How to migrate user mappings for datasources?
Is it possible to migrate / export user mapping data from EP6. I know I can add the information manually into the import file format. How do I get the information out of the EP6 system?
Cheers
Richard
Hi
It is not a trivial thing to export passwords from OSX Server. There is an article on afp548.com that explains how to do it although as I remember I don't think it worked 100% all of the time. Besides by the time you have gone through the whole process, most of it using the command line, you may as well have simply defined a password policy forcing all users to change their password at next log-on.
The documents are correct. If you export users and re-import them, passwords are not transferred. If your Server is an Open Directory Master and you archive the LDAP database and then restore it (or in your case transfer it to another server) then passwords are retained. To go from 10.3 Server to 10.5 Server the 10.3 Server must be updated to the latest version for that version of the Server. In addition to this Leopard Server can only be configured in Advanced Mode. This is also true for 10.4. This is if you are upgrading an existing 10.3.9 Server to 10.5 Server. You can promote your 10.3.9 Server to Open Directory Master (on 10.3 you did not need DNS running to be able to do this although it is better if it is), and upgrade to 10.5. Or you can promote to OD Master, archive the LDAP database, demote back to Standalone, backup all relevant data and clean install to Leopard, configure required services and restore the LDAP database once Leopard is an OD Master. This may work. As a safety net I would always export users and groups from the local node anyway. You will have to do this in any case if you went to OD Master as you would have to remove users and groups from the local node and import them into the LDAP node.
Hope this helps, Tony
Similar Messages
-
hi,
how to create user dsn for microsodt access driver(*.mdb,*.accdb) using command line in 64 bit.
i have installed 64 bit drivers and when use following command
C:\Windows\System32>odbccad.exe CONFIGDSN "Microsoft Access Driver (*.mdb,*.accdb)" "DSN=GLDatabase|Description=GL Data Source|DBQ=C:\DataBase\1.mdb"
CONFIGDSN:'unable to create a datasource for the "Microsoft Access Driver (*.mdb,*.accdb)" component not found in the registry with the error code -2147467259
but it works with C:\Windows\SysWow64yes i have installed Microsoft Access Database engine 2010 redistributale => AccessDatabaseEngine_x64.exe
i can able to create user dsn using odbccad32.exe in system32 folder but using command line its not working
C:\Windows\System32>
odbccad.exe CONFIGDSN "Microsoft Access Driver (*.mdb,*.accdb)" "DSN=GLDatabase|Description=GL Data Source|DBQ=C:\DataBase\1.mdb"
CONFIGDSN:'unable to create a datasource for the "Microsoft Access Driver (*.mdb,*.accdb)" component not found in the registry with the error code -2147467259 -
How to create user group for EIS (Executive Information System) KCBA
Dear Experts,
How to create user group for EIS (Executive Information System)
TCode KCBA
Regards
SaurabhHi ,
Check the below link ,hope it will give some inputs for creating groups.
http://help.sap.com/saphelp_470/helpdata/en/5c/c1c81c445f11d189f00000e81ddfac/content.htm
Regards
udayakumar.k -
How to use User exit for MM_MATBEL
Hi
I want to exclude some material documents while archiving a range of material document through archive Object MM_MATBEL.
Can you please suggest how to use user exit for this to exclude the material document while archiving.
Please brief me details.
Thanks,
DebadattaHi Debadatta,
Welcome to SDN.
Have you looked report program <b>RM07MAAU</b> (Report for Material Document Archiving)?
Hope this will help.
Regards,
Ferry Lianto -
How to give user authorizations for a Program or an ICF service
Hi,
1)How to give user authorizations for a report program or an ICF service.
2)How to create an user authorization object.
Regards,
Vinay.check this online help for more info on authorization object creation
http://help.sap.com/saphelp_nw04/helpdata/en/52/67168c439b11d1896f0000e8322d00/frameset.htm
for question no1.
ICF - you either maintain the auth obj relevant at the icf service level itself or you can code call authority object and block access
for abap programs:
you maintain auth object at the tcode or code the call authority object within the program
Regards
Raja -
How to find user exit for a perticular screen?
Dear all,
Can some one tell me how to find user exit for a perticular screen?
ex: MC88 screen can we figure out are there any user exit for that screen!!
Regards,
VjUser exits are built into the Standard SAP code. You just activate them and insert your code into the include programs.
Here is a program that will list the user exits per transaction code. Not perfect, but it may help.
report z_find_user_exit no standard page heading.
tables: tstc, tadir, modsapt, modact,
trdir, tfdir, enlfdir, tstct.
data : jtab like tadir occurs 0 with header line.
data : hotspot(30).
parameters : p_tcode like tstc-tcode obligatory.
at line-selection.
get cursor field hotspot.
check hotspot(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen.
start-of-selection.
perform get_data.
perform write_list.
FORM get_data *
form get_data.
select single * from tstc
where tcode eq p_tcode.
check sy-subrc eq 0.
select single * from tadir
where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
if sy-subrc ne 0.
select single * from trdir
where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir
where pname = tstc-pgmna.
select single * from enlfdir
where funcname = tfdir-funcname.
select single * from tadir
where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name eq enlfdir-area.
endif.
endif.
select * from tadir into table jtab
where pgmid = 'R3TR'
and object = 'SMOD'
and devclass = tadir-devclass.
select single * from tstct
where sprsl eq sy-langu
and tcode eq p_tcode.
endform.
FORM write_list *
form write_list.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(95) sy-uline.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
write:/(95) sy-uline.
loop at jtab.
select single * from modsapt
where sprsl = sy-langu and
name = jtab-obj_name.
format color col_normal intensified off.
write:/1 sy-vline,
2 jtab-obj_name hotspot on,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
endloop.
write:/(95) sy-uline.
describe table jtab.
skip.
format color col_total intensified on.
write:/ 'No of Exits:' , sy-tfill.
else.
format color col_negative intensified on.
write:/(95) 'No User Exit exists'.
endif.
endform.
SMOD, is where you can find the system modifications provided by SAP. CMOD is where you will implement them. If you are looking for all the enhancements provided, then go to CMOD, follow the menu, 'Utilities-->SAP Enhancements'. This will take you to a screen where if you just execute it, you will get all the enhancements provided by SAP.
It is always difficult to find a user exit if all you have is a program name or a transaction code, unless you do a program like Rich suggested. But even there, you will not be able to find user exits that are implemented as sub-routines(also called forms not sapscript forms). Most of the user exits are documented under the corresponding task under IMG structure. So use transaction code SPRO, go to the IMG structure, choose the application area that your program or transaction might be and then you should find a task that talks about enhancements. If you execute that task most often it will take you to CMOD and sometimes to SE38. But all you want to know is there in the documentation attached to the task. Then you can go to CMOD and see which components are there.
Regards,
Amey -
How to create user exit for MIGO check "item OK" Field select/unselect?
Hi All,
I want to know User Exit for MIGO Screen. when I click check button it will be show "Item OK " Field select or not.
MIGO Screen post if Item ok field select both parent id and line id . otherwise it will be show error message?.
Can Please every one tell me how to do user exit for MIGO?
mail id: [email protected]
thanks,
S.Muthu,Hi,
check the BADI <b>MB_MIGO_BADI</b> ( method: POST_DOCUMENT).
COMD enhancment <b>MBCF0005</b>
Regards -
How to find USER-EXIT for tcode - F110
I am new in USER-EXIT Please help how to find USER-EXIT for F110
ASAPHi,
Enhancement/ Business Add-in Description
Enhancement
RFFOX074 Frame for user exit RFFOX074 (in program RFFOCH_U)
RFFOX075 Frame for user exit RFFOX075 (in program RFFOCH_U)
RFFOX081 Frame for user exit RFFOX081 (in program RFFOF__T)
RFFOX082 Frame for user exit RFFOX082 (in program RFFOF__T)
RFFOX100 Frame for user exit RFFOX100 (in program RFFOUS_T)
RFFOX101 Frame for user exit RFFOX101 (in program RFFOUS_T)
RFFOX102 Frame for user exit RFFOX102 (in program RFFOUS_T)
RFFOX103 Frame for user exit RFFOX103 (in program RFFOUS_T)
RFFOX104 user exit
RFFOX105 Frame for user exit RFFOX105 (in program RFFOUS_T)
RFFOX200 Frame for user exit RFFOX200 (in program RFFONZ_T)
RFFOX210 Frame for user exit RFFOX210 (in program RFFOAU_T)
RFFOX211 Frame for user exit RFFOX211 (in program RFFONZ_T)
RFFOX230 General program for user exit RFFOX230 (in program RFFOJP_L)
RFFOX240 Enhancement for User Exit 240 (RFFOAT_P)
RFFOX250 Enhancement for User Exit 250 (RFFODK_E)
RFFOX901 Framework for user exit RFFOX901 (in program RFFOM100)
RFFOX902 Framework for user exit RFFOX902 (in program RFFOM100)
FDTAX001 Enhancement to Transaction FDTA (event after the download)
FEDI0002 Function exits for EDI DOCS in FI - Incoming pyt adv.notes
FEDI0003 Function exits for EDI docs in FI - Save PEXR segments
FEDI0004 Function exits for EDI docs in FI - particular events
FEDI0006 Function Exits for EDI-docs in FI: Save IDCR Segments
RFFOX003 Frame for user exit RFFOX003 (in program RFFOM100)
RFFOX041 Framework for user exit RFFOX041 (in program RFFOBE_I)
RFFOX042 Framework for user exit RFFOX042 (in program RFFOBE_E)
RFFOX043 Framework for user exit RFFOX043 (in program RFFOBE_D)
RFFOX061 Frame for user exit RFFOX061 (in program RFFOCH_P)
RFFOX062 Frame for user exit RFFOX062 (in program RFFOCH_P)
RFFOX063 Frame for user exit RFFOX063 (in program RFFOCH_P)
RFFOX064 Frame for user exit RFFOX064 (in program RFFOCH_P)
RFFOX065 Frame for user exit RFFOX065 (in program RFFOCH_P)
RFFOX066 Frame for user exit RFFOX066 (in program RFFOCH_P)
RFFOX071 Frame for user exit RFFOX071 (in program RFFOCH_U)
RFFOX072 Frame for user exit RFFOX072 (in program RFFOCH_U)
RFFOX073 Frame for user exit RFFOX073 (in program RFFOCH_U)
Business Add-in
FI_BSTM_MC_EXIT FI Account Statement: Exit from MultiCash Conversion
FI_F110_SCHEDULE_JOB F110: Check before scheduling a proposal/update run
No.of Exits: 36
No.of BADis: 2
Arunima -
How to create user in local datasource when UME is already switched to LDAP
HI,
Info : I have portal ( NW 700), recently i switched the datasource of portal to LDAP from local datasource.
issue: if i create user in portal it get created in LDAP, i want create few users in Local datasource.
how to create user in local datasource when UME is already switched to LDAP?
one solution is change the ume back to local datasource > create user > then switch back to LDAP.
do you know any other sol?
Regards
Shridhar GowdaPlease let me know the Datasource file name .. i.e. the .xml filename.
try to analyze this name and see whether you get a solution or post it here.
Reward points if helpful - -
How to migrate the calendars for all users?
At work we have two Mac servers, both running Mountain Lion. I'm looking for a way to migrate the calendars for all the users from server A to server B. I've recreated all the users on the new server, as there are problems with most users on the old server.
I've seen some topics covering backing up calendar data on the server and seen some PostgreSQL related, but nothing seems to apply to Mountain Lion. How do I create a PostgreSQL dump of the calendars? I know I will have to edit the GUID's to make it work on the new server. Or is it as simple as copying the data from /Library/Server/Calendar and Contacts/ to the same location on the new server?At work we have two Mac servers, both running Mountain Lion. I'm looking for a way to migrate the calendars for all the users from server A to server B. I've recreated all the users on the new server, as there are problems with most users on the old server.
I've seen some topics covering backing up calendar data on the server and seen some PostgreSQL related, but nothing seems to apply to Mountain Lion. How do I create a PostgreSQL dump of the calendars? I know I will have to edit the GUID's to make it work on the new server. Or is it as simple as copying the data from /Library/Server/Calendar and Contacts/ to the same location on the new server? -
How to migrate users from wl6.0 to wl6.1
Hi,
how can I move/copy all users from WL6.0sp1 server to the WL6.1sp2 server? In both servers are using fileRealm.
I tried to copy fileRealm.properties to the 6.1 but WebLogic didn't accept old passwords. I copied also SerializedSystemIni.dat, but after that WL didn't start and it gave an fatal error.
Any ideas?
PekkaHello Pekka,
Please open a support case for this. We will work this migration issue out
for you. You can open a case by e-mailing [email protected] or if you have a
support contract just call 888-232-7878.
Joseph Nguyen
BEA Support
"Pekka" <[email protected]> wrote in message
news:3c971d20$[email protected]..
Hi,
how can I move/copy all users from WL6.0sp1 server to the WL6.1sp2 server?In both servers are using fileRealm.
>
I tried to copy fileRealm.properties to the 6.1 but WebLogic didn't acceptold passwords. I copied also SerializedSystemIni.dat, but after that WL
didn't start and it gave an fatal error.
>
Any ideas?
Pekka -
How to use Value Mappings for simple translations?
Hello,
I want to use Value Mappings for simple translations in mappings, e.g. from IDoc to Inhouse structures.
For example unit of quantity:
IDOC --> INHOUSE
PCE P
ABC A
How can I use Value Mapping for this? What should be used as Agency, what should be used for Scheme? What about groups? I tried the following: I created a new Value Mapping in Integration Directory:
- Source Agency: DELVRY05
- Source Scheme: MENEE (IDoc field name)
- Target Acency: INHOUSE_DESADV (Name of structure)
- Target scheme: UNIT (Name of field)
Then, in the table, I added several lines for translating PCE to P and ABC to A and so on. But I have to define a group name for each line. I used INHOUSE. But than I get one INHOUSE group for each line.
This seems very complicated for simple translations from A to B. I don't want to use FixValue in Message mappings.
Any help appreciated.
Thanks,
ChristophHello,
@pavan kumar: Thanks, but I know all Blogs about Value Mappings. That does not help me. And I refer to PI 7.1.
Lets get it very simple: I want to have exactly the same functionality of "FixValues" as ValueMappings. In 7.1, I need to define a Group for every row / line in the conversion table (e.g. for units of measurement conversion between IDoc and FlatFile). That does not make sense for me, as the Group is always the same, e.g. "Unit of measurement". So I will get dozens of same groups called "Unit of measurement".
I don't really understand the concept of Groups. Maybe this is just not appropiate for my intenses? Maybe the Group has to be defined as one specific value of Unit of measurement, e.g. "pieces"?
CHRISTOPH -
How to maintian user exit for a wage type
Hello Experts,
I would like to maintain a user exit for a particular wage type in infotype 14. As the business rules of the client are specific...So, please help me with ur views...
thanksHi
Check the LTA , I am not sure but still you can configure for the medical also .
Now to lapse is again a issue.
Well i think you can do it .
Now how is the main thing , suppose i can give you one example you can get the better way your own.
Now How you are going to put the values from IT 90--- to 15 are you going to put directly ?
Now there is std prog pc00_mXX_remc / remp now check with this program which is suitable for you and add the codings whatever required in the the customized program which you using to put the values to IT15 .
You got it now.
It can be done .
All the best.
Manoj Shakya.
<b>Reminder : Points should be given on answers.</b> -
How to find user exits for a specific field
hi,
How can we find a user exit for a specific fields .
as i know Three ways to search user-exits
1. SE80 look includes in a packages with name user-exits
2. by zreport which will fetch user-exit in a T-CODE
3. SMOD
but what if we have to find a user-exit for particular field for e.g bupla(bussiness place) in MIRO.
Please suggest me.
Thanks and Regards ,
Rahul Singh.Hi Rahul,
Here is the procedure to create field exits.
Step by step procedure for creating Field Exits
There are eight steps to creating a field exit:
Step 1: Determine Data Element
Step 2: Go To Field Exit Transaction
Step 3: Create Field Exit
Step 4: Create Function Module
Step 5: Code Function Module
Step 6: Activate Function Module
Step 7: Assign Program/Screen
Step 8: Activate Field Exit
Step 1: Determine Data Element
u2022 Before you can begin adding the functionality for a field exit, you must know the corresponding data element.
Step 2: Go To Field Exit Transaction
u2022 The transaction to create field exits is CMOD.
u2022 You can use the menu path Tools -> ABAP/4 Workbench -> Utilities -> Enhancements -> Project management.
u2022 From the initial screen of transaction CMOD, choose the Text enhancements -> Field exits menu path.
u2022 After choosing this menu path, you will be taken to the field exits screen. From here, you can create a field exit.
NOTE : Even though you use transaction CMOD to maintain field exits, you do not need to create a project to activate field exits.
Step 3: Create Field Exit
u2022 From the field exit screen of transaction CMOD, choose the Field exit -> Create menu path.
u2022 After choosing this menu path, a dialog box will prompt you for the appropriate data element .
u2022 Enter the data element name and click the u2018Continueu2019 pushbutton.
u2022 Now, you will be able to create the function module associated to the data elementu2019s field exit.
Step 4: Create Function Module
u2022 You will automatically be taken to the Function Library (SE37) after entering a data element name and clicking the u2018Continueu2019 pushbutton.
u2022 In the u2018Function moduleu2019 field, a function module name will be defaulted by the system based on the data element specified. This name will have the following convention:
FIELD_EXIT_<data element>
u2022 You can add an identifier (an underscore followed by a single character ).
u2022 The first function module for a data elementu2019s field exit must be created without an identifier.
u2022 To create the function module, click on the u2018Createu2019 pushbutton, choose menu path Function module -> Create, or press u2018F5u2019.
u2022 After choosing to create the function module, you will get the warning: "Function module name is reserved for SAP". This message is just a warning so a developer does not accidentally create a function module in the field exit name range. By pressing u2018Enteru2019, you will be able to go ahead and create the function module.
u2022 Before coding the function module, you will have to specify the function modules attributes -- function group, application, and short text.
Step 5: Code Function Module
u2022 From the function moduleu2019s attributes screen, click on the u2018Source codeu2019 pushbutton or choose the Goto -> Function module menu path to the code of the function module.
u2022 Here you will add your desired functionality for the field exit.
u2022 Remember that field exitu2019s function module will have two parameters -- one importing parameter called "INPUT" and one exporting parameter called "OUTPUT". These parameters will be set up automatically by the system.
u2022 You must remember to assign a value to the OUTPUT field. Even if the value does not change, it must be moved from the INPUT field to the OUTPUT field.
Step 6: Activate Function Module
u2022 After coding the function module, you must remember to activate it.
u2022 Use the Function module -> Activate menu path to activate the function module.
u2022 At this point, you can return to the field exit transaction.
u2022 You should be able to 'green arrow' back to this transaction.
u2022 When you return to the field exit transaction, you will see an entry for the newly created field exit.
u2022 At this point, the field exit is global. That is, it applies to all screens that use a particular data element. On any screen that uses the data element, the corresponding field exit function module will be triggered, once it is active.
u2022 Also, the field exit will not be triggered yet because it is inactive.
Step 7: Assign Program/Screen
u2022 This step is only needed if you want to make a field exit local.
u2022 To make a field exit local, select the field exit and click on the u2018Assign prog./screenu2019 pushbutton.
u2022 In the dialog box , indicate the appropriate program name and screen number.
This information indicates that the field exit is local to the specified screen in the specified program.
u2022 In the dialog box, you determine which function module gets executed for the field exit by specifying the identifier in the u2018Fld. Exitu2019 field.
u2022 If this field is left blank, the function module triggered will be 'FIELD_EXIT_<data element>'.
u2022 If a single-character identifier is entered into the field, the function module triggered will be 'FIELD_EXIT_<data element>_<identifier>'.
Step 8: Activate Field Exit
u2022 The field exit must be active for it to be triggered by the system.
u2022 Activate the field exit by choosing the Field exit -> Activate menu path.
u2022 After assigning the field exit to a change request, its status will change to u2018Activeu2019 and it will be triggered automatically on the appropriate screen(s).
NOTE : In order to activate the field exit the profile parameter abap/fieldexit = YES must be set on all application servers
Execute the transaction SE38 with PROGRAM NAME - RSMODPRF
Then give the Data Element Name for which field you want to create the exit(Just cross check with your field data element) and execute.
then it takes you to SE37 with the function module name FIELD_EXIT_<DATA ELEMENT NAME> and then create the same function module.
and in the coding part, You can write your logic to display the output of that field. and activate it.
once you complete the above,
Again execute SE38 transaction with program RSMODPRF and again click on Execute button without any Data Element Name. Now you select the data element which you have created and click on Assign prog/ Screen button and assign the program name and screen number of the filed and click on the menu Field Exit and Activate.
Hope it helps.
Regards
Radhika
Edited by: Radhika Pande on Nov 26, 2009 7:58 AM -
How to create users in/for FDQM mapping maintenace
Client wants to know that is it possible to create users in/for FDQM with different rights. Like for example the admin user will be overall responsible for mapping maintenace and data load but they also want to make a user just for mapping maintenace and it should not have the right to load data. Is this possible and if yes then how?
Thanks in advance.
RegardsUser maintenance is simply used for assigning location access for users, shared services determines the role to user has i.e. Admistrator or Intermediate 1-9 etc. If you take a look at object maintenance you will see that you can make all the FDM objects listed there only available for certain roles by default most of these are set to All Intermediate or Administartor. What I would do is create a more targetted obect security model and then through the allocation of the appropriate Intermediate roles you should be able to achieve the functionality your client is requesting
Maybe you are looking for
-
How to "telnet" and run commands on another computer?
I have a Unix program. I need this to "telnet" to a Windows computer and run commands (via the prompt in Windows). Is there a way to do this in java? Also it is something that will be a cron job so the password will be stored in a file rather than th
-
Mac Os x Lion(10.7)
So, I live in South Africa and my late 2006 iMac could support mac os 10.7 (Lion). The purchase has been removed from the app-store, but some 3rd party apps require Lion to run. I can't upgrade to mountain or mavericks. So, is there a way that me in
-
hi all, i have written a basic authentication code it works with a bug, my bug is if i copy my url( when in login) and paste it after i logout , iam able to see my session page,my session has already expired but how do iam able to see that. i invalid
-
Error trying to open Illustrator CC
Illustrator has been working fine on a colleagues computer, however from yesterday it has refused to open. The following error messages are displayed: Not enough memory (RAM) pdfformat.aip plugin is missing We're running the 64bit version on Windows
-
How to retrieve apps I paid for nd not backed up on pc
I restored my iPad2 and lost all info, I had apps I paid for and silly me did not back up on my pc which I thought I did. Is there a way I can get my paid apps back and how?