How to migrate an OSX 10.5 wiki/blog to 10.7 wiki/blog?

1] I have a new macmini Lion OSX 10.7 server
2] I need to migrate my old 10.5 Leopard server wikis to it.
3] My old OSX 10.5 server was stolen, so I only have an old timemachine backup, in the Backups.backupdb format - not a OSX 10.6 server sparsebundle format.
4] I have migrated using migration assistant, from a backup volume using target disk mode. It recognised the volume fine.
5] All the old files seem to be on the new machine (eg. library/collaboration)
6] However only 1 user has been migrated (the main admin user). There were many other users which have not been migrated.
7] None of the old groups are recognized or migrated
8] None of the old wikis or blogs are recognized or migrated
I have tried repairing file permissions several times and done reinstalls of the operating system, to no effect - using the command-R startup routine.
How can I get the new OSX 10.7 system to register and recognise the users and blogs and wikis migrated from the old OSX 10.5 server backup?

I'm after the same information. This may help:
http://images.apple.com/macosx/server/docs/Upgrading_and_Migrating_v10.7.pdf

Similar Messages

Is it possible to migrate my OS X Lion Wiki to Confluence?

Is it possible to migrate my OS X Lion Wiki to Confluence?
How difficult is the task?

I'm also interested in doing this. There was an undocumented xmlrpc interface to 10.5's wiki server, but I haven't been able to make any progress using it with the Lion wiki. I'll post here if I make any progress.

HT1444 how to migrate from yosemite beta to full vesion

Hi
how to migrate from yosemite beta to full vesion

When I look in "about this mac" - it says Yosemite 10.10. Do I really need to download it again?
I found on a blog that someone contacted the Apple service:
“simply install the final version of the software you are testing when it appears in Software Update” – that means the final version of the beta software you are given to test is what will be made public. So we’re on the same build as what is now in the App Store.
My compute OSX is 10.10 but build is (14A388b) while some say that app store version is (build 14A389).
Does it really make a difference? If I don't download it will it continue to update?

How to migrate BPM 11g server to another BPM 11g server

Hi All,
There is no change on BPM version (BPMN Editor 11.1.1.3.0.6.84 )
just simply a physical migrate, changed application server, DB and server domain/IP
Now we met questions when migrate DB date, there are four schemas DEV_MDS、DEV_SOAINFRA、DEV_ORABAM、DEV_ORASDPM, cannot used including install config settings, could not be used any more, could not be started.
Is there any guide of how to migrate just user data please?
Thanks for any help!
Regards,
Katherine

Migration of environment should really be done through backup tools that ensure a consistent point-in-time view of the data. We recently had a need to use import/export for an environment. I'll post those notes here hopefully save some time if you have to use this approach. But I'll emphasize again that a backup/restore model is the better way to go.
What we did
We took an environment that had a small set of BPM processes and exported the data from the three core schemas.
•     PS2_MDS
•     PS2_SOAINFRA
•     PS2_ORASDPM
We then loaded that data into another domain, started the server, and interacted with the composites that had originally been deployed in another domain.
What we didn’t do
•     Export complex composites. We didn’t have access to things like AIA applications
•     Export large amounts of data
•     Test a broad set of features. We did use Workspace to create roles, view dashboard, and interact with task lists.
What we learned
We believe this confirmed the basic assumption that data can be exported from one BPM/SOA environment, then loaded and run in another environment. However the issues around user privileges, starting queues, etc, highlight the need to test the process in a broader context.
Tools Used
Data Pump
Data Pump is an import/export tool provided by Oracle. A summary of features can be found at:
http://wiki.oracle.com/page/Data+Pump+Export+%28expdp%29+and+Data+Pump+Import%28impdp%29
SQL*Plus
Used to run scripts
Setup
Create Users
The data pump export will include privilege information in the export. And the data pump import will create users in the target database (assuming sufficient privileges for the user running the import). However we found that some roles related to AQ were not granted during the import. To resolve that issue we created scripts to pre-create the schema users and grant required privileges in the target environment.
TODO:
1.     Review the required privileges to see if there are data pump options that would resolve this
2.     Verify that there are no additional privileges needed by applications in the target integration environment.
Create Output Directory
Data Pump needs to have access to the file system from the database.
Make sure that the output directory is writable by the DB process.
From SQL*Plus:
create directory dbexport as '/scratch/ dbexport';
grant read,write on directory dbexport to system;
Export Data For Selected Schemas
The Data Pump tool supports providing a list of schemas to export as part of a single operation. In this test case we exported the following core BPM schemas to a single file. The commands are in the do_exp.sh script.
•     PS2_MDS
•     PS2_SOAINFRA
•     PS2_ORASDPM
TODO:
1.     Verify space required for the target database to ensure that there is sufficient space to export the data.
Import Data into Target Schemas
Data Pump supports mapping schema names and table spaces as part of the import specification. In this case we used the same Oracle instance, so the schemas were mapped to new names. The PS2 prefix was mapped to XYZ.
Note that the OID transform property is required to avoid conflicts with existing object Identifiers.
impdp system/welcome1 DIRECTORY=dbexport DUMPFILE=bpm.dmp transform=oid:n \
REMAP_TABLESPACE=PS2_MDS:XYZ_MDS \
REMAP_TABLESPACE=PS2_SOAINFRA:XYZ_SOAINFRA \
REMAP_TABLESPACE=PS2_IAS_ORASDPM:XYZ_IAS_ORASDPM \
REMAP_SCHEMA=PS2_MDS:XYZ_MDS \
REMAP_SCHEMA=PS2_SOAINFRA:XYZ_SOAINFRA \
REMAP_SCHEMA=PS2_ORASDPM:XYZ_ORASDPM \
TODO:
1.     Check the log for errors. The only errors we saw were related to trying to build stats on empty indexes.
2.     Identify any other schemas being used
3.     Verify if any other transform operators are needed
Post Import
Start Queues
SOA infrastructure makes use of queues in the DB server. While the queue structures were created, they were not started as part of the import. The start_queues.sql script starts the queues.
TODO:
1.     Verify if there are any other queues that need to be started/configured
2.     Verify if there are any other Stream/Queuing configuration tasks needed
Update Data Sources on WLS
Assuming an existing installation of SOA, the datasources need to be updated to use the new schemas.
Start Domain and Verify Logs
It’s important to check the admin and managed server logs for errors related to composite instances and MDS operations.
Verify Composite State
Log into EM and ensure that the state of instances is consistent with the prior state.
Verify Application Roles and Role Mappings
Since the composites are loaded from MDS, there will be no deployment to create application roles. If the environment is using LDAP or DB, then the validation is to check the mappings through Workspace. If the old environment used a file store, then you’d have to crate the role mappings through Workspace.
Verify Workspace Operations on Existing Instances
Verify that task list operations and dashboards are functional.

How to migrate bookmarks etc.. to Safari 5.1

how to migrate bookmarks etc.. to Safari 5.1?

>>... open the Develop menu in the menu bar and select Enable WebGL.
>> ...This seems to have been disabled in later versions of Safari...we are now at OSX 9, Safari 7
Safari 7 on 10.9 : What's been disabled ?

How to migrate rtf Templates in XML Publisher ?

Hi All,
I want the script so that i can download and upload the RTF files directly from my development instance to my production instance.
For this i have come across 3 links
How to migrate rtf Templates in XML Publisher?
http://download.oracle.com/docs/cd/B40089_10/current/acrobat/120xdoig.pdf
unable to migrate physical files using XDO Loader utility
and from here i am running this command from /home/aryan directory
java oracle.apps.xdo.oa.util.XDOLoader DOWNLOAD -DB_USERNAME apps -DB_PASSWORD fnd -JDBC_CONNECTION sharp.apps.com:1522:tst1 -LOB_TYPE TEMPLATE -APPS_SHORT_NAME CUSTOM -LOB_CODE ZEMP -LANGUAGE en -TERRITORY US
but it is giving me error "ksh: java: not found". could anyone can tell me how and from where i have to run the download and upload command
Thanks
Aryan

Hi Hussein,
I tried with applmgr also and still for java -version it is giving me error ksh Java not found
and for which java it is giving me error no java found in different directories path.
Thanks
Aryan

OIM11gR2 - How to migrate an Application Instance Form

Hello,
I'm trying to migrate an Application Instance Form from my Dev env to my QA env.
My target system is SAP
I performed the following steps in Dev:
1. Installed and configured the SAP Connector (no problem here)
2. Created a sandbox
3. Created an Application Instance
4. Created the Application Instance Form
5. Ran a target reconciliation to confirm everything is working properly
6. Exported the sandbox
7. Published the sandbox
8. Via Deployment Manager I exported all objects related to SAP (Resource object, Process Forms, Lookups etc.)
In QA I did:
9. Installed and configured the SAP Connector (no problem here)
10. Via Deployment Manager I imported the objects related to SAP
11. Imported the sandbox
Problem:
To my surprise, the Application Instance does not have a Form in the QA env.
I had to create it manually by performing the following:
12. Create a sandbox
13. Open the Application Instance definition
14. Click on create (to create a form)
15. Entered the same name I used in my Dev environment
16. Received an error message saying that the form already exists
17. Entered a different name for the Form
18. Saved
19. Exported the sandbox (to import in Prd)
20. Published the sandbox
21. Ran a target reconciliation to confirm everything is working properly
I tried to reproduce the problem with another (test) destination environment because I don't want to have the same problem when migrating to Prd.
I repeated the steps 9,10,11 except that I imported the sandbox exported from QA (step 19) instead.
The same problem: Application Instance definition has no Form attached to it in my test destination environment.
If I try to create the form with the same name, it gives an error message saying it is already there.
Is my procedure wrong?
Is there an official procedure explaining how to migrate only Application Instance Form from one env to another?
My env:
OS: Windows 2008 R2 SP1
OIM: 11gR2 BP7
SAP connector: 9.1.2.2.0
Thanks,
Adr

This is a bug: Bug:16027176
Check the [Article ID 1515225.1] which proposes a workaround that might be useful in your case (it was not in mine).
In short the workaround is:
The following order should be observed to export :
- IT Resource & Application instance in one xml
- Request DataSet in another xml
- SysAdmin Sandbox (the one defined while creating the Application Instance and the Form)
- Identity URL Sandbox (defined while customizing the fields on the Form, in the Catalogue page)
Adr

How do I stop OSX from creating ._ thumbnails of network files

Our macs are networked to Windows servers that hold a large amount of image files. These are updated on a continual basis unfortunately the files can't be saved directly to the server but copied blindly into the folder from our macs. The ._ invisible files on the mac appear in windows, not really a big deal (although I would rather they didn't exist a all) The big problem comes when the folders on the server are opened on the mac, it takes forever for the mac to create the little alias or thumbnail files for each image. How do I stop OSX from doing this.

You can stop "some" of those pesky ._invible files with this...
http://docs.info.apple.com/article.html?artnum=301711
Havent seen a way to stop the annoying icon thing, but possibly you could reduce it a bit by using the Finder Pref... Open New Windows in Column mode.

How can I make OSX index a network share for spotlight?

How can I make OSX index a network share for spotlight?
I am using a QNAP NAS with SMB network shares, which I mount with OS X Mavericks. They are not searchable, as far as I know because of the indexing of network share is by default not activated.
To force the OS to index them I activated this via mdutils. But this is no solutions. This makes spotlight to index the share once. But I want spotlight to index it always and keep it up to date. I have a huge amount of documents & fotographs, which is very difficult to manage without being searchable.
Unfortunately the only solution I found in the www was the mdutils-way, which seems not to work, maybe only works not for me.
I would appreciate any assistance,
Thank you,
Stefan

My thanks to everyone who has contributed to solving this problem here.
It appears that there still is NOT a good, reliable solution. Please correct me if I'm wrong.
I did find this on http://jonathansblog.co.uk/how-to-enable-spotlight-indexing-on-a-network-drive:
===================================
To enable spotlight indexing on a network drive:
# mdutil /Volumes/name -i on
To disable the indexing of a connected network drive:
# mdutil /Volumes/name -i off
To check the status of indexing on a connected network drive:
# mdutil /Volumes/name -s
===================================
And, I found this on the Synology NAS forums:
cd /Volumes
mdutil shareName -i on
mdimport -Vp ./shareName
where shareName = name of your share
I have used the mdutil /Volumes/name -i on, and it seems to work.
But, if I understand it correctly, it is a one-time indexing -- the index is NOT keep up-to-date with changes.
So, how can we keep the index up-to-date?
My thought was to schedule a Terminal file to execute each night with the mdutil code.
Would this work? If so, how would you setup a scheduled run?
Would it have to be done on each Mac that accesses the Share?

How to migrate ADE content to a new computer

At some point, everybody needs to upgrade to a new computer.
After reading a great many postings in this forum, it seems obvious to me that many of us would greatly benefit from some specific guidance on how to install Adobe Digital Editions and Sony Reader Library Software (and reader device) or some other e-book application on the new computer, and then move the previously purchased e-book content from the old to new computer in a way that will ensure that the e-books can still be read.
Specifically, I think that some/better guidance needs to be provided on the sequence of steps that must be taken, and the options that should (or should not) be selected to accomplish these actions. For example, does ADE software get installed on the new PC first, or after installing the Sony reader library (or other reader) software? Should we authorize the new computer? How about the portable reader devices (Sony P600), do we leave the content on these or will we need to reload it? Is there a way to ensure the Adobe ID for both SW applications (ADE & Sony Library) are the same so we don't get new or different ID assigned? Will a reader device (which may already contain ebook content) be recognized and automatically resynch with the new computer? and can it move its content from reader to PC, or must the purchased content first be loaded onto the new PC from the old PC, and then be moved (again) to the reader device?
I can't help but think that answers to these (and many other) questions could be far more easily communicated by proactively publishing some basic (if general) procedures for accomplishing common actions like these, rather than repeatedly providing help to each of us after we have already done the wrong thing. While technical help is always greatly appreciated, and it may be easier to address a specific problem, it is more effective to provide information that will help us avoid the problem in the first place, and thus reduce the case load and improve response time.
If I were sufficiently knowledgable to be capable of providing this general guidance myself, I would certainly do so, but count me among the ignorant masses that are simply trying to buy, download, and read their e-books without rendering all their purchased content inaccesible. I certainly wouldn't want to inadvertently provide misinformation that might cause even greater problems.
In short, I think that all of us (forum readers) would greatly like to have some simple instructions presented on what to do, (or not to do), to initially set up our computers and to accomplish other basic functions once this has been done.
Won't somebody with the needed expertise undertake to provide some instructions in this forum?
Thanks (in advance) for you support.
P.S. - Keeping purchased content on original (old) and new computers is NOT an option.

How to migrate ADE from one computer to another:
1.) Ensure that your current content is authorized to an AdobeID
In ADE select "Authorize Computer" from the "Library" menu if it shows you your AdobeID you are good to go.
2.) Copy files - the files are the .epub and .pdf files in your Digital Editions folder in your Documents directory. Alternatively you can simply copy the whole Digital Editions folder. If you copy the whole folder make sure you place it into your Documents directory.
Note: on Windows the folder names are "My Digital Editions" and "My Documents"
3.) Install ADE on the new computer, make sure you enter in the AdobeID from step 1 and the password when asked
The AdobeID that registred and shown (in step1) above is the same for ADE as it is for Sony EBL (the Sony desktop software) - they both pull from the same place.
Unfortunately I don't know the steps for migrating Sony EBL.
For the content on the reader device, you can leave them alone.

How to migrate mails from Google Apps to MS Exchange Online IMAP (Getting error)

Any tips on How to migrate mails from Google Apps to MSOL? What is required? When I am trying to migrate using IMAP but getting fpollowing error
=======================
Summary: 1 item(s). 0 succeeded, 1 failed.
Elapsed time: 00:00:11
[email protected]
Failed
Error:
Failed to log on successfully for the following reason:
Server rejected Basic login with following message : * CAPABILITY IMAP4rev1 UNSELECT LITERAL+ IDLE NAMESPACE QUOTA ID XLIST CHILDREN X-GM-EXT-1 UIDPLUS COMPRESS=DEFLATE.
Exchange Management Shell command attempted:
'Microsoft.Exchange.Transporter.Provider.PopImap.InternetMailboxMeta' | Move-XsIMAPMailboxToExchangeOnline -AllowUnsecureConnection $false -TargetCredential 'System.Management.Automation.PSCredential' -MaxThreadCount '10' -Quiet
Elapsed Time: 00:00:11
======================
Any help will be much appreciated.
Regards
Sunil DK

I just finished migrating a client from Google Apps to Microsoft Exchange Online using the IMAP option in the Microsoft Online Services Migration Tool.
I added the mailboxes by creating a CSV file [i.e. GoogleApps(Gmail)_Mailboxes.csv] in the following format:
SourceIdentity,SourceServer,SourceLoginID,SourcePassword,TargetIdentity
[email protected],imap.gmail.com,[email protected],P@ssword1,[email protected]
[email protected],imap.gmail.com,[email protected],P@ssword2,[email protected]
[email protected],imap.gmail.com,[email protected],P@ssword3,[email protected]
Then I created a custom folder map XML file [i.e. GoogleApps(Gmail)_FolderMap.xml] to map the Google Apps (Gmail) labels to the appropriate Exchange (Outlook) mailbox folders and create those that didn't exist (i.e. Important, Starred, Follow up,
Misc, Priority) as sub-folders under the Inbox:
<?xml version="1.0" encoding="utf-8"?>
<FolderMappings xmlns="http://tempuri.org/FolderMap.xsd">



<Folder path = "INBOX">
<Property SpecialFolder = "Inbox"/>
</Folder>
<Folder path = "New Mail">
<Property SpecialFolder = "Inbox"/>
</Folder>
<Folder path = "[Root]">
<Property SpecialFolder = "Inbox"/>
</Folder>
<Folder path = "">
<Property SpecialFolder = "Inbox"/>
</Folder>
<Folder path = "Calendar">
<Property SpecialFolder = "Calendar"/>
</Folder>
<Folder path = "Tasks">
<Property Name = "Migration items/Tasks"/>
</Folder>
<Folder path = "Sent Items">
<Property SpecialFolder = "Sent Items"/>
</Folder>
<Folder path = "Sent Mail">
<Property SpecialFolder = "Sent Items"/>
</Folder>
<Folder path = "Sent">
<Property SpecialFolder = "Sent Items"/>
</Folder>
<Folder path = "Deleted Items">
<Property SpecialFolder = "Deleted Items"/>
</Folder>
<Folder path = "Trash">
<Property SpecialFolder = "Deleted Items"/>
</Folder>
<Folder path = "Drafts">
<Property SpecialFolder = "Drafts"/>
</Folder>
<Folder path = "Draft">
<Property SpecialFolder = "Drafts"/>
</Folder>
<Folder path = "Junk E-mail">
<Property SpecialFolder = "Junk E-mail"/>
</Folder>
<Folder path = "Spam">
<Property SpecialFolder = "Junk E-mail"/>
</Folder>
<Folder path = "Contacts">
<Property Name = "Migration Items/Contacts"/>
</Folder>
<Folder path = "Outbox">
<Property SpecialFolder = "Outbox"/>
</Folder>
<Folder path = "Journal">
<Property SpecialFolder = "Journal"/>
</Folder>
<Folder path = "Notes">
<Property SpecialFolder = "Notes"/>
</Folder>
<Folder path = "Public Folders">
<Property ExcludeFolder = "true"/>
</Folder>

<Folder path = "[Gmail]/All Mail">
<Property ExcludeFolder = "true"/>
</Folder>
<Folder path = "All Mail">
<Property ExcludeFolder = "true"/>
</Folder>
<Folder path = "[Gmail]/Drafts">
<Property SpecialFolder = "Drafts"/>
</Folder>
<Folder path = "[Gmail]/Important">
<Property Name = "Inbox/Important"/>
</Folder>
<Folder path = "[Gmail]/Sent Mail">
<Property SpecialFolder = "Sent Items"/>
</Folder>
<Folder path = "[Gmail]/Spam">
<Property SpecialFolder = "Junk E-mail"/>
</Folder>
<Folder path = "[Gmail]/Starred">
<Property Name = "Inbox/Starred"/>
</Folder>
<Folder path = "[Gmail]/Trash">
<Property SpecialFolder = "Deleted Items"/>
</Folder>

<Folder path = "Follow up">
<Property Name = "Inbox/Follow up"/>
</Folder>
<Folder path = "Misc">
<Property Name = "Inbox/Misc"/>
</Folder>
<Folder path = "Priority">
<Property Name = "Inbox/Priority"/>
</Folder>
</FolderMappings>
Additionally, I had to tell the Internet E-mail Mailbox Migration Wizard to use the "Individual Account Credentials" option since I was able to specify each account password in the CSV file when adding the mailboxes to Microsoft Online Services Migration
Tools console.
Just to note, the users had to manually export their contacts to a CSV file and calendars to iCal (ICS) files in order to import those items into Outlook.
I hope this will benefit others since Microsoft doesn't seem to have a custom, specifically defined migration strategy for this scenario. With Google Apps being in direct competition with BPOS/Office365, I assumed that Microsoft would have a simple
strategy using something like ActiveSync to facilitate the migration of email, contacts, calendar entries, etc. Hopefully we'll see something along those lines become available in a future release of the migration tools.
--Jon Payne

How do I purchase osx mavericks for a new install?

Sold my Macbook Air to my daughter. How does she load OSx Mavericks after erasing the HD? Get the message that we must use the Apple ID that was used to purchase Mavericks? I can do that except then the machine has my Apple ID not hers.

Did the machine initialy come with Mavericks or with an older OS? Also what is the model number of the Air?
You cannot change the Apple ID from the purchaser you will need to go back to the original OS and then your daughter can upgrade to Mavericks.

How to migrate Mail & Contacts from backup disk of old PPC iMac (10.3.9) to new iMac (10.8.1)?

How to migrate Mail & Contacts from backup disk of old PPC iMac (10.3.9) to new iMac (10.8.1)?
The Firewire disk is connected and have been able to copy across document folders etc, but Migration Assistant doesn't find the disk so that method no good. Any help appreciated.

Thanks, that looks very comprehensive. Wish I'd seen it before completing Set-Up Assistant initially! Will follow his instructions and report back.

I have a 3rd party SSD to put in my mac mini how do i get osx on it i do not have a external hard drive

I want to put a 3rd party SSD in my mac mini and I no how to put in inside the mac mini but, how do I get osx on it preferably Yosemite I do not have a external hard drive just the one that comes with the mac mini and my 3rd party internal SSD please help me.

The easy way is to Purchase an External Enclosure like the Startech USB 3.0 S2510BPU33 with UASP, its a Super Fast connection, SATA 3.1 @ 6 Gb/s.
Just Pop your SSD inside the enclosure and use OS X Disk Utility to clone your existing HDD. This enclosure is So Fast you would not even have to open up your Mini to install the SSD, just Boot Externally you would Never Know the difference and your Warranty won't be affected by opening it up.
What Mini do you have ?
Link to Enclosure http://www.newegg.com/Product/Product.aspx?Item=N82E16817707313&cm_re=startech_3 .0-_-17-707-313-_-Product

How to migrate Oracle 9i(32 bit) to oracle 10g(64 bit) DB with ASM

How to migrate Oracle 9i(32 bit) to oracle 10g(64 bit) DB with ASM on SAME platform RHEL4.0
Scenario My case:
1) DB size 400G.
2) Minimum downtime.
3) oracle 9i(9.2.0.4) source DB.
4) oracle 10g(10.2.0.3) target DB with ASM.
5) Source DB (HOST A) and target DB (HOST B) Machine.
Thanks
Ashutosh

I think Werner is suggesting you ask your question in the appropriate forum.
Go up 2 levels (to Community Discussion Forum) and look for the Database category. It's not that difficult to find, and you will be discussing the question with people who actually care about that kind of question.
The people who read and interact in this forum do so to discuss Documentation questions. Specifically questions about how to improve the documentaiton.

How to migrate an OSX 10.5 wiki/blog to 10.7 wiki/blog?

Similar Messages

Maybe you are looking for