How to measure voltage changes using a NI-9219 with strain gauges and use the data in labview
I am updating an old LabView/Data Acquisition system that uses strain gauges to measure two forces (normal and axial) as well as two moments (Pitch and Roll). I am having trouble reading the voltage changes over my strain gauges using my NI-9219 as well as filtering the data with both a lowpass and smoothing filter. The program attached has the project and should have all the sub-vi's used in the program. This program was written on LabView version 8.5 and is being updated to a 2013 version of LabView. Also, the hardware previously used was a combination of a NI SCB-68 and NI USB-6251. If anyone could help me it would be greatly appreciated!
Attachments:
New SSWT.zip 751 KB
Hi Coffeyfj,
Did you ever had this set up working? The first thing that I would do as I mentioned in the previous comment would be to use one of the LabVIEW examples. I recommended to you using the (strain - Continuous Input.vi). If you can read any voltage changes with the example vi, then we will know the problem we are having is in your code. If you cannot read any voltage changes using the example I mentioned, we can start trouble shooting the hardware connections. Are you connecting the excitation voltage? If yes, Are you making the right connections. Please refer to page 19 of the following document (half and full bridge modes)
NI 9219 Operating Instructions and Specifications - February 2009
http://digital.ni.com/manuals.nsf/websearch/4197ED4BD126E0B486257546005851CA
Regards,
William Fernandez
Applications Engineer
National Instruments
Similar Messages
-
How to create two UILoader that can be nested with each other and save the parent UILoader - as3
Hi all,
I am currently researching on the problem but I can't find any solution in the web.
Here is my problem:
I have two UILoader instance (loader_inner and loader_outer) I need to have loader_inner to be part of the loader_outer. I have also a button that will save all contents on loader_outer. Unluckily, when I trigger the save function, I only got a white image file. I was expecting that the contents of loader_outer (with loader_inner) to be saved also.
Note: background_1.jpg and rabbit.jpg are present in the directory. loader_outer and loader_inner where manually placed in the scene using UILoader component.
Here is a code snippet:
loader_inner.load(new URLRequest("background_1.jpg"));
loader_outer.load(new URLRequest("rabbit.jpg"));
loader_outer.addChild(loader_inner);
var bitmapData:BitmapData = new BitmapData(loader_outer.width,loader_outer.height);
bitmapData.draw(loader_outer);
var jpgencoder:JPGEncoder = new JPGEncoder(100);
var mybyte:ByteArray = jpgencoder.encode(bitmapData);
var myfile:FileReference = new FileReference();
myfile.save(mybyte,"test.jpg");
My expected output should be that background_1.jpg and rabbit.jpg should be saved in an image file and must be positioned like the ones placed in the scene.
Any ideas on this?
Thanks ahead.the load method is asynchronous so you don't want to apply that draw method until both loads are complete. ie, use a complete listener:
loader_inner.addEventListener(Event.COMPLETE.loadcompleteF);
loader_outer.addEventListener(Event.COMPLETE,loadcompleteF);
var loadNum:int=0;
loader_inner.load(new URLRequest("background_1.jpg"));
loader_outer.load(new URLRequest("rabbit.jpg"));
loader_outer.addChild(loader_inner);
// you should declare these variables outside this function so there are no gc issues.
function loadcompleteF(e:Event):void{
loadNum++;
if(loadNum==2){
var bitmapData:BitmapData = new BitmapData(loader_outer.width,loader_outer.height);
bitmapData.draw(loader_outer);
var jpgencoder:JPGEncoder = new JPGEncoder(100);
var mybyte:ByteArray = jpgencoder.encode(bitmapData);
var myfile:FileReference = new FileReference();
myfile.save(mybyte,"test.jpg"); -
Voltage squarer using the AD633JN
hello there i am trying to implement a voltage squarer using the AD633JN IC, i have first tried simulating it in multisim. well its transfer function is
W = [ {(X1-X2)(Y1-Y2)} / 10V] + Z.
Given this transfer function, squaring can easily be achieved by making X1 equal to Y1 and making X2 and Y2 equal to zero. This is done by connecting X1 and Y1 to the same input voltage (E) and grounding X2 and Y2. This is basically the same as connecting the X and Y inputs in parallel with each other.
The over-all transfer function of this circuit is as follows: W = (E squared) /(10 V).
Well i have looked at the data sheet of the AD633JN, and in it they describe how to change the scalar to something else using two resistors.i want the transfer function to be W = E squared , hence implementing the squaring function .so i want to remove the "10" in the denominator but iv failed...some one to help...Thank you so much.
attached is the datasheet (check under the ""variable scale factor"" section on page 8) and my multisim circuit.Hi,
I do not see the attachments. Can you please attach the files again.
Regards,
Tayyab R,
National Instruments. -
How to get the data from mysql database which is being accessed by a PHP application and process the data locally in adobe air application and finally commit the changes back in to mysql database through the PHP application.
If the data is on a remote server (for example, PHP running on a web server, talking to a MySQL server) then you do this in an AIR application the same way you would do it with any Flex application (or ajax application, if you're building your AIR app in HTML/JS).
That's a broad answer, but in fact there are lots of ways to communicate between Flex and PHP. The most common and best in most cases is to use AMFPHP (http://amfphp.org/) or the new ZEND AMF support in the Zend Framework.
This page is a good starting point for learning about Flex and PHP communication:
http://www.adobe.com/devnet/flex/flex_php.html
Also, in Flash Builder 4 they've added a lot of remote-data-connection functionality, including a lot that's designed for PHP. Take a look at the Flash Builder 4 public beta for more on that: http://labs.adobe.com/technologies/flashbuilder4/ -
For one Urgent Change while performing the one of the Approval before changing the status to 'To Be Tested'
We are getting below error.
The system does not recognize any changes using the CTS WBS BOM in the development system. The transaction is therefore incorrect or the status was reset by the system.
COuld anyone please help us to know, How it can be resolved?
We also have this below error.
System Response
If the PPF action is a condition check, the condition is initially considered as not met, and leads to another warning, an error message, or status reset, depending on the configuration.
If the PPF action is the execution of a task in the task list, and the exception is critical, there is another error message in the document.
Procedure
The condition cannot be met until the cause is removed. Analyze all messages in the transaction application log.
Procedure for System Administration
Analyze any other messages in the task list application log, and the entries for the object /TMWFLOW/CMSCV
Additional Information:
System cancel RFC destination SM_UK4CLNT005_TRUSTED, Call TR_READ_COMM:
No authorization to log on as a trusted system (Tr usted RC=0).
/TMWFLOW/TU_GET_REQUEST_REMOTE:E:/TMWFLOW/TRACK_N:107
For above error Table /TMWFLOW/REP_DATA_FLOWwas refreshed as well but still the same error.If you are in Test System, you can use function module AA_AFABER_DELETE to totally delete the depreciation area (tcode SE37, specify chart of depreciation and depreciation area), After that recreate your depreciation area and run AFBN. But before you do that, have you created a retirement transaction type that limits the posting on your new depreciation area? If not create one.
Hope this helps.
Thanks!
Jhero -
How can I restore my data from iCal? I didn't make any backup, but I use time machine with an external HD. I deleted iCal when I deleted my gmail account. I have tried to restore, but I can only restore the iCal software and not the data.
So what is your question?
If you forgot your encryption password:
Warning: Make sure it's a password you will remember or write it down for safekeeping. If you encrypt an iPhone backup in iTunes and forget your password, you can't restore from backup and your data will be unrecoverable.
If you can't remember the password and want to start again, you must perform a full software restore and chooseset up as a new device when iTunes prompts you to select the backup from which to restore.
The above comes from here:
http://support.apple.com/kb/HT4946 -
How am i able to use the same itunes account on a different ipod?
How am I able to use the same iTunes account on a different iPod?
By just using the same iTunes account. If you set up the iPod on your computer just make sure that iTunes is signed your account. Of settingup via wifi, just enter your existing account. Do not create a new one.
-
When I drag and drop a website onto my desktop, how can I make Firefox use the icon native to that website instead of the default firefox icon?
I have even gone painstakingly (SEVERAL TIMES) to the sites with IE, dragged the site onto my desktop in order to obtain the site native icons for my desktop (and deleted the ones with the Firefox icon) .... but they all soon revert to the default Firefox icon.
E X T R E M E L Y F R U S T R A T I N G !!!!!!!!!I don't want icons from the Firefox library.
I want the icon that comes from the website I'm making the shortcut for.
(If you go to a site in IE you will see the site generated icon at the left end of the URL in the address field.)
If I make IE my default browser I am able to get (and keep) those icons as shortcuts on my desktop without a problem.
I want to keep Firefox as my default browser.
So I want to know how to make Firefox accept the icon that comes from the website like IE does.
I have even gone to the trouble to use IE to create the shortcuts with the site specific icons.....but after I do that...... FIREFOX CONVERTS THEM TO THE FIREFOX DEFAULT ICON as soon as I re-boot or refresh my desktop.
I generally prefer Firefox as a browser....but If there's no fix.....I'm going to dump Firefox. -
how do I do to use the same appleid on all my devices, I want to use the last one I have on my Ipad mini, do I deleta the one I have on my Iphone and reeinstall it with the Id I use on my Ipad..?
Hi john,
Yes, you would sign out of iTunes & App Store: Settings>iTunes & App Store, click on the Apple ID, click on Sign Out. Then sign back on with the new Apple ID. Also, if you have an iCloud account with the other Apple ID, you would delete that iCloud account, and then sign on with your new ID: Settings>iCloud>Delete Account.
Cheers,
GB -
How many times can you use the serial number to download the cd
help how many times can we use the serial number to download the cd photoshop elements 11
Download Photoshop Elements products | 13, 12, 11, 10
Mylenium -
How many times can i use the limited warranty on my Apple iPhone 5, I just broke mine after getting a brand new one. Also, can I extend my warranty?
If you purchased AppleCare + within 30 days of getting your iPhone 5 you are allowed 2 instances of breakage replacement with a $49 deductible. If you do not have AppleCare + accidental breakage is not covered under you warranty, you can do an out-of-warranty replacement for $229.
-
How come I can't use the back gesture with my magic mouse on certain applications in Lion? I figured out that in Safari i have to use a 1 finger swipe to go back a page instead of 2 fingers like i used to do in Snow Leopard. But apps like iTunes and iPhoto and i can't do that. Any ideas? is there a setting im missing to make this work? It works in Safari but not any other applications, so im assuming theres no setting for this. Just want to know if this is just a bug that will be fixed in the next update or if its something I can fix now. Any help would be appreciated because its kind of annoying. Other than this minor issue I love Lion. Full screen apps are unbelievable.
Hi.
I managed to compile open-vm-tools and the kernel module against 3.14.5 kernel. Here is the tarball with the all the files.
I still have an issue : With vmware-player 6.0.2, I can't acces my shared folder :
root@P146S011b ~ # lsmod | grep hgfs
vmhgfs 41622 0
vmw_vmci 47960 2 vmw_vsock_vmci_transport,vmhgfs
root@P146S011b ~ # vmware-hgfsclient
R
D
C
root@P146S011b ~ # mount -t vmhgfs .host:/R /mnt
Could not add entry to mtab, continuing
root@P146S011b ~ # tail -1 /etc/mtab
.host:/R /mnt vmhgfs rw,relatime 0 0
root@P146S011b ~ # cd /mnt
cd:cd:6: not a directory: /mnt
1 root@P146S011b ~ #
Forgot to add an install file with a depmod -a inside. You will have to run it by yourself -
I have just bought a new Imac and it will not load my copy of FCE 3.5 as it says "PowerPC applications are no longer supported". So how do I get to use the version of FCE I am used to and have paid for ?
I do not have any experience with Final Cut, but if you have existing projects that you MUST access; then you are in need of a solution on your new iMac in Mountain Lion!
Unfortunately you got caught up in the minor miracle of Rosetta. Originally licensed by Apple when it migrated from the PowerPC CPU platform that it had used from the mid-1990's until the Intel CPU platform in 2006, Rosetta allowed Mac users to continue to use their library of PPC software transparently in emulation.
However, Apple's license to continue to use this technology expired with new releases of OS X commencing with Lion (and now Mountain Lion). While educational efforts have been made over the last 6 years, the fact is that Rosetta was SO successful that many users were caught unaware UNTIL they upgraded to Lion or Mountain Lion.
Workarounds:
1. Purchase a used Mac that will run Snow Leopard (with the optional Rosetta installed) and continue to run FCE on that Mac (you can actually use Screen Sharing with a "headless" used Snow Leopard Mac Mini and use the 27" screen from your iMac to view and work FCE in the Mac Mini environment);
2. Upgrade to an Intel compatible version of FCE and hope it converts your existing projects to its newer format correctly. There is much debate that the newer version of Final Cut are eliminating many needed features; for example Final Cut Pro X vs. Final Cut Pro 6 -- many users are staying with version 6;
3. Install Snow Leopard (with Rosetta) into Parallels and then install FCE in the Snow Leopard environment:
[click on image to enlarge]
Full Snow Leopard installation instructions here:
http://forums.macrumors.com/showthread.php?t=1365439
NOTE: STEP ONE of the instructions must currently be completed on a Snow Leopard or Lion Mac and the resulting modified Snow Leopard.cdr install file can then be moved over to your Mountain Lion Mac for completion of the remaining steps.
NOTE 2: Computer games with complex, 3D or fast motion graphics make not work well or at all in virtualization. -
I just put a solid state hard drive in my mac book pro and used super duper to copy the hard drive and move the data over to thew new ssd, but most of my music isn't in iTunes when I turned it on? How do I get my music to show up in my new drive?
Many thanks lllaass,
The Touch Copy third party software for PC's is the way to go it seems and although the demo is free, if you have over 100 songs then it costs £15 to buy the software which seems not a lot to pay for peace of mind. and restoring your iTunes library back to how it was.
Cheers
http://www.wideanglesoftware.com/touchcopy/index.php?gclid=CODH8dK46bsCFUbKtAod8 VcAQg -
How can I add a hyperlink to a PDF with OSX 10.9? The "Help" article says to use the "add link" feature under "edit." It's not there. I could add links w/ the previous OS. Time sensitive project.
Which application are you using?
Clinton
Maybe you are looking for
-
Since the latest update, most of my third party apps no longer work, none of my photo software, torrent programs, open office, NOTHING!! It is most frustrating - is there a way to 'downgrade' and go back to a previous version of the firmware, or am I
-
I just set it up to let the kids i babysit play games online and i have no i dea what i set the password to. I really do not want to have to factory reset everything. What can i do?
-
If I download a song on myiPad, how do I get it to iCloud to download on other devices?
IF I download a song to my iPad, how can I get it to iCloud to download it to other devices?
-
O/S: Windows Server 2003 DB: Oracle 11gR2 We are in the midst of a production load process. Noticed that the level 2 backup from last night failed. Want to take a level 1 backup as soon as possible. How will a level 1 backup affect a live system if i
-
Worst internet service and support I've ever had
every single day for the last THREE weeks almost I've called and complained about my awful service. I'm so frustrated at this point that I'm ready to go into a random comcast call center near by and start screaming at people who can't even help me. I