How to get field and variable value in oracle

Hi all,
I'm finding very difficulty to get a field value.. In oracle 11i form there is a field name called total accured and it has value 519.. but i'm not able get this .i search in all tables so iwent to help--> tools-->examine--(diagnostic)-->
i get Block :'XYZ' field: "Balance" and value:'519' and search in table shown in help.
Please can anyone help me to get this field and it's value. it is in HRMS.
Thank You

It may be a derived / calculated field, which is why you might not be finding it in a table.
For information on the last query run (may give a clue) do help -> examine, then change block to "SYSTEM" and Field to "LAST_QUERY".
Also, Help -> Record History will show you the table or view that the data comes from. May also lead to a clue.And this is what is mentioned in the doc referenced above.
Thanks,
Hussein

Similar Messages

How to get BW-BPS variable value into Visual Basic?

Hello,
Scenario:
Time characteristic 0FISCYEAR has a variable ZVFYEAR. In layout this time characteristic is defined as DATA COLUMN. When user changes VFYEAR variables value i want to get the value of variable into Visual Basic and to format header for table in the layout.
How to get BW-BPS variable value into Visual Basic?
Could you help me?
Thanks in advance.
Best Regards,
Arunas Stonys

Hi,
If i understand your requirments correctly ,you need to read the value of the Variable and Put it on the layout. Here is how i would solve this,
Read the value of the variable using an ABAP program.The logic for this would be to read the variable value and post it on the layout on a cell.You can do this by calling the ABAP program on opening the layout.this can be done using LB_EXIT_FM T-code. Now using the SAP delivered SAPAfterDataPut macro, read the cell in which you have placed the variable values and assign it to the necessary values you want to on the layout.All this will be done before the layout opens.
Hope this helps.
regards
Sai Vishnubhatla

How to get key and text value of field "TNDRST" in VTTK from R/3 into BI

There is one field call "TNDRST(Tender Status)" in SAP table VTTK in R/3. We can find key value, but we are unable to find text for this field in VTTK. However we can see text value if we double click domain:TNDRST and go to value range.
Questions, how to get key value and text of TNDRST together in BI. Do we need to create a master data source for TNDRST text information in R/3 and extracting into BI, if yes, how to? Are there any easy way to do it??
Thanks,
Sudree

Hi Sudree,
You need to create a generic Text Datasource to extract this information into BI System.
1. Create a generic DS based on Table: DD07T
2. The fields should be put in the extract structure.
          DOMNAME (Make this as Selection in the DS ) -
Filter the Domain Name
          DOMVALUE_L -
Key Value of Tender Status
          DDTEXT -
Text / Description
          DDLANGUAGE -
Language
3. DD07T is the table with all the Domain names & their values, so in the Infopackage enter the Selection Value for DOMNAME as 'TNDRST' and then run it.
Or you can create a view out of this table based on DOMNAME filter as 'TNDRST'.
Regards,
Chathia.

How to get the session variable value in JSF

Hi
This is Subbus, I'm new for JSF framewrok, i was set the session scope for my LoginBean in faces-config.xml file..
<managed-bean-name>login</managed-bean-name>
<managed-bean-class>LoginBean</managed-bean-class>
<managed-bean-scope>session</managed-bean-scope> like that...
So all parameter in LoginBean are set in session right ?... for example i used userId is the Parameter...
Now i need to get the the userId parameter from that session in my another JSP page.. how i get that ?..
Already i tried
session.getAtrribute("userId");
session.getValue("userId");
but it retrieve only "null" value.. could u please help me.. it's very urgent one..
By
Subbus

Where i use that..is it in jsp or backend bean...
simply i use the following code in one backend bean and try to get the value from there bean in the front of jsp page...
in LogoutBean inside
public String getUserID()
     Object sessionAttribute = null;
     FacesContext facescontext=FacesContext.getCurrentInstance();
     ExternalContext externalcontext=facescontext.getExternalContext();
     Map sessionMap=externalcontext.getSessionMap();
     if(sessionMap != null)
     sessionAttribute = sessionMap.get("userId");
     System.out.println("Session value is...."+(String)sessionAttribute);
     return (String)sessionAttribute;
     return "fail";
JSP Page
<jsp:useBean id="logs" scope="session" class="logs.LogoutBean" />
System.out.println("SS value is ...."+logs.getUserID());
but again it retrieve only null value.. could u please tell me first how to set the session variable in JSF.. i did faces-config only.. is it correct or not..
By
Subbus

How to get Max and Min value entered in a DOS console?

Hi there? I wanted to get the Maximum and Minimum value that I entered in a console and displays it. This is using the java.lang.Math class and using it's method max and main. please help. thanks - new to java

Sounds like you need very basic advice: Start with the tutorials: http://java.sun.com/docs/books/tutorial/index.html
And if the algorithm is the problem:
- Make two variables that hold the current maximum and minimum value
- whenever a value is entered, compare it with the minimum, if it is smaller, set the minimum to that value
- ditto with maximum
at the end the two variables contain the maximum and minimum values.

Trigger how to get new and old value for nested table column?

Hi,
I have created a nested table based on the following details:
CREATE TYPE typ_item AS OBJECT --create object
(prodid NUMBER(5),
price NUMBER(7,2) )
CREATE TYPE typ_item_nst -- define nested table type
AS TABLE OF typ_item
CREATE TABLE pOrder ( -- create database table
ordid NUMBER(5),
supplier NUMBER(5),
requester NUMBER(4),
ordered DATE,
items typ_item_nst)
NESTED TABLE items STORE AS item_stor_tab
INSERT INTO pOrder
VALUES (800, 80, 8000, sysdate,
typ_item_nst (typ_item (88, 888)));
Now I would like to create a trigger on table pOrder for after insert or update or delete
and I would like to track the new and old value for the columns inside nested table.
Can anybody direct me how to do it?
I would like to know the sytax for it like:
declare
x number;
begin
x := :new.nestedtablecolumn;--how to get the new and old value from nested table columns
end;
Hope my question is clear.
Thanks,
Lavan

Hi,
Try like this:
CREATE OR REPLACE TRIGGER PORDER_I
BEFORE INSERT
ON PORDER
REFERENCING OLD AS old NEW AS new
FOR EACH ROW
DECLARE
items_new typ_item_nst;
ordid_NEW NUMBER;
BEGIN
FOR i IN :new.items.FIRST .. :new.items.LAST LOOP -- For first to last element
DBMS_OUTPUT.PUT_LINE(':new.items(' || I || ').prodid: ' || :new.items(I).prodid );
DBMS_OUTPUT.PUT_LINE(':new.items(' || I || ').price: ' || :new.items(I).price );
END LOOP;
END;Regards,
Peter

How to get new and old value in an alert?

Hi,
I created one event alert in Oracle Apps on PER_ALL_PEOPLE_F table.My intention is to execute the concurrent program attached to the alert when the user changes last_name fileld of that table.How can i get the :new.last_name and :old.last_name in alert.
Please give valuable solution to this question
Thanks in Advance
Manoj M

As I aware of there is not concept of :old vs :new in alert. since you change last_name which mean it is an update instead of correction then you can get the new effective start_date and do minus - 1 to get the previouse record effective end_date and using that you can get the old last name.

How to get this sql query value in oracle query?

Hi all,
i am using one query in sql that is
select @EarlyLeaversMin = DATEDIFF(Minute,@OutTime,@nshiftmax)
suppose first line query is getting 60 minutes.
select @EarlyLeaversMin1=DATEDIFF(Minute,@temphrs,@ShiftTime)
second line query is also getting 60 minutes
set @EarlyLeaversMin=@EarlyLeaversMin+@EarlyLeaversMin1+1
and now here it's calculating both variable minutes and storing in @earlyleaversmin that should store like 60+60+1=121 mintes
select @EarlyLeaverstimeformat = CONVERT(char(8),Dateadd(n,@EarlyLeaversMin,0),108)
so now it will store in this query that value in this format : 01:21:00
can i use the same which it's happening here??
thanks

Oracle handles dates and time very differently from SQL Server (as I gather others on this forum have already tried to explain to you).
Anyway, Oracle does not have a TIME datetype, but what it does have are INTERVALs. In this case you would use INTERVAL DAY TO SECOND. It's not completely clear what you mean by "store in this query that value" but we can use INTERVALS as both table columns and PL/SQL variables.
So your first query would be something like this:
declare
    interval_var INTERVAL DAY TO SECOND;
begin
     select (nshiftmax - outtime) day to second
     into interval_var
     from whatever;We can do arithmetic with interval variables.
     select (nshiftmax - outtime) day to second + (shifttime - temphrs) day to second
     into interval_var
     from whatever;To add a hard-coded interval such as 1 minute you can use this functionality:
     interval_var := interval_var + to_dsinterval('0 0:1:0');There's loads of info in the Oracle documentation. [url http://docs.oracle.com/cd/B28359_01/server.111/b28286/sql_elements001.htm#sthref115]Find out more.
Cheers, APC

How to get dynamic check box value in NW Mobile 7.1

Hi,
i have 5 rows it contains dropdown and checkbox in a row.when i click update button i need the values of checkbox.How to get?
Regards,
Kanagaraj.

Hi Vidyadhar,
I have dropdown in first page.based ondropdown value selected navigating to next page.In that i am using row repeater it has label,checkbox and dropdown.here i need to know whether the check box is checked or not while clicking update button.
Drow down value also not able to get.
How to get Checkbox and dropdown values?
can u provide some sample codes??
Regards,
Kanagaraj.

How to get the current month value for a customer exit variable?

How to get the current month value for a customer exit variable?
And also if we have an InfoObject with date value (including date, month, year), then how to derive the month value from this date type of Char.?
Thanks!

Hi Kevin,
Check here........
Re: Customer Exist for "From Current Date To Month End"
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/25d98cf6-0d01-0010-0e9b-edcd4597335a
Cal month
Regards,
Vijay.

How to put the column name and variable value in the alert message.

Dear,
how can i put the column name and variable value in the alert message text. i want to display an alert which tell the user about the empty textboxes. that these textboxes must be filled.
Regards:
Muhammad Nadeem
CHIMERA PVT. LTD.
LAHORE
[email protected]

Hello,
The name of the item that fires the current trigger is stored in the :SYSTEM.TRIGGER_ITEM system variable.
The value contained in this item can be retrived with the Name_In() built-in
value := Name_In( 'SYSTEM.TRIGGER_ITEM') ;
LC$Msg := 'The item ' || :SYSTEM.TRIGGER_ITEM || ' must be entered' ;
Set_Alert_Property('my_alert_box', ALERT_MESSAGE_TEXT, LC$Msg ) ;
Ok := Show_Alert( 'my_alert_box' ) ;
...Francois

How to get a list of values used in the WHERE filter of stored procedures and functions in SQL Server

How can I get a list of values (one or more) used in the WHERE filter of stored procedures and functions in SQL Server?
How can get a list of values as shown (highlighted) in the sample stored procedure below?
ALTER PROC [dbo].[sp_LoanInfo_Data_Extract] AS
SELECT   [LOAN_ACCT].PROD_DT,
              [LOAN_ACCT].ACCT_NBR,
              [LOAN_NOTE2].OFCR_CD,
              [LOAN_NOTE1].CURR_PRIN_BAL_AMT,
              [LOAN_NOTE2].BR_NBR,
INTO #Table1
FROM
                dbo.[LOAN_NOTE1],
                dbo.[LOAN_NOTE2],
                dbo.[LOAN_ACCT]
WHERE
                [LOAN_ACCT].PROD_DT = [LOAN_NOTE1].PROD_DT
                and
                [LOAN_ACCT].ACCT_NBR = [LOAN_NOTE1].ACCT_NBR
                and
                [LOAN_NOTE1].PROD_DT = [LOAN_NOTE2].PROD_DT
                and
                [LOAN_NOTE1].MSTR_ACCT_NBR = [LOAN_NOTE2].MSTR_ACCT_NBR
                and
                [LOAN_ACCT].PROD_DT = '2015-03-10'
                and
                [LOAN_ACCT].ACCT_STAT_CD IN
('A','D')
                and
                [LOAN_NOTE2].LOAN_STAT_CD IN
('J','Z')
Lenfinkel

Hi LenFinkel,
May I know what is purpose of this requirement, as olaf said,you may parse the T-SQL code (or the execution plan), which is not that easy.
I have noticed that the condition values in your Stored Procedure(SP) are hard coded and among them there is a date values, I believe some day you may have to alter the SP when the date expires. So why not declare 3 parameters of the SP instead hard coding?
For multiple values paramter you can use a
table-valued parameter. Then there's no problem getting the values.
If you could elaborate your purpose, we may help to find better workaround.
Eric Zhang
TechNet Community Support

How to get field in Report

Hi all,
Please tell me how to get field from following path
GO to MSC2N --
insert material, batch , plant , storage location
Now select classification...
there is box containing 'characsteristics descr ' & value
so how to get that value
I think that values are store in table cawn but i wont found any link to get that
Correct ans will be rewarded

Hi,
If you are trying to get the vaues of these charecteristics in your report, then
Try using the fm VB_BATCH_GET_DETAIL
CALL FUNCTION 'VB_BATCH_GET_DETAIL'
    EXPORTING
      matnr                    = is_final-matnr
      charg                    = is_final-charg
      werks                    = is_final-werks
      get_classification       = 'X'
*   EXISTENCE_CHECK          =
*   READ_FROM_BUFFER         =
*   NO_CLASS_INIT            = ' '
*   LOCK_BATCH               = ' '
   IMPORTING
     ymcha                    = ymcha
*   CLASSNAME                =
TABLES
char_of_batch            = it_batch
EXCEPTIONS
no_material              = 1
no_batch                 = 2
no_plant                 = 3
material_not_found       = 4
plant_not_found          = 5
no_authority             = 6
batch_not_exist          = 7
lock_on_batch            = 8
OTHERS                   = 9
also the function module VC_I_GET_CONFIGURATION
And for table try cabn
Regards
Debarshi

How to get system Environment variable?

How to get system Environment variable without using jni?
just like "JAVA_HOME" or "PATH"...
Any reply is help to me!! :-)

Thx for your reply...
I get it!!!
Read environment variables from an application
Start the JVM with the "-D" switch to pass properties to the application and read them with the System.getProperty() method. SET myvar=Hello world
SET myothervar=nothing
java -Dmyvar="%myvar%" -Dmyothervar="%myothervar%" myClass
then in myClass String myvar = System.getProperty("myvar");
String myothervar = System.getProperty("myothervar");
This is useful when using a JAVA program as a CGI.
(DOS bat file acting as a CGI) java -DREQUEST_METHOD="%REQUEST_METHOD%"
-DQUERY_STRING="%QUERY_STRING%"
javaCGI
If you don't know in advance, the name of the variable to be passed to the JVM, then there is no 100% Java way to retrieve them.
NOTE: JDK1.5 provides a way to achieve this, see this HowTo.
One approach (not the easiest one), is to use a JNI call to fetch the variables, see this HowTo.
A more low-tech way, is to launch the appropriate call to the operating system and capture the output. The following snippet puts all environment variables in a Properties class and display the value the TEMP variable. import java.io.*;
import java.util.*;
public class ReadEnv {
public static Properties getEnvVars() throws Throwable {
Process p = null;
Properties envVars = new Properties();
Runtime r = Runtime.getRuntime();
String OS = System.getProperty("os.name").toLowerCase();
// System.out.println(OS);
if (OS.indexOf("windows 9") > -1) {
p = r.exec( "command.com /c set" );
else if ( (OS.indexOf("nt") > -1)
|| (OS.indexOf("windows 2000") > -1 )
|| (OS.indexOf("windows xp") > -1) ) {
// thanks to JuanFran for the xp fix!
p = r.exec( "cmd.exe /c set" );
else {
// our last hope, we assume Unix (thanks to H. Ware for the fix)
p = r.exec( "env" );
BufferedReader br = new BufferedReader
( new InputStreamReader( p.getInputStream() ) );
String line;
while( (line = br.readLine()) != null ) {
int idx = line.indexOf( '=' );
String key = line.substring( 0, idx );
String value = line.substring( idx+1 );
envVars.setProperty( key, value );
// System.out.println( key + " = " + value );
return envVars;
public static void main(String args[]) {
try {
Properties p = ReadEnv.getEnvVars();
System.out.println("the current value of TEMP is : " +
p.getProperty("TEMP"));
catch (Throwable e) {
e.printStackTrace();
Thanks to W.Rijnders for the W2K fix.
An update from Van Ly :
I found that, on Windows 2003 server, the property value for "os.name" is actually "windows 2003." So either that has to be added to the bunch of tests or just relax the comparison strings a bit: else if ( (OS.indexOf("nt") > -1)
|| (OS.indexOf("windows 2000") > -1 )
|| (OS.indexOf("windows 2003") > -1 ) // works but is quite specific to 2003
|| (OS.indexOf("windows xp") > -1) ) {
else if ( (OS.indexOf("nt") > -1)
|| (OS.indexOf("windows 20") > -1 ) // probably is better since no other OS would return "windows" anyway
|| (OS.indexOf("windows xp") > -1) ) {
I started with "windows 200" but thought "what the hell" and made it "windows 20" to lengthen its longivity. You could push it further and use "windows 2," I suppose. The only thing to watch out for is to not overlap with "windows 9."
On Windows, pre-JDK 1.2 JVM has trouble reading the Output stream directly from the SET command, it never returns. Here 2 ways to bypass this behaviour.
First, instead of calling directly the SET command, we use a BAT file, after the SET command we print a known string. Then, in Java, when we read this known string, we exit from loop. [env.bat]
@set
@echo **end
[java]
if (OS.indexOf("windows") > -1) {
p = r.exec( "env.bat" );
while( (line = br.readLine()) != null ) {
if (line.indexOf("**end")>-1) break;
int idx = line.indexOf( '=' );
String key = line.substring( 0, idx );
String value = line.substring( idx+1 );
hash.put( key, value );
System.out.println( key + " = " + value );
The other solution is to send the result of the SET command to file and then read the file from Java. ...
if (OS.indexOf("windows 9") > -1) {
p = r.exec( "command.com /c set > envvar.txt" );
else if ( (OS.indexOf("nt") > -1)
|| (OS.indexOf("windows 2000") > -1
|| (OS.indexOf("windows xp") > -1) ) {
// thanks to JuanFran for the xp fix!
p = r.exec( "cmd.exe /c set > envvar.txt" );
// then read back the file
Properties p = new Properties();
p.load(new FileInputStream("envvar.txt"));
Thanks to JP Daviau
// UNIX
public Properties getEnvironment() throws java.io.IOException {
Properties env = new Properties();
env.load(Runtime.getRuntime().exec("env").getInputStream());
return env;
Properties env = getEnvironment();
String myEnvVar = env.get("MYENV_VAR");
To read only one variable : // NT version , adaptation for other OS is left as an exercise...
Process p = Runtime.getRuntime().exec("cmd.exe /c echo %MYVAR%");
BufferedReader br = new BufferedReader
( new InputStreamReader( p.getInputStream() ) );
String myvar = br.readLine();
System.out.println(myvar);
Java's System properties contains some useful informations about the environment, for example, the TEMP and PATH environment variables (on Windows). public class ShowSome {
public static void main(String args[]){
System.out.println("TEMP : " + System.getProperty("java.io.tmpdir"));
System.out.println("PATH : " + System.getProperty("java.library.path"));
System.out.println("CLASSPATH : " + System.getProperty("java.class.path"));
System.out.println("SYSTEM DIR : " +
System.getProperty("user.home")); // ex. c:\windows on Win9x system
System.out.println("CURRENT DIR: " + System.getProperty("user.dir"));
Here some tips from H. Ware about the PATH on different OS.
PATH is not quite the same as library path. In unixes, they are completely different---the libraries typically have their own directories. System.out.println("the current value of PATH is: {" +
p.getProperty("PATH")+"}");
System.out.println("LIBPATH: {" +
System.getProperty("java.library.path")+"}");
gives the current value of PATH is:
{/home/hware/bin:/usr/local/bin:/usr/xpg4/bin:/opt/SUNWspro/bin:/usr/ccs/bin:
/usr/ucb:/bin:/usr/bin:/home/hware/linux-bin:/usr/openwin/bin/:/usr/games/:
/usr/local/games:/usr/ccs/lib/:/usr/new:/usr/sbin/:/sbin/:/usr/hosts/:
/usr/openwin/lib:/usr/X11/bin:/usr/bin/X11/:/usr/local/bin/X11:
/usr/bin/pbmplus:/usr/etc/:/usr/dt/bin/:/usr/lib:/usr/lib/lp/postscript:
/usr/lib/nis:/usr/share/bin:/usr/share/bin/X11:
/home/hware/work/cdk/main/cdk/../bin:/home/hware/work/cdk/main/cdk/bin:.}
LIBPATH:
{/usr/lib/j2re1.3/lib/i386:/usr/lib/j2re1.3/lib/i386/native_threads:
/usr/lib/j2re1.3/lib/i386/client:/usr/lib/j2sdk1.3/lib/i386:/usr/lib:/lib}
on my linux workstation. (java added all those execpt /lib and /usr/lib). But these two lines aren't the same on window either:
This system is windows nt the current value of PATH is:
{d:\OrbixWeb3.2\bin;D:\jdk1.3\bin;c:\depot\cdk\main\cdk\bin;c:\depot\
cdk\main\cdk\..\bin;d:\OrbixWeb3.2\bin;D:\Program
Files\IBM\GSK\lib;H:\pvcs65\VM\win32\bin;c:\cygnus
\cygwin-b20\H-i586-cygwin32\bin;d:\cfn\bin;D:\orant\bin;C:\WINNT\system32;C:\WINNT;
C:\Program Files\Dell\OpenManage\Resolution Assistant\Common\bin;
d:\Program Files\Symantec\pcAnywhere;
C:\Program Files\Executive Software\DiskeeperServer\;C:\Program Files\Perforce}
LIBPATH:
{D:\jdk1.3\bin;.;C:\WINNT\System32;C:\WINNT;d:\OrbixWeb3.2\bin;D:\jdk1.3\bin;
c:\depot\cdk\main\cdk\bin;c:\depot\cdk\main\cdk\..\bin;
d:\OrbixWeb3.2\bin;D:\Program Files\IBM\GSK\lib;
H:\pvcs65\VM\win32\bin;c:\cygnus\cygwin-b20\H-i586-cygwin32\bin;d:\cfn\bin;
D:\orant\bin;C:\WINNT\system32;
C:\WINNT;C:\Program Files\Dell\OpenManage\ResolutionAssistant\Common\bin;
d:\Program Files\Symantec\pcAnywhere;
C:\Program Files\Executive Software\DiskeeperServer\;C:\Program Files\Perforce}

How to separate debit and credit values in gl statement report (daywise)

hi
experts,
i have report.
selection criteria is
chars of account.
gl account
date .
how to separate debit and credit values in gl statement?.(i know there is a indicator shkzg).
but send me code.
op
date, total credit,total debit , balances.
also calculate opening and closing balance.
u created such type of report then plz help me.
thanks&regards.\
ajay.

Hi,
Usually it can be determined using the field shkzg. If it contain 'S' its debit and if it contains 'H' then its credit.
Before showing the amount you need to do like;
IF wa_gl-shkzg = 'H'.
wa_gl-dmbtr = wa_gl-dmbtr * (-1). " dbmtr - amount
ENDIF.
This will solve your problem.
Regards
Karthik D
Edited by: Karthik D on Jun 3, 2009 12:29 PM

How to get field and variable value in oracle

Similar Messages

Maybe you are looking for