bwart = '901'.
    check ht_mseg-matnr in so_matnr.
* note : this may be faster if you specify field by field.
    read table ht_lst1 with table key matnr = ht_mseg-matnr
    transporting erfmg.
    if sy-subrc <> 0. " if matnr doesn't exist in sumary table
    " insert a new record
      ht_lst1-matnr = ht_mseg-matnr.
      perform read_material using ht_mseg-matnr changing ht_lst1-maktx.
      ht_lst1-erfmg = ht_mseg-erfmg.
      ht_lst1-erfme = ht_mseg-erfme.
      insert table ht_lst1.
    else." a record was found.
    " collect erfmg. To do so, fill in the unique key and add
    " the numeric fields.
      ht_lst1-matnr = ht_mseg-matnr.
      add ht_mseg-erfmg to ht_lst1-erfmg.
      modify table ht_lst1 transporting erfmg.
    endif.
endloop.
endform.
implementation of cache for lfa1.
form read_lfa1 using p_lifnr changing p_name1.
        read table ht_lfa1 with table key lifnr = p_lifnr
        transporting name1.
if sy-subrc <> 0.
    clear ht_lfa1.
    ht_lfa1-lifnr = p_lifnr.
    select single name1
       into ht_lfa1-name1
      from lfa1
    where lifnr = p_lifnr.
    if sy-subrc <> 0. ht_lfa1-name1 = 'n/a in lfa1'. endif.
    insert table ht_lfa1.
endif.
p_name1 = ht_lfa1-name1.
endform.
implementation of cache for material data
form read_material using p_matnr changing p_maktx.
read table ht_material with table key matnr = p_matnr
transporting maktx.
if sy-subrc <> 0.
    ht_material-matnr = p_matnr.
    select single maktx into ht_material-maktx
      from makt
     where spras = sy-langu
       and matnr = p_matnr.
    if sy-subrc <> 0. ht_material-maktx = 'n/a in makt'. endif.
    insert table ht_material.
endif.
p_maktx = ht_material-maktx.
endform.
form show_data.
if gp_bymat = ' '.
    perform show_ht_lst.
else.
    perform show_ht_lst1.
endif.
endform.
form show_ht_lst.
"needed because the FM can't use a hashed table.
it_lst[] = ht_lst[].
perform fill_layout using 'full display'
                       changing ls_layout.
perform fill_columns_lst.
perform sort_lst.
g_repid = sy-repid.
call function 'REUSE_ALV_GRID_DISPLAY'
       exporting
            i_callback_program       = g_repid
            i_callback_pf_status_set = 'SET_PF_STATUS'
            is_layout                = ls_layout
            it_fieldcat              = it_fieldcat_lst[]
           it_sort                  = it_sort_lst
       tables
            t_outtab                 = it_lst
       exceptions
            program_error            = 1
            others                   = 2.
endform.
form show_ht_lst1.
"needed because the FM can't use a hashed table.
it_lst1[] = ht_lst1[].
perform fill_layout using 'Sumary by matnr'
                       changing ls_layout.
perform fill_columns_lst1.
perform sort_lst.
g_repid = sy-repid.
call function 'REUSE_ALV_GRID_DISPLAY'
       exporting
            i_callback_program       = g_repid
            i_callback_pf_status_set = 'SET_PF_STATUS'
            is_layout                = ls_layout
            it_fieldcat              = it_fieldcat_lst1[]
           it_sort                  = it_sort_lst
       tables
            t_outtab                 = it_lst1
       exceptions
            program_error            = 1
            others                   = 2.
endform.
form fill_layout using p_window_titlebar
               changing cs_layo type slis_layout_alv.
clear cs_layo.
cs_layo-window_titlebar        = p_window_titlebar.
cs_layo-edit                   = 'X'.
cs_layo-edit_mode              = space.
endform.                    " armar_layout_stock
form set_pf_status using rt_extab type slis_t_extab.
create a new status
and then select extras -> adjust template -> listviewer
set pf-status 'VISTA'.
endform.        "set_pf_status
define add_lst.
clear it_fieldcat_lst.
it_fieldcat_lst-fieldname     = &1.
it_fieldcat_lst-outputlen     = &2.
it_fieldcat_lst-ddictxt       = 'L'.
it_fieldcat_lst-seltext_l       = &1.
it_fieldcat_lst-seltext_m       = &1.
it_fieldcat_lst-seltext_m       = &1.
if &1 = 'MATNR'.
    it_fieldcat_lst-emphasize = 'C111'.
endif.
append it_fieldcat_lst.
end-of-definition.
define add_lst1.
clear it_fieldcat_lst.
it_fieldcat_lst1-fieldname     = &1.
it_fieldcat_lst1-outputlen     = &2.
it_fieldcat_lst1-ddictxt       = 'L'.
it_fieldcat_lst1-seltext_l       = &1.
it_fieldcat_lst1-seltext_m       = &1.
it_fieldcat_lst1-seltext_m       = &1.
append it_fieldcat_lst1.
end-of-definition.
form fill_columns_lst.
set columns for output.
refresh it_fieldcat_lst.
add_lst 'BUDAT' 10.
add_lst   'MBLNR' 10.
add_lst 'LIFNR' 10.
add_lst 'NAME1' 35.
add_lst 'XBLNR' 15.
add_lst    'ZEILE' 5.
add_lst    'CHARG' 10.
add_lst   'MATNR' 18.
add_lst   'MAKTX' 30.
add_lst   'ERFMG' 17.
add_lst   'ERFME' 5.
add_lst   'MJAHR' 4.
endform.
form fill_columns_lst1.
set columns for output.
refresh it_fieldcat_lst1.
add_lst1 'MATNR' 18.
add_lst1 'MAKTX' 30.
add_lst1 'ERFMG' 17.
add_lst1 'ERFME' 5..
endform.
Regards,
Ameet

DBMS_FGA.add_policy .. How to handle multiple tables and multiple users

Dear All,
My database is 11gR1 and Linux is the platform.
I have more then 50 very important tables and around 15 database users.
I want to implement fine grained auditing on these important tables.
This is how I am going to implement it:
SQL>BEGIN
DBMS_FGA.add_policy(
object_schema     =>     'Scott',
object_name     =>     'SAL',
policy_name     =>     'SALARY_CHK_AUDIT',
audit_condition     =>     NULL,
handler_schema     =>     'imran',
statement_types     =>     'SELECT,INSERT,UPDATE,DELETE',
audit_column     =>     NULL);
END;
what is i have to pass multiple tables in object_schema and multiple users in handler_schema.
I hope i am able to clear my question, any doubts please let me know.
Regards, Imran

Hi,
object_schema - The schema of the object to be audited. (If NULL, the current log-on user schema is assumed.)
in case if you like to audit for multiple users - then try to test by holding a null value and test access the important tables -where the relevant auditing records are generated as per your requirement or not. i have not tested.. try it
- Pavan Kumar N

How to see the Table Names & Field Names by other than F1 help

Hi Experts
   How to see the Table Names & Field Names by other than F1 help, & How to see the List of MM Table Names.
Rgds

The only option to see the active table/ field name is through F1 --> Technical Information. Apart from this, you can use any 3rd part application like GUIex (INbuilt in SAP ECC 6.0 ... can be activated by clicking on the tri-color button on the top right), but you need technical knowledge to understand the information. As far consolidated list of MM tables is concerned, SAP don;t provide you the same at one place, it experience and knowledge which help you in this regard. For your immediate reference MM tables are as under :
EBAN - Purchase Requisition
EBKN - Purchase Requisition Account Assignment
EBUB   - Index for Stock Transport Requisitions for Materi
EINA    - Purchasing Info Record: General Data
EINE     - Purchasing Info Record: Purchasing Organization D
EIPA     - Order Price History: Info Record
EKAB   - Release Documentation
EKAN   - Vendor Address: Purchasing Document
EKBE    - History per Purchasing Document
EKBEH - Removed PO History Records
EKBZ    - History per Purchasing Document: Delivery Costs
EKBZH - History per Purchasing Document: Delivery Costs
EKEH    - Scheduling Agreement Release Documentation
EKEK    - Header Data for Scheduling Agreement Releases
EKES     - Vendor Confirmations
EKET     - Scheduling Agreement Schedule Lines
EKETH   - Scheduling Agreement Schedules: History Tables
EKKI      - Purchasing Condition Index
EKKN    - Account Assignment in Purchasing Document
EKKO    - Purchasing Document Header
EKPA     - Partner Roles in Purchasing
EKPB     - "Material Provided" Item in Purchasing Document
EKPO    - Purchasing Document Item
EKPV    - Shipping-Specific Data on Stock Tfr. for Purch. D
EKRS    - ERS Procedure: Goods (Merchandise) Movements to b
EKUB    - Index for Stock Transport Orders for Material
EORD    - Purchasing Source List
EQUK    - Quota File: Header

How to mark a support messge for deletion

Hi Gurus,
Can anyone guide me how to mark a service desk message for deletion?
You help highly appreciated
Thank you
BR
Saravanan Ramasamy

Hello Saravanan,
To delete unwanted support desk messages, you have to delete the basis part of a support desk message please follow note 566225. The CRM part can be archived with transaction SARA and the
archiving object CRM_SERORD. For CRM test messages alternatively the report CRM_ORDER_DELETE can be used.
To keep the system consistent, the ABA notification AND the assigned CRM
message have to be removed from the system.
To delete the ABA notification note 566225 can be used. The deletion of
CRM messages (e.g. with CRM_ORDER_DELETE) is not possible anymore (as of
note 845433).
The CRM message only can be archived. To archive the CRM message with
transaction SARA the archiving object CRM_SERORD is the correct one.
That numbers can be reused the relevant number ranges have to be reset.
This only can be done without causing problems when ALL ABA
notifications and CRM transaction existing in the system have been
deleted/archived.
Hope the above information helps you.
Regards
Amit

Tables and views relevant to concurrent program parameters

I'd like to know all the tables and views relevant to concurrent program parameters.
As far as I know, fnd_descr_flex_col_usage_vl, fnd_flex_value_sets, and fnd_parameters are such kind of tables or views. They can not provide enough information I want. As I guess that for some parameters, their values are queried from tables. Where can I find the information about how such parameters are queried?
Thanks in advance!

Hi,
I'd like to know all the tables and views relevant to concurrent program parameters. See these tables:
FND_CONCURRENT_QUEUE_PARAMS
FND_RUN_REQUESTS
FND_CONC_REQUEST_ARGUMENTS
FND_CONCURRENT_REQUESTS
FND_CONCURRENT_PROGRAMS
More details about these tables can be found in eTRM website.
eTRM
https://etrm.oracle.com
> They can not provide enough information I want. As I guess that for some parameters, their values are queried from tables. Where can I find the information about how such parameters are queried?
What information you are looking for?
You could get the query executed from the application by following the steps in (Note: 259722.1 - HOWTO Determine Table and Column Name from a field in a form in 11i) -- Query the concurrent program, then check the value of "SYSTEM.LAST_QUERY".
Regards,
Hussein

How and when the table will go STALE ?

Hi,
I want to check how and when a table will be marked as STALE.
I have done following steps
---- Created a table --------------------
SQL> create table t1 (id number, name varchar2(100)) ;
Table created.
---- Inserted decent amount of data --------------
SQL> declare v1 number; begin for i in 1..25 loop
2 insert into t1 select object_id, object_name from all_objects ; commit; end loop;
3 end;
4 /
PL/SQL procedure successfully completed.
SQL> select table_name, status, num_rows, last_analyzed, monitoring from user_tables where table_name='T1';
TABLE_NAME STATUS NUM_ROWS LAST_ANAL MON
T1 VALID YES
---- Gather stats -----------------
SQL> exec dbms_stats.gather_table_stats( user, 'T1', METHOD_OPT => 'FOR ALL COLUMNS SIZE 1');
PL/SQL procedure successfully completed.
SQL> select table_name, status, num_rows, last_analyzed, monitoring from user_tables where table_name='T1';
TABLE_NAME STATUS NUM_ROWS LAST_ANAL MON
T1 VALID 115544 18-JAN-08 YES
---- Insert more data ---------------------------
SQL> declare v1 number; begin for i in 1..25 loop
2 insert into t1 select object_id, object_name from all_objects ; commit; end loop;
3 end;
4 /
PL/SQL procedure successfully completed.
Now, after I have analyzed the table and get the stats in, I loaded good amount of data. So, in theory, this table should be marked as STALE.
Where can I check if this table has been marked STALE? when ?
Please guide.
Thanks

You need to read that manual with more caution. It has all info you need.
1. Table modification info stays in shared pool and flushed into dictionary by Oracle automatically. You can explicity do it by calling dbms_stats.flush_database_monitoring_info.
2. dba_tab_modifications view = How many DML are applied to target table?
dba_tab_statistics.stale_stats = Is statistics stale?
3. When you call dbms_stats.gather... familiy, Oracle flushed the stale info to disk. You gnerally don't need to care about that.
4. Statistics is considered to be stale, when the change is over 10% of current rows.
(As of 11g, this value can be customized per objects. Cool feature)
create table t_stat(id int);
insert into t_stat select rownum from all_objects where rownum <= 100;
commit;
exec dbms_stats.gather_table_stats(user, 'T_STAT');
select * from sys.dba_tab_modifications where table_name = 'T_STAT';
No row selected
select stale_stats from sys.dba_tab_statistics where table_name = 'T_STAT';
NO
insert into t_stat select rownum from all_objects where rownum <= 20;
select * from sys.dba_tab_modifications where table_name = 'T_STAT';
No rows selected <-- Oops
select stale_stats from sys.dba_tab_statistics where table_name = 'T_STAT';
NO <-- Oops
exec dbms_stats.flush_database_monitoring_info;
select * from sys.dba_tab_modifications where table_name = 'T_STAT';
TABLE_OWNER TABLE_NAME PARTITION_NAME SUBPARTITION_NAME INSERTS UPDATES DELETES TIMESTAMP TRUNCATED DROP_SEGMENTS
UKJA T_STAT 20 0 0 2008-01-18 PM 11:30:19 NO 0
select stale_stats from sys.dba_tab_statistics where table_name = 'T_STAT';
YES

Table content transport

Hello,
I have to transport a z table from dev to qa. How can I include the content of the table into my transport request?
Thank you!

Hi,
If you have created a table maintenance..
You can use SM30..
Press maintain button..
In the menu..Table view -> transport...Then select the entries include them in the CR.
If the transport menu is not enabled..
Go to SE11..
In the table maintenance generator...Choose the radio button which says "Standard recording routine" and then save..
Now the transport menu option will be enabled..
Regards,
Ram

How to send database table

how to send database table one sever to another server in the form of tms request.
i want send a particular database table one server to another as a request.
give solution plz
Message was edited by:
mahesh

Hi Mahesh,
Technically it is possible to transport entries of every table in SAP even if changes dont prompt for a transport request. Do the following. Create a customising/workbench request. It depends of the table whose entires you wish to transport. .If you wish you can just use workbench transport for all tables.
After you have created the transport click on the request and in menu bar choose Request/Task and then Display object list. Goto change mode.
Click on Inset line icon in application tool bar. A new line for input will come up.
In PGMID give the value R3TR
In Obj give value TABU
In Object Name give the name of the table.
After that double click on table name entry. You will come to the screen: Transport organizer:Change Key List.
Here again choose insert line. A new line with table name and key as the column headers will come up.
Double click on the empty input field for the key. In the next screen you will get options to fill in the key.
You can insert key as per your choice. However one thing needs to be remembered. If you put * in any field SAP wont allow you fill in value in later fields as only a final asterisk can be used as a generic entry.
Please try out this option. I use this option to transport RFC destinations as well profile parameters across systems.
Please award points if the answer was of help to you.
Regards.
Ruchit.

How to mark holidays in facory calendar img src='images/watch-16x16.gif'

Hi,
I need a help.
How to mark holidays in facory calendar.
Reward points will be given for helpful answers.

HI
Go to Transaction SCAL and Choose Holiday Calendar and click on change (Pencil) button.
Then click on create button and enter holidays and save.
Note: Once you complete creation of Holidays, finally click on transport button on main menu. THis will create transport request.
Hope it helps.
regards
Srinivas

Marking Z table entry for Deletion

Hi All,
Based on some condition in my program,
I am entrying one entry in Custom Z table.
Also for some other condition,
I need to mark the Table entry for deletion only, but it should not Delete.
So pls guide me for:
1) How to make Custom table entry as Mark for Deletion?
2) When I put Select Query on table, how can I write that do not Select those
Records which are marked for Deletion ?
Rishi

Hi Rishi,
Create a new field of type 'CDXFELD' (Data Type) in the Custom Z table. Now populate that new field with 'X' if it is marked for deletion. Then you can select all those entries which that field 'CDXFELD' = Space.
i.e., if the field 'CDXFELD' = 'X' then it is marked for deletion else not.
Select *
from Zcustom talbe
in to IT_TAB
where CDXFELD = space.
Hope this will help..
Regards,
Ravi..

How to mark a table as transport relevant

Similar Messages

Maybe you are looking for