How to mass deploy Windows InTune client software with GPO

I have been looking for mass deploy Windows InTune client software. The only option that I had was with GPO. As we know the exe is not possible to deploy with GPO. Ok, we can play arouund with ZAP files or tranform exe to msi. In my opinion this is
rather »walk-around« the »enginering aproach. So, how can we mass deploy InTune client with GPO. We need to extract the msi from exe. The command is »Windows_Intune_Setup.exe /Extract <destination-directory> ». The command extracts exe to x86 and x64
client msi install. Then we can deploy throw GPO. The »WindowsIntune.accountcert« file must be in the same folder share as described in document http://technet.microsoft.com/en-us/library/jj676611.aspx.
I have tested the deployment, and works good.

Hi,
Thanks for your sharing here! And this should be post on the Group Policy forum, I will move it there!
Regards,
Yan Li
Regards, Yan Li

Similar Messages

Deploy Windows Intune client automatically

How to deploy intune client automatically without the letting the user to know about it?
Thanks

By executing Windows_Intune_Setup.exe /? you can get the list of available switches that can be used by Installation. For silent install you should run it with the Quiet Switch.
"Tool Usage:
Windows_Intune_Setup.exe [/Quiet]
Windows_Intune_Setup.exe /Extract <destination-directory>
/Quiet Used to run enrollment package installation in quiet mode.
/Extract Used to extract enrollment packages (Windows_Intune_{X86 ,X64}.msi)
destination Specifies the directory for the extracted package.
/PrepareEnroll Used to prepare the reference machine for automatic enro llment after Windows Setup.
When executed with no switch specified, enrollment package will be run.
e.g.:- Windows_Intune_Setup.exe
e.g.:- Windows_Intune_Setup.exe/Quiet
e.g.:- Windows_Intune_Setup.exe/Extract %temp%
e.g.:- Windows_Intune_Setup.exe/PrepareEnroll"

Associate anyconnect client software with specific profile?

Hi folks,
I want to beta test a new release of the Windows AnyConnect client software with a small number of users. We use the web deployment feature. Is there a way for us to associate a specific version of the client software with a profile? This seems like the easiest way to release the new software to a small group of people.
Thanks
Pat

The only "AutoUpdate" Value in my profile for 3.x is: true
I think if you put the new AC image in flash it's and point to it in the configuration, it's going to update all the clients - not just a specified tunnel or group. I am not 100% on this though.
Is manually installing it in your test environment an option? This is what what we did then exported profile from the firewall and placed it in the directory for the test client.

Microsoft Intune Client Software Installation in Windows Server

Intune Client Softwrae is being installed in client PCs, but can anyone tell me that Microsoft Intune's Client Software can be installed in any ver. of Windows Server? If not then how to install Intune Client Software?

The Microsoft Intone agent can not be installed on any version of Windows server (see also:
http://technet.microsoft.com/nl-nl/library/dn646950.aspx#BKMK_DeviceReqs). The only way to manage your servers is to integrated with ConfigMgr and use the ConfigMgr client.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Mass deployment of Oracle client

What methods are available for mass deployment of the Oracle 9i client runtime? I mean for 100+ PCs at a time. Is there an Oracle-based solution?
My company's preferred method for application deployment is Microsoft SMS 2003. I have tried using two methods so far:
1) Creating an MSI file by using InstallShield AdminStudio and the snapshot process. Then deploy the MSI file with SMS 2003.This only worked on a minority of target PCs. Perhaps I just did it wrong!
2) Creating an Oracle RSP response file for the Oracle Universal Installer and then attempting to get SMS to deploy the whole bundle. I could get the silent install working fine if I manually ran it on individual PCs whilst logged in as an admin, but getting it to deploy with SMS was hopeless.
Has anybody produced a detailed guide on how to mass deploy the client? Or even just some basic tips?!
Any help much appreciated.
Message was edited by:
user461141

MSI files are executed with MSIExec.exe and it comes with a few switches depending on the version. You can check out these links for the respective versions and switches. If you have successfully created .MSI with AdminStudio, you could try these.
For Windows XP Home and Pro
http://216.239.37.104/translate_c?hl=en&u=http://support.microsoft.com/kb/314881&prev=/search%3Fq%3Dwindows%2Binstaller%2Bfor%2BNT4%26hl%3Den%26lr%3D
For Windows 2000 platform
http://216.239.37.104/translate_c?hl=en&u=http://support.microsoft.com/kb/227091/EN-US/&prev=/search%3Fq%3Dwindows%2Binstaller%2Bfor%2BNT4%26hl%3Den%26lr%3D
There are syntax for the NT4 version too which I can't seem to place at the moment. This should be able to force an installation even if it's been installed previously.
Good luck.

Computer stuck on "Installing Microsoft Intune Client Software"

Hi,
One of our computers installed Microsoft Intune again after his harddrive crashed. We remote wiped the specific device from the admin panel. The client installed but never really succesfully finished the installation. We tried to uninstall the agent again
using de admin console and the "ProvisioningUtil /UninstallAgents /WindowsIntune" cmd.
Now the client doesn't appear anywhere in the admin portal, Nor has the device been "enrolled" in the Company Portal-app. The agent reports with it's Icon in the tray (with Hourglass). When hovered above it states "Installing Microsoft Intune
Client Software".
Serveral days has been passed and still it hasn't resolved yet. Can someone help me here?
Note: OS: Windows 8.1 x64
Kind Regards,
UFadmin

Please open a support case and they can help you remove the agents from the machine.
Thanks,
Jon L. - MSFT - This posting is provided "AS IS" with no warranties and confers no rights.

Mass Deployment of Blackberry Link software

Hi.
Are there any guides on how to mass deploy BB Link to my user base? I'd like to know if its possible to preselect certain options for the deployment, such as not to run at windows startup etc
Thanks

Anyone? Do any BB techs monitor this forum?

Deploy Cisco VPN Clinet Software with PCF

HI All,
How do i install the VPN client Software for two factor authentication setup? i need Web Certificate to install and add the PCF ?
AS

Hi,
Based on your description, for this mainly concerns Cisco products, in order to get better help, it’s recommended that we contact vendor support to ask for advice.
Cisco Support Community
https://supportforums.cisco.com/
Besides, for using group policy to deploy software, we need to get the .msi package of software, and then we can follow the procedures described in the following article to
deploy the software.
How to use Group Policy to remotely install software in Windows Server 2008 and in Windows Server 2003
http://support.microsoft.com/kb/816102/en-us
TechNet Subscriber Support
If you are TechNet Subscription user and have any feedback on our support quality, please send your feedback here.
Best regards,
Frank Shen

How do you sync Windows Live Mail Calender with iPhone 4 Calender?

How do you sync Windows Live Mail Calender with iPhone 4 Calender?

Hey donfrombig spring,
Thanks for the question. To setup your Live account on your iPhone, see this article:
iOS: Setting up Hotmail, Outlook, Live, or MSN email accounts
http://support.apple.com/kb/HT1694
Thanks,
Matt M.

How do i sync windows 7 contact list with iphone

How do I sync Windows 7 contact list with iphone?

If both computers are running Lion the easiest way would be to sign up for a free iCloud account and let Apple do it for you via the cloud.

How can i Downgrade Windows 8 to 7 with hp elitepad 900?

how can i Downgrade Windows 8 to 7 with hp elitepad 900? if i connect external dvdrrom is not show on booting option

Most likely because of the UEFI used in Windows 8. It is not by coincidence that this happens. Look at this to help: http://distrowatch.com/weekly.php?issue=20121126#qa
{---------- Please click the "Thumbs Up" to say thanks for helping.
Please click "Accept As Solution" if my help has solved your problem. ----------}
This is a user supported forum. I am a volunteer and I do not work for HP.

How to remove deployed servers at clients after rename

I've set up print management with several printers, and deployed the printers using GPO to clients (mostly XP and 7).
All works well, but for some reason, I had to change the naming convention of the deployed printers.
I simply opened Print Management, and renamed the printer. Afterwards, I removed the old printer names from GPO and deployed the new ones.
Again, all works well. BUT, the old printers are still listed on the client, and I can't seem to find an automatic and clean way to remove them.
Where did I go wrong? Or if that's not the case, how do I resolve this?

Hi,
Regarding your request, maybe we could use script to remove these old printers. For details about the script, I suggest you could refer to the following article.
Hey, Scripting Guy! How Can I Use Windows PowerShell to Remove Old Printer Connections, List Printers, and Set New Default Printers?
https://blogs.technet.com/b/heyscriptingguy/archive/2009/05/20/how-can-i-use-windows-powershell-to-remove-old-printer-connections-list-printers-and-set-new-default-printers.aspx
Remove network printer in a logon script
http://social.technet.microsoft.com/Forums/windowsserver/en-US/795b49ce-8cb3-4fbf-835b-faac62266e01/remove-network-printer-in-a-logon-script
Hope this helps.
Regards,
Andy Qi
Andy Qi
TechNet Community Support

How do I use HP Photosmart 8150 software with Windows 7?

I recently bought a new PC that uses Windows 7. When I purchased my HP Photosmart 8150 several years ago (and used Windows XP), it came with software that could be used for importing pictures, editing, cropping, printing different sizes, etc. That software is not compatible with Windows 7. Is there a patch or upgrade out there that I can download to get this up and running again?

Your printer can be used with Windows 7 as the basic driver is included in the operating system. Some older printers are not compatible with Windows 7 at all.
If you want a printer with software that has all the bells and whistles you will, unfortunately, have to upgrade to a newer model.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Windows 7 client - compatible with BPC 5.1?

We are running BPC 5.1, SP8. One of our users bought a new laptop which came with Windows 7 installed. We are having difficulty installing the BPC for Office client (getting a message that "you are not authorized to install BPC for Office" even when an administrator tries the install).
Can a Windows 7 client be used in a BPC 5.1 environment?
If so, how can we get the software installed on the client?
Barb

Hi Barb,
As you understand, there is no option currently. Nevertheless, I requested you for BPC 7.0, since it is under SAP support. The OS on a system can be changed without any hassles. The user can definitely go with Windows Vista and this will be very well supported by BPC 7.0. So, changing the OS in a system is not big a challenge. However, we should have the support from SAP for our versions of product, which is not available for 5.1 anymore. Thats the reason I requested you to go with 7.0. BPC 7.5 is scheduled to be released somewhere in June or July.
Hope this helps.

Jax-ws deployed in standalone client fails with nullpointerexception

I have a project which has deployed successfully as a standalone client with deployed jar files wlfullclient.jar, etc. When I add the jax-ws functions that I require, the deployed client fails with a nullpointerexception that is generated from the constructor of the Service class. The project runs successfully within the JDeveloper 11.1.1.5 environment and on a weblogic 10.3 server platform, but fails when I deploy as a standalone client with the wlfullclient.jar. I'm using JDK 1.6.0_24. In testing, the error occurs when I replace the {WLHome}\server\lib\weblogic.jar entry in the classpath with the wlfullclient.jar.
I tested from another angle by creating my jax-ws functions in a standalone deployment, and it works successfully communicates with the webservices. No additional entries on the classpath besides my deployed jar. I then added to my deployment a simple JMS context lookup:
Hashtable ht = new Hashtable();
ht.put(Context.INITIAL_CONTEXT_FACTORY, contextFactoryProvider);
ht.put(Context.PROVIDER_URL, urlString);
Context context = new InitialContext(ht);
This test runs without error in the JDeveloper environment. As soon as I add the wlfullclient.jar in the standalone environment, I get the following exception:
Exception in thread "main" java.lang.NoClassDefFoundError: com/sun/xml/ws/spi/ProviderImpl
at java.lang.ClassLoader.defineClass1(Native Method)
at java.lang.ClassLoader.defineClassCond(ClassLoader.java:630)
at java.lang.ClassLoader.defineClass(ClassLoader.java:614)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:141)
at java.net.URLClassLoader.defineClass(URLClassLoader.java:283)
at java.net.URLClassLoader.access$000(URLClassLoader.java:58)
at java.net.URLClassLoader$1.run(URLClassLoader.java:197)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
at java.lang.ClassLoader.loadClass(ClassLoader.java:305)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
at java.lang.ClassLoader.loadClass(ClassLoader.java:246)
at javax.xml.ws.spi.FactoryFinder.safeLoadClass(FactoryFinder.java:150)
at javax.xml.ws.spi.FactoryFinder.newInstance(FactoryFinder.java:30)
at javax.xml.ws.spi.FactoryFinder.find(FactoryFinder.java:90)
at javax.xml.ws.spi.Provider.provider(Provider.java:83)
at javax.xml.ws.Service.<init>(Service.java:56)
Interestingly, there is a class com/sun/xml/internal/ws.spi/ProviderImpl in the {JAVA_HOME}/jre/lib/rt.jar file, and I suppose this is what is used by the jax-ws classes when the wlfullclient.jar is not present on the classpath.
So, what is it that I am missing in how to get the jax-ws classes and the jms classes to work in the standalone deployment environment (outside of the JDeveloper environment).
Edited by: user3653687 on Jan 9, 2012 1:38 PM
Edited by: user3653687 on Jan 9, 2012 2:49 PM

Here is how I solved this problem to execute the application from a jar file (using Oracle Fusion Middleware 11.1.1.5.0 distribution). The key seems to be to extract the contents of the wseeclient.zip file into the same directory as the wlfullclient.jar and ws.api_1.1.0.0.jar files and then ensure that these 2 jars are on the classpath.
In JDeveloper, create a project that has the jms/jax-ws classes.
Put the following text entries to form the classpath (along with other dependent jars, e.g. org.eclipse.persistence...) into a file which will be included in the manifest for the client jar. Be sure to separate entries with a space.
lib/wlfullclient.jar lib/wseeclient.jar lib\ws.api_1.1.0.0.jar lib\org.eclipse.persistence_1.1.0.0_2-1.jar
In the Edit Deployment Profile Properties, select Include Manifest File, specify the main class to execute, and Add the classpath file to be included in the manifest.
Deploy the jar file.
In a deployment area, create the directory that will contain all the classpath jars (e.g. ./lib).
Within the directory ./lib, extract all files from wseeclient.zip (found in {weblogic home}/server/lib)
Copy wlfullclient.jar into the directory ./lib from the {weblogic home}/server/lib
Copy ws.api_1.1.0.0.jar into the directory ./lib from {oracle middleware home}modules
Copy org.eclipse.persistence_1.1.0.0_2-1.jar (for jaxb support) itno the directory ./lib from {oracle middleware home}/modules
Copy the deployed client jar to the deployment area and execute, e.g.:
java -jar ClientTest.jar myArguments

How to mass deploy Windows InTune client software with GPO

Similar Messages

Maybe you are looking for