How to migrate LV 5 vi to LV8.5 - do I need to install V6, V7...

Hi
Have several large app's last worked on in LV5.1.1; these apps need updating to LV8+ now. Will I have to install LV6 in a machine, migrate the applications, install LV8, migrate the applications, install 8.0, migrate the applications, and then install 8.5 to finish the process. My bet is, there will be a large amount of effort involved.
Thanks
Blair Smith

Hi Blair,
Here is a link with a table that explains what versions of labview you can convert your VIs to:
http://digital.ni.com/public.nsf/allkb/7B7AC79F7742D492862570E7007E2387?OpenDocument
All you have to do is install any version newer than 5.1 and earlier than 8.5, followed by your 8.5 installation.
Let me know if you have any issues.
How many VIs are you converting? If it is only a few I can convert them for you and then you can save yourself the installation of an intermediate version.
Sappster

Similar Messages

I purchased my first iMac n I installed parallel how can I transfer my pc document? Do I need to install window 7?, I purchased my first iMac n I installed parallel how can I transfer my pc document? Do I need to install window 7?

I purchased my first iMac n I installed parallel how can I transfer my pc document? Do I need to install window 7?, I purchased my first iMac n I installed parallel how can I transfer my pc document? Do I need to install window 7?

Your post is very confusing. It sounds like you want to run Windows 7 using Parallel's software. If so yes you need a full license of Windows 7 and will need to purchase it. Please follow the instructions in the manual you got when you bough Parallel's and if you have difficulty following them you can find support for their product on the Parallel's forums at:
http://forum.parallels.com/forum53.html
Roger

How to migrate iTunes and iPhone info to Lion on a clean install?

Hello everybody:
I've been using Lion for a while now, and I finally want to take the leap. My idea is to migrate from SL to Lion -now I have 2 partitions, one with Lion, one with SL-, but with a clean install, so all the garbage I have in SL will be deleted, so I can get a fresh start (with my documents and other stuff, of course). My question regards my iPhone and all the things iTunes normally backups. How can I migrate those? I want to avoid that iTunes tells me that I'm on a new computer, so it has to erase everything. Is there a way to do that? Also, what about my apps? I think those that are installed through a .pkg will not work if I move the .app from one /Applications folder to another but, what about those that are Lion-compatible and are only a .app archive? They'll work, right?
I think those are my main doubts for now. Thank you in advance for your answers!
F

You may want to use Setup Assistant - available only once at the beginning of a new install - you do not really want to use Migration Assistant. Although they are essentially the same procedure, Setup sets up your account once and transports over the settings, etc.; whereas Migration Asst comes in later after you've already established an account resulting in duplicates in accounts, folders, and messed up Permissions. I used it once.
Time Machine would be a good way - youc an get some excellent info here:
http://web.me.com/pondini/Time_Machine/Home.html

How to migrate Sun One directory server to a new physical server install

need help
We have to move our existing installation of sun on directory server 5.2 to a new physical server.
We have a new physical server with a new host name. I am trying to find an easiest way to take a snapshot of our existing server and put it on a new installation
So will installing sun one directory server , its shows me two choices either to create a new instance or copy configuration from a existing server
What do i choose and which is the fastest route to replicate my old server
Thanks a bunch in advance
Sganb

Hi,
I'm glad you're still using the old, glorious Sun One Directory Server 5.2, because it brings me back a lot of memories... But are you seriously talking of the 'plain' version, with no patches/hot fixes on top? If that's the case, you're using of a software that has been developed in 2004 and released in Jan 2005! Just for you to be aware, in the last *8* (eight) years a considerable number (in the magnitude of 10^3) of bugs, security problems and performance issues has been identified and fixed...
However, to provide a better answer to your question, it would be important to understand the 'big picture' in terms of scenario and requirements:
1) Is this a critical 24x7 service for which you need to perform an on-line migration or you have a 'maintenance window' during which the service may be switched off?
2) Is the old server member of replication environment? If yes, how many masters/slaves do you have already? Shall the new server be part of this topology? What role shall it have?
3) Would it be possible to make the the old server able to communicate with the new server?
4) How big is the database that you've got to migrate? Do you have any requirement in terms of caches?
5) Do you take backups on a regularly basis and have in place working (*tested*) backup/restore procedures?
6) Is the new server conserving or changing the O.S. and architecture? [SPARC->SPARC, x86->x86, SPARC->x86, Solaris -> ? , 32 .vs. 64-bit? ]
7) What are the steps you did to 'install' the software on the new server?
Thanks,
Marco
P.S.: I don't wanna sound 'scaring' with all these questions, neither this should be intended as an 'hidden advertising' for Oracle Professional/Consulting Services, but the only way to not put in jeopardy your data is being aware of the risks, having the control of what's going on and ... possibly have a 'B' plan ;-)
P.S.S.: My last suggestion is to consider a migration to a later release AS SOON AS POSSIBLE; the latest is ODSEE 11.1.1.7, which is available here:
http://www.oracle.com/technetwork/middleware/downloads/oid-11g-161194.html
and seems to work pretty well ;-)

HT2305 how do i get administrator priveleges for the folder i need to install itunes..

I have tried for 2 entire days of my weekend now - to simply REINSTALL i tunes....I am the admin on the user acct....admin on the browser im using...disables Norton totally....WHAT AM I DOING WRONG?? i AM NOT AN IDIOT WHEN I COMES TO COMPUTER ISSUES...HATE TO BE DEFEATED...BY A PC...REALLY....
SO what is the deal with the download not finishing b/c of Admin CRAP....it says I cant finish the download as I dont have admin rights...NOT TRUE...Ive installed and reinstalled...SOMEONE PLEASE HELP ME....STEP BY STEP ON THIS = PLEASE...

Hi David,
In 8.5 or 8.6, there is a shipping example that contains the filter design subVI you need:
examples\R Series\FPGA Fundamentals\Analysis and Control\Filter and DC-RMS\Using Reconfigurable Butterworth Filter - R-series.lvproj
In LabVIEW 2009, there is a new palette under My Computer: FPGA Interface>>Scaling, with a new Butterworth Coefficients VI on it. That will produce the quantized coefficients you need in the format expected by the FPGA Butterworth Filter.
Regards,
Jim

How to migrate cc from old to new computer

how to migrate cc from present iMAC to new iMAC?

Just install the same way you did originally. Download/install the desktop application, sign in, install the subscription application(s). You are allowed to have two working installations so you can keep the original intact if you like. If you prefer not to then you should sign out of the old installation as a minimum.
Creative Cloud for desktop
https://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html
Sign out, Sign in | Creative Cloud desktop app
http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html
Activation & deactivation help
https://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html#a ctivate-how-to
Install, update, or uninstall apps
http://helpx.adobe.com/creative-cloud/help/install-apps.html
Installing Creative Cloud Apps
http://tv.adobe.com/watch/cs6-creative-cloud-feature-tour-for-video/installing-desktop-app s-from-creative-cloud/

How to Migrate MS Project Server 2007 to 2013

Hi
Can any one share some reference for migrating Project Server 2007 to 2013.
As in general process--
We can take the backup and and restore it in 2013 environment.
How to migrate Portfolio Server?
After restroring any steps need to be followed.
Please guide.
Thanks
Geeth If you feel that the answer which i gave you is Helpful please select it as Answer/helpful.

Hello,
For Portfolio Server 2007 options, review this guide:
http://www.microsoft.com/en-us/download/details.aspx?id=20815
Also see:
http://blogs.technet.com/b/projectadministration/archive/2010/07/21/anouncing-project-portfolio-server-2007-migration-documentation-to-project-server-2010-just-released.aspx
Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS

How to migrate rtf Templates in XML Publisher ?

Hi All,
I want the script so that i can download and upload the RTF files directly from my development instance to my production instance.
For this i have come across 3 links
How to migrate rtf Templates in XML Publisher?
http://download.oracle.com/docs/cd/B40089_10/current/acrobat/120xdoig.pdf
unable to migrate physical files using XDO Loader utility
and from here i am running this command from /home/aryan directory
java oracle.apps.xdo.oa.util.XDOLoader DOWNLOAD -DB_USERNAME apps -DB_PASSWORD fnd -JDBC_CONNECTION sharp.apps.com:1522:tst1 -LOB_TYPE TEMPLATE -APPS_SHORT_NAME CUSTOM -LOB_CODE ZEMP -LANGUAGE en -TERRITORY US
but it is giving me error "ksh: java: not found". could anyone can tell me how and from where i have to run the download and upload command
Thanks
Aryan

Hi Hussein,
I tried with applmgr also and still for java -version it is giving me error ksh Java not found
and for which java it is giving me error no java found in different directories path.
Thanks
Aryan

OIM11gR2 - How to migrate an Application Instance Form

Hello,
I'm trying to migrate an Application Instance Form from my Dev env to my QA env.
My target system is SAP
I performed the following steps in Dev:
1. Installed and configured the SAP Connector (no problem here)
2. Created a sandbox
3. Created an Application Instance
4. Created the Application Instance Form
5. Ran a target reconciliation to confirm everything is working properly
6. Exported the sandbox
7. Published the sandbox
8. Via Deployment Manager I exported all objects related to SAP (Resource object, Process Forms, Lookups etc.)
In QA I did:
9. Installed and configured the SAP Connector (no problem here)
10. Via Deployment Manager I imported the objects related to SAP
11. Imported the sandbox
Problem:
To my surprise, the Application Instance does not have a Form in the QA env.
I had to create it manually by performing the following:
12. Create a sandbox
13. Open the Application Instance definition
14. Click on create (to create a form)
15. Entered the same name I used in my Dev environment
16. Received an error message saying that the form already exists
17. Entered a different name for the Form
18. Saved
19. Exported the sandbox (to import in Prd)
20. Published the sandbox
21. Ran a target reconciliation to confirm everything is working properly
I tried to reproduce the problem with another (test) destination environment because I don't want to have the same problem when migrating to Prd.
I repeated the steps 9,10,11 except that I imported the sandbox exported from QA (step 19) instead.
The same problem: Application Instance definition has no Form attached to it in my test destination environment.
If I try to create the form with the same name, it gives an error message saying it is already there.
Is my procedure wrong?
Is there an official procedure explaining how to migrate only Application Instance Form from one env to another?
My env:
OS: Windows 2008 R2 SP1
OIM: 11gR2 BP7
SAP connector: 9.1.2.2.0
Thanks,
Adr

This is a bug: Bug:16027176
Check the [Article ID 1515225.1] which proposes a workaround that might be useful in your case (it was not in mine).
In short the workaround is:
The following order should be observed to export :
- IT Resource & Application instance in one xml
- Request DataSet in another xml
- SysAdmin Sandbox (the one defined while creating the Application Instance and the Form)
- Identity URL Sandbox (defined while customizing the fields on the Form, in the Catalogue page)
Adr

How to migrate ADE content to a new computer

At some point, everybody needs to upgrade to a new computer.
After reading a great many postings in this forum, it seems obvious to me that many of us would greatly benefit from some specific guidance on how to install Adobe Digital Editions and Sony Reader Library Software (and reader device) or some other e-book application on the new computer, and then move the previously purchased e-book content from the old to new computer in a way that will ensure that the e-books can still be read.
Specifically, I think that some/better guidance needs to be provided on the sequence of steps that must be taken, and the options that should (or should not) be selected to accomplish these actions. For example, does ADE software get installed on the new PC first, or after installing the Sony reader library (or other reader) software? Should we authorize the new computer? How about the portable reader devices (Sony P600), do we leave the content on these or will we need to reload it? Is there a way to ensure the Adobe ID for both SW applications (ADE & Sony Library) are the same so we don't get new or different ID assigned? Will a reader device (which may already contain ebook content) be recognized and automatically resynch with the new computer? and can it move its content from reader to PC, or must the purchased content first be loaded onto the new PC from the old PC, and then be moved (again) to the reader device?
I can't help but think that answers to these (and many other) questions could be far more easily communicated by proactively publishing some basic (if general) procedures for accomplishing common actions like these, rather than repeatedly providing help to each of us after we have already done the wrong thing. While technical help is always greatly appreciated, and it may be easier to address a specific problem, it is more effective to provide information that will help us avoid the problem in the first place, and thus reduce the case load and improve response time.
If I were sufficiently knowledgable to be capable of providing this general guidance myself, I would certainly do so, but count me among the ignorant masses that are simply trying to buy, download, and read their e-books without rendering all their purchased content inaccesible. I certainly wouldn't want to inadvertently provide misinformation that might cause even greater problems.
In short, I think that all of us (forum readers) would greatly like to have some simple instructions presented on what to do, (or not to do), to initially set up our computers and to accomplish other basic functions once this has been done.
Won't somebody with the needed expertise undertake to provide some instructions in this forum?
Thanks (in advance) for you support.
P.S. - Keeping purchased content on original (old) and new computers is NOT an option.

How to migrate ADE from one computer to another:
1.) Ensure that your current content is authorized to an AdobeID
In ADE select "Authorize Computer" from the "Library" menu if it shows you your AdobeID you are good to go.
2.) Copy files - the files are the .epub and .pdf files in your Digital Editions folder in your Documents directory. Alternatively you can simply copy the whole Digital Editions folder. If you copy the whole folder make sure you place it into your Documents directory.
Note: on Windows the folder names are "My Digital Editions" and "My Documents"
3.) Install ADE on the new computer, make sure you enter in the AdobeID from step 1 and the password when asked
The AdobeID that registred and shown (in step1) above is the same for ADE as it is for Sony EBL (the Sony desktop software) - they both pull from the same place.
Unfortunately I don't know the steps for migrating Sony EBL.
For the content on the reader device, you can leave them alone.

How to migrate mails from Google Apps to MS Exchange Online IMAP (Getting error)

Any tips on How to migrate mails from Google Apps to MSOL? What is required? When I am trying to migrate using IMAP but getting fpollowing error
=======================
Summary: 1 item(s). 0 succeeded, 1 failed.
Elapsed time: 00:00:11
[email protected]
Failed
Error:
Failed to log on successfully for the following reason:
Server rejected Basic login with following message : * CAPABILITY IMAP4rev1 UNSELECT LITERAL+ IDLE NAMESPACE QUOTA ID XLIST CHILDREN X-GM-EXT-1 UIDPLUS COMPRESS=DEFLATE.
Exchange Management Shell command attempted:
'Microsoft.Exchange.Transporter.Provider.PopImap.InternetMailboxMeta' | Move-XsIMAPMailboxToExchangeOnline -AllowUnsecureConnection $false -TargetCredential 'System.Management.Automation.PSCredential' -MaxThreadCount '10' -Quiet
Elapsed Time: 00:00:11
======================
Any help will be much appreciated.
Regards
Sunil DK

I just finished migrating a client from Google Apps to Microsoft Exchange Online using the IMAP option in the Microsoft Online Services Migration Tool.
I added the mailboxes by creating a CSV file [i.e. GoogleApps(Gmail)_Mailboxes.csv] in the following format:
SourceIdentity,SourceServer,SourceLoginID,SourcePassword,TargetIdentity
[email protected],imap.gmail.com,[email protected],P@ssword1,[email protected]
[email protected],imap.gmail.com,[email protected],P@ssword2,[email protected]
[email protected],imap.gmail.com,[email protected],P@ssword3,[email protected]
Then I created a custom folder map XML file [i.e. GoogleApps(Gmail)_FolderMap.xml] to map the Google Apps (Gmail) labels to the appropriate Exchange (Outlook) mailbox folders and create those that didn't exist (i.e. Important, Starred, Follow up,
Misc, Priority) as sub-folders under the Inbox:
<?xml version="1.0" encoding="utf-8"?>
<FolderMappings xmlns="http://tempuri.org/FolderMap.xsd">



<Folder path = "INBOX">
<Property SpecialFolder = "Inbox"/>
</Folder>
<Folder path = "New Mail">
<Property SpecialFolder = "Inbox"/>
</Folder>
<Folder path = "[Root]">
<Property SpecialFolder = "Inbox"/>
</Folder>
<Folder path = "">
<Property SpecialFolder = "Inbox"/>
</Folder>
<Folder path = "Calendar">
<Property SpecialFolder = "Calendar"/>
</Folder>
<Folder path = "Tasks">
<Property Name = "Migration items/Tasks"/>
</Folder>
<Folder path = "Sent Items">
<Property SpecialFolder = "Sent Items"/>
</Folder>
<Folder path = "Sent Mail">
<Property SpecialFolder = "Sent Items"/>
</Folder>
<Folder path = "Sent">
<Property SpecialFolder = "Sent Items"/>
</Folder>
<Folder path = "Deleted Items">
<Property SpecialFolder = "Deleted Items"/>
</Folder>
<Folder path = "Trash">
<Property SpecialFolder = "Deleted Items"/>
</Folder>
<Folder path = "Drafts">
<Property SpecialFolder = "Drafts"/>
</Folder>
<Folder path = "Draft">
<Property SpecialFolder = "Drafts"/>
</Folder>
<Folder path = "Junk E-mail">
<Property SpecialFolder = "Junk E-mail"/>
</Folder>
<Folder path = "Spam">
<Property SpecialFolder = "Junk E-mail"/>
</Folder>
<Folder path = "Contacts">
<Property Name = "Migration Items/Contacts"/>
</Folder>
<Folder path = "Outbox">
<Property SpecialFolder = "Outbox"/>
</Folder>
<Folder path = "Journal">
<Property SpecialFolder = "Journal"/>
</Folder>
<Folder path = "Notes">
<Property SpecialFolder = "Notes"/>
</Folder>
<Folder path = "Public Folders">
<Property ExcludeFolder = "true"/>
</Folder>

<Folder path = "[Gmail]/All Mail">
<Property ExcludeFolder = "true"/>
</Folder>
<Folder path = "All Mail">
<Property ExcludeFolder = "true"/>
</Folder>
<Folder path = "[Gmail]/Drafts">
<Property SpecialFolder = "Drafts"/>
</Folder>
<Folder path = "[Gmail]/Important">
<Property Name = "Inbox/Important"/>
</Folder>
<Folder path = "[Gmail]/Sent Mail">
<Property SpecialFolder = "Sent Items"/>
</Folder>
<Folder path = "[Gmail]/Spam">
<Property SpecialFolder = "Junk E-mail"/>
</Folder>
<Folder path = "[Gmail]/Starred">
<Property Name = "Inbox/Starred"/>
</Folder>
<Folder path = "[Gmail]/Trash">
<Property SpecialFolder = "Deleted Items"/>
</Folder>

<Folder path = "Follow up">
<Property Name = "Inbox/Follow up"/>
</Folder>
<Folder path = "Misc">
<Property Name = "Inbox/Misc"/>
</Folder>
<Folder path = "Priority">
<Property Name = "Inbox/Priority"/>
</Folder>
</FolderMappings>
Additionally, I had to tell the Internet E-mail Mailbox Migration Wizard to use the "Individual Account Credentials" option since I was able to specify each account password in the CSV file when adding the mailboxes to Microsoft Online Services Migration
Tools console.
Just to note, the users had to manually export their contacts to a CSV file and calendars to iCal (ICS) files in order to import those items into Outlook.
I hope this will benefit others since Microsoft doesn't seem to have a custom, specifically defined migration strategy for this scenario. With Google Apps being in direct competition with BPOS/Office365, I assumed that Microsoft would have a simple
strategy using something like ActiveSync to facilitate the migration of email, contacts, calendar entries, etc. Hopefully we'll see something along those lines become available in a future release of the migration tools.
--Jon Payne

How to migrate File server to NAS device?

All right so here's the scenario.
An external forest level trust is setup between two forests A & B as recently as we acquired the company B.
Users from forest B were already migrated to domain A.
Now I need to migrate file server from domain B to my domain A but the target where we need to move file shares is a NAS device, so basically we cannot do a simple server migration from domain B to domain A.
We need to copy over the data+ACL+Share permissions from fileserver in domain B to a NAS device in domain A whereas of course ACL permissions on file server present in domain B will obviously be as per source domain user accounts, example ACL permissions
currently will show as "B\user1".
So whats the best way to perform this in order to maintain the permissions & data.
Another question how do we copy share permissions from file server to NAS as I can robocopy the data with security permissions but how to copy over all the share permissions to destination NAS?

Hi,
You need to retain the SID History attribute when users across domains to ensure users in the target domain can access to files during migration.
For more detailed information, please refer to the threads below:
ACL migration
http://social.technet.microsoft.com/Forums/exchange/en-US/3c75a116-6bd3-407f-a76c-0d825d4f525a/acl-migration
File server migration using FSMT 1.2 in NAS environment
http://social.technet.microsoft.com/Forums/en-US/fb4bf505-2d95-4409-9777-8fd4a1c0c471/file-server-migration-using-fsmt-12-in-nas-environment?forum=winserverfiles
In additional, you could backup registry key SYSTEM\CurrentControlSet\Services\LanmanServer\Shares to copy share permissions.
Saving and restoring existing Windows shares
http://support.microsoft.com/kb/125996
ADMT and network mapped drives
http://social.technet.microsoft.com/Forums/windowsserver/en-US/9752e31d-2f35-4d7d-ae4d-2f9fe9400bfe/admt-and-network-mapped-drives?forum=winserverDS
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

I have Logic Studio 9.0 media set but need to install onto new Mountain Lion iMac. Migrating from older OS will allow free upgrade from App store but I don't want to migrate due to other issues. How can I install this?

We have a valid serial number and the original 9.0 media set. When I tried migrating the App Store updated it free of charge. However I don't know how to get Logic on without migrating as it point blank refuses when I insert the install disk.
Thanks.

Hi
Something is not quite right here:
I have the original Studio 2 disks here, and the installer runs fine under OSX.8.3. It will install Logic Pro 9.0.0, which can then be updated by downloading the 9.1.7 or 9.1.8 updater from Apple Downloads.
On your system, the installer refuses to run, or does the install proceed, but you are unable to update Logic so that it will work on Mountain Lion?
CCT

How to migrate Mail & Contacts from backup disk of old PPC iMac (10.3.9) to new iMac (10.8.1)?

How to migrate Mail & Contacts from backup disk of old PPC iMac (10.3.9) to new iMac (10.8.1)?
The Firewire disk is connected and have been able to copy across document folders etc, but Migration Assistant doesn't find the disk so that method no good. Any help appreciated.

Thanks, that looks very comprehensive. Wish I'd seen it before completing Set-Up Assistant initially! Will follow his instructions and report back.

How to migrate Oracle 9i(32 bit) to oracle 10g(64 bit) DB with ASM

How to migrate Oracle 9i(32 bit) to oracle 10g(64 bit) DB with ASM on SAME platform RHEL4.0
Scenario My case:
1) DB size 400G.
2) Minimum downtime.
3) oracle 9i(9.2.0.4) source DB.
4) oracle 10g(10.2.0.3) target DB with ASM.
5) Source DB (HOST A) and target DB (HOST B) Machine.
Thanks
Ashutosh

I think Werner is suggesting you ask your question in the appropriate forum.
Go up 2 levels (to Community Discussion Forum) and look for the Database category. It's not that difficult to find, and you will be discussing the question with people who actually care about that kind of question.
The people who read and interact in this forum do so to discuss Documentation questions. Specifically questions about how to improve the documentaiton.

How to migrate LV 5 vi to LV8.5 - do I need to install V6, V7...

Similar Messages

Maybe you are looking for