How to mask the actual value from the user
Hi,
I am using Jdev 11..1.1.6.
I created a table with query panel using a VO based on SQL.
In one of my search criteria i need to show the values to the user as 1,2,3 in a Drop down.
if user select 1 and clicks search i need to send different values for that particular column. i.e i dont want to show the actual value passed to user.
Please some one guide me how to achieve this.
Thanks
Siva.
Hi Arun,
thanks a lot for the reply.
Am actually new to ADF.
Can u please explain for masking.
i have created the LOV with mask value but i cant able to understand where this actual list is correleated with the mask value.
A little more explanation could be very useful.
Regards
Siva
Similar Messages
-
Urgent: How to exclude a particular value from the selection in the infopac
How to exclude a particular value from the selection in the infopackage.
Ex: not load for cost center 10000
Thank you,
samHi Sam,
You cannot do this directly as exclusion, but you can include all other values, even as ranges and thus exclude the particular value, else you can also try to do this by writing a routine.
Hope this helps... -
How to mask the parts list on export
I have the following question: I can retrieve drawing from our R&D department created with Pro/eng. Everything is working fine. But you understand that this kind of drawing is very confidential when it concerns high-tech research instruments.
I have noticed that when I export (in u3d), then import to a FrameMaker application, then export in PDF, all the parts are totally exported and listed in the 3D figure. How to mask the internal parts: removing the parts list ?Hi,
I would like to know if there is any feature or a 3D Acrobat version is
available in the market.
With Regards,
Sergius Millet
Manager-Business Development
7th Floor, Alpha Plaza, KP Vallon Road
Kadavanthra, Cochin 682020
Kerala State, INDIA
Tel : +91 484 2317961, 2320280 Fax: +91 484 2321448
Mob: +91 90613 65011
E-mail : [email protected]
web : www.intercadsys.com
Give it all you've got because you never know if there's going to be a next
time -
How to get actual value from LOV list
Like Subject says: How to get actual value from LOV list. Any help will be appreciated.
Thanks.Thanks Shay, I did it with bind variable because I'm not using JSF. Is there any chance to post solution using standard JSTL or HTML expression. I have something like this: LOV displays some Companies names:
<html:select property="UserJobCompanyId"
disabled="${!bindings[\'UserJobCompanyId\'].updateable}"
onchange="submitform();">
<html:optionsCollection label="prompt" value="index" property="UserJobCompanyId.displayData"/>
</html:select>and I want to get CompanyID of selected Company.
Thanks, again. -
How do I move Contacts & Calendar from one User to another User on the same Macbook Pro?
How do I move Contacts & Calendar from one User to another User on the same Macbook Pro? OSX 10.9.5
is this second library in a different account on the computer?
Look at Home Sharing.
iTunes: How to share music and video - http://support.apple.com/kb/HT2688 - about Music Sharing and Home Sharing
Home Sharing Support page - http://www.apple.com/support/homesharing/
iTunes: Setting up Home Sharing on your computer - http://support.apple.com/kb/HT4620
iTunes Home Sharing now works between users on same computer - https://discussions.apple.com/thread/3865597 -
How do I move imove content from one user to another on the same computer?
We bought our Macbook pro about six months ago. We made the mistake of creating two users for it (my husband and myslef) but bow we only log in under my user name. The problem is we originally imported all of our video camera content to his "log in" and now it is in his imovie folder, and not mine. I want to make a movie on my log in with the fottage that we imported to his. So, how do I get video content from one users login on the SAME computer to the other log in users? I cannot seem to move it for the life of me. I did not expect this to be so difficult.
Hi,
You need to log into his account and look, under the Movies folder, for iMovie Events. Inside, you'll find folders with the events names and still further will be the movie itself. Copy each to an external media or use the Shared folder so both accounts can reference them.
Another option would be to attach an external HD and via iMovie (Events Library pane) move them to the new disk. You would preserve the thumbnails and analysis already performed on the videos.
Good luck! -
I have the code to read from a file but my problem is how to prompt the user for the file name at run time.
import java.io.File;
import java.io.FileNotFoundException;
import java.util.InputMismatchException;
import java.util.Scanner;
public class FileRead {
public static void main(String args[]) {
Scanner scan = null;
File file = new File("Results.txt");
String number;
try {
scan = new Scanner(file);
while (scan.hasNext()){
number = scan.next();
System.out.println(number);}
catch (FileNotFoundException ex1){
System.out.println("No such file");
catch (IllegalStateException ex2){
System.out.println("Did you close the read by mistake");
catch (InputMismatchException ex){
System.out.println("File structure incorrect");
finally{
scan.close();}
}Any hints would be greatly appreciated. Thank you in advanceI have read through some of the tutorials that you have directed me too and they are very useful, thank you. however there are still a few things that i am not clear about. I am using net beans 5.0 I have placed a text file named Results.txt into the project at the root so the program can view it.
When I use the code that you provided me with, does it matter where the file is, or will it look through everywhere on the hard drive to find a match?
This code compiles but at run time it comes up with this error
run-single:
java.lang.NoClassDefFoundError: NamedFile
Exception in thread "main"
Java Result: 1
BUILD SUCCESSFUL (total time: 3 seconds)
import java.util.Scanner;
import java.io.*;
class NamedFileInput
public static void main (String[] args) throws IOException
int num, square;
// this Scanner is used to read what the user enters
Scanner user = new Scanner( System.in );
String fileName;
System.out.print("File Name: ");
fileName = user.nextLine().trim();
File file = new File( fileName ); // create a File object
// this Scanner is used to read from the file
Scanner scan = new Scanner( file );
while( scan.hasNextInt() ) // is there more data to process?
num = scan.nextInt();
square = num * num ;
System.out.println("The square of " + num + " is " + square);
}his is the code that i used. It is the same as the code you posted for me (on chapter 23 I/O using Scanner and PrintStream) Sorry im just really stuck on this!! -
How to find the user exits and BADIS from SPRO
Hi all,
please let us know how to find the User exits or BADIS for an application from SPRO.
Regards,
MadhaviHi Varisetty,
Finding user exits and BAdis from SPRO can be cumbsersome. In most instances you know the standard SAP program and want to check (find) an exit called in the flow of the transaction. You can do this as follows:
For User Exit:
Put "/h" in the command box (to start debugging)
Execute your transaction
When you enter debugging - put a breakpoint at statement
CALL CUSTOMER-FUNCTION
the control will stop at all calls to User Exits
For BAdi (it's simpler)
Go to class CL_EXITHANDLER in SE24
Enter method GET_INSTANCE
Put a breakpoint in this method
Run your standard transaction - control will stop at all BAdis called within the flow since this method is used to check BAdi implementations before invoking them
Also, if you want to find enhancements by package - go to SE80, enter the package and check function groups starting with X - those contain function exits (conventional user exits). For BAdis in a package, there is normally a separate tree node (under the package) for Enhancements hence clearly identifiable.
Cheers,
Adi -
How to restrict the user from making any changes in Sales order- item level
Hi to all
How to restrict the users from making any changes in sales order at item level if the same sales order is released by senior user through status profile.
Regards
Anish Parikh
Edited by: anish parikh on Jan 24, 2008 5:16 AMHi Anish,
This can be achieved through the roles and authorization.
This can be done through the basis team. they can create user profiles and roles.
For the roles they assign some transaction codes so that they can view the only assigned tr. codes.
Like that ur requirement can be done.
Also u can prevent the user to change any fields in the sales order screen (VA02). for that please modify the authorisations.
Hope i answers.
Reward points if useful.
Edited by: kaleeswaran bhoopathy on Jan 24, 2008 9:57 AM -
How to stop the users from changing the Decimal in SAP
How to stop the users from changing User Profile
Hai,
It is not possible to restrict SU3 to display, because it has only S_TCODE has the authorization object.
If you really want to restrict users from changing their profile you have to remove the SU3 access and give SU1 or SU2 which gives access only to Personnel details and Parameters.
Hope this helps.
Regards,
Yoganand.V -
How to restrict the user to enter only numeric values in a input field
How to restrict the user to enter only numeric values in a input field.
For example,
i have an input field in that i would like to enter
only numeric values. no special characters,alphabets .
reply ASAPHi Venuthurupalli,
As valery has said once you select the value to be of type integer,once you perform an action it will be validated and error message that non numeric characters are there will be shown. If you want to set additional constraints like max value, min value etc you can use simple types for it.
On the project structure on left hand side under local dictionary ->datatypes->simple types create a simple type of type integer
The attribute which you are binding to value property ;make its type as simple type which you made
Hope this helps you
Regards
Rohit -
How can i get all values from jtable with out selecting?
i have one input table and two output tables (name it as output1, output2). Selected rows from input table are displayed in output1 table. The data in output1 table is temporary(means the dat wont store in database just for display purpose).
Actually what i want is how can i get all values from output1 table to output2 table with out selecting the data in output1 table?
thanks in advance.
rajaYou could set the table's data model to be the same:
output2.setModel( output1.getModel() ); -
How to check if all values from a dataset has come to an internal table
How to check if all values from a dataset has come to an internal table ?
Hi,
After OPEN DATASET statement check if sy-subrc = 0 if its success then proceed with split statement and save the dataset values into a internal table and while debugging the internal table you will find that whether all values get into internal table.
Checking sy-subrc after OPEN DATASET statement is must to fill up the values in the internal table.
For e.g.
OPEN DATASET p_inpfile FOR INPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-subrc NE 0.
WRITE :/ 'No such input file' .
EXIT.
ELSE.
READ DATASET p_inpfile INTO loc_string.
IF sy-subrc NE 0.
EXIT.
ELSE.
CLEAR loc2.
*Spliting fields in the file-
REPLACE ALL OCCURRENCES OF '#' IN wa_string WITH ' '.
SPLIT wa_string AT const INTO loc2-pernr
loc2-werks
loc2-persk
loc2-vdsk1.
Hope you get some idea.
Thanks,
Sakthi C -
Hi,
How do I return two values from a
stored procedure into an "Execute SQL Task" please? Each of these two values need to be populated into an SSIS variable for later processing, e.g. StartDate and EndDate.
Thinking about stored procedure output parameters for example. Is there anything special I need to bear in mind to ensure that the SSIS variables are populated with the updated stored procedure output parameter values?
Something like ?
CREATE PROCEDURE [etl].[ConvertPeriodToStartAndEndDate]
@intPeriod INT,
@strPeriod_Length NVARCHAR(1),
@dtStart NVARCHAR(8) OUTPUT,
@dtEnd NVARCHAR(8) OUTPUT
AS
then within the SSIS component; -
Kind Regards,
Kieran.
Kieran Patrick Wood http://www.innovativebusinessintelligence.com http://uk.linkedin.com/in/kieranpatrickwood http://kieranwood.wordpress.com/Below execute statement should work along the parameter mapping which you have provided. Also try specifying the parameter size property as default.
Exec [etl].[ConvertPeriodToStartAndEndDate] ?,?,? output, ? output
Add a script task to check ssis variables values using,
Msgbox(Dts.Variables("User::strExtractStartDate").Value)
Do not forget to add the property "readOnlyVariables" as strExtractStartDate variable to check for only one variable.
Regards, RSingh -
How do I pass input values from a html page to a jsf page
hi,
In my project,for front view we have used html pages.how can I get input values from that html page into my jsf page.for back end purpose we have used EJB3.0
how can I write jsf managed bean for accessing these entities.we have used session facade design pattern and the IDE is netbeans5.5.
pls,help me,very urgent
thanx in advanceSimplest way is to rewrite html page into jsf page.
You can use session bean in your managed bean like this:
import javax.naming.Context;
import javax.naming.InitialContext;
public class ManagedBean {
private Context ctx;
private Object res;
// session bean interface
private Service service;
public ManagedBean() {
try{
ctx = new InitialContext();
res = ctx.lookup("Service");
service = (Service) res;
catch(Exeption e){
}Message was edited by:
m00dy
Maybe you are looking for
-
Editing Loop Start and End times via automation / MIDI controllers?
I'm trying to play a sample in EXS24 and have the Sample Start, Loop Start and End times manipulated over the course of the song. I've tried to open up the EXS sample editor, click on the numerical value of the Loop Start, and then attempt to Learn A
-
Error Message when Installing Itunes 9.0.1
When Installing Itunes 9.0.1 I received the following error message "The systetm extension "/System/Library/Extensions/CDSDAudioCaptureSupport.Kext" was installed improperly and cannot be used. Please try reinstalling it, or contact the product'svend
-
ABAP WD, Clear select options
Hi all, I have 2 select options in my web dynpro and I want to clean the value of the second select options when the first select options is selected. I have tried it using: (m_handler: type ref IF_WD_SELECT_OPTIONS) DATA: i_it_range_table TYPE
-
I never save passwords - never have, never will. Using evil IE, Gmail works correctly in that it prompts me for ID and password for each new browser instance. Yet when I open gmail with FF, it goes straight to my inbox without prompting for ID or pas
-
[SOLVED] - Openbox thunar and icons
Hi, How do I change the icons in thunar? running openbox! Last edited by ftornell (2009-11-09 20:53:42)