How to message using MacBook Pro

I just recieved a MacBook Pro and would like to message to iPod Touch, how do I go about doing that??

OSX Lion does not support iMessage (if that is what you had in mind).
You could try iChat or Skype for messaging.

Similar Messages

  • I bought a used macbook pro with 10.9.5 but it didn't start up clean.  There are a lot of programs etc.  How do I know if it's ok to use?

    I have a macbook pro that I want to give to my son for school.  I just purchased a newer (used)  macbook pro with more HD and memory to replace the one I use for work.  I need to set up the new book and transfer all my stuff over, then clean the older one up for my Son.  I'm concerned because the newer book I purchased on ebay.  It didn't start up a if it were a clean machine.  I turned it on and it is full of lots of programs and I'm worried the previous owners files and information are on the computer.  They both have the OS X 10.9.5 (13F34) software.   I updated to the new iLife on the older one, the newer one has 09.  I would appreciate the steps I should take.  I have everything backed up on the older book through drop box and cloud, so I'm ready.   Also the seller told me the computer would have Mavericks already installed, but I don't see it.

    Before buying a second-hand computer, you should have run Apple Diagnostics or the Apple Hardware Test, whichever is applicable.
    The first thing to do after buying the computer is to erase the internal drive and install a clean copy of OS X. You—not the original owner—must do that. Changes made by Apple over the years have made this seemingly straightforward task very complex.
    How you go about it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
    It's unsafe, and may be unlawful, to use a computer with software installed by a previous owner.
    1. If you don't own another Mac
    a. If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller—not from eBay or anything of the kind. If the machine is very old and has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
    b. If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for a MacBook Air. You should have received the media from the original owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
    To start up from an optical disc or a flash drive, insert it, then restart the computer and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
    c. If the machine shipped with OS X 10.7 or later, you don't need media. It should start up in Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
    d. Some 2010-2011 models shipped with OS X 10.6 and received a firmware update after 10.7 was released, enabling them to use Internet Recovery. If you have one of those models, you can't reinstall 10.6 even from the original media, and Internet Recovery will not work either without the original owner's Apple ID. In that case, contact Apple Support, or take the machine to an Apple Store or another authorized service provider to have the OS installed.
    2. If you do own another Mac
    If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to prepare a USB device, then start up the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can start from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
    3. Partition and install OS X
    a. If you see a lock screen when trying to start up from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another service provider to be unlocked. You may be asked for proof of ownership.
    b. Launch Disk Utility and select the icon of the internal drive—not any of the volume icons nested beneath it. In the  Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
    c. An unusual problem may arise if all the following conditions apply:
              OS X 10.7 or later was installed by the previous owner
              The startup volume was encrypted with FileVault
              You're booted in Recovery mode (that is, not from a 10.6 installation disc)
    In that case, you won't be able to unlock the volume or partition the drive without the FileVault password. Ask for guidance or see this discussion.
    d. After partitioning, quit Disk Utility and run the OS X Installer. If you're installing a version of OS X acquired from the App Store, you will need the Apple ID and password that you used. When the installation is done, the system will automatically restart into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
    e. Run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the original owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed—you have to repurchase them.
    4. Other issues
    a. If the original owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're irrevocably linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
    b. If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to  authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
    c. When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a lifetime limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an iCloud account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information. The setup limit doesn't apply to Apple ID accounts used for other services, such as the iTunes and Mac App Stores, or iMessage. You can create as many of those accounts as you like.

  • How can connect my macbook pro mid 2012 to my imac 21.5 inch mid 2010 ?? I want to use imac like a display for macbook.

    How can connect my macbook pro mid 2012 to my imac 21.5 inch mid 2010 ?? I want to use imac like a display for macbook.

    Target Display Mode: Frequently Asked Questions (FAQ)
    with a mini display to mini display cable. Attach it to the Thunderbolt port on your MBP and to the mini display port on your iMac.
    How do I enable TDM?
    Make sure both computers are turned on and awake. 
    Connect a male-to-male Mini DisplayPort or ThunderBolt cable to each computer.
    Press Command-F2 on the keyboard of the iMac being used as a display to enable TDM.
    Note: In Keyboard System Preferences, if the checkbox is enabled for "Use all F1, F2, etc. keys as standard functions keys," the key combination changes to Command-Fn-F2.

  • How can i copy files from one external hard disk to another using macbook pro with retina display

    How can i copy files from one external hard drive to another using macbook pro with retina display?

    That's odd - if you open Disk Utility (Applications->Utilities) and select the disk(s), how are they formatted? If you're only going to be used with your Mac, they should be formatted as "Mac OS Extended (Journaled)".
    Clinton

  • HT1338 Purchased a used macbook pro with Mountain Lion. My old Mac runs Snow Leopard is backed up to Time machine. How do I register the operating system to me and how do I use Time Machine to move my files to the new used computer?

    Purchased a used macbook pro with Mountain Lion. My old Mac runs Snow Leopard is backed up to Time machine. How do I register the operating system to me and how do I use Time Machine to move my files to the new used computer?

    If you look at the User Tips tab, you will find a write up on just this subject:
    https://discussions.apple.com/docs/DOC-4053
    The subject of buying/selling a Mac is quite complicated.  Here is a guide to the steps involved. It is from the Seller's point of view, but easily read the other way too:
    SELLING A MAC A
    Internet Recovery, and Transferability of OS & iLife Apps
    Selling an Old Mac:
    • When selling an old Mac, the only OS that is legally transferable is the one that came preinstalled when the Mac was new. Selling a Mac with an upgraded OS isn't doing the new owner any favors. Attempting to do so will only result in headaches since the upgraded OS can't be registered by the new owner. If a clean install becomes necessary, they won't be able to do so and will be forced to install the original OS via Internet Recovery. Best to simply erase the drive and revert back to the original OS prior to selling any Mac.
    • Additionally, upgrading the OS on a Mac you intend to sell means that you are leaving personally identifiable information on the Mac since the only way to upgrade the OS involves using your own AppleID to download the upgrade from the App Store. So there will be traces of your info and user account left behind. Again, best to erase the drive and revert to the original OS via Internet Recovery.
    Internet Recovery:
    • In the event that the OS has been upgraded to a newer version (i.e. Lion to Mountain Lion), Internet Recovery will offer the version of the OS that originally came with the Mac. So while booting to the Recovery Disk will show Mountain Lion as available for reinstall since that is the current version running, Internet Recovery, on the other hand, will only show Lion available since that was the OS shipped with that particular Mac.
    • Though the Mac came with a particular version of Mac OS X, it appears that, when Internet Recovery is invoked, the most recent update of that version may be applied. (i.e. if the Mac originally came with 10.7.3, Internet Recovery may install a more recent update like 10.7.5)
    iLife Apps:
    • When the App Store is launched for the first time it will report that the iLife apps are available for the user to Accept under the Purchases section. The user will be required to enter their AppleID during the Acceptance process. From that point on the iLife apps will be tied to the AppleID used to Accept them. The user will be allowed to download the apps to other Macs they own if they wish using the same AppleID used to Accept them.
    • Once Accepted on the new Mac, the iLife apps can not be transferred to any future owner when the Mac is sold. Attempting to use an AppleID after the apps have already been accepted using a different AppleID will result in the App Store reporting "These apps were already assigned to another Apple ID".
    • It appears, however, that the iLife Apps do not automatically go to the first owner of the Mac. It's quite possible that the original owner, either by choice or neglect, never Accepted the iLife apps in the App Store. As a result, a future owner of the Mac may be able to successfully Accept the apps and retain them for themselves using their own AppleID. Bottom Line: Whoever Accepts the iLife apps first gets to keep them.
    SELLING A MAC B
    Follow these instructions step by step to prepare a Mac for sale:
    Step One - Back up your data:
    A. If you have any Virtual PCs shut them down. They cannot be in their "fast saved" state. They must be shut down from inside Windows.
    B. Clone to an external drive using using Carbon Copy Cloner.
    1. Open Carbon Copy Cloner.
    2. Select the Source volume from the Select a source drop down menu on the left side.
    3. Select the Destination volume from the Select a destination drop down menu on the right
    side.
    4. Click on the Clone button. If you are prompted about creating a clone of the Recovery HD be
    sure to opt for that.
    Destination means a freshly erased external backup drive. Source means the internal
    startup drive. 
    Step Two - Prepare the machine for the new buyer:
    1. De-authorize the computer in iTunes! De-authorize both iTunes and Audible accounts.
    2, Remove any Open Firmware passwords or Firmware passwords.
    3. Turn the brightness full up and volume nearly so.
    4. Turn off File Vault, if enabled.
    5. Disable iCloud, if enabled: See.What to do with iCloud before selling your computer
    Step Three - Install a fresh OS:
    A. Snow Leopard and earlier versions of OS X
    1. Insert the original OS X install CD/DVD that came with your computer.
    2. Restart the computer while holding down the C key to boot from the CD/DVD.
    3. Select Disk Utility from the Utilities menu; repartition and reformat the internal hard drive.
    Optionally, click on the Security button and set the Zero Data option to one-pass.
    4. Install OS X.
    5. Upon completion DO NOT restart the computer.
    6. Shutdown the computer.
    B. Lion and Mountain Lion (if pre-installed on the computer at purchase*)
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because
    it is three times faster than wireless.
    1. Restart the computer while holding down the COMMAND and R keys until the Mac OS X
    Utilities window appears.
    2. Select Disk Utility from the Mac OS X Utilities window and click on the Continue button. 
    3. After DU loads select your startup volume (usually Macintosh HD) from the left side list. Click
    on the Erase tab in the DU main window.
    4. Set the format type to Mac OS Extended (Journaled.) Optionally, click on the Security button
    and set the Zero Data option to one-pass.
    5. Click on the Erase button and wait until the process has completed.
    6. Quit DU and return to the Mac OS X Utilities window.
    7. Select Reinstall Lion/Mountain Lion and click on the Install button.
    8. Upon completion shutdown the computer.
    *If your computer came with Lion or Mountain Lion pre-installed then you are entitled to transfer your license once. If you purchased Lion or Mountain Lion from the App Store then you cannot transfer your license to another party. In the case of the latter you should install the original version of OS X that came with your computer. You need to repartition the hard drive as well as reformat it; this will assure that the Recovery HD partition is removed. See Step Three above. You may verify these requirements by reviewing your OS X Software License.

  • How to load time machine on a used macbook pro

    I recently was given a used MacBook pro.  My old MacBooks logic board was going and eventually went, but before it did I used time machine to back it up.  I want to load my time machine macbook info onto the pro.  I cant seem to do this, since TimeMachine just wants to create a new profile for the new Mac on the external.  How can I do this? They are both running the OS X 10.8.2
    Thanks,
    Nate

    Just startup in Recovery mode (Command and R keys held down whilst booting) and boot into your Recovery partition. Make sure that your TM backup is hooked up. In the utility menu, select 'restore from Time Machine' option. You'll be able to choose the drive and the latest TM backup.
    Good luck,
    Clinton

  • How to mirror to tv monitor using macbook pro 2012

    how to mirror to tv monitor using macbook pro 2012.  The airplay is not displayed anywhere except I Tunes which only plays what is on I Tunes.

    Howdy there nell a-7,
    It sounds like you are not seeing the Airplay icon in the menu bar on your Mac but you do see it in iTunes. I would use these steps from the following article to help troubleshoot the issue:
    iOS: Troubleshooting AirPlay and AirPlay Mirroring
    http://support.apple.com/kb/TS4215
    Try these steps first
    Verify that your iOS device's software is up to date.
    Verify your Apple TV's software is up to date.
    Verify that your iOS device has Wi-Fi turned on. Enable Wi-Fi on your iOS device by going to Settings > Wi-Fi.
    All AirPlay-enabled devices must be connected to the same Wi-Fi network.
    Some Wi-Fi network configurations offer a Guest Network. On your Apple TV, go to Settings > General >Network and ensure that you're connecting to the same Wi-Fi network on your iOS device. On your iOS device, tap Setting > Wi-Fi and confirm that this matches your Apple TV.
    If the AirPlay icon doesn't appear
    Ensure that you have followed the steps in using AirPlay and AirPlay Mirroring.If you are still unable to see the AirPlay icon  , try one of the following steps:
    If trying to AirPlay, or AirPlay mirror, to your Apple TV, ensure that AirPlay is enabled on your Apple TV as well. You can enable or disable AirPlay on Apple TV in the AirPlay menu: Settings > AirPlay.
    Check Internet or network connectivity on all affected devices.
    Some content requires an Internet connection to authorize content playback. AirPlay capabilities may be limited if your network is not connected to the Internet.
    If attempting to use AirPlay from a third-party app or a website from your Safari app on your iOS device, confirm that the app or website is AirPlay compatible (refer to the developers of the app or website for additional information).
    Here is some additional information about Airplay for Mac:
    About AirPlay Mirroring in OS X
    http://support.apple.com/kb/HT5404
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • I've just brought myself a new MacBook Pro from a friend I have no idea how to use them I YouTube how to reset a MacBook Pro I done everything all we'll In till you reinstall then it say "this disk is locked"??? Can anyone help me please

    I've just brought myself a new MacBook Pro from a friend I have no idea how to use them I YouTube how to reset a MacBook Pro I done everything all we'll In till you reinstall then it say "this disk is locked"??? Can anyone help me please

    I done everything all we'll In till you reinstall
    Please detail ALL you have done so far in the way of troubleshooting?   Need this info to avoid the been there done that scenarios.
    Care to share which OS you are using?
    Which MBP model do you have? 

  • I just bought a used Macbook Pro. How do I make the changes to make it personal. Example the iTunes comes up as the old user and I have to have his password to make changes on the laptop. Can you make any suggestions?

    I just bought a used Macbook Pro. How do I make the changes to make it personal. Example the iTunes comes up as the old user and I have to have his password to make changes on the laptop. Can you make any suggestions?
    Also I cant make a right click on the pad. Is that normal?

    Your first going to have to remove all your personal data off the machine to a external storage drive, do not use TimeMachine when it asks as this will copy the entire drive and is unnecessary at this time (also takes too long).
    You need to drag and drop copy your personal data folders (Music, Pictures, Movies etc) to a external storage drive, once done, unmount and disconnect this drive.
    Most commonly used backup methods
    Next your going to follow the Zero Erase and install method for your OS X version, either 10.6 or 10.7, here
    How to reinstall just OS X or erase/install OS X
    10.7 requires your AppleID and password to install, so make sure to have that ready.
    Once you reboot your into the real setup of OS X, which will require your name etc, so it's now your machine.
    Install your programs, iLife package is only free for the owner of the machine.
    If you have the 10.6 machine specific disks, then it's on there.
    If your using 10.7, then you'll have to purchase it from the App Store.
    Last, return your files from the storage drive, consider setting up a TimeMachine or clone on the external drive.

  • HT201376 just got a used macbook pro and want to restore to facory settings how do i do is

    I just got a used macbook pro and want to restore to factory settings....how do i do this safely?

    Click here and follow the instructions. If the computer originally shipped with Mac OS X 10.6.8 or earlier, when you reach step 5, insert its original disk, restart with the C or Option key held down, use the Disk Utility to erase the internal drive, and install a fresh OS.
    (118569)

  • I m using macbook pro my enter key is not working suddenly how can i solve this problem?

    i m using macbook pro my enter key is not working suddenly how can i solve this problem?

    I have tried to delete but Com.Apple.keyboardtype.plist is missing therefore I cannot reset the keyboard
    /Library/Preferences/com.apple.keyboardtype.plist

  • How to open Facebook in china using MacBook Pro?

    hello, please to resolve on how to open facebook in China using MacBook Pro.
    Many thanks to all!

    You can't. Want more GPU? You'll have to purchase a new computer.

  • Im using macbook pro ,my version is mac os x 10.4.11 and i cant update anything. how can i update my mac,plzzzz i need a quick answer.

    im using macbook pro ,my version is mac os x 10.4.11 and i cant update anything. how can i update my mac,plzzzz i need a quick answer.

    check that your current Mac meets the System Requirements for Snow Leopard...
    Snow Leopard Specs:
    http://support.apple.com/kb/SP575
    If it does... then you need to Purchase the Snow Leopard Disc and Install it.
    Mac OS X 10.6 Snow Leopard
    Would Also Recommend that you do a Bootable Clone Backup of your current Hard Drive Before attempting any Major Upgrade...
    By far the easiest way to make a Backup, is to use something like
    SuperDuper  http://www.shirt-pocket.com/
    or CCC  http://www.bombich.com/

  • Hey plz help me out!!  i am using macbook pro 10.5.8..... and was using photobooth...and then after some time i opened it and there was no green light on cam, and it displayed nothing! plz tell me how to fix it! i want to see my face again!!! plz help me

    hey plz help me out!!  i am using macbook pro 10.5.8..... and was using photobooth...and then after some time i opened it and there was no green light on cam, and it displayed nothing! plz tell me how to fix it! i want to see my face again!!! plz help me

    iSight troubleshooting
    http://support.apple.com/kb/HT2090

  • I am using MacBook Pro . How can I get or down load menual for Printer HP Laserjet 1018 ? It is not on HP sight .

    Hi,
    I am using MacBook Pro .
    I am not getting menial to use HP LeaserJet 1018 .  It is not available on HP web-sight as well .
    How do I get this suitable to MacBook  pro ?
    Please help me with this.
    Ajit Kanakia

    http://h10032.www1.hp.com/ctg/Manual/c00585348.pdf
    http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/LaserJet-1018-driv er-for-Mac-OS-X-10-8-2/td-p/2294795 says you need to use the 1022 driver.

Maybe you are looking for