How to match mm and fi value
HI
I have finished goods material, where my mm side stock value say rs 50,000 (in mb5b),
how to compare the FI side values?? in whch tcode?
i couldn't get the exact values in mb5l ... where to check ?? and how to match mm and fi to have similar value
Hi,
The variance due to
-You have entered postings to the stock account manually.
-The stock account includes not only stock postings, but also other postings. In this case, you should check the account determination in the Customizing for Valuation and Account Assignment. Make sure that the stock accounts are used solely for the transaction key BSX (stock postings).Check Account Determination
-The account assignment for the stock accounts (transaction key BSX) was changed .
Common selection parameters to execute MB5L transaction are
-Company Code
-Valuation Area( if your company code have different valaution area that depents on the way you want to get the output)
-Period ( 3 options you have current period, previous period and previous year)
-Below that you have different output options to select
Then execute (F8)
The list with overview of stock by account with MM value and FI value. The values of MM and FI must be the same.
For a good practise don not post any adjustment accounts to the stock accounts.
Regards,
Krishna Kishore
Similar Messages
-
How to separate debit and credit values in gl statement report (daywise)
hi
experts,
i have report.
selection criteria is
chars of account.
gl account
date .
how to separate debit and credit values in gl statement?.(i know there is a indicator shkzg).
but send me code.
op
date, total credit,total debit , balances.
also calculate opening and closing balance.
u created such type of report then plz help me.
thanks®ards.\
ajay.Hi,
Usually it can be determined using the field shkzg. If it contain 'S' its debit and if it contains 'H' then its credit.
Before showing the amount you need to do like;
IF wa_gl-shkzg = 'H'.
wa_gl-dmbtr = wa_gl-dmbtr * (-1). " dbmtr - amount
ENDIF.
This will solve your problem.
Regards
Karthik D
Edited by: Karthik D on Jun 3, 2009 12:29 PM -
How to fetch old and new value from of a field(non-key) from LOGDATA
Hello SDNers,
i m fecthing LOgdata from dbtlog table[in our case the log is not getting Updated in CDHDR and CDPOS table]
i m using the same logic as it is used in RSVTPROT
but the problem is
" IT is fetching OLD and NEW VALUE after Update from same field LOGDATA of dbtlog table BUT when i used same logic it is FEtching only OLD VALUEs,
CAN U GUYS PLS TELL ME HOW TO FECTH OLD VALUE and NEW VALUE of a PArticular field(non-key field, fecthing key field is not an issue) From LOGDATA field of DBTLOG.
thx a lot in advance
Regards
KuldeepHi,
May be this link is useful to you.
a® -
Trigger how to get new and old value for nested table column?
Hi,
I have created a nested table based on the following details:
CREATE TYPE typ_item AS OBJECT --create object
(prodid NUMBER(5),
price NUMBER(7,2) )
CREATE TYPE typ_item_nst -- define nested table type
AS TABLE OF typ_item
CREATE TABLE pOrder ( -- create database table
ordid NUMBER(5),
supplier NUMBER(5),
requester NUMBER(4),
ordered DATE,
items typ_item_nst)
NESTED TABLE items STORE AS item_stor_tab
INSERT INTO pOrder
VALUES (800, 80, 8000, sysdate,
typ_item_nst (typ_item (88, 888)));
Now I would like to create a trigger on table pOrder for after insert or update or delete
and I would like to track the new and old value for the columns inside nested table.
Can anybody direct me how to do it?
I would like to know the sytax for it like:
declare
x number;
begin
x := :new.nestedtablecolumn;--how to get the new and old value from nested table columns
end;
Hope my question is clear.
Thanks,
LavanHi,
Try like this:
CREATE OR REPLACE TRIGGER PORDER_I
BEFORE INSERT
ON PORDER
REFERENCING OLD AS old NEW AS new
FOR EACH ROW
DECLARE
items_new typ_item_nst;
ordid_NEW NUMBER;
BEGIN
FOR i IN :new.items.FIRST .. :new.items.LAST LOOP -- For first to last element
DBMS_OUTPUT.PUT_LINE(':new.items(' || I || ').prodid: ' || :new.items(I).prodid );
DBMS_OUTPUT.PUT_LINE(':new.items(' || I || ').price: ' || :new.items(I).price );
END LOOP;
END;Regards,
Peter -
How to calculate subtol and total values in alv.
Hi expert,
I want to calculate the subtol and total values in alv as follows,
example:
month: Jan Fer Mar Apr
-50 -30 40 -10
-20 -13 -12 -10
subtotal -70 -43 28 -20
-10 -10 -10 -10
-10 -31 -15 -10
subtotal -20 -41 -25 -20
total -90 -84 3 -40
when i put '-' in front of the month,i define the month type c,
and when the type is c,it cann't calculate the subtotals and totals.
how can i do can make the layout like the example.
thanks...
Edited by: Heum Kim on Aug 25, 2008 3:54 AMThe below code is not generic one. I am just looking for generic one. You try to fix it using the similiar approach.
REPORT ZTEST_ALV_DEC.
data: fcat type lvc_s_fcat,
tfcat type lvc_t_fcat.
data: begin of itab occurs 0,
carrid(10),
quan type DEC_16_02_S,
end of itab.
itab-carrid = 'AA'.
itab-quan = '-10000.00'.
append itab.
fcat-fieldname = 'QUAN'.
fcat-tabname = 'ITAB'.
fcat-decimals_o = 2.
fcat-edit_mask = 'V__,___.__'. "This is not generic
append fcat to tfcat.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY_LVC'
EXPORTING
I_CALLBACK_PROGRAM = sy-repid
IT_FIELDCAT_LVC = tfcat
TABLES
t_outtab = itab
EXCEPTIONS
PROGRAM_ERROR = 1 -
Hi Guys,
I am using DB2 database in SSRS. I have to pass Single Value and Multi Value Parameters. I tried with Select * From DB2Table Where
Column=@PRM_Name Or Select * From DB2Table Where
Column=:PRM_Name . It is not working and throwing error. Please help me out.
Connection Details: ODBC
Thanks Shiven:)Hi SKM,
So you mean to say that Go to DataSource->Add Dataset-> Query Type-Text-> Under Query:
click on fx (Expression)-> Write this expression
For Single Value Parameter:
="SELECT customer_name, telephone_number, address1, address2, city from MyTable
WHERE city = '" + Parameters!City.Value + "'"
OR
="SELECT customer_name, telephone_number, address1, address2, city from MyTable
WHERE city = '" & Parameters!City.Value & "'"
Keep it in mind if Parameter is String then
It should be in Single quote ''.
Like
="SELECT customer_name, telephone_number, address1, address2, city from MyTable WHERE city
='Hyderabad' "
For Multivalu Parameter:
="SELECT EmployeeID, FirstName, LastName, LoginID FROM SHIVEN.AUDIT Where FirstName
in ('" + REPLACE(JOIN(Parameters!City.Value,","),",","','") + "')"
NOTE:
If your Parameter is Single Value Parameter and You want to enter string values with Coma (,)
separated (Like Hyderabad, Chennai, Delhi).
In this case, you have to use below expression.
="SELECT customer_name, telephone_number, address1, address2, city from MyTable
WHERE city IN ('" + REPLACE(Parameters!City.Value ,",","','") + "')"
OR
="SELECT customer_name, telephone_number, address1, address2, city from MyTable
WHERE city IN ('" & REPLACE(Parameters!City.Value ,",","','") & "')"
In above expression: Replace will replace all , with ‘,’ and city IN (‘Hyderabad’, ‘Chennai’,
‘Delhi’) will not throw any error.
Note: You have to write expression in one line in Expression editor for dataset
query
Thanks It is working fine but it is tough job if query is big.
Hi S kumar,
The above approach we use when we have source like DB2, becasue DB2 has some syntactical differences to pass multivalue paramaeter. I tested and it works good, if i am mentioning the query in above format by using Fx button while creating dataset.
but if we want fetch data from view which exist in DB2 and we need to call db2 view in SSRS and pass multivalue parameter in a way we did above then could you please mention the steps and way to achieve this.
Thanks in advance! -
How to get Max and Min value entered in a DOS console?
Hi there? I wanted to get the Maximum and Minimum value that I entered in a console and displays it. This is using the java.lang.Math class and using it's method max and main. please help. thanks - new to java
Sounds like you need very basic advice: Start with the tutorials: http://java.sun.com/docs/books/tutorial/index.html
And if the algorithm is the problem:
- Make two variables that hold the current maximum and minimum value
- whenever a value is entered, compare it with the minimum, if it is smaller, set the minimum to that value
- ditto with maximum
at the end the two variables contain the maximum and minimum values. -
How to find previous and next value of a cursor?
Im trying to do an update to a table.
I have a set of rows fetched in a cursor. Now i loop through the cursor and update a field in the table.
for certain condition alone i need to fetch the previous value in the cursor and update the table with that.
can anyone let me know if i can fetch the previous and next value of a cursor for this DML operation?
Thanks in advance.You can do it via PL/SQL routine.
-
How to get key and text value of field "TNDRST" in VTTK from R/3 into BI
There is one field call "TNDRST(Tender Status)" in SAP table VTTK in R/3. We can find key value, but we are unable to find text for this field in VTTK. However we can see text value if we double click domain:TNDRST and go to value range.
Questions, how to get key value and text of TNDRST together in BI. Do we need to create a master data source for TNDRST text information in R/3 and extracting into BI, if yes, how to? Are there any easy way to do it??
Thanks,
SudreeHi Sudree,
You need to create a generic Text Datasource to extract this information into BI System.
1. Create a generic DS based on Table: DD07T
2. The fields should be put in the extract structure.
DOMNAME (Make this as Selection in the DS ) -
Filter the Domain Name
DOMVALUE_L -
Key Value of Tender Status
DDTEXT -
Text / Description
DDLANGUAGE -
Language
3. DD07T is the table with all the Domain names & their values, so in the Infopackage enter the Selection Value for DOMNAME as 'TNDRST' and then run it.
Or you can create a view out of this table based on DOMNAME filter as 'TNDRST'.
Regards,
Chathia. -
How to find index and minimium value in ArrayList?
Hi,
I got an ArrayList numbers that contains the following....
[4,5,4,3,3,4,4,3,6,5]
How do I go through the ArrayList numbers, such that I can get the
minimum value and it's index number in the arrayList?
For example, the above arrayList got three min number of 3, I will
get either one of the 3 and also get it's index of 3, 4 or 7.
The ArrayList number can have another number of records inside it.
Please advice.
Thank you.Please do not cross post:
http://forum.java.sun.com/thread.jsp?thread=471261&forum=31&message=2177088
Besides, I would not forcibly qualify this topic as an advanced one. -
How to check old and new value for a text item attached to a lov?
Hi,
I am new to Forms.
I need your help in following.
I have a form which has a text item which is attached to a LOV. I want to track what changes are being done using that form. So i want to know what was old value and what is new value.
I can get the new value as it is there in form field. how can i know what was the old value.
Thanks
Prashant PathakThis is wrong:
name_in(':' ||l_audit_block.field_name)
this is right and will get you the current value of the the item:
name_in('l_audit_block.field_name');
Assuming the name of you block is "l_audit_block" and the name of your item is "field_name".
Please note name_in() returns your current value for an item. In your case this may or may not be the "old" value. I define "old" value as the value it was when it was queried. If that is what you are looking for you need to use the get_item_property() call that Steve described above.
--pat -
How to view variable and constant value
Hi there,
I try to view a variable in sql plus command line and oracle xe object browser. The following is a small code to assign a value to a variable from an existing column name id that has value 4567 from table airplane. I'm a newbie, so pardon my ignorance:
declare new_num number;
begin
select id into new_num from airplane where id=4567;
end;
Questions:
1. Anything wrong with the code?
2. How can I view it via sql plus command line?
3. Can I view it from Oracle XE object browser gui?
Regards,
Valerieyou use variable command to declare my_var as a global variableActually Toon used a BIND variable in his example, see:
http://download.oracle.com/docs/cd/B19306_01/server.102/b14357/ch5.htm#sthref1118
Is this a SQL or PL/SQL command? Bind variables can (should) be used by SQL*Plus and in PL/SQL.
Check the docs.
Can I view it via oracle xe object browser?I have no clue, don't know the 'Oracle XE Object Browser'. -
How to show Min and Max values when another value "changes to a new value"
Hi
If I have this data (generated with this query: SELECT 1 A, 1 B UNION ALL SELECT 2, 1 UNION ALL SELECT 3, 2 UNION ALL SELECT 4, 2 UNION ALL SELECT 5, 1)
A B
1 1
2 1
3 2
4 2
5 1
How can I generate this data (created with this query SELECT 1 Amin, 2 Amax, 1 B UNION ALL SELECT 3, 4, 2 UNION ALL SELECT 5, 5, 1)
Amin Amax B
1 2 1
3 4 2
5 5 1
Thanks.Please post DDL, so that people do not have to guess what the keys, constraints, Declarative Referential Integrity, data types, etc. in your schema are. Learn how to follow ISO-11179 data element naming conventions and formatting rules. Temporal data should
use ISO-8601 formats. Code should be in Standard SQL as much as possible and not local dialect.
This is minimal polite behavior on SQL forums. You also do not know the ANSI/ISO syntax for insertion and you did the old Sybase insertion kludge wrong, that we need keys, etc.
CREATE TABLE Foobar
(foo_seq INTEGER NOT NULL PRIMARY KEY,
glop_score INTEGER NOT NULL);
INSERT INTO Foobar
VALUE
(1,1),
(2,1),
(3,2),
(4,2),
(5,1);
>> How can I generate this data (created with this query SELECT 1 Amin, 2 Amax, 1 B UNION ALL SELECT 3, 4, 2 UNION ALL SELECT 5, 5, 1) <<
This makes no sense; you have the wrong syntax and mixed data types. My guess is:
SELECT MIN(foo_seg), MAX(foo_seq), MAX(glop_score)
FROM Foobar
GROUP BY glop_score
HAVING MIN(glop_score) = MAX(glop_score);
Amin Amax B
1 2 1
3 4 2
5 5 1
--CELKO-- Books in Celko Series for Morgan-Kaufmann Publishing: Analytics and OLAP in SQL / Data and Databases: Concepts in Practice Data / Measurements and Standards in SQL SQL for Smarties / SQL Programming Style / SQL Puzzles and Answers / Thinking
in Sets / Trees and Hierarchies in SQL -
How to get new and old value in an alert?
Hi,
I created one event alert in Oracle Apps on PER_ALL_PEOPLE_F table.My intention is to execute the concurrent program attached to the alert when the user changes last_name fileld of that table.How can i get the :new.last_name and :old.last_name in alert.
Please give valuable solution to this question
Thanks in Advance
Manoj MAs I aware of there is not concept of :old vs :new in alert. since you change last_name which mean it is an update instead of correction then you can get the new effective start_date and do minus - 1 to get the previouse record effective end_date and using that you can get the old last name.
-
How to get field and variable value in oracle
Hi all,
I'm finding very difficulty to get a field value.. In oracle 11i form there is a field name called total accured and it has value 519.. but i'm not able get this .i search in all tables so iwent to help--> tools-->examine--(diagnostic)-->
i get Block :'XYZ' field: "Balance" and value:'519' and search in table shown in help.
Please can anyone help me to get this field and it's value. it is in HRMS.
Thank YouIt may be a derived / calculated field, which is why you might not be finding it in a table.
For information on the last query run (may give a clue) do help -> examine, then change block to "SYSTEM" and Field to "LAST_QUERY".
Also, Help -> Record History will show you the table or view that the data comes from. May also lead to a clue.And this is what is mentioned in the doc referenced above.
Thanks,
Hussein
Maybe you are looking for
-
When STARTING lightroom error 1 but i can't uninstall lightroom
how do i uninstall lightroom on a macbook
-
Adding new field in MM01/MM02/MM03
Hi All, I have a requirement to add a checkbox in MM01 costing2 tab page. I have done the basic configurations like adding a new field in MARC with Append Structure, creating Function group (for subscreen) in SPRO and assigning the same to the respec
-
Print the attachements added in the adobe form
Hi, I added the attachments in the adobe form.But when ever i print this adobe form , i want to make sure that the attachments are also printed in addition to the original adobe form. Is there any automatic way of doign it or any alternatives to avoi
-
Ipad mp4 transfer works on 1/3 of my computers
PC1 win7 working. PC2 win7 not working. PC3 win8 not working. Itunes version 11.2.2.3 on all machines. When I drag on drop the files just nothing happens... no errors.. no pop window.. just nothing happens. I have to bring the files to work on a USB
-
Java Problem with Web Application
Hi Experts I have a new poblem of connexion with my tools ( Web A In fact when I execute my template, I have this error of communication: ERROR JAVA : INCOMING CALL IS NOT AUTORIZED I do a lot of thing like : Create RFC Destination in J2EE Engine. Cr