How to migrate IronPort email security from C350 (6.5) to C370 (7.6)

Hello
i have two IP C350 running ios version 6.5, in a cluster mode and would need to know what would be the best (and quickest) way to replace existing units and migrate current configuration from both IPs and have established cluster again.
Old IPs are C350, running AsyncOS 6.5.3-007. New units are two C370, running IOS AsyncOS 7.6.1
If there is any how-to with steps required that you guys are aware of and would like to share would be awesome.
Appreciated.

I have completed upgraded of the one ironport out of two. I had issues with clustering since i run upgrade from the GUI (GUI inform you that it would need to disconnect the unit from the cluster in order to perform the upgrade).
Answering Yes to this the upgrade starts and finishes with no issue. But when you try to migrate config from old unit to the new unit, whole bunch of messages pops out related to cluster, ports, Ethernet, etc. And i put netwrok config part from new unit to the config.
The CLI at the old unit shows that unit is disconnected from the cluster and not removed, so command to remove the unit from the cluster was issued. After reboot, i export the config from the old unit, made changes to the network part (ports, ethernet, MAC address) and import the config into new unit with no issues.
Now, i have one new unit handling email and one old unit waiting for replacement. No cluster existis between these units at this point.
So, for second unit, i will do:
from CLI remove old unit from the cluster.
run the upgrade
reboot
export configuration and make changes to the network part.
import config to the new unit and cross fingers (the cross finger method works very well from time to time).
recreate a cluster.
Will update the thread once all is done.

Similar Messages

How to Migrate Row Level Security Configuration

Hi Guys,
Does anybody know how to migrate row level security configuration? I suppose PeopleSoft provided a data mover script, like securityexport.dms.
Thank you in advance,
Bob

Here are two options to achieve what you want.
A. You can do this by coding, that's if you are ready to. Are you? If yes then try the steps below:
1. create a security codes table. Say for example
001 - company a
002 - company b
2. create a security table that will list all users and which company they should have access to. You can also implement this by roles.
3. alter all tables in the application schema to add a security code column. This will be a foreign key reference to table created in 1 above.
4. update all data in the tables according to which company they belong to.
5. write a procedure or package that does a validity check whenever a user requests for data. This procedure/package determines which company data the user has access/rights to.
With this, you should be able to achieve what you want if you do not want to spend on VPD and FGAC. The problem comes where there are users who would have cross access to data from both companies. In this regard, then you have to modify your security table a little bit to handle this.
B. This option i will admit is not so clean. You can also achieve this by two different views for every table in the application schema. And on each of these views, create a private synonym for every user. For illustration purposes:
Table name = Employee.
Create a view employee_a on employee
create a view employee_b on employee
Let's say you have users x and y. X has access to employees of company a and y has access to employees of company b. You can now create private synonyms for each of these users as follows:
create synonym employee on employee_a in x schema.
create synonym employee on employee_b on y schema.
This i have not tried but believe should work.
Hope one of these options serve your purpose.

Cisco Ironport Email Security inline with Microsoft Forefont

Hi,
We are going to deploy Cisco C370 Email security appliance as new email relay in our DMZ. Currently Microsoft Forefont is already doing the same functionality and new Ironport email security appliance will be added as 1st layer of email security.
I would like to know what are the changes that we should consider in this deployment in order to forward mail to Forefont, is there any specific configuration on both products and what is the best method of deployment etc.
Also I would appreciate if there is any Cisco/Microsoft documentation available for such deployment senario.
thanks in advance.

Hello pemasirid,
as far as I can see from your description is that you add the ESA C370 as an additional gateway, so I would say there is little you need to change in your current network design. As this is all about SMTP getting forwarded, you basically just need to take care of the following things:
On Forefront: Allow injections from the ESA(s) and forward all outbound messages to the ESA
On the ESA(s): Insert the Forefront IPs into the RELAYLIST of the private listener to allow outbound messages. Also set up an SMTP route to forward inbound messages to the Forefront server.
Also change public DNS to point to the public IPs of the ESAs, in case they are different from what you have used before
A good starting point for deploying would be the Quickstart Guide for C370, that you can find in the support section for email security on Cisco.com. Also, the user guide, which is also available on the GUI of every email appliance (GUI: Help and Support -> Online Help).
Hope that helps,
Andreas

How to delete multiple email messages from my Iphone 5c; email folder?

How to delete multiple email messages from my Iphone 5C; email folder.

there used to be option to keep last 50,100,200 messages/emails. We need that back. This is ridiculous to delete one by one.

Don't know how to access my email away from home

i don't know how to access my email away from home.
can't find webmail or email options.
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; AOL 9.1; AOLBuild 4334.5009; Windows NT 6.0; Trident/4.0; GTB6.3; SLCC1; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30618)

Somehow I got it to work, a whole lot easier than i thought, kind of scary how easy... but Im not exactly sure what of several things is how I got it. Scariest thing; watching my iBook I wouldn't know that I was accessing it from the MB. It's only me doing it, but still seems so easy.
If I have a WPA2 password protected wireless network do I have to worry that others can access it so easily? (not that I have anything interesting, it's just the general privacy paranoia)

TS3899 tell me how to transfer my email addresses from my laptop to my ipad mini

SOMEBODY TELL ME HOW TO LOAD MY EMAIL ADDRESSES FROM MY LAPTOP ONTO MY IPAD MINI AND KEEP IT SIMPLE...I'M PRETTY NEW AT ALL THIS (AND OLD TOO)

Hello there Angela,
I was looking for some resources on syncing your Mail accounts from your computer to your iPad.
In our article named iOS: How to transfer or sync content to your computer found here: http://support.apple.com/kb/HT1296. This section in particular will get you started:
USB syncing
Open iTunes.
Connect the iOS device (your iPad) to your computer using the included USB cable and select it in iTunes under Devices on the left-hand side. Some tabs may not appear if you do not have corresponding content in your library. For example if you do not have any podcasts in your library, the corresponding Podcast tab will not appear.
When you see that bar you want to click Info, and there will be a checkbox there to Sync Mail Contacts. Check the box, then click Apply in the lower right corner of the iTunes window.
All the best,
Sterling

HT201320 I don't understand how to transfer my email contacts from my Windows laptop to my iPhone? What do I need to do?

I don't understand how to transfer my email contacts from my Windows laptop to my iPhone? What do I need to do?

Hey wahanz!
In order to sync your Windows contacts to your iPhone, you will need to first create an iCloud account:
Creating an iCloud account: Frequently Asked Questions
http://support.apple.com/kb/ht4436
You will create the iCloud account on your iOS device, and when you do, don’t forget to turn on contact syncing in the initial setup. Then you will want to download the iCloud control panel for Windows onto your computer and install it:
iCloud Control Panel 3.1 for Windows
http://support.apple.com/kb/dl1455
Make sure that your contacts are in Outlook, as that is the supported way of syncing your contacts to iCloud, then make sure you have the contact syncing enabled in the iCloud control panel on your computer, and when the contacts have synced, they will be available on your iOS device! Thanks for using the Apple Support Communities. Have a good one!
-Braden

How can I export email addresses from apple mail?

How can I export email addresses from Apple Mail?
Just to be CRISTAL CLEAR please don't reply with export instructions from the address book.....not interested in this.
I have customers that fill-out a request form online, then the data is sent to our database on our server, and another copy is sent to my email account. The server database got corrupted and is now lost. The only data left are in my email app called APPLE MAIL. I have created Filtered Folders so the data is just in one Folder, not mixed with all other emails. Is there a way to export the email names & addresses from APPLE MAIL to a CVS file or Excel file?
Again this is not a question related to Apple Address Book. This is ONLY for Apple MAIL exporting!
Thanks

There is a collection of AppleScripts called Mail Scripts you can download at this link.
http://homepage.mac.com/aamann/Mail_Scripts.html
The script to use from the collection of scripts is Add Addresses (Mail) which adds addresses found in the selected messages (in the header fields "From", "To", "Cc", and "Bcc") to the Address Book. This is much more flexible than the "Add Sender to Address Book" available in Mail and provides a convenient way for creating mailing lists.

HOW TO IMPORT MY EMAILS (MESSAGES) FROM OUTLOOK 2007?

HOW TO IMPORT MY EMAILS (MESSAGES) FROM OUTLOOK 2007?

Into what email program on the Mac?
Mail
Outlook for Mac '11
Entourage '04/'08
Thunderbird
Eudora
... etc
If it's going into Mail you'll need to do a work around, it's not a "straight" transfer unless you buy a 3rd party application called Outlook2Mac.
http://www.trickyways.com/2010/08/how-to-transfer-emails-from-outlook-to-apple-m ail/

How to migrate a web app from JDev 904 to JDev10132?

Hi,
I'm looking for any recommendation on how to migrate a web application from JDev 904 to JDev 10132? The application uses BC4J, Struts and DataTags.
Is there tool support to migrate from DataTags to ADF DataBinding?
Any hints are welcome.
Thanks,
Markus

There is no automated migration of jbo data tags to the new binding architecture.
see:
http://www.oracle.com/technology/products/jdev/htdocs/10.1.3.0.3/desupport1013g.html

How to delete an email simultaneously from iPad and iMac?

How to delete an email simultaniously from iPad and iMac?

If you have iCloud activated on both that's what will happen.

How to migrate the data flow from DB CONNECT sourse system from 3.5 to BI

Hi
can any one tell me how to migrate the data flow from DB CONNECT sourse system from 3.5 to BI 7.

Hi,
Go to Infoprovider to which your DB connect DS feeds and Right Click on Data source-> Then Migrate-> With Export---> You have to build new 7.0 Transformations and DTP's etc.
~AK

How to migrate thunderbird email from pc to mac version

I have been unsuccessful in locating proper information on how to migrate a windows version of TB to the MAC version. Seems to be no clear cut way to do that.
Any suggestions?

Install TB on the Mac, but don't bother installing any accounts. Close TB. Overwrite its new empty profile with one copied from your Windows installation.
Speaking as someone who has successfully moved TB profiles between Windows and Linux, I can warn you that there may be some Windows-specific pathnames in your profile that will need to be fixed. Some add-ons are poorly behaved in that they store absolute pathnames, which do not work when transferred from one computer to another of the same kind, let alone when transferred between operating systems. If your profile has been tweaked to store its data on a separate drive, for instance, you'll need to adjust the path stored in ''profiles.ini''. either by direct hand-editing, or by use of the profile manager.
Profiles:
https://support.mozilla.org/en-US/kb/profiles-tb
http://kb.mozillazine.org/Profile_Manager

How do I transfer email messages from an external hard drive to a new hard drive with Lion installed as the operating system?

How can I retrieve the old email messages from Mail on an external hard drive which operated with Snow Leopard, then transfer the old Emails into my current version of mail operating with Lion?

'''https://support.mozilla.org/en-US/kb/recovering-important-data-from-an-old-profile'''
'''https://support.mozilla.org/en-US/kb/back-and-restore-information-firefox-profiles'''
These can't get your data back, but will help in the future.
These add-ons can be a great help by backing up and restoring Firefox
'''[https://addons.mozilla.org/en-US/firefox/addon/febe/ FEBE (Firefox Environment Backup Extension)]''' {web link}
FEBE allows you to quickly and easily backup your
Firefox extensions, history, passwords, and more.
In fact, it goes beyond just backing up -- It will actually rebuild
your saved files individually into installable .xpi files.
It will also make backup of files that you choose.
'''[https://addons.mozilla.org/en-US/firefox/addon/opie/ OPIE]''' {web link}
Import/Export extension preferences

How to migrate user's data from Panther G3 to MacBook Snow Leopard?

Migration Assistant isn't helping at the moment. Over the network, it just spins saying "looking for other computers" even though I've seen and acted on http://support.apple.com/kb/HT3253 -- although that doesn't relate to Panther so it isn't right for that. Anyway, so I forget doing it over the network.
I copy two users' entire directories on the Panther G3 machine to an external hard drive. I plug that into the MacBook, open Migration Assistant and choose from a disk. Now it just spins indefinitely where it's supposed to allow me to select the disk -- it can't even show the disk (the disk has mounted fine).
I'm now thinking Migration Assistant is completely useless -- better not touched?
So I haven't got a clue how to get two users from a G3 machine to the new MacBook. Any suggestions? Thanks.

Interestingly, it looks like a mounted disk image of a full system is recognized by Snow Leopard's Migration Assistant. Although the disk image is not bootable, it presents as a separate volume "with OS X installed", and apparently this is enough.
One of my external drives contains a sparsebundle disk image of my oid G5 Leopard Mac that I created with either CCC or SuperDuper just before that computer died. I just tried mounting it by double-clicking it, and then running Snow Leopard's Migration Assistant, choosing the option to migrate "From a Time Machine backup or other disk." The mounted volume was recognized as a "disk", and all its contents were accessible as items to migrate. I didn't actually run it.
CCC makes it easy, though, to protect the other stuff as you suggested and then clone to the whole partition rather than to a disk image.

How to migrate IronPort email security from C350 (6.5) to C370 (7.6)

Similar Messages

Maybe you are looking for