How to Merge Multiple Calendars?

Somehow I have managed to end up with 11 different iCloud calendars. I would like to merge them to one or two calendars. I tried deleting the calendar but then I get a message saying if I delete the calendar, all of the events associated with that calendar will be deleted, which I don't want to do. Suggestions?
I think that as a result of the multiple calendars, I have multiple holidays showing up on my calendar. For example, St. Patricks days shows up twice. This clogs up my calendar with unnecessary events. How to I reduce the holidays to one?

Thanks for the response, but it now has created a bigger problem. I was able to follow your instructions on two of the calendars and it worked well. However, on the third calendar, in importing the exporting ics file into the calendar I want to keep I get the following error:
"The server responded with an error. The event "xxx event" was rejected by "iCloud" because it already exists".
I then get three options:
1) Ignore
2) Try Again (The same error message occurs)
3) Revert to Server (I have no idea what this means - but when I click it, nothing seems to happen)
There doesn't seem to be a way to get out of this import activity and error messages. I have to Force Quit the program to stop. I have tried restarting the computer and the same thing occurs. Now I can't use iCal (although if I go into my iCloud calendar on Safari - that works).
I suppose I could continue to click on Ignore and eventually it would go through all of the duplicate entries. However, there is probably 10 to 15 years of entries. There could thousands if not tens of thousands of entries.
Any suggestions? Maybe I will sit down for a long movie and click on "Ignore" several thousand times and that will solve the problem!

Similar Messages

How to merge multiple MobileMe calendars?

(1) I have several calendars on MobileMe that I want to consolidate into one calendar. How do I do that?
(2) Everytime I delete the local "calendar" it reappears when I sync my iPhone with iTunes. This presents a problem when I create a new event because that event defaults to the local calendar instead of my first MobileMe calendar. Then this new event lives on my iMac but never sync's to MobileMe.
(3) I don't want to lose any of the events I have in my different calendars during this process.
To summarize: I want to get rid of the local calendars, consolidate the MobileMe calendars into one & not lose my events. I want to end up with one MobileMe calendar for all my events (which will evenually roll over to the iCloud service). Thanks for any suggestions & help.

kporterjr,
(1) I have several calendars on MobileMe that I want to consolidate into one calendar. How do I do that?
Use MobileMe: How to back up calendar data using MobileMe Calendar for help in backing up and restoring MobileMe calendar data.
After the data is backed up, you can then restore each calendar into one new consolidated calendar.
(2) Everytime I delete the local "calendar" it reappears when I sync my iPhone with iTunes. This presents a problem when I create a new event because that event defaults to the local calendar instead of my first MobileMe calendar. Then this new event lives on my iMac but never sync's to MobileMe.
You appear to be using iTunes for syncing. Make sure that your iPhone is set up to use MobileMe sync: Apple - MobileMe - Set Up MobileMe.
I want to get rid of the local calendars, consolidate the MobileMe calendars into one & not lose my events. I want to end up with one MobileMe calendar for all my events (which will evenually roll over to the iCloud service).
Be sure to use iCal>File>Export...>Export for each one of your "On My Mac" calendars. The exported copies will allow you to preserve your data and import that data into a new calendar. After successful import into a new calendar you can delete the "On My Mac" calendars.

How to setup Multiple calendar in 7.9.6 OBIA

Friends, Could some one please explain me what this 'Multiple Calendar' option is, in 7.9.6. There is not much Information in Config guide with this regard.
My Question is, does 'Multiple Calendar option' means 7.9.6 supports different calendars but one at a time or does it support more than one calendar at a time in the application.
Where I'm coming from is, our source is EBS and some Business users want OBIA calendar to be same as EBS so that they can see Adjustment Periods as well..but on the other side they also want Weekly Analysis..which is not present in EBS (our EBS is configured with 445 calendar with Adjustments...so lowest is periods) ..so not sure how to go about this.
is there is a possibility of using EBS Sourced Claendar( Enterprise) as well as another 445 calendar which will give us week level analysis capabilities? Lets say it allows different calendars at a time..then how does it work?..does it pre-aggregates for different calendars?..please explain.
Any help regarding this will be highly appreciated.
Thanks
Edited by: Madhu.Hosadurga on 23-Sep-2009 03:49

hey madhu,
try this forum here: Business Intelligence Applications
cheers, rnm.

How to Merge Multiple PDF's

HI Forum
I am a newbie to both Acrobat and VB,
Basically a perl Developer,
I have created a application to Merge multiple PDF's into a Single PDF, but the problem I am facing is some pages are missed during Merging
For Example
I have 4 pdf's (1.pdf, 2.pdf, 3.pdf, 4.pdf), each PDF has 2 pages, totally 8 pages,
When i merge using my application, it is getting collapsed and then merged
Here is my Code
<code>
Imports System.IO
Imports Acrobat
Public Class Form1
    Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
        MergePDF()
    End Sub
    Sub MergePDF()
        Dim gPDDoc1 As AcroPDDoc
        Dim gPDDoc2 As AcroPDDoc
        Dim gPDDoc3 As AcroPDDoc
        Dim gPDDoc4 As AcroPDDoc
        gPDDoc1 = CreateObject("AcroExch.PDDoc")
        gPDDoc2 = CreateObject("AcroExch.PDDoc")
        gPDDoc3 = CreateObject("AcroExch.PDDoc")
        gPDDoc4 = CreateObject("AcroExch.PDDoc")
        Dim chk1 = gPDDoc1.Open("D:\sathish\1.pdf")
        Dim chk2 = gPDDoc2.Open("D:\sathish\2.pdf")
        Dim chk3 = gPDDoc3.Open("D:\sathish\3.pdf")
        Dim chk4 = gPDDoc4.Open("D:\sathish\4.pdf")
        Dim mergefile As Boolean
        Dim numpg1, numpg2, numpg3, numpg4
        numpg1 = gPDDoc1.GetNumPages()
        numpg2 = gPDDoc2.GetNumPages()
        numpg3 = gPDDoc3.GetNumPages()
        numpg4 = gPDDoc4.GetNumPages()
        MsgBox(numpg1 & numpg2 & numpg3 & numpg4)
        mergefile = gPDDoc1.InsertPages(numpg1 - 1, gPDDoc2, 0, 1, 0)
        mergefile = gPDDoc1.InsertPages(numpg2 - 1, gPDDoc3, 0, 1, 0)
        mergefile = gPDDoc1.InsertPages(numpg3 - 1, gPDDoc4, 0, 1, 0)
        Dim savemergefile As Boolean
        savemergefile = gPDDoc1.Save(1, "D:\sathish\merged.pdf")
    End Sub
End Class
</code>
I Dont know how to give the correct page end to merge,
Thanks in Advance for your Kind replies,
Thanks & Regards
Sathish V.

Great idea. do you have example code? I found some code but it its contingent upon the pages having a page number on them. the pdfs im dealing with have no page numbers on the pages. also this code deletes pages in a range. I need to delete all other pages except for the page numbers on the range. thanks! Option Explicit Sub Delete_PDF_Pages() ' Adobe code based on http://vbcity.com/forums/t/51200.aspx Dim xMsg          As String Dim xInput        As String Dim xOutput        As String Dim xResponse      As Long Dim xLast_Row      As Long Dim xErrors        As Long Dim xDeleted      As Long Dim i              As Long Dim j              As Long Dim AcroApp        As CAcroApp Dim AcroPDDoc      As CAcroPDDoc Dim AcroHiliteList As CAcroHiliteList Dim AcroTextSelect As CAcroPDTextSelect Dim xarray()      As Variant Dim PageNumber    As Variant Dim PageContent    As Variant Dim xContent      As Variant xInput = "C:\Users\jaime\Desktop\Granado LLC\test\TestPages.pdf" xOutput = "C:\Users\jaime\Desktop\Granado LLC\test\TestPages_Output.pdf" xLast_Row = [A1].SpecialCells(xlLastCell).Row ReDim xarray(xLast_Row) xResponse = MsgBox("About to delete all pages which contain values from the range A1:A" & xLast_Row & Chr(10) _             & Chr(10) & "Input:" & Chr(9) & xInput _             & Chr(10) & "Output:" & Chr(9) & xOutput _             & Chr(10) & Chr(10) & "('OK' to continue, 'Cancel' to quit.)", vbOKCancel, "Delete Pages") If xResponse = 2 Then     MsgBox "User chose not to continue. Run terminated."     Exit Sub End If ' Files and data OK? If Dir(xInput) = "" Then xMsg = "Input file not found - " & xInput & Chr(10) If Dir(xOutput) <> "" Then xMsg = "Output file exists - " & xOutput & Chr(10) xarray = Application.Transpose(Range("A1:A" & xLast_Row)) For i = 1 To xLast_Row     If Not IsNumeric(xarray(i)) Or xarray(i) = "" Then         xMsg = "Non-numeric ""Delete"" value of """ & xarray(i) & """ found on row " & i & Chr(10)         Exit For     End If Next If xMsg <> "" Then     MsgBox (xMsg & Chr(10) & "Run cancelled.")     Exit Sub End If ' Open the PDF... Set AcroApp = CreateObject("AcroExch.App") Set AcroPDDoc = CreateObject("AcroExch.PDDoc") If AcroPDDoc.Open(xInput) <> True Then     MsgBox (xInput & " couldn't be opened - run cancelled.")     Exit Sub End If ' Read each page... For i = AcroPDDoc.GetNumPages - 1 To 0 Step -1     Set PageNumber = AcroPDDoc.AcquirePage(i)     Set PageContent = CreateObject("AcroExch.HiliteList")     'Get up to 9,999 words from page...     If PageContent.Add(0, 9999) <> True Then                 Debug.Print "Add Error on Page " & i + 1         xErrors = xErrors + 1         Else         Set AcroTextSelect = PageNumber.CreatePageHilite(PageContent)             If Not AcroTextSelect Is Nothing Then             xContent = ""             For j = 0 To AcroTextSelect.GetNumText - 1                 xContent = xContent & AcroTextSelect.GetText(j)             Next j             For j = 1 To xLast_Row                 If InStr(1, xContent, xarray(j)) > 0 Then                     Debug.Print "Page " & i + 1 & " contains " & xarray(j) & " - " & xContent                     ' To avoid problems with the delete...                     Set AcroTextSelect = Nothing                     Set PageContent = Nothing                     Set PageNumber = Nothing                     If AcroPDDoc.DeletePages(i, i) = False Then                         MsgBox ("Error deleting page " & i + 1 & " - run cancelled.")                         Exit Sub                     End If                     xDeleted = xDeleted + 1                     Exit For                 End If             Next         End If             End If Next i If AcroPDDoc.Save(PDSaveFull, xOutput) = False Then     MsgBox "Cannot save the modified document"     Exit Sub Else     MsgBox (xDeleted & " pages deleted. (" & xErrors & " errors.)") End If     AcroPDDoc.Close AcroApp.Exit End Sub

How to merge multiple XML or Text documents into 1 Word Document?

Hi all,
We're looking for a way to merge multiple XML or Text documents into 1 Word document.
All the XML or Text documents are oriented as a 'Paragraph', meaning smaller pieces of text.
By selecting some of these XML documents, the system should be able to create a new Word document with all the selected text paragraphs included.
The Word document can then be edited for applying a correct lay-out and the document is ready.
Actually, we are trying to do some kind of 'mail merge' but with multiple XML or Text documents!
Has anybody an idea whether something exist already or give us a direction how to proceed?
Thanks in advance,
Pascal Decock

You use Assembler for this purpose.
1) Assembler can be accessed through LC Java API. See http://help.adobe.com/en_US/enterpriseplatform/10.0/programLC/help/index.html
API Quick Starts (Code Examples) > Assembler Service API Quick Starts
2) Last week I posted on generating and merging PDF's from PostScript. Take a look at the assembly service instance in the .lca. Assembler uses DDX (Document Description XML) to describe document construction. NOTE the .lca was developed with ES 3 (aka ADEP). The .lca It contains the most basic DDX.
<?xml version="1.0" encoding="UTF-8"?>
<DDX xmlns="http://ns.adobe.com/DDX/1.0/">
<PDF result="out.pdf">
<PDF source="inDoc1"/>
<PDF source="inDoc2"/>
</PDF>
</DDX>
http://forums.adobe.com/message/4019760#4019760
DDX Reference at http://help.adobe.com/en_US/livecycle/9.0/ddxRef.pdf
Steve

How to merge multiple live audio streams into a single stream in FMS?

I need to merge multiple live audio streams into a single stream so that i can pass this stream as input to VOIP through a softphone.
For this i tried the following approach:
Created a new stream (str1) on FMS onAppStart and recorded the live streams (sent throgh microphone) in that new stream.
Below is the code :
application.onAppStart = function()
application.myStream=Stream.get("foo");
application.myStream.record();
application.onPublish = function (client,stream)
      var streamName = stream.name;
      application.myStream.play(streamName,-2,-1};
The problem is that the Stream.play plays only 1 live stream at a time.As soon as a the 2nd live stream is sent to FMS then Stream.play stops playing the previous live stream.So,only the latest live stream is getting recorded.Whereas i need to record all the live streams in the new stream simultaneously.
Any pointers regarding this are welcome.
Thanks

well i tried this once for one of my scripts and the final conclusion is its not possible to combine two streams into 1.....how would you time/encode the two voices......there is no know solution to this in flash. If you continue on despite me and find a solution please post it so we can explain to rest of world.

How to merge multiple spools in one PDF

hi all,
i have a requirement to merge multiple spools into one PDF.
I have the code to merge 2 spools into one PDF but acc to my requirement this number can be any( say 100). hence i need help to merge N number of spools in one PDF.
Regards
geeta gupta

Take the data of all spools into a internal table then create a new spool with this data then downlad this data into pdf format.
By this method you can download any number of spools into a single pdf file. Please see the below code
Fetch spool number
Select rqident from tsp01 into table g_t_data
where...............
Read sool data and take this data into a internal table
Loop at g_t_data.
           Call program to read spool as follows
      SUBMIT rspolst2 EXPORTING LIST TO MEMORY AND RETURN
      WITH rqident = g_t_data-rqident
      WITH first = '1'
      Read memory where spool data is stored
      CALL FUNCTION 'LIST_FROM_MEMORY'
           TABLES
                listobject = mem_tab
      Convert spool data to Ascii
      IF NOT mem_tab[] IS INITIAL.
        CALL FUNCTION 'LIST_TO_ASCI'
             EXPORTING
                  list_index         = -1
             TABLES
                  listasci           = g_t_text1(table type c length 10000)
                  listobject         = mem_tab(LIKE TABLE OF abaplist)
        APPEND LINES OF g_t_text1 TO g_t_text.
      ENDIF.
ENDLOOP.
Create new spool with internal table data
NEW-PAGE PRINT ON
KEEP IN SPOOL l_keep(variable type c default u2018Xu2019)
LINE-SIZE      300
LIST NAME      l_list (variable(30) TYPE c default 'combined_pdf')
NO DIALOG.
LOOP AT g_t_text.
    WRITE: g_t_text-data.
ENDLOOP.
NEW-PAGE PRINT OFF.
COMMIT WORK.
Fetch this spool number from TSP01
SELECT rqident rqcretime FROM tsp01 INTO TABLE l_t_pdf(internal table having two fields rqident LIKE tsp01-rqident and rqcretime LIKE tsp01-rqcretime)
WHERE   rqowner = sy-uname AND
                 rq2name = 'COMBINED_PDF'.
Download spool data into pdf format
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
       EXPORTING
            src_spoolid   = l_t_pdf-rqident
       IMPORTING
            pdf_bytecount = l_size(variable type i)
       TABLES
            pdf           = g_pdf(table like table of tline)
CALL FUNCTION 'GUI_DOWNLOAD'
       EXPORTING
            bin_filesize = l_size "size
            filename     = l_data
            filetype     = 'BIN'
       TABLES
            data_tab     = g_pdf.
Hope this will help you.

How to merge multiple documents via command line (Adobe Acrobat Pro 9.3.2)?

I'm searching solutions to merge multiple documents (all stored in one folder) via command line or batch file to a single PDF-File...
Is there a way to do this?
Finaly I want to control this from a application written in MS-Access. So, perhaps there are some features already integrated in Access to do this?
Thanks for answer!

If you have some programming experience you could probably do this using VBA from within MS Access to control Acrobat via OLE.
Lots of examples on the Web.
Hope this helps

How to publish multiple calendars into .mac?

There doesn't seem to be an option to publish multiple calendars to .mac. Is ther ea way that I can have all my calendars in one ical (.mac) view? I don't want to have multiple ical pages online.
thanks

There is no way to maintain separate source calendars on a Macintosh desktop or portable machine and publish a single, unified calendar using .Mac or a WebDAV server. It simply does not work that way.

How to merge multiple PDFs and display in a new window

Hi,
I'm trying to merge multiple PDFs into one PDF and display the output in a new window using PeopleCode. I have a button on a page, which when clicked should open a new window with the merged PDFs. I am able to succussfully merge the PDFs using the PDFmerger class (mergePDFs) but unable to display the result in a new window.
Please help.

Thanks.
I also found this piece of code very helpful.
Local PSXP_RPTDEFNMANAGER:Utility &oUtil;
Local boolean &bRtn;
/* send the output to client */
/* &sFileName = the file path /file_name.extension */
&oUtil = create PSXP_RPTDEFNMANAGER:Utility();
&bRtn = &oUtil.zipAndViewAttachment(&sFileName);
Edited by: user8260115 on Sep 9, 2009 4:57 PM

How to Create Multiple Calendar Exceptions Which Occasionally Coincide

Ok so here's my situation
I have a group of schedules that currently have technical work and routine meetings and I am working in Project Standard 2010. I am not a fan of including meetings in technical schedules especially the recurring variety that represent informal tag-ups.
However, the team that is working the actual schedule has a significant portion of their work day captured by meetings. They want to be able to resource level, but they have to also be able to show the impact of their meeting obligations on their
ability to complete technical work.
So originally I was going to have these meetings entered as recurring events in the schedule; their periodicities were various. Some meetings were daily, some weekly, some monthly. But it became clear to me that this approach was going to become
unsustainable. With schedules that extend out a full calendar year, the daily and weekly meetings in particular became voluminous numbering in the thousands; in some cases representing 2/3 of all the schedule activities.
This makes timely tacking, updating, and statusing of these schedules un-achievable. I searched on the web and was given a clever suggestion: to create a resource calendar with recurring exceptions that represented meeting obligations for a resource.
I liked the idea but there was a problem. When I was testing the idea I wanted to see what would happen if a resource had multiple exceptions (representing multiple meetings) that coincided on the same day. Would Project recognize all of the
exceptions? So I created a resource named "Bob" and gave him
-a daily exception with a work day defined from 9:00-12:00 and 1:00-5:00 (to represent an 8:00 hourly meeting)
-a weekly exception with a work day defined from 8:00-12:00 and 1:00-4:00 (to represent a 4:00 hourly meeting)
-a monthly exception with a work day defined from 8:00-11:00 and 1:00-5:00 (to represent an 11:00 hourly meeting)
I ensured that the weekly and monthly exceptions happened on Mondays, and then I found a Monday were all 3 exceptions would be in effect. I schedule an activity to begin on the date, and then applied Bob to that activity. Then I went to the Resource
Usage view to Bob's hours, and instead of reflecting that Bob could only do 5 hours of work, it showed that Bob could do 7 hours of work.
It appeared that Project 2010 would only honor one exception at a time, and it appeared to do it in a hierarchy... first daily exceptions, then monthly exceptions, then weekly exceptions. Is that simply how it works in Project 2010? Can only
one exception be honored at a time? And if there are coinciding exceptions, does Project 2010 start with the daily exception first?

Guillaume,
Most people who have familiarity with scheduling agree with John, you, and myself; that the attempt to schedule, track,
status, and update routine meetings is probably ill-advised. I thought about doing something a long the lines of what you are suggesting (if for no other reason because it would make my life easier) to just reduce their percentage availability.
I may ultimately present that also as an alternative. My solution right now is to create exceptions to the
exception. Meaning: If I have a daily, weekly, and monthly exception, then I consider my daily meeting to be "The Exception" (because it has the highest frequency of occurrence), and my weekly and monthly meetings are exceptions to "The Exception". On
the days when a weekly and/or monthly meeting coincide with a daily meeting, I just add all of their outages together and create an exception to "The Exception" on that day. Theoretically this should work, I was just hoping for a more elegant solution.
I was hoping someone would say, "oh yeah, you just go to options and select 'Merge Exceptions' and you're good to go".

How to Merge multiple XML files in one file ( Env: XML Publisher 5.6.2)

All,
I have recently started working on XML publisher and have developed 3 reports in last 2 days using XML Publisher and integrating them with Concurrent programs.
This is a great tool.
I have got another requirement, where i need to use xml file generated by multiple run of same report with various parameters and then merge all xml file to a single report. Developing the whole custom process will take very long time and sure will have bugs in it. Instead i was thinking to use xml file generated by Oracle report itself.
Report "US Gross to net summary" generates xml output in standard output directory and then show output in PDF file. I have 7 such file generated for each payroll. I want to merge output of xml into a single xml so that i can create single report having data from all 7 xml files showing me All payroll output in a single report.
Can someone please guide me , how can i read xml file data from the output directory of a seeded concurrent program and how to manipulate data in it.
Thanks
Ankur

Hi Tim,
Thanks for replying. I have looked for "PDFBookBinder class" in xml publisher user guide for ver 5.6.2. I didn't get any reference of this text. Can you please guide me to a tutorial/link where i can get more information about this class.
Also, i originally thought of similar to your second logic, as my design basis. Oracle process generates the xml file in output directory which i can get. What i didn't get is how do i "pick them up and merge" using publisher. Also, is there way to do this merging process using pl/sql ? Can you please give little more information on your second approach.
My original plan of action is that i will create a report set in which i will call oracle seeded report for all 7 payrolls in a sequential manner. Then using the child requests of the report set i will get to 7 xml files generated by seeded oracle process. Then the piece i am not sure of , i will use those 7 files to generate a single xml file having payroll name as tree top for each output. Once single xml is ready, i can easily design a template and register the process to generate output as Excel.This process will not require me to actually change any data or do any calculation. It will only reformatting the feilds we see and abiity to see all 7 payroll at one time rather then entering these numbers manually into an excel to do analysis.
Please provide your feedback, if you think above plan is not feasible or need corrections.
Best Regards,
Ankur

How to merge 2 calendars from iPhoto

I have 2 different 12-month calendars created in iPhoto. How do I merge them into 1 24-month calendar? I'd

You can not
LN

How to merge multiple iPhoto libraries on one Mac

When I (option+click) on iPhoto I see 3 libraries to choose from. I don't know how I got them but I want to merge all 3 into a single library. How do I do that? I downloaded iPhoto library manager already but from there I am lost.

You'll need to purchase it.
Then check the instructions here - 6.4...
http://www.fatcatsoftware.com/iplm/Help/table%20of%20contents.html

How to merge multiple responses in EBS

Hi Everyone,
I have been currently working on POC where Mediator EBS Service needs invokes multiple Provider ABCS to search for Item in System A and System B.
Result from both the Providers should be combined and should be sent out as one message to the Requester ABCS.
Can this be achieved through Mediator Service ?
Thanks in Adavance

Hi Gerhard,
So in the case of EBF, EBF is not allowed to communicate with either of the ABCS. As per the deisgn flow suggested above, we can orchestrate and invoke both the system EBS and receive the response from Prov A & prov B. Similarly it would merge the results in whatever way and create the final response EBM that is passed back to the ReqABCS.
Here comes my question. Can the EBF send the final response EBM directly to Req ABCS. It should have another mediator to do this rite??
So it should be like as said above,
Req ABCS - EBS(route to EBF) - EBF - EBS1( sys1) - Prov ABCS 1
Req ABCS - EBS(route to EBF) - EBF - EBS2( sys2) - Prov ABCS 2
So Req ABCS-1
Generic EBS - 1 ( to route the EBM to EBF.. This will also get the response EBM back from EBF.)
EBF -1 ( bpel process to orchestrate to multiple EBS)
EBS 1(sys1)
EBS 2(sys2)
Prov ABCS - 2 ( sys1 & sys2)
Do correct me if im wrong.
Regards,
Rahul
Edited by: Rahul Somasundaram on Sep 7, 2010 1:04 AM
Edited by: Rahul Somasundaram on Sep 7, 2010 1:05 AM

How to Merge Multiple Calendars?

Similar Messages

Maybe you are looking for