How to Migrate DB2 database to Oracle 10g R2 with this Developer Workbench

Hi
Can anybody tell how to migrate all the data which is present in DB2 to Oracle 10g Release2 through this tool. will it be possible to migrate all the data(tables,stored procedures,views,etc)?.
if anybody knows how to do it please provide me the entire steps for the same.
I am in bad need of help to Migrate my database to Oracle 10g R2
Thanks in expectation,
Selva

Selva,
The link for plugins is: http://www.oracle.com/technology/software/tech/migration/workbench/index.html. You can find DB2 plugins at the bottom of the page.
Regarding the migration procedure, you can start by reading this document:
http://www.oracle.com/technology/tech/migration/workbench/htdocs/101040/user_guide/book.pdf
Good luck,
andrei

Similar Messages

Migrating MySQL5 database to Oracle 10g - table with blob data fails

During data migration phase from MySQL5 to Oracle, noticed that the tables that have record length greater than 64K fails. It just says FINISHED for those tables without migrating any data. This is specially happening in the tables that have text and blob columns with data more than 20Meg in the blob fields.
Is this a bug? If not is ther any configuration file to increase the record size? Does it use SQL*Loader underneath to transfer the data or some other mechanism?

Thanks Spain, but using Offline scripts does not work for me as my record length is around 28MB and SQL*loader allows maximum record length of 20MB.
Is there any way to dump just the blob column data out of MySQL into a separate file?

How to create new database on Oracle 10g

Hi All,
Can any one tell me how to create new database on oracle 10g.
Thanks in Advance for your help.

again some confusion here.....
u said u need a new database in your first post and now you saying u need a new schema..
one database has many schemas(users)..... ex: scott,sys,system are few of them...
now it depends you need seperate database for test,dev environment - this is in the case u have many schemas under each database and many tables(objects) under each schema.
OR
You just need a separate schema (in same db) for test,dev environment...where in you will have multiple tables in each schema...U need to know the dba credentials of the db to create a new schema.
ideally u need to have different database...You can create one with out sys/system(oracle users) password as these passwords are db dependent.
what you need is access to the any machine where server is installed(can be the same mc where you have your dev db or a diff machine) and that will be the machine where your db will be installed (can do it through database configuration assistance),ofcourse you will need windows authentication for this.
so you login to the same machine or access it from your machine using remote login.
I hope that is clear.Hope i am not listing things that you already know..Just did it coz of confusion between db and schema
Message was edited by:
coolguy

How do I connect to a DB2 database from Oracle 10G on linux?

Hi
I have tryed to connect to a DB2 database from oracle 10 G on linux.
I have installed unixODBC and a db2 odbc driver. I can connect to the db2 using isql, but oracle comes with this error:
select * from testtable@acc_spc_gr2
ERROR at line 1:
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Generic Connectivity Using ODBC]DRV_InitTdp: DB_ODBC_INTERFACE (718): ; [C077]
Could not find symbol 'SQLAllocConnect' in dynamic library
DB_ODBC_INTERFACE (722): ; [C079] Failed to load dynamic library
'/opt/ibm/iSeriesAccess/lib/libcwbodbc.so'
ORA-02063: preceding 3 lines from ACC_SPC_GR2
What am I doing wrong? Any one have a guide to do this?
- Jesper

this is my complete configuration
Database_
-bash-3.2$ export ORACLE_SID=XE
-bash-3.2$ sqlplus "/as sysdba"
SQL*Plus: Release 10.2.0.1.0 - Production on Mié Jul 7 10:04:43 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Conectado a:
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
Platform_
Linux srvpdf 2.6.18-164.el5xen #1 SMP Thu Sep 3 04:47:32 EDT 2009 i686 i686 i386 GNU/Linux
*/usr/lib/oracle/xe/app/oracle/product/10.2.0/server/hs/admin/initDB2DATABASE.init*
#This is a sample agent init file that contains the HS parameters that are
# needed for an ODBC Agent.
# HS init parameters
#HS_FDS_CONNECT_INFO = ODBC_DSN
HS_FDS_CONNECT_INFO = prueba
HS_FDS_TRACE_FILE_NAME = /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/hs/admin/DB2DATABASE.log
HS_FDS_CONNECT_INFO = DB2DATABASE
#HS_FDS_TRACE_LEVEL = debug
HS_FDS_TRACE_LEVEL = 0
HS_FDS_SHAREABLE_NAME = /opt/ibm/iSeriesAccess/lib/libcwbodbc.so
# ODBC specific environment variables
set ODBCINI=/etc/odbc.ini
# Environment variables required for the non-Oracle system
set DB2INSTANCE=is400
listener.ora_
# listener.ora Network Configuration File:
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /usr/lib/oracle/xe/app/oracle/product/10.2.0/server)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = DB2DATABASE)
(ORACLE_HOME = /usr/lib/oracle/xe/app/oracle/product/10.2.0/server)
(PROGRAM =hsodbc)
(ENVS = LD_LIBRARY_PATH = /opt/ibm/iSeriesAccess/lib:/usr/lib/oracle/xe/app/oracle/product/10.2.0/server)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(ADDRESS = (PROTOCOL = TCP)(HOST = 172.18.3.32)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 172.18.3.31)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 127.0.0.1)(PORT = 1521))
DEFAULT_SERVICE_LISTENER = (XE)
tnsnames.ora_
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = srvpdf)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = XE)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
DB2DATABASE =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST =localhost )(PORT=1521))
(CONNECT_DATA =
(SERVICE_NAME = DB2DATABASE)
(HS=OK)
odbc.ini_
[prueba]
Description = iSeries Access ODBC Driver
Driver = iSeries Access ODBC Driver
System = xxx.xx.3.2
UserID = xxxxxx
Password = xxxxxx
Naming = 0
DefaultLibraries = QGPL
Database = CHERRYWEB
ConnectionType = 0
CommitMode = 2
ExtendedDynamic = 0
DefaultPkgLibrary = QGPL
DefaultPackage = A/DEFAULT(IBM),2,0,1,0,512
AllowDataCompression = 0
MaxFieldLength = 32
BlockFetch = 1
BlockSizeKB = 128
ExtendedColInfo = 0
LibraryView = 0
AllowUnsupportedChar = 0
ForceTranslation = 0
Trace = 0
odbcinst.ini_
[PostgreSQL]
Description = ODBC for PostgreSQL
Driver = /usr/lib/libodbcpsql.so
Setup = /usr/lib/libodbcpsqlS.so
FileUsage = 1
[iSeries Access ODBC Driver]
Description = iSeries Access for Linux ODBC Driver
Driver = /opt/ibm/iSeriesAccess/lib/libcwbodbc.so
Driver64 = /opt/ibm/iSeriesAccess/lib64/libcwbodbc.so
Setup = /opt/ibm/iSeriesAccess/lib/libcwbodbcs.so
Setup64 = /opt/ibm/iSeriesAccess/lib64/libcwbodbcs.so
UsageCount = 1
CPTimeout =
CPReuse =
System = 172.18.3.2
User = inf5mito
Password = lonco3pue
NOTE1 = If using unixODBC 2.2.11 or later and you want the 32 and 64-bit ODBC drivers to share DSN's,
NOTE2 = the following Driver64/Setup64 keywords will provide that support.
Threading = 2
DontDLClose = 1
ODBC Driver_
-bash-3.2$ cd /opt/ibm/iSeriesAccess/lib
-bash-3.2$ ls -ltr
total 2260
-r-xr-xr-x 1 root root 443939 Apr 5 2008 libcwbxda.so
-r-xr-xr-x 1 root root 94504 Apr 5 2008 libcwbrc.so
-r-xr-xr-x 1 root root 16636 Apr 5 2008 libcwbodbcs.so
-r-xr-xr-x 1 root root 729572 Apr 5 2008 libcwbodbc.so
-r-xr-xr-x 1 root root 998060 Apr 5 2008 libcwbcore.so
and this is my error.
SQL> /
select from display@db2database*
ERROR en línea 1:
ORA-28500: la conexión de ORACLE a un sistema no Oracle ha devuelto este
mensaje:
*[Generic Connectivity Using ODBC][C077] Could not find symbol 'SQLAllocConnect'*
in dynamic library
*[C079] Failed to load dynamic library*
*'/opt/ibm/iSeriesAccess/lib/libcwbodbc.so'*
ORA-02063: 3 lines precediendo a DB2DATABASE
Edited by: user6669081 on 07-jul-2010 6:31

Migrate Ingres database to Oracle 10g

Hi there,
Anyone knows any tool that would help migrate Ingres db to Oracle 10g database? And has anyone does this problem can provide some inputs.
Thanks

Please check in workbench ( oracle), if not then I belive you need make the flat files of data and load in to Oracle.
--Girish

Migrating MySQL5 database to Oracle 10g - refrential integrity constraints

On migrating MySQL5 database to oracle, referential integrity constraints are not migrated to Oracle. Capture stage shows it has captured the constraints but constraints are missing from the Oracle Model. Is this a bug? If not, what I need to do to get constraints migrated.

Check out *URGENT* Does Oracle SQL Developer able to migrate tables relationships?
K.

How to migrate Postgres database to Oracle?

Hi Experts,
Please guide me to migrate Postgres database to Oracle. Postgres database version is 9.2 and it is in Linux server.
can I use Oracle SQL Developer migration tool for migrating from Postgres to Oracle?
Please give valuable suggestions.
Regrads,
Suresh.

As per earlier threads, Oracle SQL developer doesn't support Postgres to Oracle migration hence you need to go for some other tool/approach as listed in my second reply.
such cross RDBMS migrations are done in 2 phases.
Phase 1- Code migration
Phase 2- data migration
In phase 1, you work on DDL conversion for all objects like- tables, views, triggers, procedures, packages, Mviews, in-built function conversion etc. This becomes complex when there is lot of code present since in many cases, you have to re-write the code to make it work in target RDBMS.
in phase 2, it is about migration of table data from source to target. It can be done by simply dumping the table data in CSV format and then using SQL loader kind of tool to load it.
You can also use replication tools like- Oracle Golden Gate and other tools available in market.
Ispirer - Migrate PostgreSQL to Oracle
http://www.swissql.com/products/datamigration/data-migration.html
Thanks,
Abhi

Migration from DB2 database to Oracle 10g

Hi All,
We are working on migration of database from DB2 to Oracle 10g all from scrap. Could you please suggest the steps need to follow up with this and also suggest if any migration tools are available for this task. I am already in a mess of doing it manually. Please help me at the earliest possible.

You can check the list here
http://www.oracle.com/technology/tech/migration/workbench/files/mig_rel10104.html
stored procedure, No
view depends.

How to Switch between Databases in ORACLE 10g?

Hi friends, im using ORACLE 10g.
I have two databases namely ORCL and ORCL1.
First I created ORCL and later ORCL1.
Now I am able to see the tables from ORCL1 only.
How can I switch to ORCL?
Thanks in advance.

Hi Aman, I am posting the results below.
From the command prompt:
C:\>SET ORACLE_SID=ORCL
C:\>SQLPLUS
SQL*Plus: Release 10.2.0.1.0 - Production on Tue Feb 19 18:12:24 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Enter user-name: scott
Enter password:
Connected to:
Oracle Database 10g Release 10.2.0.1.0 - Production
SQL> SELECT * FROM TAB;
TNAME TABTYPE CLUSTERID
DEPT TABLE
EMP TABLE
BONUS TABLE
SALGRADE TABLE
SB4782 TABLE
EDNLN270042 TABLE
CASE_DETAILS TABLE
7 rows selected.
SQL>
And from the SQL*Plus Editor:
SQL> SET ORACLE_SID=ORCL;
SP2-0735: unknown SET option beginning "ORACLE_SID..."
SQL> SELECT * FROM TAB;
TNAME TABTYPE CLUSTERID
DEPT TABLE
EMP TABLE
BONUS TABLE
SALGRADE TABLE
SQL>
So, I am able to get the tables through the command prompt.
But from the SQL*Plus Editor, I am not getting them.
How to get those tables(from ORCL) through the SQL*Plus editor?
Is there any other alternative for setting the ORACLE_SID permanently?
Thank you.

How to migrate a table from ORACLE 10g to 8i

have table named 'liuxg_tab_01' in 10g.
This morning I exported this table using 'exp' and then tried to imp it into 8i, I failed.
After a while, I created a database link named 'ctf' in 8i which connected to 10g. I issued 'create table test as selct * from liuxg_tab_01@ctf',it returns 'ORA-01723'.
Then I extraced the DDL of 'liuxg_tab_01' from 10g with QUEST TAOD, it's:
CREATE TABLE LIUXG_TAB_01
OWNER VARCHAR2(30 BYTE),
OBJECT_NAME VARCHAR2(30 BYTE),
SUBOBJECT_NAME VARCHAR2(30 BYTE),
OBJECT_ID NUMBER,
DATA_OBJECT_ID NUMBER,
OBJECT_TYPE VARCHAR2(19 BYTE),
CREATED DATE,
LAST_DDL_TIME DATE,
TIMESTAMP VARCHAR2(19 BYTE),
STATUS VARCHAR2(7 BYTE),
TEMPORARY VARCHAR2(1 BYTE),
GENERATED VARCHAR2(1 BYTE),
SECONDARY VARCHAR2(1 BYTE)
But I can not create a table using the upper DDL in 8i if I do not wipe off those "BYTES".
After creation of the table using the upper DDL without those 'BYTES', I sucessfully executed 'insert into LIUXG_TAB_01 select * from liuxg_tab_01@ctf'.
Anyone has a better method to move a table from ORACLE 10g to 8i?

1) The particular version of 8i and 10g in use here would be useful. I'm not sure that Oracle supports database links between any version of 8i and any version of 10g, though, so you're probably lucky that it worked as well as it did.
10g 10.1.0.3.0 and 8i 8.1.7.0.0
2) What version of the export utility did you use? You would need to use the 8i version to generate the dump file to have any chance of working, not the 10g verion.
I use the 'exp' provided with 10g 10.1.0.3.0 and 'imp' with 8i 8.1.7.0.0. I have tried to export data directly from 10g 10.1.0.3.0 using 'exp' provided with 8i 8.1.7.0.0. Failed.
3) Why? Since 8i is desupported, there isn't a lot of call for tools to move data from supported releases to unsupported releases.
We have an 8i DB which is still porivding insentive services. We just wanna migrate some tales from 10g to it.
FYI, NLS_LENGTH_SEMANTICS was introduced in 9i, so it's no suprise that 8i objected to the BYTE keyword in the DDL.
What's FYI :P
Another option would be to generate a CSV file of the data from 10g and use SQL*Loader to load it into 8i. Not sure this would be any easier, though.
Justin
Message was edited by:
user510846

Migration from Access to Oracle 10g (Problem with migration wizard)

Hi
I have an access database which I want to migrate to Oracle DB.
I have created 2 connections.
1. Access connection with the source database
2. Oracle connection.
I have associated the oracle connection to the repository.
When I go through 'MIGRATION WIZARD' process. I am not able to view the source database file while capturing. Tried it several times.
Need a help in this
Regards,
Arjun
Edited by: 919650 on Mar 9, 2012 2:47 AM

Arjun,
you cannot do an online migration with MS Access as you can do with other foreign datasources. You can only do an offline migration.
The first step that you need to do is to call the Microsoft Access Exporter. Click on Tools - Migration - Microsoft Access Exporter and chose the exporter of the MS Access version that you are using.
The exporter creates an xml file for you. After the exporter has finished you can do the migration, click on Tools - Migration - Migrate, but in Step 4 please select "Offline", and then you can select the xml file that the exporter has created. The following steps in the Migration assistant are then doing the migration for you.
You might also want to read the chapter "Before Migrating From Microsoft Access" in the online help of SQL Developer.
Regards
Wolfgang

How to migrate oracle 9i database to oracle 10g

Hi All!
Can anyone tell me the steps to migrate oracle database from 9i to 10g.
what are the prerequisite and preliminary thing to consider...
any thing related to migration.
ThanQ.

Which one is better?
Thanks a lot.
itpub888
Re: How to migrate oracle 9i database to oracle 10g
Posted: Aug 12, 2007 11:17 PM
Hi,
u can go for any of the migration steps provided by oracle..say
1.By using DBUA
2.By using PL/SQL scripts provided by oracle like utlu102i.sql
3. Using exp/imp utilities
4. Using Copy
For further info, u can refer 10g upgrade guide available on OTN
Regards
ramesh

Migrate Oracle 9i Database to Oracle 10g Solaris Platform

Hi DBAs,
Thank you very much all of you, you helped me in RMAN Duplicate Database, There was a problem in my backupset and now it has been resolved.
I have now following task.
I want to migrate Oracle 9i Database to Oracle 10g ASM, both are on Solaris platform. Please provide me step by step solution. I have very big Database about 250G Database.

In the "Complete checklist for manual upgrades to 10gR2" is written:
PREREQUISITES
=============
+ Install Oracle 10g Release 2 in a new Oracle Home.
+ Install the latest available patchset from Metalink.
+ Install the latest available Critical Patch Update.
... so "Install the latest available Critical Patch Update" step is that for the Oracle 10g database Oracle Home or Oracle 9i database Oracle Home ? I think that is for the 10g database/ Oracle Home ...
after applying the CPU pacht there is some "Post Installation Instructions":
3.3.5 Post Installation Instructions which demande a connection to the database:
3. For each database instance running out of the ORACLE_HOME being patched, connect to the database using SQL*Plus as SYSDBA and run catcpu.sql as follows:
cd %ORACLE_HOME%\CPU\CPUJan2007
sqlplus /nolog SQL> CONNECT / AS SYSDBA
SQL> STARTUP
SQL> @catcpu.sql
SQL> QUIT
My question is ... If I want to upgrade a 9i database to 10g and I apply this CPU before the upgrade is done (to 10g Oracle Home), how could I connect to an instance which is not present to run this script ? ... is this step mandatory or is optional ?
Thanks,
P.

Migrating from MS SQL Server 2005 database to Oracle 10g

Hello,
I wanted the full procedure or steps to Migrate the MS SQL Server 2005 database to Oracle 10g. Is there a known procedure to do this or is there a tool which is used?
I have not done migration of database from MS SQL Server to Oracle. Any help is appreciated. Thanks a lot for the time.
Regards,
RPS

Wrong forum, go to the database forum!
cu
Andreas

How do l create a new database in Oracle 10g Express

How do l create a new database in Oracle 10g Express, other than the one that is created on installation?

Hello,
You cannot create a second XE database on the same server.
But, Oracle database can support as many Schema as you want.
"Oracle database" is like "SQL Server Instance" and "Oracle Schema" is like "SQL Server database". I means by this shortcut that for
the end users accessing to different Schemas looks like accessing to different databases.
You can have several applications on the same database. Each application has its own Schema and Datafile (Tablespace) structure.
So on your XE database you can add a new Tablespace and create a new User/Schema as follows:
sqlplus /nolog
connect / as sysdba
create tablespace {color:red}new_tablespace_name{color}
extent management local autoallocate
SEGMENT SPACE MANAGEMENT AUTO
datafile '{color:red}complete_datafile_name{color}' size 100M autoextend on next 10M maxsize unlimited;
create user {color:red}new_schema_name{color} identified by {color:red}password{color}
default tablespace {color:red}new_tablespace_name{color}
temporary tablespace TEMP
quota unlimited on {color:red}new_tablespace_name{color}
grant connect, resource to {color:red}new_schema_name{color};Then you can connect to this new User/Schema as you defined it and create your new structure and load datas.
Hope it can help.
Best regards,
Jean-Valentin

How to Migrate DB2 database to Oracle 10g R2 with this Developer Workbench

Similar Messages

Maybe you are looking for